A single-solenoid pulsed-magnet system for single-crystal scattering studies

We present a pulsed-magnet system that enables x-ray single-crystal diffraction in addition to powder and spectroscopic studies with the magnetic field applied on or close to the scattering plane. The apparatus consists of a single large-bore solenoid, cooled by liquid nitrogen. A second independent closed-cycle cryostat is used for cooling samples near liquid helium temperatures. Pulsed magnetic fields close to ~30 T with a zero-to-peak-field rise time of ~2.9 ms are generated by discharging a 40 kJ capacitor bank into the magnet coil. The unique characteristic of this instrument is the preservation of maximum scattering angle (~23.6°) on the entrance and exit sides of the magnet bore by virtue of a novel double-funnel insert. This instrument will facilitate x-ray diffraction and spectroscopic studies that are impractical, if not impossible, to perform using split-pair and narrow-opening solenoid magnets. Furthermore, it offers a practical solution for preserving optical access in future higher-field pulsed magnets.     

Miniature pulsed magnet system for synchrotron x-ray measurements

We have developed a versatile experimental apparatus for synchrotron x-ray measurements in pulsed high magnetic fields. The apparatus consists of a double cryostat incorporating a liquid nitrogen bath to cool the miniature pulsed coil and an independent helium flow cryostat allowing sample temperatures from 4 up to 250 K. The high duty cycle miniature pulsed coils can generate up to 38 T. During experiments at 30 T a repetition rate of 6 pulsesmin was routinely reached. Using a 4 kJ power supply, the pulse duration was between 500 mus and 1 ms. The setup was used for nuclear forward scattering measurements on 57Fe up to 25 T on the ESRF beamline ID18. In another experiment, x-ray magnetic circular dichroism was measured up to 30 T on the ESRF energy dispersive beamline ID24.     

High sensitivity magnetometer for measuring the isotropic and anisotropic magnetisation of small samples

We describe how the full, isotropic and anisotropic, magnetisation of samples as small as tens of micrometers in size can be sensitively measured using a piezoresistive microcantilever and a small, moveable ferromagnet. Depending on the position of the ferromagnet, a strong but highly local field gradient of up to ～4200 T/m can be applied at the sample or removed completely during a single measurement. In this way, the magnetic force and torque on the sample can be independently determined without moving the sample or cycling the experimental system. The technique can be used from millikelvin temperatures to ～85 K and in magnetic fields from 2 T to the highest fields available. We demonstrate its application in measurements of the semimagnetic semiconductor Hg(1 - x)Fe(x)Se, where we achieved a moment sensitivity of better than 2.5 × 10(-14) J/T for both isotropic and anisotropic components.     

A small-angle scattering chamber for x-ray photon correlation spectroscopy at low temperatures

A low temperature sample environment for x-ray photon correlation spectroscopy measurements in small-angle scattering geometry is presented. The chamber has been designed to allow investigations of dynamical phenomena in supercooled liquids and the typical working temperature range is 110-330 K with a thermal stability ΔT/T down to 10(-4). A variable external magnetic field up to 0.12 T can be applied, which is of interest in studies of, e.g., ferrofluids and liquid crystalline materials. Here, technical details about the sample environment are given together with examples of recent applications.     

Development of an x-ray diffraction camera used in magnetic fields up to 10 T

A high-field x-ray diffraction (HF-XRD) camera was developed to observe structural changes of magnetic materials in magnetic fields up to 10 T. The instrument mainly consists of a Debye-Scherrer-type camera with a diameter of 80.1 mm, a 10-T cryocooled superconducting magnet with a 100-mm room-temperature bore, an x-ray source, a power supply, and a chiller for the x-ray source. An x-ray detector (image plate) in the HF-XRD camera can be taken out and inserted into the magnet without changing the sample position. The performance of the instrument was tested by measuring the HF-XRD for silicon and ferromagnetic MnBi powders. A change of x-ray diffraction pattern was observed due to the magnetic orientation of MnBi, showing that the instrument is useful for studying field-induced orientation processes and structural properties of field-controlled materials.     

