Performance and hot-carrier reliability of 100 nm channel lengthjet vapor deposited Si3N4 MNSFETs

Metal-nitride-semiconductor FETs (MNSFETs) having channel lengths down to 100 mm and a novel jet vapor deposited (JVD) Si₃N₄ gate dielectric have been fabricated and characterized. When compared with MOSFETs having a thermal SiO₂ gate insulator, the MNSFETs show a comparable drain current drive, transconductance, subthreshold slope and pre-stress interface quality. A novel charge pumping technique is employed to characterize the hot-carrier induced interface-trap generation in MNSFETs and MOSFETs. Under identical substrate current during stress, MNSFETs show less interface-state generation and drain current degradation, for various channel lengths, stress times and supply voltages, despite the fact that the Si-Si₃N₄ barrier (2.1 eV) is lower than the Si-SiO₂ barrier (3.1 eV). The time and voltage dependence of hot-carrier degradation has been found to be distinctly different for MNSFETs compared to SiO₂ MOSFETs     

Electrical Characteristics of Memory Devices With a High- k HfO2 Trapping Layer and Dual SiO2/Si3N4 Tunneling Layer

A novel device structure with a high-k HfO₂ charge storage layer and dual tunneling layer (DTL) (SiO₂/Si₃N₄) is presented in this paper. Combining advantages of the high trapping efficiency of high-k materials and enhanced charge injection from the substrate through the DTL, the device achieves a fast program/erase speed and a large memory window. The device demonstrates excellent retention due to its physically thick DTL and also improved endurance without any increase of programming V_th throughout the cyclic test as compared with SONOS Flash memory devices using an Si₃N₄ trapping layer.     

Excess currents induced by hot hole injection and FN electroninjection in thin SiO2 films

The behavior of excess currents induced by Fowler-Nordheim electron injection stress (FN electron injection) has been investigated for 6.0-nm oxides. Excess currents are induced by FN electron injection in 6.0-nm oxides together with positive charges being induced in it. To clarify the role of hole injection in FN electron injection, the behavior of excess currents induced by substrate hot hole injection has also been investigated in 6.0-nm oxides. The leakage behavior after hot hole injection is the same as FN electron injection. The excess currents induced both by the FN electron injection and by the substrate hot hole injection are due to trap-assisted tunneling and field enhancement at the cathode due to the positive trapped charge. The charge centroid of the positive charges induced by both stresses are located 3.0 nm from the Si/SiO₂ interface which is at the center of 6.0-nm oxide. The excess currents induced by hot hole injection and FN electron injection are caused by traps in SiO₂ films produced by injected holes from the anode     

Formation of high quality storage capacitor dielectrics by in-siturapid thermal reoxidation of Si3N4 films inN2O ambient

This letter reports on a novel reoxidation technique for SiO₂ /Si₃N₄ (ON) stacked films by using N₂ O as oxidant. Effect of in-situ rapid thermal N₂O reoxidation (RTNO) on the electrical characteristics of thin ON stacked films are studied and compared with those of in-situ rapid thermal. O ₂ reoxidation (RTO). Prior to reoxidation, the Si₃N₄ film was deposited by rapid thermal chemical vapor deposition (RT-CVD) using SiH₄ and NH₃. Results show that RTNO of the Si₃N₄ films significantly improves electrical characteristics of ON stacked films in terms of lower leakage current, suppressed charge trapping, reduced defect density and improved time-dependent-dielectric-breakdown (TDDB), as compared to RTO of the Si₃N₄ films     

Effects of post-deposition anneal on the electrical properties ofSi3N4 gate dielectric

The effects of postdeposition anneal of chemical vapor deposited silicon nitride are studied. The Si₃N₄ films were in situ annealed in either H₂(2%)/O₂ at 950°C or N₂O at 950°C in a rapid thermal oxidation system. It is found that an interfacial oxide was grown at the Si₃N₄/Si interface by both postdeposition anneal conditions. This was confirmed by thickness measurement and X-ray photoelectronic spectroscopy (XPS) analysis. The devices with H₂ (2%)/O₂ anneal exhibit a lower gate leakage current and improved reliability compared to that of N₂O anneal. This improvement is attributed to a greater efficiency of generating atomic oxygen in the presence of a small amount of hydrogen, leading to the elimination of structural defects in the as-deposited Si₃N ₄ film by the atomic oxygen. Good drivability is also demonstrated on a 0.12 μm n-MOSFET device     

