Crystal structure of a polyhistidine-tagged recombinant catalytic subunit of cAMP-dependent protein kinase complexed with the peptide inhibitor PKI(5-24) and adenosine

The crystal structure of the hexahistidine-tagged mouse recombinant catalytic subunit (H6-rC) of cAMP-dependent protein kinase (cAPK), complexed with a 20-residue peptide inhibitor from the heat-stable protein kinase inhibitor PKI(5-24) and adenosine, was determined at 2.2 A resolution. Novel crystallization conditions were required to grow the ternary complex crystals. The structure was refined to a final crystallographic R-factor of 18.2% with good stereochemical parameters. The "active" enzyme adopts a "closed" conformation as found in rC:PKI(5-24) [Knighton et al. (1991a,b) Science 253, 407-414, 414-420] and packs in a similar manner with the peptide providing a major contact surface. This structure clearly defines the subsites of the unique nucleotide binding site found in the protein kinase family. The adenosine occupies a mostly hydrophobic pocket at the base of the cleft between the two lobes and is completely buried. The missing triphosphate moiety of ATP is filled with a water molecule (Wtr 415) which replaces the gamma-phosphate of ATP. The glycine-rich loop between beta1 and beta2 helps to anchor the phosphates while the ribose ring is buried beneath beta-strand 2. Another ordered water molecule (Wtr 375) is pentacoordinated with polar atoms from adenosine, Leu 49 in beta-strand 1, Glu 127 in the linker strand between the two lobes, Tyr 330, and a third water molecule, Wtr 359. The conserved nucleotide fold can be defined as a lid comprised of beta-strand 1, the glycine-rich loop, and beta-strand 2. The adenine ring is buried beneath beta-strand 1 and the linker strand (120-127) that joins the small and large lobes. The C-terminal tail containing Tyr 330, a segment that lies outside the conserved core, covers this fold and anchors it in a closed conformation. The main-chain atoms of the flexible glycine-rich loop (residues 50-55) in the ATP binding domain have a mean B-factor of 41.4 A2. This loop is quite mobile, in striking contrast to the other conserved loops that converge at the active site cleft. The catalytic loop (residues 166-171) and the Mg2+ positioning loop (residues 184-186) are a stable part of the large lobe and have low B-factors in all structures solved to date. The stability of the glycine-rich loop is highly dependent on the ligands that occupy the active site cleft with maximum stability achieved in the ternary complex containing Mg x ATP and the peptide inhibitor. In this ternary complex the gamma-phosphate is secured between both lobes by hydrogen bonds to the backbone amide of Ser 53 in the glycine-rich loop and the amino group of Lys 168 in the catalytic loop. In the adenosine ternary complex the water molecule replacing the gamma-phosphate hydrogen bonds between Lys 168 and Asp 166 and makes no contact with the small lobe. This glycine-rich loop is thus the most mobile component of the active site cleft, with the tip of the loop being highly sensitive to what occupies the gamma-subsite.     

Crystal structure of endo-beta-N-acetylglucosaminidase F1, an alpha/beta-barrel enzyme adapted for a complex substrate

Endo-beta-N-acetylglucosaminidase F1 (Endo F1) is an endoglycosidase, secreted by Flavobacterium meningosepticum, that cleaves asparagine-linked oligosaccharides after the first N-acetylglucosamine residue. The enzyme is selective for high-mannose oligosaccharide chains. The crystal structure of Endo F1 has been determined at 2.0-A resolution. The molecular fold consists of a highly irregular alpha/beta-barrel, a commonly observed motif consisting of a cyclic 8-fold repeat of beta-strand/loop/alpha-helix units with an eight-stranded parallel beta-barrel at the center. Endo F1 lacks two of the alpha-helices, those of units 5 and 6. Instead, the links after beta-strands 5 and 6 consist of a short turn followed by a section in an extended conformation that replaces the helix and a long loop at the bottom of the molecule. The absence of any excursion on top of the molecule following beta-strands 5 and 6 results in a pronounced depression in the rim of the barrel. This depression forms one end of a shallow cleft that runs across the surface of the molecule, over the core of the beta-barrel to the area between the loops of units 1 and 2. The active site residues, Asp130 and Glu132, are located at the carboxyl end of beta-strand 4 and extend into this cleft. These residues are surrounded by several tyrosine residues. The cleft area formed by loops 1 and 2 is lined with polar residues, mainly asparagines. The latter area is thought to be responsible for oligosaccharide binding and recognition while the protein moiety of the substrate would be located outside the molecule but adjacent to the area of loops 5 and 6.(ABSTRACT TRUNCATED AT 250 WORDS)     

