Evaluation of the usefulness of serial combination processes for drying of apples

Abstract

Serial combination drying processes are currently studied as alternatives to conventional drying processes. Compared to freeze-drying (FD), serial combination drying appears to be faster and less expensive, while providing better product quality than hot-air drying (HAD) and microwave-vacuum drying (MVD) as previously demonstrated for carrots. Using the example of carrots, it has also been shown that the drying front moves radially outwards over the course of FD. This unexpected behavior was suggested to originate from the carrots’ heterogeneous structure. It was hypothesized that apple pieces behave differently. Here, this hypothesis was proven by using micro-computed tomography measurements of partly freeze-dried apple pieces. In order to improve the drying process of apple pieces, several single and combination drying processes were carried out. Processes were evaluated by using drying time and sample quality as relevant parameters. Sample quality was determined by analyzing the 3D-structure, rehydration behavior, color, and ingredient retention. Results showed that single MVD is a well suitable drying technique for apple pieces, producing dried products of equal quality to FD. Different from carrots, serial combinations are not necessary to improve the quality of dried apple pieces. Nonetheless, especially a combination of HAD and MVD was useful to obtain specific structures such as puffed pores that did not result from single MVD.     

A comparative study of drying methods on physical characteristics,nutritional properties and antioxidant capacity of broccoli

Abstract

Broccoli is considered one of the attractive raw materials for dehydrated vegetables owing to its high nutritional value. However, information about how drying methods affect the physicochemical and nutritional properties of broccoli is limited. In this study, broccoli pieces were subjected to freeze drying (FD), hot air drying (HAD), microwave vacuum drying (MVD), vacuum drying (VD), MVD combined with HAD (MVD?+?HAD), and MVD combined with VD (MVD?+?VD). Quality attributes of dehydrated broccolis were contrasted in terms of color, texture, volume shrinkage, nutritional components, antioxidant activity, and rehydration capacity. Results demonstrated that FD better preserved the nutrients while HAD displayed the worst effect. The combination of MVD?+?HAD and MVD?+?VD resulted in higher retention of nutritional compositions, better antioxidant activity, and lower energy consumption than that of HAD. Furthermore, combined drying processing exhibited similar rehydration capacity but lower hardness compared to that of HAD.     

How to Meet the Freeze Drying Standard in Combined Drying Processes: Pre and Finish Drying of Carrot Dice

Freeze-drying (FD) processes are well known to produce high-quality consumer products. Major problems are long drying times, high investment costs, and resulting maintenance and operating costs that make FD a very costly process. In this study, the potential of air drying (AD) and microwave vacuum drying (MVD) is tested to reduce freeze-drying times and make better utilization of the investment by combining FD with alternative lower cost drying processes using a pre or finish drying step while preserving the qualwity of the final product. Using carrot dice as a sample product, predrying did not lead to the desired qualities and reduction in drying time, whereas finish drying produced promising results. FD/MVD was 40% faster than pure FD and achieved freeze-drying standards regarding volume retention, shape, color, and rehydration. The good performance of microwave vacuum finish drying can directly be traced back to a time effect that is possibly linked to a characteristic collapse time of the cellular matrix. In order to use this effect, a stable skeleton must have developed at the point of process changeover, changeover has to be immediate, and finish drying has to be quick.     

Rehydration and Sensory Properties of Dehydrated Russet Potatoes (Solanum tuberosum) Using Microwave Vacuum,Heated Air,or Freeze Dehydration

Russet potatoes (Solanum tuberosum) dehydrated by microwave-vacuum (MVD), heated air (HAD), and freeze drying (FD) were compared by measuring color, texture, rehydration properties, and sensory properties. Scanning Electron Microscope (SEM) images were taken to observe cell damage in the dried potatoes. The MVD potatoes remained intact following rehydration and retained suitable textural and color properties based upon sensory evaluation. The FD potatoes became friable and lost color. Sensory panelists preferred MVD, FD, and HAD in that order. MVD can provide consumers with a dehydrated product that has characteristics similar to or better than those dried by HAD or FD.     