Origin of positive charge generated in thin SiO2 filmsduring high-field electrical stress

The characteristics of electron capture in a 131-Å silicon dioxide after hot-hole injection have been studied, which have been compared with those after high-field Fowler-Nordheim (FN) electron injection. After hole injection from the silicon substrate into the oxide, positive charges accumulated in the oxide and electrons could be captured even at low oxide fields only under the positive gate polarity. The charge centroid of the captured electrons was near the substrate-SiO ₂ interface. The low-field electron capture can be explained based on the electron tunneling from the substrate into the positive charge and neutral trap centers created near the substrate-SiO₂ interface. In order to investigate the initial stage of the oxide degradation due to high-field FN stress, electrons were injected from the gate and the charge fluence was selected to be -1.0 C/cm². After the high-field stress, positive charges appeared in the oxide and electrons were captured only under the positive gate polarity by the positive charge and neutral trap centers, which were distributed near the interface. These facts are explained on the basis of the model describing that hole injection and trapping are the dominant causes for the generation of the positive charge centers during high-field FN stress     

Two silicon nitride technologies for post-SiO2 MOSFETgate dielectric

P-MOSFETs with 14 Å equivalent oxide thickness (EOT) were fabricated using both JVD Si₃N₄ and RTCVD Si₃ N₄/SiO_xN_y gate dielectric technologies. With gate length down to 80 nm, the two technologies produced very similar device performances, such as drive current and gate tunneling current. The low gate leakage current, good device characteristics and compatibility with conventional CMOS processing technology make both nitride gate dielectrics attractive candidates for post-SiO₂ scaling. The fact that two significantly different technologies produced identical results suggests that the process window should be quite large     

GaAs metal insulator field effect transistors with excellentintrinsic transconductance and stable drain currents using (NH4)2Sx chemical treatment

Metal insulator semiconductor field effect transistors (MISFETs) and MIS capacitors are fabricated using Al metal-gate and PECVD silicon nitride (Si₃N₄) gate-insulator on commercial GaAs epitaxial wafers after treating the channel regions with (NH₄)₂S_x. It is shown that the post metallization annealing (PMA) of these devices improves the transconductance and reduces the interface state density (D_it) considerably. This is attributed to the additional passivation effect of hydrogen diffusing to the interface from the Si ₃N₄ during the PMA. An intrinsic transconductance of 30.7 mS/mm which is 75% of the theoretical maximum limit of 40.5 mS/mm has been achieved using silicon nitride gate insulator thickness of 1100 Å. Stability of the drain currents in these devices is demonstrated to be excellent     

SiO2 degradation with charge injection polarity

We have investigated gate oxide degradation in metal-oxide-semiconductor (MOS) devices as a function of high-field constant-current stress for charge injection from both gate and substrate. The two polarities are asymmetric: gate injection, where the substrate Si-SiO₂ interface is the collecting electrode for the energetic electrons, shows a higher rate of interface-state generation (ΔD_it) and lower charge-to-breakdown Q_bd. Thus the collecting electrode interface, which suffers primary damage, emerges as a critical degradation site in addition to the injecting electrode interface, which has been the traditional focus. Consistent with a physical-damage model of breakdown, we demonstrate that interfacial degradation is an important precursor of breakdown, and that the nature of breakdown-related damage is physical, such as trap-generation by broken bonds     

The degradation of TDDB characteristics of Si02/Si3N4/Si02 stacked films caused by surfaceroughness of Si3N4 films [DRAMs]

The effect of surface roughness of Si₃N₄ films on time-dependent dielectric breakdown (TDDB) characteristics of SiO₂/Si₃N₄/SiO₂ (ONO) stacked films was investigated. The surface roughness of Si₃N ₄ films-was found to become higher with increasing deposition temperature and to cause the degradation of TDDB characteristics of ONO films in DRAMs. A local thinning of ONO films, evaluated from the TDDB characteristics, agreed with the surface roughness measured by atomic force microscopy (AFM) and cross-sectional transmission electron microscopy (XTEM). Dependence of time to breakdown of ONO films on the deposition conditions was interpreted by electric field intensification due to the surface roughness of Si₃N₄ films     

