HDPE/sPS增容共混复合材料的研究

用2种分子量不同的苯乙烯-(乙烯/丁烯)-苯乙烯三嵌段共聚物(SEBS)和一种苯乙烯-b-乙烯/丁烯((SEB)两嵌段共聚物为增容剂,对高密度聚乙烯(HDPE)/间规聚苯乙烯(sPS),共混物进行增容.采用扫描电镜(SEM)及拉伸试验研究了增容剂的分子量及结构对共混物形态结构及力学性能的影响.结果表明:3种增容剂SEBS (SEB)均可有效地降低sPS分散相的尺寸并增加HDPE/sPS共混物的界面强度,从而提高其力学性能.sPS的掺入可以显著提高HDPE的耐热性能.     

SEBS分子量和分子结构对其共混物性能的影响

研究了苯乙烯-乙烯/丁烯-苯乙烯嵌段共聚物(SEBS)分子量和分子结构对其共混物的力学性能、永久压缩变形和流变性能的影响。结果表明:高分子量的线型SEBS拥有更优的力学性能,更低的高温永久压缩变形;当SEBS的分子量大于临界分子量(7×104~10×104 g/mol之间)时,其室温永久压缩变形不受分子量和分子结构的影响;星型SEBS较线型含有更多的二嵌段苯乙烯-乙烯/丁烯(SEB),其分子量越高,二嵌段SEB含量越高;SEBS的分子量越大,苯乙烯含量越高,共混物的熔体黏度就越大,表观剪切黏度对剪切速率的敏感性越强。     

混合增容剂对HDPE/sPS共混物形态及性能的影响

分别采用2种组成相近而分子量不同的苯乙烯-乙烯/丁烯-苯乙烯共聚物(SEBS)以及两者的混合物对高密度聚乙烯/间规聚苯乙烯(HDPE/s PS)共混物进行增容改性。通过扫描电镜(SEM)及拉伸实验试验考查了增容剂的分子量及含量对HDPE/s PS共混物形态结构及力学性能的影响。结果表明:两种增容剂都能降低s PS分散相尺寸,使两相界面的粘合力增强。相对较低分子量的SEBS(K1652)能显著提高两相界面粘结性,进而能有效提高共混物的拉伸强度,而较高分子量的SEBS(K1651)能显著改善共混物的韧性。一定比例混合的共聚物作为增容剂在改善共混物性能方面具有协同效应,可以同时提高共混物拉伸强和断裂伸长率,混合增容剂效果优于单一增容剂。HDPE/s PS共混物中加入质量分数4%的K1652和2%的K1651,共混物的综合力学性能最优。     

PP/HDPE/弹性体三元共混改性的研究

用双螺杆挤出机制备了聚丙烯(PP)/高密度聚乙烯(HDPE)/弹性体三元共混物,分别探讨了3种弹性体乙烯-辛烯嵌段共聚物(OBC)、苯乙烯-丁二烯-苯乙烯嵌段共聚物(SBS)、苯乙烯-乙烯/丁烯-苯乙烯嵌段共聚物(SEBS)的含量对PP三元共混物力学性能的影响,并通过扫描电子显微镜观察其脆断表面形态。结果表明,OBC、SBS、SEBS和HDPE都对PP起到了一定的协同增韧作用,SEBS对PP的增韧效果最佳;SEM表明三元共混力学性能与相形态密切相关;所制备的PP/HDPE/OBC三元共混物的加工性能较好。     

顺酐化聚苯乙烯对PVC/SEBS共混物的增容作用

以顺酐化聚苯乙烯(PS-g-MAH)为增容剂,研究了苯乙烯-乙烯-丁烯-苯乙烯嵌段共聚物(SEBS)对聚氯乙烯(PVC)的共混增韧改性,讨论了该共混物在常温、低温下的力学性能及动态力学性能。结果表明,PS-g-MAH能明显改善SEBS与PVC的相容性,使PVC/SEBS共混物中分散相颗粒尺寸明显减小,分布更均匀,共混物的玻璃化转变温度内移,常温和低温下缺口冲击强度增大。当PVC/PS-g-MAH/SEBS(质量比)为75/6/25时,共混物的常温缺口冲击强度为50.6 kJ/m2,低温(-20℃)缺口冲击强度为29.8 kJ/m2。     