High resolution structure of the N-terminal domain of tissue inhibitor of metalloproteinases-2 and characterization of its interaction site with matrix metalloproteinase-3

The high resolution structure of the N-terminal domain of tissue inhibitor of metalloproteinases-2 (N-TIMP-2) in solution has been determined using multidimensional heteronuclear NMR spectroscopy, with the structural calculations based on an extensive set of constraints, including 3132 nuclear Overhauser effect-based distance constraints, 56 hydrogen bond constraints, and 220 torsion angle constraints (an average of 26.9 constraints/residue). The core of the protein consists of a five-stranded beta-barrel that is homologous to the beta-barrel found in the oligosaccharide/oligonucleotide binding protein fold. The binding site for the catalytic domain of matrix metalloproteinases-3 (N-MMP-3) on N-TIMP-2 has been mapped by determining the changes in chemical shifts on complex formation for signals from the protein backbone (15N, 13C, and 1H). This approach identified a discrete N-MMP-3 binding site on N-TIMP-2 composed of the N terminus of the protein and the loops between beta-strands AB, CD, and EF. The beta-hairpin formed from strands A and B in N-TIMP-2 is significantly longer than the equivalent structure in TIMP-1, allowing it to make more extensive binding interactions with the MMP catalytic domain. A detailed comparison of the N-TIMP-2 structure with that of TIMP-1 bound to N-MMP-3 (Gomis-Ruth, F.-X., Maskos, K., Betz, M., Bergner, A., Huber, R., Suzuki, K., Yoshida, N., Nagase, H. , Brew, K., Bourne, G. P., Bartunik, H. & Bode, W. (1997) Nature 389, 77-80) revealed that the core beta-barrels are very similar in topology but that the loop connecting beta-strands CD (P67-C72) would need to undergo a large conformational change for TIMP-2 to bind in a similar manner to TIMP-1.     

Crystal structure of the catalytic subunit of cAMP-dependent protein kinase complexed with MgATP and peptide inhibitor

The structure of a ternary complex of the catalytic subunit of cAMP-dependent protein kinase, MgATP, and a 20-residue inhibitor peptide was determined at a resolution of 2.7 A using the difference Fourier technique starting from the model of the binary complex (Knighton et al., 1991a). The model of the ternary complex was refined using both X-PLOR and TNT to an R factor of 0.212 and 0.224, respectively. The orientation of the nucleotide and the interactions of MgATP with numerous conserved residues at the active site of the enzyme are clearly defined. The unique protein kinase nucleotide binding site consists of a five-stranded antiparallel beta-sheet with the base buried in a hydrophobic site along beta-strands 1 and 2 and fixed by hydrogen bonds to the N6 amino and N7 nitrogens. The small lobe secures the nucleotide via a glycine-rich loop and by ion pairing with Lys72 and Glu91. While the small lobe fixes the nontransferable alpha- and beta-phosphates in this inhibitor complex, the gamma-phosphate is secured by two Mg2+ ions and interacts both directly and indirectly with several residues in the large lobe--Asp184, Asn171, Lys168. Asp166 is positioned to serve as a catalytic base. The structure is correlated with previous chemical evidence, and the features that distinguish this nucleotide binding motif from other nucleotide binding proteins are delineated.     

Substrate-induced conformational change in a trimeric ornithine transcarbamoylase