Highly reliable SiO2/Si3N4 stackeddielectric on rapid-thermal-nitrided rugged polysilicon for high-densityDRAM's

Experimental results are presented demonstrating that by using rapid thermal nitridation (RTN) of rugged poly-Si surface prior to Si ₃N₄ deposition, the quality and reliability of reoxidized Si₃N₄ dielectric (ON dielectric with an effective oxide thickness of about 35 Å) can be significantly improved over ON films on rugged poly-Si without RTN treatment. These improvements include significantly reduced defect-related dielectric breakdown, 10³ × increase in TDDB lifetime, lower leakage current, and suppressed electron-hole trapping and capacitance loss during stress     

Electrical properties of MOSFET's with N2O-nitridedLPCVD SiO2 gate dielectrics

Electrical properties of MOSFETs with gate dielectrics of low-pressure chemical-vapor-deposited (LPCVD) SiO₂ nitrided in N₂O ambient are compared to those with control thermal gate oxide. N₂O nitridation of CVD oxide, combines the advantages of interfacial oxynitride growth and the defectless nature of CVD oxide. As a result, devices with N₂O-nitrided CVD oxide show considerably enhanced performance (higher effective electron mobility), improved reliability (reduced charge trapping, interface state generation, and transconductance degradation), and better time-dependent dielectric breakdown (TDDB) properties (t_BD ) compared to devices with control thermal oxide     

Effects of surface pretreatment of polysilicon electrode prior toSi3N4 deposition on the electrical characteristicsof Si3N4 dielectric films

Effects of various surface pretreatments of polysilicon electrode prior to Si₃N₄ deposition on leakage current, time-dependent dielectric breakdown (TDDB) and charge trapping characteristics of thin Si₃N₄ films deposited on rugged and smooth poly-Si are investigated. Surface pretreatments consist of different combinations of HF clean, rapid thermal H₂ -Ar clean, and rapid thermal NH₃-nitridation (RTN) and are intended to modify the surface of bottom poly-Si electrode. Results show that RTN treatments lead to lower leakage current, reduced charge trapping, and superior TDDB characteristics as compared to rapid thermal H₂-Ar clean     

Enhanced H2-plasma effects on polysilicon thin-filmtransistors with thin ONO gate-dielectrics

This letter reports that passivation effects of the H₂-plasma on the polysilicon thin-film transistors (TFT's) were greatly enhanced if the TFT's have a thin Si₃N₄ film on their gate-dielectrics. Compared to the conventional devices with only the SiO₂ gate dielectric, the TFT's with Si ₃N₄ have much more improvement on their subthreshold swing and field-effect mobility after H₂-plasma treatment     

Partial Crystallization of HfO2 for Two-Bit/Four-Level SONOS-Type Flash Memory

The nonvolatile memory properties of the partially crystallized HfO₂ charge storage layer are investigated using short-channel devices of gate length L_g down to 80 nm. Highly efficient two-bit and four-level device operation is demonstrated by channel hot electron injection programming and hot hole injection erasing for devices of L_g > 170 nm, although the reduction of the memory window is observed for devices of L_g < 170 nm. A memory window of 5.5 V, ten-year retention of V_th clearance larger than 1.5 V between adjacent levels, endurance for 10⁵ programming/erasing cycles, and immunity to programming disturbances are demonstrated. Flash memory with partially crystallized HfO₂ shows a larger memory window than HfO₂ nanodot memory, assisted by the enhanced electron capture efficiency of an amorphous HfO₂ matrix, which is lacking in other types of reported nanodot memory. The scalability, programming speed, V_th control for two-bit and four-level operation, endurance, and retention are also improved, compared with NROM devices that use a Si₃N₄ trapping layer.     