关于PS/PP系共混物的研究——第1报 PS/PP共混体系的相容性和相态结构

本研究以苯乙烯—乙烯—丁烯—苯乙烯嵌段共聚物(SEBS)和苯乙烯—乙烯—丙烯嵌段共聚物(SEP)为界面活性剂(相溶化剂),研究聚苯乙烯等规聚丙烯(PS/PP)共混体系的相容性;研究PS/PP两成分体系和添加界面活性剂后三成分体系的相态结构及相界面形态。为制取结构稳定的PS/PP系共混物,进一步制取具有特殊性能约PS/PP共混纤维提供实用的工艺条件和理论依据。     

POE-g-MAH改性SEBS/OBC共混物的相容性、结构和力学性能研究

采用相容剂马来酸酐接枝乙烯-辛烯无规共聚物(POE-g-MAH)改性氢化苯乙烯-丁二烯-苯乙烯嵌段共聚物/乙烯-辛烯嵌段共聚物(SEBS/OBC)共混物,研究共混物的流动性、结晶行为、微观结构及力学性能。结果表明:POE-g-MAH和OBC的加入改善SEBS流动性。当OBC的含量为40%,SEBS/OBC/POE-g-MAH的熔体流动速率(MFR)为4.43 g/10min。POE-g-MAH提高了SEBS/OBC共混物的结晶温度,改善OBC和SEBS之间的相容性。POE-g-MAH提高了SEBS与OBC之间的界面结合能力,从而提高SEBS/OBC的拉伸强度。当OBC含量为10%时,SEBS的拉伸强度和断裂伸长率提升较少,SEBS的结构对性能影响占主导。当OBC含量进一步增加时,SEBS和OBC的共同作用,明显改善共混物的拉伸强度和断裂伸长率。     

SEBS增韧PVDF的研究

采用不同结构热塑性弹性体苯乙烯-乙烯-丁烯-苯乙烯(SEBS)作为增韧剂添加到聚偏氟乙烯(PVDF)中以提高韧性;并探索两种相容剂聚丙烯接枝马来酸酐(PP-g-MAH)和苯乙烯-(乙烯-丁烯)-苯乙烯嵌段共聚物接枝马来酸酐(SEBS-g-MAH)对PVDF/SEBS共混体系物理机械性能的影响。结果表明,线型结构的SEBS有利于提高PVDF的拉伸韧性,相容剂SEBS-g-MAH有助于进一步提高拉伸韧性,其用量在1%时共混体系的断裂伸长率达到最大值。     

PA66/SEBS复合材料的制备与性能研究

以聚酰胺66(PA66)和苯乙烯-乙烯-丁二烯-苯乙烯嵌段共聚物(SEBS)为原料,3份马来酸酐接枝苯乙烯-乙烯-丁二烯-苯乙烯共聚物(SEBS-g-MAH)为增容剂,通过熔融共混法制备了PA66/SEBS复合材料,研究了SEBS添加量对复合材料结晶性能、热性能、界面相容性、力学性能等的影响。结果表明:SEBS的加入没有改变PA66的特有晶型,仅仅改变了不同晶型的相对含量;随着SEBS用量的增加,PA66/SEBS复合材料的熔融温度、界面相容性下降,拉伸强度也呈逐渐降低的趋势;随着SEBS用量的增加,未加增容剂的复合材料的断裂伸长率呈逐渐减小的趋势,而加入增容剂的复合材料的断裂伸长率则呈先增后减的趋势;另外,加入了增容剂的复合材料的力学性能明显优于未加增容剂的复合材料。     

弹性非织造布用SEBS/PP共混料的制备及其可纺性研究

以低相对分子质量苯乙烯-乙烯-丁烯-苯乙烯嵌段共聚物(SEBS)和聚丙烯(PP)为原料,制得SEBS/PP共混料,然后通过熔融纺丝制备弹性非织造布用SEBS/PP纤维,研究了SEBS/PP共混体系的流变性能、热学性能和力学性能,并对其可纺性进行了探索.结果表明:在低相对分子质量SEBS中添加高熔体流动指数PP后,可在保...     