Study and comparison of different drying processes for dehydration of raspberries

The aim of the present study was to evaluate and compare different drying methods (microwave, hot air?+?microwave, and osmotic dehydration?+?microwave) in raspberries (cv. Heritage). A portion of raspberries was pretreated with osmotic dehydration (60°Brix sucrose solution at 20°C for 360?min) and another with hot air drying (HAD) (1.5?m/s air speed at 60°C for 300?min). Pretreated raspberries were then dried by microwave and at three different intensities (3.5, 7.5, and 11?W/g). Physicochemical properties (moisture content, water activity, and drying rate) and quality parameters (optical properties, mechanical properties, antioxidant capacity, and rehydration capacity) of dried raspberries were evaluated. Results showed that the microwave drying (MWD) at 7.5?W/g (50?min and final temperature of 79?±?5.1°C) allowed a high yield of dried raspberries. The combined processes were not efficient to accelerate the decrease of moisture content, due to the low drying rate of the pretreatments. In terms of quality, none of the drying processes allowed a high retention of the antioxidant capacity. However, they allowed an appropriate rehydration performance. The combination of HAD with MWD allowed obtaining a good appearance and desirable texture on the dried product. Thus, this last option seems to be the best among the drying methods tested, but additional studies are required to improve the efficiency of the process and the effect on the antioxidant capacity during drying.     

Comparison of two alternatives of combined drying to process blueberries (O'Neal): Evaluation of the final quality

In this work, we examined and compared two combined alternatives for the drying of blueberries (O’Neal). Pretreatments of osmotic dehydration (60°Brix sucrose solution at 40°C for 6 h) and hot air drying (HAD) (60°C, 2.5 m/s for 90 min) were performed to reach the same water content. Pretreated blueberries were then dried by microwave at different microwave output power values: 562.5, 622.5, and 750 W. The combined drying processes were also compared with HAD alone (control). The effects of the processes over blueberries were studied in terms of decrease in water content, drying rate (DR), mechanical properties (firmness and stiffness), optical properties (L*, a*, and hue angle (h)), antioxidant capacity, and rehydration capacity. The hot air–microwave drying decreased the process time and presented a high drying rate compared with the osmotic dehydration–microwave processes and the control drying. In terms of quality, the antioxidant and rehydration capacities were the most affected. The results showed that the best drying method to obtain the desired final product was the hot air–microwave drying (750 W).     

微波干燥和热风干燥对金萱茶叶品质影响

将微波干燥和热风干燥应用于新鲜金萱茶叶的干燥,在3个不同的微波功率（350 W,470 W,800 W）和4个不同的空气温度（70 ℃,80 ℃,90 ℃,100 ℃）下,研究了干燥参数即微波功率或温度对干燥时间、失水量的影响,同时还考察了茶叶中茶多酚总量和儿茶素含量的变化、干茶叶的复水性。实验得出,与热风干燥相比,微波干燥的时间缩短了76%～95%,而且干燥后的茶叶有很好的复水性,但干燥后茶多酚总量少于热风干燥;同时随着功率增加,微波干燥时间由11 min降为6 min,随着温度升高,热风干燥时间由127 min缩短为45 min。这两种方法的茶叶干燥动力学模型均满足Page’s半经验公式。     

Effect of infrared pretreatment on low-humidity air drying of apple slices

The dried apple is used in the preparation of weaning foods and bakery products. The current drying processes, especially hot air (HA) drying, still face the problem of longer processing time and product quality degradation. The low-humidity air (LHA) drying can be an option to retain product quality in heat-sensitive food such as apple. The present work focuses on the effect of pretreatment of apple slices with potassium metabisulfite and infrared (IR) waves on drying characteristics when subjected to LHA drying and comparing the product quality with conventional hot air and freeze drying (FD). Pretreatment with IR waves reduced the drying time by nearly 23 and 17% in LHA and HA drying, respectively. The results indicated that IR-treated and LHA-dried slices retained nearly 82–90 and 72–74% of ascorbic acid and total phenolic content, respectively and was comparable to FD slices. The drying time for LHA was nearly 37% lesser than that for HA drying. LHA-dried apple slices had better color and rehydration ratio compared to FD- and HA-dried slices.     

Drying of shiitake mushroom by combining freeze-drying and mid-infrared radiation

Mid-infrared drying (MIRD) was applied before or after freeze-drying (FD) of shiitake mushroom to shorten the drying time, to enhance the rehydration, and to better preserve the aroma compounds and color. The effect of application of MIRD before freeze drying (MIRD–FD) and after freeze drying (FD–MIRD) on drying time, color, rehydration ratio, apparent density, microstructure and aroma compounds was measured, explained and compared with the effect of FD on these parameters. The results showed that the combination of FD (for 4 h) followed by MIRD saves 48% time compared to FD while keeping the product quality at an acceptable level. The MIRD–FD combination was found to be inferior compared to the FD–MIRD as the former tended to produce products with a collapsed surface layer and poor rehydration capability. The combination of MIRD with FD had a significant effect on aroma retention and caused an increase of sulfur compounds such as dimethyl, trisulfide and 1,2,4-trithiolane.     