缺陷散射对相控阵超声全聚焦成像的影响研究

相控阵超声全聚焦成像充分利用了检测信号,具有成像精度高、可进行缺陷识别等特点,是未来最具应用前景的相控阵成像算法之一。然而,目前相控阵超声全聚焦成像仍不能实现缺陷的高分辨率成像,无法对缺陷进行准确的定性、定量分析。为此,采用有限元仿真相控阵传感器的全阵列采集(FMC)过程,在全矩阵数据的基础上设计全聚焦成像程序,对圆孔和裂纹两种典型缺陷进行TFM成像,研究典型缺陷的TFM成像规律,从缺陷散射的角度分析影响相控阵超声全聚焦成像的因素。结果表明,实际检测中相控阵超声传感器只能接收到缺陷的部分散射信息,而相控阵超声在缺陷处的散射场分布与缺陷的类型、尺寸、角度及入射波类型、入射角度等因素有关,因此能否接收到缺陷散射的主要能量是影响全聚焦成像精度的关键。     

Instrument for x-ray magnetic circular dichroism measurements at high pressures

An instrument has been developed for x-ray magnetic circular dichroism (XMCD) measurements at high pressures and low temperatures. This instrument couples a nonmagnetic copper-beryllium diamond anvil cell featuring perforated diamonds with a helium flow cryostat and an electromagnet. The applied pressure can be controlled in situ using a gas membrane and calibrated using Cu K-edge x-ray absorption fine structure measurements. The performance of this instrument was tested by measuring the XMCD spectra of the Gd(5)Si(2)Ge(2) giant magnetocaloric material.     

Development and application of setup for ac magnetic field in neutron scattering experiments

We report on a new setup developed for neutron scattering experiments in periodically alternating magnetic fields at the sample position. The assembly consisting of rf generator, amplifier, wide band transformer, and resonance circuit. It allows to generate homogeneous ac magnetic fields over a volume of a few cm(3) and variable within a wide range of amplitudes and frequencies. The applicability of the device is exemplified by ac polarized neutron reflectometry (PNR): a new method established to probe remagnetization kinetics in soft ferromagnetic films. Test experiments with iron films demonstrate that the ac field within the accessible range of frequencies and amplitudes produces a dramatic effect on the PNR signal. This shows that the relevant ac field parameters generated by the device match well with the scales involved in the remagnetization processes. Other possible applications of the rf unit are briefly discussed.     

Characterization of spectroscopic photoemission and low energy electron microscope using multipolarized soft x rays at BL17SU/SPring-8

Spectroscopic photoemission and low energy electron microscope (SPELEEM) improved its performance after installation at BL17SU/SPring-8, where a multipolarization-mode undulator is employed to produce circularly and linearly polarized soft x rays. This undulator enables us to study the domain structures of ferromagnetic and antiferromagnetic materials by x-ray magnetic circular dichroism and x-ray magnetic linear dichroism. SPELEEM is used to study light elements (C, N, and O), 3d transition-metal elements and 4f rare earth elements, utilizing a wide range of photon energies. The two cylindrical mirrors adopted in front of SPELEEM ensure an illumination area of 14 x 14 microm(2) on the samples. The lateral resolution of a secondary electron photoemission electron microscope image is estimated to be better than 85 nm, whereas the energy resolution of the instrument is better than 0.4 eV.     

Synchrotron x-ray spectroscopy of EuHNO3 aqueous solutions at high temperatures and pressures and Nb-bearing silicate melt phases coexisting with hydrothermal fluids using a modified hydrothermal diamond anvil cell and rail assembly

A modified hydrothermal diamond anvil cell (HDAC) rail assembly has been constructed for making synchrotron x-ray absorption spectroscopy, x-ray fluorescence, and x-ray mapping measurements on fluids or solid phases in contact with hydrothermal fluids up to approximately 900 degrees C and 700 MPa. The diamond anvils of the HDAC are modified by laser milling grooves or holes, for the reduction of attenuation of incident and fluorescent x rays and sample cavities. The modified HDAC rail assembly has flexibility in design for measurement of light elements at low concentrations or heavy elements at trace levels in the sample and the capability to probe minute individual phases of a multiphase fluid-based system using focused x-ray microbeam. The supporting rail allows for uniform translation of the HDAC, rotation and tilt stages, and a focusing mirror, which is used to illuminate the sample for visual observation using a microscope, relative to the direction of the incident x-ray beam. A structure study of Eu(III) aqua ion behavior in high-temperature aqueous solutions and a study of Nb partitioning and coordination in a silicate melt in contact with a hydrothermal fluid are described as applications utilizing the modified HDAC rail assembly.     