A physical model for hole direct tunneling current in p+poly-gate pMOSFETs with ultrathin gate oxides

A model of the hole direct tunneling gate current accounting for heavy and light hole's subbands in the quantized inversion layer is built explicitly. This model comprises four key physical parameters: inversion layer charge density, hole impact frequency on SiO₂-Si interface, WKB transmission probability, and reflection correction factor. With the effective hole mass m_oxh =0.51 M_o for the parabolic dispersion relationship in the oxide, experimental reproduction without any parameter adjustment is consistently achieved in p⁺ poly-gate pMOSFETs with 1.23, 1.85, and 2.16 nm gate oxide thicknesses. The proposed model can thereby serve as a promising characterization means of direct tunnel oxides. In particular, it is calculated that the secondary subbands and beyond, although occupying few holes, indeed contribute substantially to the direct tunneling conduction due to effective lower barrier heights, and are prevailing over the first subbands for reducing the oxide field down below 1 MV/cm     

The performance and reliability of PMOSFET's with ultrathin siliconnitride/oxide stacked gate dielectrics with nitrided Si-SiO2interfaces prepared by remote plasma enhanced CVD and post-depositionrapid thermal annealing

Ultrathin (~1.9 nm) nitride/oxide (N/O) dual layer gate dielectrics have been prepared by the remote plasma enhanced chemical vapor deposition (RPECVD) of Si₃N₄ onto oxides. Compared to PMOSFET's with heavily doped p⁺-poly-Si gates and oxide dielectrics, devices incorporating the RPECVD stacked nitrides display reduced tunneling current, effectively no boron penetration and improved interface characteristics. By preventing boron penetration into the bulk oxide and channel region, gate dielectric reliability and short channel effects are significantly improved. The hole mobility in devices with N/O dielectrics with equivalent oxide thickness between 1.8 nm and 3.0 nm is not significantly degraded. Because nitrogen is transported to the substrate/dielectric interface during post-deposition annealing, degradation of mobility during hot carrier stressing is significantly reduced for N/O devices. Compared with oxide, the tunneling current for N/O films with ~1.9 nm equivalent oxide thickness is lower by about an order of magnitude due to the larger physical thickness. Suppression of boron transport in nitride layers is explained by a percolation model in which boron transport is blocked in sufficiently thick nitrides, and is proportional to the oxide fraction in oxynitride alloys     

MOS characteristics of ultrathin SiO2 prepared byoxidizing Si in N2O

MOS characteristics of ultrathin gate oxides prepared by furnace oxidizing Si in N₂O have been studied. Compared to control oxides grown in O₂, N₂O oxides exhibit significantly improved resistance to charge trapping and interface state generation under hot-carrier stressing. In addition, both charge to breakdown and time to breakdown are improved considerably. MOSFETs with N₂O gate dielectrics exhibit enhanced current drivability and improved resistance to g_m degradation during channel hot-electron stressing     

Time-dependent dielectric breakdown characteristics ofN2O oxide under dynamic stressing

Time-dependent dielectric breakdown (TDDB) characteristics of MOS capacitors with thin (120-Å) N₂O gate oxide under dynamic unipolar and bipolar stress have been studied and compared to those with control thermal gate oxide of identical thickness. Results show that N₂O oxide has significant improvement in t _BD (2×under-V_g unipolar stress, 20×under+V_g unipolar stress, and 10×under bipolar stress). The improvement of t_BD in N₂O oxide is attributed to the suppressed electron trapping and enhanced hole detrapping due to the nitrogen incorporation at the SiO₂/Si interface     

Enhanced injection in n++-poly/SiOx/SiO2/p-sub MOS capacitors for low-voltage nonvolatile memoryapplications: experiment

In this paper, n⁺⁺-poly/SiO_x/SiO₂/p-sub capacitors with enhanced electron injection under substrate accumulation are extensively studied. First, systematic investigation of the role of technology parameters in the PECVD deposition of the SiO_x films is presented. In particular, the effect of the silane dilution parameter on the device performance is investigated and the SiO_x film optimized in terms of reliability and electron injection enhancement. Then, investigation of the electrical behavior of n⁺⁺ -poly/SiO_x/SiO₂/p-sub MOS capacitors is presented. As a result, a picture of the space defect distribution in the SiO_x films is proposed. In SiO_x films, a relevant density of trapped charge adds to ionized impurities. In particular, the net charge is negative in the bulk of the dielectric, indicating that trapped electrons exceed all the other charge contributions. The space distribution of defects is strongly nonuniform and has the maximum in the vicinity of the SiO_x/SiO₂ interface. After dc current stress, the devices undergo electrical degradation, the dominant mechanism of degradation being the creation of interface hole traps. The trap generation model is based on the release of hydrogen and pairs generation in the SiO_x films. The time-scale of trap filling during the stress is tens of seconds, which suggests that the stress-induced traps are deep in the energy gap