Drying kinetics and product quality of green soybean under different microwave drying methods

The objective of this study was to investigate the effect of different microwave drying techniques on the drying kinetics and product quality of dried green soybean. Experiments were conducted using microwave vacuum drying (MVD), pulse-spouted vacuum microwave drying (PSMVD), pulse-spouted microwave drying (PSMD), and microwave freeze drying (MFD). Parameters of apparent density, color, processing temperature, expansion ratio, rehydration ratio, texture, and microstructure of the dried products were determined. The results showed that the MFD green soybean had a small change on bright color, compared with the fresh samples, but the drying time was the longest among the four methods. The bright color value of PSMVD/PSMD/MVD, respectively, was 79.77, 71.43, and 55.45, and drying time of them was slightly different. The PSMVD/PSMD showed advantages over MVD by improving the product quality.     

Microwave vacuum drying of lotus seeds: Effect of a single-stage tempering treatment on drying characteristics,moisture distribution,and product quality

This study evaluated the effects of a single-stage tempering treatment during microwave vacuum drying (MVD) on drying characteristics and quality of lotus (Nelumbo nucifera Gaertn.) seeds using two parameters: intermediate moisture content (IMC) and tempering temperature (4 and 25°C). Magnetic resonance imaging (MRI) was used to examine moisture migration and distribution in individual lotus seed during tempering. Results from MRI showed tempering could reduce the moisture gradient in lotus seeds during MVD. The tempering treatments led to increased moisture diffusivity (3.96–43.56%) and a shortened drying time (6.25–31.25%) when compared with continuous MVD. Furthermore, tempered samples exhibited a greater rehydration capacity, a limited overall color change, and increased amounts of taste-active amino acids when compared with nontempered lotus seeds. High IMC improved rehydration ratios of dried samples. Low tempering temperature provided favorable free amino acid content and desirable product color.     

Comparison of Drying Characteristics and Quality of Shiitake Mushrooms (Lentinus edodes) Using Different Drying Methods

The objective of this study was to compare the drying characteristics and the quality of dried Shiitake mushroom (Lentinus edodes) cubes obtained by hot-air drying (HAD), intermediate-infrared drying (IIRD), and vacuum microwave spouted-bed drying (VMSD). Several quality parameters of products, including color, texture, and rehydration capacity, were investigated. Compared to IIRD and VMSD, HAD turn out to be the most undesirable method due to its longer drying time and poor product quality. With similar rehydration capacity, the color of the VMSD product was closest to the original material. In terms of texture, total sugar content, and sensory evaluation, the VMSD product has the best quality.     

Effects of different drying methods on the physical characteristics and flavor of dried hawthorns (Crataegus spp.)

ABSTRACT

The objective of this study was to compare the physical characteristics and flavor of dried hawthorns obtained by freeze-drying (FD), microwave freeze-drying (MFD), atmospheric freeze-drying (AFD), and heat pump drying (HPD). The parameters including moisture content, product temperature, rehydration ratio, chroma, hue angle, yellowness index, total color difference, and energy consumption were investigated. The use of fuzzy reasoning for the sensory evaluation of hawthorn quality was also performed. As expected, AFD, FD, and MFD produced better accepted dried hawthorn products than did HPD. Nevertheless, FD consumed the highest energy and had a long drying time, but its product was the best; AFD had a similar energy cost as HPD, but its drying time was the longest; and MFD had a higher energy cost and longer drying time than HPD, but its product quality was similar to that of FD products. As a result, MFD and AFD had potential to replace FD to yield dried hawthorns with high product quality and relatively low cost.     

Effect of combined infrared freeze drying and microwave vacuum drying on quality of kale yoghurt melts

Abstract

Kale yoghurt melts are proposed as a novel snack that can melt in the mouth. However, such melts with thin fresh pulp were difficult to shape when drying at elevated temperature. In order to obtain a desirable shape and high-quality snack, freeze drying (FD), infrared freeze drying (IRFD), and combination of infrared freeze drying and microwave vacuum drying (IRFD-MVD) were attempted. The effects of these drying techniques on the drying time, energy consumption, bulk density, rehydration time, texture, color, chlorophylls, carotenoids and total phenolics contents as well as antioxidant activity and sensory characteristics of the differently dried products were compared. Nuclear magnetic resonance and magnetic resonance image analyses were also conducted to illustrate the state and proportion of water during the IRFD process. Drying time of IRFD was noted to be significantly shorter than that of FD. IRFD-MVD could further save the time as well as energy consumption of drying and, when properly conducted, could maintain the quality of snacks.     

The drying strategy of atmospheric freeze drying apple cubes based on glass transition

Freeze drying (FD) yields the best quality of dried apple cubes but at the cost of long drying time and also the overall cost. To achieve economical freeze drying along with a high quality product an atmospheric freeze drying (AFD) technique was developed to dry apple cubes. The effect of different air temperature loading scheme on product quality and drying process was studied during AFD. According to the glass transition temperature of apple, a step-up temperature loading strategy for AFD process was developed to reduce the drying time by almost half and provided a similar good product quality.     