Compatibilization effects of block copolymers in high density polyethylene/syndiotactic polystyrene blends

Three triblock copolymers of poly[styrene-b-(ethylene-co-butylene)-b-styrene] (SEBS) of different molecular weights and one diblock copolymer of poly[styrene-b-(ethylene-co-butylene)] (SEB) were used to compatibilize high density polyethylene/syndiotactic polystyrene (HDPE/sPS, 80/20) blend. Morphology observation showed that phase size of the dispersed sPS particles was significantly reduced on addition of all the four copolymers and the interfacial adhesion between the two phases was dramatically enhanced. Tensile strength of the blends increased at lower copolymer content but decreased with increasing copolymer content. The elongation at break of the blends improved and sharply increased with increments of the copolymers. Drop in modulus of the blend was observed on addition of the rubbery copolymers. The mechanical performance of the modified blends is strikingly dependent not only on the interfacial activity of the copolymers but also on the mechanical properties of the copolymers, particularly at the high copolymer concentration. Addition of compatibilizers to HDPE/sPS blend resulted in a significant reduction in crystallinity of both HDPE and sPS. Measurements of Vicat softening temperature of the HDPE/sPS blends show that heat resistance of HDPE is greatly improved upon incorporation of 20 wt% sPS.     

高密度聚乙烯／尼龙1010共混体系的研究

采用接枝共聚方法,合成了高密度聚乙烯与马来酸酐,甲基丙烯酸和丙烯酸丁酯的接枝共聚物增容剂,研究了增容剂中接枝单体的种类及含量和增容剂用量等因素对高密度聚乙烯／尼龙1010共混体系力学性能的影响,结果表明在不同类型的接枝共聚物中以聚乙烯马来酸酐接枝共聚物对HDPE／PA1010共混体系的增容效果最好,在接枝单体含量和增容剂用量分别为4％－6％和5％左右时,共混体系的力学性能最好。     

VC／BA共混物增容PVC／HDPE共混体系的研究

采用氯乙烯—丙烯酸丁酯(VC/BA)共混物作为聚氯乙烯(PVC)/高密度聚乙烯(HDPE)共混物的增容剂,通过冲击实验、拉仲实验、动态力学分析,系统地研究了共混体系性能与其结构之间的关系。通过Brabender流变仪测定了VC/BA共混物增容PVC/HDPE共混体系的流变性能。结果表明,VC/BA共混物是PVC/HDPE共混体系的良好增容剂。在一定范围内,VC/BA共混物与HDPE对PVC有协同增韧效应。vC/BA和HDPE的加入改善了PVC的塑化和流变性能     

Study of compatibilization of HDPE–PET blends by adding grafted or statistical copolymers

The reactive compatibilization of blends of HDPE–PET [high‐density polyethylene–poly(ethylene terephthalate)] was investigated in this study. The compatibilizers used were two grafted copolymers prepared by reactive extrusion containing 1.20–2.30 wt % GMA such as HDPE‐g‐GMA and one statistical copolymer containing 1 wt % GMA such as Lotader AX8920. HDPE was successfully functionalized using a melt free‐radical grafting technique. Grafting was initiated in two ways: adding an initiator in the polymer–monomer mixture or activation by ozone of polymer. Ozonization of HDPE by the introduction of a peroxide lead to a better grafting yield and to better grafting efficiency of the samples. The effects of the three compatibilizers were evaluated by studying the morphology and the thermal and mechanical properties of HDPE–PET (70/30 wt %) blends. Significant improvements were observed, especially in morphology, elongation at break, and Charpy impact strength of the compatibilized blends. A more pronounced compatibilizing effect was obtained with the statistical copolymer, for which the elongation at break and the impact strength were increased by 100%, while the uncompatibilized blends showed a 60% decrease in the Young's modulus and the strength at break. We also were able to show that the grafting yield increase of 1.20–2.30 wt % of GMA did not affect the properties of the blends because the grafted copolymers possess very similar chemical structures. However, compatibilization of blends with grafted copolymers is an interesting method, particularly for recycled blends, because the synthesis of these compatibilizers is easy and cheap in comparison to statistical copolymer. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 2377–2386, 2001     

Effect of ethylene-propylene copolymer with residual PE crystallinity on mechanical properties and morphology of PP/HDPE blends

Morphology and mechanical properties of polypropylene (PP)/high density polyethylene (HDPE) blends modified by ethylene-propylene copolymers (EPC) with residual PE crystallinity were investigated. The EPC showed different interfacial behavior in PP/HDPE blends of different compositions. A 25/75 blend of PP/HDPE (weight ratio) showed improved tensile strength and elongation at break at low EPC content (5 wt %). For the PP/HDPE = 50/50 blend, the presence of the EPC component tended to make the PP dispresed phase structure transform into a cocontinuous one, probably caused by improved viscosity matching of the two components. Both tensile strength and elongation at break were improved at EPC content of 5 wt %. For PP/HDPE 75/25 blends, the much smaller dispersed HDPE phase and significantly improved elongation at break resulted from compatibilization by EPC copolymers. © 1995 John Wiley & Sons, Inc.     