The crystal structure of Escherichia coli ornithine transcarbamoylase (OTCase, EC 2.1.3.3) complexed with the bisubstrate analog N-(phosphonacetyl)-L-ornithine (PALO) has been determined at 2.8-A resolution. This research on the structure of a transcarbamoylase catalytic trimer with a substrate analog bound provides new insights into the linkages between substrate binding, protein-protein interactions, and conformational change. The structure was solved by molecular replacement with the Pseudomonas aeruginosa catabolic OTCase catalytic trimer (Villeret, V., Tricot, C., Stalon, V. & Dideberg, O. (1995) Proc. Natl. Acad. Sci. USA 92, 10762-10766; Protein Data Bank reference pdb 1otc) as the model and refined to a crystallographic R value of 21.3%. Each polypeptide chain folds into two domains, a carbamoyl phosphate binding domain and an L-ornithine binding domain. The bound inhibitor interacts with the side chains and/or backbone atoms of Lys-53, Ser-55, Thr-56, Arg-57, Thr-58, Arg-106, His-133, Asn-167, Asp-231, Met-236, Leu-274, Arg-319 as well as Gln-82 and Lys-86 from an adjacent chain. Comparison with the unligated P. aeruginosa catabolic OTCase structure indicates that binding of the substrate analog results in closure of the two domains of each chain. As in E. coli aspartate transcarbamoylase, the 240s loop undergoes the largest conformational change upon substrate binding. The clinical implications for human OTCase deficiency are discussed.     

Prevalence and determinants of Helicobacter pylori infection in preschool children: a population-based study from Germany

Branching enzyme (BE) belongs to the amylolytic family which contains four highly conserved regions. These regions are proposed to play an important role in catalysis as they are thought to be necessary for catalysis and/or binding the substrate. Only one arginine residue was found to be conserved in a catalytic center at the same position in all known sequences of BEs from various species as well as in the alpha-amylase enzyme family. In mBEII, a conserved Arg residue 384 is in catalytic region 2. We have used site-directed mutagenesis of the Arg-384 residue in order to study its possible role in BE. Previous chemical modification studies (H. Cao and J. Preiss, 1996, J. Prot. Chem. 15, 291-304) suggest that it may play a role in substrate binding. Replacement of Arg-384 by Ala, Ser, Gln, and Glu in the active site caused almost total inactivation. However, a conservative mutation of the conserved Arg-384 by Lys resulted in some residual activity, approximately 5% of the wild-type enzyme. The kinetics of the purified mutant R384K enzyme were investigated and no large effect on the Km of the substrate amylose for BE was observed. Thus, these results suggest that conserved Arg residue 384 in mBEII plays an important role in the catalytic function of BEs but may not be directly involved in substrate binding.     

Mechanism of DNA transesterification by vaccinia topoisomerase: catalytic contributions of essential residues Arg-130, Gly-132, Tyr-136 and Lys-167

Vaccinia topoisomerase, a eukaryotic type IB enzyme, catalyzes relaxation of supercoiled DNA by cleaving and rejoining DNA strands through a DNA- (3'-phosphotyrosyl)-enzyme intermediate. We have performed a kinetic analysis of mutational effects at four essential amino acids: Arg-130, Gly-132, Tyr-136 and Lys-167. Arg-130, Gly-132 and Lys-167 are conserved in all members of the type IB topoisomerase family. Tyr-136 is conserved in all poxvirus topoisomerases. We show that Arg-130 and Lys-167 are required for transesterification chemistry. Arg-130 enhances the rates of both cleavage and religation by 10(5). Lys-167 enhances the cleavage and religation reactions by 10(3) and 10(4), respectively. An instructive distinction between these two essential residues is that Arg-130 cannot be replaced by lysine, whereas substituting Lys-167 by arginine resulted in partial restoration of function relative to the alanine mutant. We propose that both basic residues interact directly with the scissile phosphate at the topoisomerase active site. Mutations at positions Gly-132 and Tyr-136 reduced the rate of strand cleavage by more than two orders of magnitude, but elicited only mild effects on religation rate. Gly-132 and Tyr-136 are suggested to facilitate a pre-cleavage activation step. The results of comprehensive mutagenesis of the vaccinia topoisomerase illuminate mechanistic and structural similarities to site-specific recombinases.     

Effects of the novel neuroprotective agent, riluzole, on human brain function and behavior: I. Double-blind, placebo-controlled EEG mapping and psychometric studies under normoxia