Study on a Combination Drying Technique of Sea Cucumber

To develop a highly efficient drying technique for sea cucumber, the effects of different drying methods on the drying procedure and product quality were investigated. FD could lead to the best quality but took the longest time, and AD product quality was too poor. VMD was introduced to combine with FD to get acceptable quality and reduce drying time. In order to get optimal technique parameters, an RSA experiment was carried out. The optimal technique parameters of combination drying of FD-VMD were 45% conversion point, 20–30 kPa chamber pressure, and 350–450 W microwave power. Compared with Freeze Drying (FD), Air Drying (AD)-Vacuum Microwave Drying (VMD) could reduce the drying time to half and maintain good product quality.     

Study on a Combination Drying Technique of Sea Cucumber

To develop a highly efficient drying technique for sea cucumber, the effects of different drying methods on the drying procedure and product quality were investigated. FD could lead to the best quality but took the longest time, and AD product quality was too poor. VMD was introduced to combine with FD to get acceptable quality and reduce drying time. In order to get optimal technique parameters, an RSA experiment was carried out. The optimal technique parameters of combination drying of FD-VMD were 45% conversion point, 20-30 kPa chamber pressure, and 350-450 W microwave power. Compared with Freeze Drying (FD), Air Drying (AD)-Vacuum Microwave Drying (VMD) could reduce the drying time to half and maintain good product quality.     

A Combination of Freeze Drying and Microwave Vacuum Drying of Duck Egg White Protein Powders

High energy consumption during freeze drying (FD) is a major concern that limits its application on common food product manufacturing. In this research, fresh duck egg white protein (FDEWP) powder and desalted duck egg white protein (DDEWP) powder were obtained by a combined two-stage tandem drying technologies (FD and microwave–vacuum drying [MVD]) in order to reduce energy consumption while maintaining good product quality. The results showed that the drying time for the FDEWP and DDEWP powders was significantly decreased by FD + MVD compared to those obtained by the FD-only process. The FDEWP powders dried by FD + MVD had a better color (higher L* and lower b*), lower apparent density, and lower foaming stability but higher emulsifying index than those dried by FD only. The DDEWP powder dried by FD + MVD had a product quality similar to that of FDEWP powder, suggesting that the DDEWP powder could be widely used as a food ingredient.     

Combined Electrohydrodynamic (EHD) and Vacuum Freeze Drying of Sea Cucumber

A combination of electrohydrodynamic drying (EHD) and vacuum freeze drying (FD) is examined as an improved method for dehydrating sea cucumbers. The energy consumption, shrinkage and rehydration ratio, protein content, and sensory properties, such as the color and trimness, of the dried product in the EHD–FD method are measured. Compared with FD, the combined process consumes less drying time and has lower energy consumption than EHD drying alone. Also, the product processed by combined drying displays lower shrinkage, higher rehydration rate and higher protein content, along with better sensory qualities.     

Red pepper (Capsicum annuum L.) drying: Effects of different drying methods on drying kinetics,physicochemical properties,antioxidant capacity,and microstructure

Results of an experimental study are presented and discussed for pulsed vacuum drying (PVD), infrared-assisted hot air-drying (IR-HAD), and hot air-drying (HAD) on drying kinetics, physicochemical properties (surface color, nonenzyme browning index, red pigments, rehydration ratio, water holding capacity, and ascorbic acid), antioxidant capacity (ferric reducing antioxidant power and 2,2-diphenyl-1-picrylhydrazyl radical scavenging capacity), and microstructure of red pepper. As expected, the drying time decreased with an increase in drying air temperature, IR-HAD needed the shortest drying time, followed by HAD and PVD. The effective moisture diffusivity (D_eff) of red pepper under PVD, HAD, and IR-HAD was computed to be in the range 1.33–5.83?×?10^?10, 1.38–6.87?×?10^?10, and 1.75–8.97?×?10^?10 m²/s, respectively. PVD provided superior physicochemical properties of dried red pepper compared to samples dried by HAD and IR-HAD. In detail, PVD yielded higher rehydration ratio, water holding capacity, red pigment and ascorbic acid content, brighter color, lower nonenzyme browning index, and comparable antioxidant capacity compared to samples dried by HAD and IR-HAD at the same drying temperature. Furthermore, PVD promoted the formation of a more porous structure, while HAD and IR-HAD yielded less porous structure. The current findings indicate that PVD drying has the potential to produce high-quality dried red pepper on commercial scale.