Position-based force tracking adaptive impedance control strategy for robot grinding complex surfaces system

As a key technology of robot grinding, force control has great influence on grinding effects. Based on the traditional impedance control, a position-based force tracking adaptive impedance control strategy is proposed to improve the grinding quality of aeroengine complex curved parts, which considers the stiffness damping environmental interaction model, modifies the reference trajectory by a Lyapunov-based approach to realize the adaptive grinding process. In addition, forgotten Kalman filter based on six-dimensional force sensor is used to denoise the force information and a three-step gravity compensation process including static base value calculation, dynamic zero update and contact force real-time calculation is proposed to obtain the accurate contact force between tool and workpiece in this method. Then, to verify the effectiveness of the proposed method, a simulation experiment which including five different working conditions is conducted in MATLAB, and the experiment studying the deviation between the reference trajectory and the actual position is carried out on the robot grinding system. The results indicate that the position-based force tracking adaptive impedance control strategy can quickly respond to the changes of environmental position, reduce the fluctuation range of contact force in time by modifying the reference trajectory, compensate for the defect of the steady-state error of the traditional impedance control strategy and improve the surface consistency of machined parts.     

基于力阻抗模型的上肢康复机器人交互控制系统设计

传统上肢康复机器人交互控制系统受到奇异位形影响,导致系统控制精准度较低,为此提出基于力阻抗模型的上肢康复机器人交互控制系统;设计上肢康复机器人交互控制系统结构,选取双串口12CSA60S2系列单片机作为下位机控制核心模块,利用椎齿轮改变驱动力方向,设计机械臂肘部结构,通过同步带传动,将器件隐藏于空手柄中;设计机械臂腕部结构,满足临床康复时上肢患者站姿与坐姿训练需求;选择箔式应变片BF350力传感器,设计电阻应变片桥接电路,处理传输信号;构建机器人目标阻抗模型,设计基于力阻抗控制策略,调节位置、速度和关节;为改善奇异位形情况,在奇异位形附近关节角速度指令直接由各个关节力矩阻尼控制得到,实现角速度精准输出,完成系统控制;由实验结果可知,该系统直线运动位置、旋转关节位置和伸缩关节位置跟踪结果与标准值基本一致,满足系统设计需求。     

实时上肢参数辨识的康复机器人力控制研究

针对病人进行康复训练时,上肢动力学参数估计不准确和训练过程发生上肢动力学参数变化,所导致康复机器人系统辅助力计算不准确,影响精确和稳定的控制练训。为减小辅助力计算误差,实现精确和稳定的训练控制,基于阻抗控制算法,使用多元线性回归方法对上肢动力学参数进行辨识,提出了一种实时上肢动力学参数辨识的阻抗控制算法,建立了康复机器人动力学模型,同时对控制算法进行仿真研究。仿真结果表明该算法能够准确地对上肢动力学参数进行辨识,有效地消除了辅助力计算误差,实现训练过程中训练轨迹精确控制。     

sEMG-based impedance control for lower-limb rehabilitation robot

Recently, various rehabilitation robots have been developed for therapeutic exercises. Additionally, several control methods have been proposed to control the rehabilitation robots based on user’s motion intention. One of the common control methods used is torque-based impedance control. This paper presents an electromyogram-based robust impedance control for a lower-limb rehabilitation robot using a voltage-based strategy. The proposed control strategy uses surface electromyogram (sEMG) signals in place of force sensors to estimate the exerted force. In addition, the control is based on the voltage control strategy, which differs from the common torque control strategies. For example, unlike the torque-based impedance control, the controller is not dependent on the dynamical models of the patient and the robot. This is particularly important as the dynamic of the patient is both difficult to model precisely and changes during the rehabilitation period. These simplifications results in a significant reduction in calculation time. To illustrate the effectiveness of the control approach, a 1-DOF lower-limb rehabilitation robot is designed. Experimental sEMG-force data are collected and used to train an artificial neural network. Simulation results show that compared with a torque-based control approach, the voltage-based is simpler, less computational and more efficient while it considers the presence of actuators. Finally, we design an adaptive fuzzy system to estimate and compensate the uncertainty in performing the impedance rule. The adaptive fuzzy system has an advantage that does not need new feedback to estimate the uncertainty. The control approach is further verified by stability analysis. Simulation results show the efficiency of the control approach in performing some therapeutic exercises.     