BACKGROUND: Detailed structural information on ribosomal proteins has increased our understanding of the structure, function and evolution of the ribosome. L14 is one of the most conserved ribosomal proteins and appears to have a central role in the ribonucleoprotein complex. Studies have indicated that L14 occupies a central location between the peptidyl transferase and GTPase regions of the large ribosomal subunit. RESULTS: The crystal structure of L14 from Bacillus stearothermophilus has been solved using a combination of isomorphous replacement and multiwavelength anomalous dispersion (MAD) methods. The structure comprises a five-stranded beta-barrel, a C-terminal loop region that contains two small alpha-helices, and a beta-ribbon that projects from the beta-barrel. An analysis of the structure and the conserved amino acids reveals three surface patches that probably mediate L14-RNA and L14-protein interactions within the ribosome. CONCLUSIONS: The accepted role of ribosomal proteins is to promote the folding and stabilization of ribosomal RNA. The L14 structure is consistent with this notion, and it suggests that the RNA binds in two sites. One RNA-binding site appears to recognize a distinct region of ribosomal RNA during particle assembly. The second site is smaller and may become occupied during the later compaction of the RNA. The surface hydrophobic patch is a likely site of protein-protein interaction, possibly with L19.     

Structure and function of Cerebratulus lacteus neurotoxin B-IV: tryptophan-30 is critical for function while lysines-18, -19, -29, and -33 are not required

The Cerebratulus lacteus B-toxins are a family of polypeptide neurotoxins known to bind to crustacean voltage-sensitive sodium channels. We have previously shown that in the most abundant homolog, toxin B-IV, Arg-17 in the N-terminal helix and a positive charge at position 25 in the loop region are essential for function. In this report, we target a tryptophan residue at position 30, as well as lysine residues found in both the N-terminal helix and loop regions by polymerase chain reaction mutagenesis, to determine their contributions to toxin activity. Substitution of Trp-30 with a serine causes a more than 40-fold reduction in specific toxicity, whereas replacement by tyrosine and phenylalanine is well tolerated. The secondary structures of both these muteins are identical to that of the wild-type toxin as determined by circular dichroism spectroscopy. Thermal denaturation experiments also show that their conformational stabilities are intact. These results demonstrate that an aromatic residue at this position is required for toxin function. Charge neutralizing substitutions of Lys-18 and Lys-19 located in the N-terminal helix have very little effect on toxicity, suggesting the nonessentiality of these residues. Similar results are also obtained for the charge neutralizing muteins for Lys-29 and Lys-33 in the loop region. Interestingly, reduction experiments demonstrate that both K29N and W30S are more sensitive to reducing agent than wild-type B-IV, raising the possibility that the loop sequence may modulate toxin stability.     

Residue lysine-34 in GroES modulates allosteric transitions in GroEL

The conserved residue Lys-34 in GroES was replaced by alanine and glutamic acid using site-directed mutagenesis. This residue is near the carboxy terminus of the mobile loop in GroES (residues 17-32) which becomes immobilized upon formation of the GroEL/GroES complex [Landry et al. (1993) Nature 364, 255-258]. Both charge neutralization (Lys-34-->Ala) and charge reversal (Lys-34-->Glu) at this position have little effect on the binding constant of GroES to GroEL, but they increase the enhancement by GroES of cooperativity in ATP hydrolysis by GroEL. This is reflected by a change in the Hill coefficient (at 10 mM K+) from 4.10 (+/- 0.22) in the presence of wild-type GroES to 5.17 (+/- 0.24) and 4.46 (+/- 0.14) in the presence of the GroES mutants Lys-34-->Ala and Lys-34-->Glu, respectively. The results are interpreted using the Monod-Wyman-Changeux (MWC) model for cooperativity [Monod et al. (1965) J. Mol. Biol. 12, 88-118]. They suggest that Lys-34 in GroES modulates the allosteric transition in GroEL by stabilizing a relaxed (R)-like state.     