A Study of Torn and Folded Metal (TFM) on Honed Cylinder Bore Surfaces

Torn and folded metal (TFM) on honed cylinder bore surfaces has been observed and studied for decades. However, there is no objective and quantitative method for ranking the severity of TFM. Studies on its effect on the scuffing resistance of a cylinder bore and piston skirt/piston ring are also very limited. Machined surfaces are currently evaluated and ranked qualitatively based on fax film images. The results may vary greatly depending upon the individual's experience and also the image quality. In this study, an attempt has been made to develop a method that can be used to evaluate cylinder bore surfaces objectively. A “surface index” has been developed for classifying honed bore surfaces. To further examine the effect of TFM on a cylinder bore performance, bench tests have been conducted to evaluate cylinder bore scuffing resistance and its correlation with the bore surface quality in terms of the value of the surface index.     

Application of a new composite cubic-boron nitride gasket assembly for high pressure inelastic x-ray scattering studies of carbon related materials

We have developed a new composite cubic-boron nitride (c-BN) gasket assembly for high pressure diamond anvil cell studies, and applied it to inelastic x-ray scattering (IXS) studies of carbon related materials in order to maintain a larger sample thickness and avoid the interference from the diamond anvils. The gap size between the two diamond anvils remained ~80 μm at 48.0 GPa with this new composite c-BN gasket assembly. The sample can be located at the center of the gap, ~20 μm away from the surface of both diamond anvils, which provides ample distance to separate the sample signal from the diamond anvils. The high pressure IXS of a solvated C(60) sample was studied up to 48 GPa, and a pressure induced bonding transition from sp(2) to sp(3) was observed at 27 GPa.     

Plasma ion source for in situ ion bombardment in a soft x-ray magnetic scattering diffractometer

A new plasma ion source for in situ keV He ion bombardment of solid state samples or thin films was designed and built for ion fluences between 1 × 10(12) and 1 × 10(17) ions/cm(2). The system was designed to be mounted to different diffraction chambers for soft x-ray resonant magnetic scattering. Without breaking the vacuum due to He-ion bombardment, structural and magnetic modifications of the samples can be studied in situ and element specifically.     

A multi-crystal wavelength dispersive x-ray spectrometer

A multi-crystal wavelength dispersive hard x-ray spectrometer with high-energy resolution and large solid angle collection is described. The instrument is specifically designed for time-resolved applications of x-ray emission spectroscopy (XES) and x-ray Raman scattering (XRS) at X-ray Free Electron Lasers (XFEL) and synchrotron radiation facilities. It also simplifies resonant inelastic x-ray scattering (RIXS) studies of the whole 2d RIXS plane. The spectrometer is based on the Von Hamos geometry. This dispersive setup enables an XES or XRS spectrum to be measured in a single-shot mode, overcoming the scanning needs of the Rowland circle spectrometers. In conjunction with the XFEL temporal profile and high-flux, it is a powerful tool for studying the dynamics of time-dependent systems. Photo-induced processes and fast catalytic reaction kinetics, ranging from femtoseconds to milliseconds, will be resolvable in a wide array of systems circumventing radiation damage.     

The use of symmetry to correct Larmor phase aberrations in spin echo scattering angle measurement

Spin echo scattering angle measurement (SESAME) is a sensitive interference technique for measuring neutron diffraction. The method uses waveplates or birefringent prisms to produce a phase separation (the Larmor phase) between the "up" and "down" spin components of a neutron wavefunction that is initially prepared in a state that is a linear combination of in-phase up and down components. For neutrons, uniformly birefringent optical elements can be constructed from closed solenoids with appropriately shaped cross sections. Such elements are inconvenient in practice, however, both because of the precision they demand in the control of magnetic fields outside the elements and because of the amount of material required in the neutron beam. In this paper, we explore a different option in which triangular-cross-section solenoids used to create magnetic fields for SESAME have gaps in one face, allowing the lines of magnetic flux to "leak out" of the solenoid. Although the resulting field inhomogeneity produces aberrations in the Larmor phase, the symmetry of the solenoid gaps causes the aberrations produced by neighboring pairs of triangular solenoids to cancel to a significant extent. The overall symmetry of the SESAME apparatus leads to further cancellations of aberrations, providing an architecture that is easy to construct and robust in performance.     