基于指尖力传感器的HIT 机器人灵巧手笛卡尔阻抗控制

介绍了基于5维指尖力／力矩传感器的HIT机器人灵巧手的笛卡尔阻抗控制．当手指与障碍物接触时，呈现出2阶机械阻抗特性．在阻抗控制算法中，不需直接计算加速度，从而避免了因大加速度误差给控制带来的不利因素．结合期望轨迹和实际位置及速度，产生一个参考轨迹，手指跟踪此参考轨迹即可自动获得期望阻抗特性．     

Nonlinear robust adaptive Cartesian impedance control of UAVs equipped with a robot manipulator

In this paper, a new nonlinear robust adaptive impedance controller is addressed for Unmanned Aerial Vehicles (UAVs) equipped with a robot manipulator that physically interacts with environment. A UAV equipped with a robot manipulator is a novel system that can perform different tasks instead of human being in dangerous and/or inaccessible environments. The objective of the proposed robust adaptive controller is control of the UAV and its robotic manipulator’s end-effector impedance in Cartesian space in order to have a stable physical interaction with environment. The proposed controller is robust against parametric uncertainties in the nonlinear dynamics model of the UAV and the robot manipulator. Moreover, the controller has robustness against the bounded force sensor inaccuracies and bounded unstructured modeling (nonparametric) uncertainties and/or disturbances in the system. Tracking performance and stability of the system are proved via Lyapunov stability theorem. Using simulations on a quadrotor UAV equipped with a three-DOF robot manipulator, the effectiveness of the proposed robust adaptive impedance controller is investigated in the presence of the force sensor error, and parametric and non-parametric uncertainties.     

基于自适应阻抗控制的轴孔装配方法

提出了一种基于自适应阻抗控制的轴孔装配方法,它能根据得到的力信息,按照自适应调整律对机器人末端的参考位置进行修正,使得轴始终朝着减小卡阻力的方向运动,最终完成插轴入孔的动作.其算法简单,计算量小,修正量的计算可以在线进行,故能满足实时控制的要求.仿真结果表明了这种方法的有效性.     

基于阻抗模型的下肢康复机器人交互控制系统设计

为帮助下肢功能障碍患者进行康复训练,设计了下肢康复机器人。对于该机器人的控制,采用传统系统无法柔顺控制,导致机器人运动轨迹偏离预设轨迹。针对该现象,提出了基于阻抗模型的下肢康复机器人交互控制系统设计。通过分析总体控制方案,设计系统硬件结构框图。采用L型二维力传感器,确定两个方向的人机交互力。使用绝对值编码器安装在各个关节处,其输出值作为髋关节、膝关节、踝关节电机的转动位置,增量编码器安装在电机轴上,测量值用来作为后期控制方法的输入参数。构建阻抗控制模型,能够调节机器人位置和速度,具有消除力误差功能。依据此力矩对参考运动轨迹进行设计,实时获取患者康复训练的跟踪、主动柔顺和接近状态信息。在柔顺训练实验测出人机交互力,通过实验结果知,在检测到人体主动力矩异常时,系统能够重新优化轨迹,具有良好柔顺控制效果。     

Muscle circumference sensor and model reference-based adaptive impedance control for upper limb assist exoskeleton robot

In this paper, we have addressed two issues for upper limb assist exoskeleton: (1) estimation of human desired motion intention (DMI) using non-biological-based sensors; and (2) compliant control using model reference-based adaptive approach. For non-biological-based DMI estimation, we have employed Muscle Circumference Sensor (MCS) and load cells. MCS measures human elbow joint torque using human arm kinematics, biceps/triceps muscle model, and physiological cross-sectional area of these muscles. So, using MCS, we have measured Biceps/Triceps internal muscle activity and we have tried to reduce it by providing robotic assistance. To extract DMI, we have employed radial basis function neural network (RBFNN). RBFNN uses position, velocity, and human force to estimate DMI which is further tracked by the impedance control law. This algorithm is based on model reference-based adaptive impedance control law which drives the overall assist exoskeleton to the desired reference impedance model, giving required compliance. To highlight the effectiveness, we have compared proposed control algorithm with simple impedance and adaptive impedance control algorithms. Experimental results demonstrate the reduced muscle activity and active compliance for subject wearing the robot.     