Site-directed mutagenesis of the yeast V-ATPase A subunit

To investigate the function of residues at the catalytic nucleotide binding site of the V-ATPase, we have carried out site-directed mutagenesis of the VMA1 gene encoding the A subunit of the V-ATPase in yeast. Of the three cysteine residues that are conserved in all A subunits sequenced thus far, two (Cys284 and Cys539) appear essential for correct folding or stability of the A subunit. Mutation of the third cysteine (Cys261), located in the glycine-rich loop, to valine, generated an enzyme that was fully active but resistant to inhibition by N-ethylmalemide, 7-chloro-4-nitrobenz-2-oxa-1,3-diazole, and oxidation. To test the role of disulfide bond formation in regulation of vacuolar acidification in vivo, we have also determined the effect of the C261V mutant on targeting and processing of the soluble vacuolar protein carboxypeptidase Y. No difference in carboxypeptidase Y targeting or processing is observed between the wild type and C261V mutant, suggesting that disulfide bond formation in the V-ATPase A subunit is not essential for controlling vacuolar acidification in the Golgi. In addition, fluid phase endocytosis of Lucifer Yellow, quinacrine staining of acidic intracellular compartments and cell growth are indistinguishable in the C261V and wild type cells. Mutation of G250D in the glycine-rich loop also resulted in destabilization of the A subunit, whereas mutation of the lysine residue in this region (K263Q) gave a V-ATPase complex which showed normal levels of A subunit on the vacuolar membrane but was unstable to detergent solubilization and isolation and was totally lacking in V-ATPase activity. By contrast, mutation of the acidic residue, which has been postulated to play a direct catalytic role in the homologous F-ATPases (E286Q), had no effect on stability or assembly of the V-ATPase complex, but also led to complete loss of V-ATPase activity. The E286Q mutant showed labeling by 2-azido-[32P]ATP that was approximately 60% of that observed for wild type, suggesting that mutation of this glutamic acid residue affected primarily ATP hydrolysis rather than nucleotide binding.     

Identification of active site residues in the "GyrA" half of yeast DNA topoisomerase II

Site-directed mutagenesis was carried out at 10 highly conserved polar residues within the C-terminal half of yeast DNA topoisomerase II, which corresponds to the A subunit of bacterial DNA gyrase, to identify amino acid side chains that augment the active site tyrosine Tyr-782 in the breakage and rejoining of DNA strands. Complementation tests show that alanine substitution at Arg-690, Asp-697, Lys-700, Arg-704, or Arg-781, but not at His-735, His-736, Glu-738, Gln-750, or Asn-828, inactivates the enzyme in vivo. Measurements of DNA relaxation and cleavage by purified mutant enzymes show that these activities are abolished in the R690A mutant and are much reduced in the mutants D697A, K700A, R704A, and R781A. When a Y782F polypeptide with a phenylalanine substituting for the active site tyrosine was expressed in cells that also express the R690A polypeptide, the resulting heterodimeric yeast DNA topoisomerase II was found to nick plasmid DNA. Thus in a dimeric wild-type enzyme, Tyr-782 in one protomer and Arg-690 in the other cooperate in trans in the catalysis of DNA cleavage. For the residues D697A, K700A, R704A, and R781A, their locations in the crystal structures of type II DNA topoisomerase fragments suggest that Arg-781 and Lys-700 might be involved in anchoring the 5' and 3' sides of the broken DNA, respectively, and the roles of Asp-697 and Arg-704 are probably less direct.     

A glutamate residue in the catalytic center of the yeast chorismate mutase restricts enzyme activity to acidic conditions

Chorismate mutase acts at the first branchpoint of aromatic amino acid biosynthesis and catalyzes the conversion of chorismate to prephenate. Comparison of the x-ray structures of allosteric chorismate mutase from the yeast Saccharomyces cerevisiae with Escherichia coli chorismate mutase/prephenate dehydratase suggested conserved active sites between both enzymes. We have replaced all critical amino acid residues, Arg-16, Arg-157, Lys-168, Glu-198, Thr-242, and Glu-246, of yeast chorismate mutase by aliphatic amino acid residues. The resulting enzymes exhibit the necessity of these residues for catalytic function and provide evidence of their localization at the active site. Unlike some bacterial enzymes, yeast chorismate mutase has highest activity at acidic pH values. Replacement of Glu-246 in the yeast chorismate mutase by glutamine changes the pH optimum for activity of the enzyme from a narrow to a broad pH range. These data suggest that Glu-246 in the catalytic center must be protonated for maximum catalysis and restricts optimal activity of the enzyme to low pH.     

Structural basis for inhibition of the protein tyrosine phosphatase 1B by phosphotyrosine peptide mimetics