Invited article: the fast readout low noise camera as a versatile x-ray detector for time resolved dispersive extended x-ray absorption fine structure and diffraction studies of dynamic problems in materials science, chemistry, and catalysis

Originally conceived and developed at the European Synchrotron Radiation Facility (ESRF) as an "area" detector for rapid x-ray imaging studies, the fast readout low noise (FReLoN) detector of the ESRF [J.-C. Labiche, ESRF Newsletter 25, 41 (1996)] has been demonstrated to be a highly versatile and unique detector. Charge coupled device (CCD) cameras at present available on the public market offer either a high dynamic range or a high readout speed. A compromise between signal dynamic range and readout speed is always sought. The parameters of the commercial cameras can sometimes be tuned, in order to better fulfill the needs of specific experiments, but in general these cameras have a poor duty cycle (i.e., the signal integration time is much smaller than the readout time). In order to address scientific problems such as time resolved experiments at the ESRF, a FReLoN camera has been developed by the Instrument Support Group at ESRF. This camera is a low noise CCD camera that combines high dynamic range, high readout speed, accuracy, and improved duty cycle in a single image. In this paper, we show its application in a quasi-one-dimensional sense to dynamic problems in materials science, catalysis, and chemistry that require data acquisition on a time scale of milliseconds or a few tens of milliseconds. It is demonstrated that in this mode the FReLoN can be applied equally to the investigation of rapid changes in long range order (via diffraction) and local order (via energy dispersive extended x-ray absorption fine structure) and in situations of x-ray hardness and flux beyond the capacity of other detectors.     

Quantitative measurements of magnetic stray field dynamics of Permalloy particles in a photoemission electron microscopy

By example of a Permalloy particle (40 × 40 μm(2) size, 30 nm thickness) we demonstrate a procedure to quantitatively investigate the dynamics of magnetic stray fields during ultrafast magnetization reversal. The measurements have been performed in a time-resolving photoemission electron microscope using the X-ray magnetic circular dichroism. In the particle under investigation, we have observed a flux-closure-dominated magnetic ground structure, minimizing the magnetic stray field outside the sample. A fast magnetic field pulse introduced changes in the micromagnetic structure accompanied with an incomplete flux closure. As a result, stray fields arise along the edges of domains, which cause a change of contrast and an image deformation of the particles geometry (curvature of its edge). The magnetic stray fields are calculated from a deformation of the X-ray magnetic circular dichroism (XMCD) images taken after the magnetic field pulse in a 1 ns interval. These measurements reveal a decrease of magnetic stray fields with time. An estimate of the lower limit of the domain wall velocity yields about 2 × 10(3) m s(-1).     

The use of helium gas to reduce beam scattering in high vapour pressure scanning electron microscopy applications

Both image quality and the accuracy of x-ray analysis invariable pressure scanning electron microscopes (VPSEMs) are often limited by the spread of the primary electronbeam due to scattering by the introduced gas. The degree of electron scattering depends partly on the atomic number Z of the gas, and the use of a low Z gas such as helium should reduce beam scattering and enhance image quality. Using anuncoated test sample of copper iron sulphide inclusions in calcium fluorite, we show that the reduction in beam scatter produced by helium is more than sufficient to compensate for its reduced efficiency of charge neutralisation. The relative insensitivity to pressure of x-ray measurements in a helium atmosphere compared with air, and the consequent ability to work over a wider range of working distances, pressures, and voltages, make helium potentially the gas of choice for many routine VPSEM applications.     

Extensional rheometer for in situ x-ray scattering study on flow-induced crystallization of polymer

We designed and constructed an extensional rheometer for in situ small and wide angle x-ray study on flow-induced crystallization of polymer. Two rotating drums with an axis distance of 20 mm are employed to impose extensional deformation on the samples. With a constant angular velocity, the two drums generate a constant Henkcy strain rate as sample length for testing keeps constant during deformation. An ionic liquid is used as heating medium to prevent polymer melt from bending downward due to gravity, which is excellent in terms of high thermal stability, low viscosity, and relative low adsorption on x-ray. Flow-induced crystallization experiments are conducted with this apparatus on x-ray scattering station in Shanghai Synchrotron Radiation Facility (SSRF), which allows us to collect rheological and structural data simultaneously and may lead to a better understanding on flow-induced crystallization of polymer.