Fuzzy logic based adaptive admittance control of a redundantly actuated ankle rehabilitation robot

Ankle rehabilitation robots have recently attracted great attention since they provide various advantages in terms of rehabilitation process from the viewpoints of patients and therapists. This paper presents development and evaluation of a fuzzy logic based adaptive admittance control scheme for a developed 2-DOF redundantly actuated parallel ankle rehabilitation robot. The proposed adaptive admittance control scheme provides the robot to adapt resistance/assistance level according to patients' disability level. In addition, a fuzzy logic controller (FLC) is developed to improve the trajectory tracking ability of the rehabilitation robot subject to external disturbances which possibly occur due to human-robot interaction. The boundary scales of membership functions of the FLC are tuned using cuckoo search algorithm (CSA). A classical proportional-integral-derivative (PID) controller is also tuned using the CSA to examine the performance of the FLC. The effectiveness of the adaptive admittance control scheme is observed in the experimental results. Furthermore, the experimental results demonstrate that the optimized FLC significantly improves the tracking performance of the ankle rehabilitation robot and decreases the steady-state tracking errors about 50% compared to the optimized PID controller. The performances of the developed controllers are evaluated using common error based performance indices indicating that the FLC has roughly 50% better performance than the PID controller.     

一种基于肌电信号的自适应人机交互控制方法

针对踝关节康复机器人运动过程中的人机交互性问题,本文提出一种基于肌电信号的鲁棒自适应人机交互控制方法.针对患者难以保持某一动作、肌电信号微弱等特点,提出一种新的关节角度估计方法.该方法充分利用了踝关节运动时胫骨前肌与腓肠肌的拮抗关系,将踝关节的动作类型与单个肌肉群的收缩进行关联,利用归一化的特征值完成运动意图的辨识和运动角度的估计.为了保证人机交互的安全性,提出一种刚度、阻尼参数在线自适应调节的阻抗控制算法.基于交互力矩对机器人末端的运动角度与运动速度实时进行调节,使其对外表现出等效柔性.实验研究表明所提出的人机交互控制方法是有效的,并具有一定应用前景.     

Two adaptive control structures of robot manipulators

This paper proposes two simple adaptive control schemes of robot manipulators. The first one is the state feedback control which consists of feedforward from the desired position trajectory, PD feedback from the actual trajectory, and an auxiliary input. The second one is the feedforward/feedback control which consists of a feedforward term from the desired position, velocity, and acceleration trajectory based on the inverse of robot dynamics. The feedforward, feedback, and auxiliary gains are adapted using simple equations derived from the decentralized adaptive control theory based on Lyapunov's direct method, and using only the local information of the corresponding joint. The proposed control schemes are computationally fast and do not require a priori knowledge of the detail parameters of the manipulator or the payload. Simulation results are presented in support of the proposed schemes. The results demonstrate that both controllers perform well with bounded adaptive gains.     

Model reference adaptive impedance control for physical human-robot interaction

This paper presents a novel enhanced human-robot interaction system based on model reference adaptive control. The presented method delivers guaranteed stability and task performance and has two control loops. A robot-specific inner loop, which is a neuroadaptive controller, learns the robot dynamics online and makes the robot respond like a prescribed impedance model. This loop uses no task information, including no prescribed trajectory. A task-specific outer loop takes into account the human operator dynamics and adapts the prescribed robot impedance model so that the combined human-robot system has desirable characteristics for task performance. This design is based on model reference adaptive control, but of a nonstandard form. The net result is a controller with both adaptive impedance characteristics and assistive inputs that augment the human operator to provide improved task performance of the human-robot team. Simulations verify the performance of the proposed controller in a repetitive point-to-point motion task. Actual experimental implementations on a PR2 robot further corroborate the effectiveness of the approach.     

Adaptive hybrid force/position control of robot manipulators using an adaptive force estimator in the presence of parametric uncertainty

This study is devoted to sensorless adaptive force/position control of robot manipulators using a position-based adaptive force estimator (AFE) and a force-based adaptive environment compliance estimator. Unlike the other sensorless method in force control that uses disturbance observer and needs an accurate model of the manipulator, in this method, the unknown parameters of the robot can be estimated along with the force control. Even more, the environment compliance can be estimated simultaneously to achieve tracking force control. In fact, this study deals with three challenging problems: No force sensor is used, environment stiffness is unknown, and some parametric uncertainties exist in the robot model. A theorem offers control laws and updating laws for two control loops. In the inner loop, AFE estimates the exerted force, and then, the force control law in the outer loop modifies the desired trajectory of the manipulator for the adaptive tracking loop. Besides, an updating law updates the estimated compliance to provide an accurate tracking force control. Some experimental results of a PHANToM Premium robot are provided to validate the proposed scheme. In addition, some simulations are presented that verify the performance of the controller for different situations in interaction.     