Protein tyrosine phosphatases regulate diverse cellular processes and represent important targets for therapeutic intervention in a number of diseases. The crystal structures of protein tyrosine phosphatase 1B (PTP1B) in complex with small molecule inhibitors based upon two classes of phosphotyrosine mimetics, the (difluoronaphthylmethyl)phosphonic acids and the fluoromalonyl tyrosines, have been determined to resolutions greater than 2.3 A. The fluoromalonyl tyrosine residue was incorporated within a cyclic hexapeptide modeled on an autophosphorylation site of the epidermal growth factor receptor. The structure of this inhibitor bound to PTP1B represents the first crystal structure of a non-phosphonate-containing inhibitor and reveals the mechanism of phosphotyrosine mimicry by the fluoromalonyl tyrosine residue and the nature of its interactions within the catalytic site of PTP1B. In contrast to complexes of PTP1B with phosphotyrosine-containing peptides, binding of the fluoromalonyl tyrosine residue to the catalytic site of PTP1B is not accompanied by closure of the catalytic site WPD loop. Structures of PTP1B in complex with the (difluoronaphthylmethyl)phosphonic acid derivatives reveal that substitutions of the naphthalene ring modulate the mode of inhibitor binding to the catalytic site and provide the potential for enhanced inhibitor affinity and the generation of PTP-specific inhibitors. These results provide a framework for the rational design of higher affinity and more specific phosphotyrosine mimetic inhibitors of not only protein tyrosine phosphatases but also SH2 and PTB domains.     

Membrane assembly of the Escherichia coli outer membrane protein OmpA: exploring sequence constraints on transmembrane beta-strands

The eight-stranded antiparallel beta-barrel domain of the OmpA protein from Escherichia coli serves as a paradigm for the study of membrane assembly of integral beta-structured membrane proteins. Previous studies have shown that neither the periplasmic turns nor the surface-exposed loops contain topogenic information. Consequently, the question of whether any structural constraint is imposed onto individual transmembrane beta-strands is now addressed. To this end, amino acid sequences of beta-strands 4, 6 and 8 were randomized. In vivo membrane assembly of mutant proteins was assayed and 288 variants were sequenced. Three parameters were found to be important for efficient membrane assembly. (i) At least four of five randomized residues with side-chains pointing towards the lipid bilayer must be hydrophobic and none of the three central residues must be charged. (ii) Side-chains pointing into the beta-barrel interior must not be enlarged too much, possibly because of packing constraints. (iii) Proline residues are, in general, hardly tolerated in the transmembrane beta-strands.     

RNA structure inhibits the TRAP (trp RNA-binding attenuation protein)-RNA interaction

TRAP (trp RNA-binding attenuation protein) regulates expression of the tryptophan biosynthetic genes in response to tryptophan in Bacillus subtilis by binding to two sites containing a series of 9 or 11 (G/U)AG triplet repeats that are generally separated by two or three spacer nucleotides. Previous mutagenesis experiments have identified three TRAP residues, Lys-37, Lys-56, and Arg-58 that are essential for RNA binding. The location of these residues on the TRAP oligomer supports the proposal that RNA binds TRAP by encircling the TRAP oligomer. In this work, we show that RNAs containing 11 GAG or UAG repeats separated by CC dinucleotide spacers (((G/U)AGCC)11) form stable structures that inhibit binding to TRAP. This conclusion is based on the effects of temperature and Mg2+ on the affinity of TRAP for RNAs with CC spacers combined with UV hyperchromicity and circular dichroism. Furthermore, introducing the base analogue 7-deazaguanosine in the ((G/U)AGCC)11 RNAs stabilized the TRAP-RNA interaction. This effect was associated with decreased stability of the RNA structure as measured by circular dichroism spectroscopy. The precise nature of the structure of the ((G/U)AGCC)11 RNAs is not known but evidence is presented that it involves noncanonical interactions. We also observed that substitution of Arg-58 with Lys further reduced the ability of TRAP to interact with structured RNAs. Since in vivo function of TRAP may involve binding to structured RNAs, we suggest a potential function for this residue, which is conserved in TRAP from three different bacilli.     

Solution structure of bovine heart fatty acid-binding protein (H-FABPc)

Fatty acid-binding protein (FABP) from bovine heart, a 15 kDa cytoplasmic protein has been investigated by multi-dimensional homonuclear and heteronuclear NMR-spectroscopy. Perdeuterated palmitic acid has been used as fatty acid ligand. The tertiary structure has been determined from distance geometry calculations with the variable target functions algorithm (DIANA) utilizing 1027 interproton distance constraints, which were obtained from 1H-homonuclear NOESY spectra. Overlapping NOE crosspeaks were assigned by heteronuclear multidimensional NMR-experiments with a 15N-labelled sample. The tertiary structure resembles a beta-barrel (beta-clam) consisting of ten anti-parallel beta-strands and a short helix-turn-helix motif. The beta-strands are arranged in two nearly orthogonal beta-sheets composed of 5 strands each. The solution structure is compared with the x-ray crystal structure of bovine heart and rat intestinal FABPs.     