Compatibilization of polyethylene/poly(propylene)/polystyrene blends

The compatibilization of mixtures of polyolefins or of polyolefins with polystyrene using either liquid polybutadiene (l-PB)/organic peroxide or styrene-butadiene-styrene (SBS) block copolymers was investigated. Tensile impact strength was chosen as a measure of compatibility. Binary blends LDPE/high-impact polystyrene (HIPS) and LDPE/poly(propylene) (PP) as well as LDPE/HDPE/PP/HIPS blends were prepared by blending in the chamber of a Brabender Plasticorder. Composition of the blends corresponds to real commingled plastic waste. It was found that l-PB-based compatibilizer enhanced the impact strength of LDPE/HIPS blends with LDPE contents higher than 60 wt.-% only. Also SBS copolymer enhanced the impact strength of LDPE/PP blends with LDPE contents higher than 40 wt.-%. Both the compatibilizers substantially increased the toughness of LDPE/HDPE/PP/HIPS blends with composition similar to the municipal plastic waste.     

Effect of the addition of ethylene-propylene random copolymers on the properties of high-density polyethylene/isotactic polypropylene blends: Part 1—morphology and impact behavior of molded samples

Two random commercial ethylene-propylene copolymers (EPM) with different ethylene content have been added to binary isotactic polypropylene (iPP)/high density polyethylene (HDPE) blends by melt mixing in a Brabender-like apparatus. Impact Izod tests and a morphological analysis on the fractured surfaces of broken specimens have been performed and discussed, in order to improve the deficiency in toughness of the binary HDPE/iPP mixtures. The results show that the impact performance of both homopolymers and HDPE/iPP binary blends is strongly improved by the addition of the EPM copolymers. Such an effect is related to the fact that the overall morphology, as well as the mechanism and mode of fracture, are greatly modified by the presence of such additives. The extent is dependent on factors such as the nature of the matrix (HDPE or iPP), the composition, and the chemical structure and/or the molecular mass of the added copolymer.     

Effect of the addition of EPM copolymers on the properties of high density polyethylene/isotactic polypropylene blends: II. Morphology and mechanical properties of extruded samples

The influence of the addition of two ethylene-propylene random copolymers (EPM) with different composition on the mechanical properties, thermal behavior and overall morphology of high density polyethylene (HDPE)/isotactic polypropylene (iPP) blends, was investigated on extruded samples. The experimental data showed that the morphology of binary HDPE/iPP blends is drastically modified by these additives and that the ultimate mechanical properties of these mixtures are greatly improved. A reasonable explanation of these results can be ascribed to the fact that these copolymers can act as “compatibilizing agents” in the amorphous regions of the two semicrystalline homopolymers. The extent of such effects is dependent on the chemical structure and/or on the molecular mass of the added copolymer as well as on the HDPE/iPP blend compositions.     

E-TMB中弹性体含量对HDPE/E-TMB共混物性能的影响

以高密度聚乙烯(HDPE)为基体树脂,(乙烯/丙烯)共聚物和(苯乙烯/丁二烯)共聚物为增韧剂研制出5种弹性体含量不同的聚乙烯增韧母料(E-TMB),将E-TMB与HDPE热机械共混制得弹性体总含量均为6.3%的5种HDPE/E-TMB共混物,研究了E-TMB中弹性体含量对共混物力学性能和热性能的影响。结果表明,当E-TMB中弹性体含量为44%时,共混物的综合力学性能最好,悬臂梁缺口冲击强度是HDPE的5.65倍,拉伸屈服强度和弯曲弹性模量保留率分别为90.8%和73.7%;共混物的熔点和热分解温度随E-TMB中弹性体含量的增加而升高,结晶温度随E-TMB中弹性体含量的增加而降低。