模糊自适应在机器人行走平衡控制中的应用

针对多变量、非线性的两轮机器人系统的行走平衡控制问题,提出一种基于Backstepping（反推）方法和PID的控制策略。该策略在Backstepping控制器中加入模糊自适应部分,利用模糊系统逼近Backstepping设计过程中的未知非线性函数,模糊系统中的参数基于自适应律调整,解决了Backstepping控制器中因含有未知参数难以实现的困难,避免了两轮机器人系统不满足严格三角结构的问题。针对两轮机器人的仿真实验结果表明：采用设计的控制策略,可以实现两轮机器人的行走平衡控制任务。     

Robust impedance control of robot manipulators using differential equations as universal approximator

This paper presents a robust impedance controller for robot manipulators using function approximation techniques (FATs). Recently, some FAT-based robust impedance control approaches have been presented using Fourier series expansion or Legendre polynomials for uncertainty estimation. However, the dimensions of regressor matrices in these approaches are relatively large. This problem becomes hypersensitive especially for higher degree of freedom robot manipulators. In this paper, a simpler and less computational FAT-based robust controller is presented without considering discontinuous nonlinearities. It is assumed that the lumped uncertainty can be modelled by a linear differential equation with unknown coefficients. Then, using the Stone–Weierstrass theorem, it is verified that these differential equations are universal approximators. The advantage of the proposed controller in comparison with previous related works is reducing the dimensions of regressor matrices. Simulation results on a Puma560 robot manipulator indicate the efficiency of the proposed method.     

漂浮基空间机器人的径向基神经网络鲁棒自适应控制

针对一类同时具有参数及非参数不确定性的自由漂浮空间机器人系统的轨迹跟踪问题,采用了一种RBF神经网络的自适应鲁棒补偿控制策略.对于系统的参数不确定性,通过对径向基神经网络来自适应学习并补偿,逼近误差通过滑模控制器消除,神经网络权重的自适应修正规则基于Lyapunov函数方法得到;而非参数不确定通过鲁棒控制器来实时自适应...     

神经网络自适应滑模控制的不确定机器人轨迹跟踪控制

提出一种针对机器人跟踪控制的神经网络自适应滑模控制策略。该控制方案将神经网络的非线性映射能力与滑模变结构和自适应控制相结合。对于机器人中不确定项,通过RBF网络分别进行自适应补偿,并通过滑模变结构控制器和自适应控制器消除逼近误差。同时基于Lyapunov理论保证机器手轨迹跟踪误差渐进收敛于零。仿真结果表明了该方法的优越性和有效性。     

Noncertainty equivalent adaptive control of robot manipulators without velocity measurements

This paper presents a noncertainty equivalent adaptive motion control scheme for robot manipulators in the absence of link velocity measurements. A new output feedback adaptation algorithm, based on the attractive manifold design approach, is developed. A proportional-integral adaptation is selected for the adaptive parameter estimator to strengthen the passivity of the system. In order to relieve velocity measurements, an observer is designed to estimate the velocities. The controller guarantees semiglobal asymptotic motion tracking and velocity estimation, as well as L_∞ and L₂ bounded parameter estimation error. The effectiveness of the proposed controller is verified by simulations for a two-link robot manipulator and a four-bar linkage. The results are further compared with the earlier certainty-equivalent adaptive partial and full state feedback controller to highlight potential closed-loop performance improvements.     

不确定性自由漂浮空间机器人神经自适应控制

针对具有模型不确定性以及外部干扰下的自由漂浮空间机器人,采用一种整体逼近的神经网络自适应控制方法。该方法采用RBF神经网络对不同重力环境下系统模型的不确定项进行整体逼近,对系统的不确定项进行在线自适应学习。神经网络的逼近误差以及外界干扰由鲁棒项进行消除。该方法不依赖于系统模型,简化了控制系统的结构,在考虑重力等不确定项的情况下不用改变控制器也能进行控制,并且根据李亚普诺夫理论证明了所设计控制器使系统渐进稳定。在不同重力环境下进行了仿真,验证了控制方案的有效性。