Computer simulations of the OmpF porin from the outer membrane of Escherichia coli

Molecular dynamics simulations were used to study the structure and dynamics of the Escherichia coli OmpF porin, which is composed of three identical 16-stranded beta-barrels. Simulations of the full trimer in the absence of water and the membrane led to significant contraction of the channel in the interior of each beta-barrel. With very weak harmonic constraints (0.005 kcal/mol A2/atom) applied to the main-chain C alpha atoms of the beta-barrel, the structure was stabilized without alteration of the average fluctuations. The resulting distribution of the fluctuations (small for beta-strands, large for loops and turns) is in good agreement with the x-ray B factors. Dynamic cross-correlation functions showed the importance of coupling between the loop motions and barrel flexibility. This was confirmed by the application of constraints corresponding to the observed temperature factors to the barrel C alpha atoms. With these constraints, the beta-barrel fluctuations were much smaller than the experimental values because of the intrinsic restrictions on the atomic motions, and the loop motions were reduced significantly. This result indicates that considerable care is required in introducing constraints to keep proteins close to the experimental structure during simulations, as has been done in several recent studies. Loop 3, which is thought to be important in gating the pore, undergoes a displacement that shifts it away from the x-ray structure. Analysis shows that this arises from the breakdown of a hydrogen bond network, which appears to result more from the absence of solvent that from the use of standard ionization states for the side chains of certain beta-barrel residues.     

Maltose-binding protein interacts simultaneously and asymmetrically with both subunits of the Tar chemoreceptor

The Tar chemotactic signal transducer of Escherichia coli mediates attractant responses to L-aspartate and to maltose. Aspartate binds across the subunit interface of the periplasmic receptor domain of a Tar homodimer. Maltose, in contrast, first binds to the periplasmic maltose-binding protein (MBP), which in its ligand-stabilized closed form then interacts with Tar. Intragenic complementation was used to determine the MBP-binding site on the Tar dimer. Mutations causing certain substitutions at residues Tyr-143, Asn-145, Gly-147, Tyr-149, and Phe-150 of Tar lead to severe defects in maltose chemotaxis, as do certain mutations affecting residues Arg-73, Met-76, Asp-77, and Ser-83. These two sets of mutations defined two complementation groups when the defective proteins were co-expressed at equal levels from compatible plasmids. We conclude that MBP contacts both subunits of the Tar dimer simultaneously and asymmetrically. Mutations affecting Met-75 could not be complemented, suggesting that this residue is important for association of MBP with each subunit of the Tar dimer. When the residues involved in interaction with MBP were mapped onto the crystal structure of the Tar periplasmic domain, they localized to a groove at the membrane-distal apex of the domain and also extended onto one shoulder of the apical region.     

Visualization of the cysteinyl-phosphate intermediate of a protein-tyrosine phosphatase by x-ray crystallography

Protein-tyrosine phosphatases (PTPs) are signal transduction enzymes that catalyze the dephosphorylation of phosphotyrosine residues via the formation of a transient cysteinyl-phosphate intermediate. The mechanism of hydrolysis of this intermediate has been examined by generating a Gln-262 --> Ala mutant of PTP1B, which allows the accumulation and trapping of the intermediate within a PTP1B crystal. The structure of the intermediate at 2.5-A resolution reveals that a conformationally flexible loop (the WPD loop) is closed over the entrance to the catalytic site, sequestering the phosphocysteine intermediate and catalytic site water molecules and preventing nonspecific phosphoryltransfer reactions to extraneous phosphoryl acceptors. One of the catalytic site water molecules, the likely nucleophile, forms a hydrogen bond to the putative catalytic base, Asp-181. In the wild-type enzyme, the nucleophilic water molecule would be coordinated by the side chain of Gln-262. In combination with our previous structural data, we can now visualize each of the reaction steps of the PTP catalytic pathway. The hydrolysis of the cysteinyl-phosphate intermediate of PTPs is reminiscent of GTP hydrolysis by the GTPases, in that both families of enzymes utilize an invariant Gln residue to coordinate the attacking nucleophilic water molecule.