The vibration of inclined backrests: perception and discomfort of vibration applied parallel to the back in the z-axis of the body

This study determined how backrest inclination and the frequency of vibration influence the perception and discomfort of vibration applied parallel to the back (vertical vibration when sitting upright, horizontal vibration when recumbent). Subjects experienced backrest vibration at frequencies in the range 2.5 to 25 Hz at vibration magnitudes up to 24 dB above threshold. Absolute thresholds, equivalent comfort contours, and the principal locations for feeling vibration were determined with four backrest inclinations: 0° (upright), 30°, 60° and 90° (recumbent). With all backrest inclinations, acceleration thresholds and equivalent comfort contours were similar and increased with increasing frequency at 6 dB per octave (i.e. velocity constant). It is concluded that backrest inclination has little effect on the frequency dependence of thresholds and equivalent comfort contours for vibration applied along the back, and that the W (d) frequency weighting in current standards is appropriate for evaluating z-axis vibration of the back at all backrest inclinations. STATEMENT OF RELEVANCE: To minimise the vibration discomfort of seated people, it is necessary to understand how discomfort varies with backrest inclination. It is concluded that the vibration on backrests can be measured using a pad between the backrest and the back, so that it reclines with the backrest, and the measured vibration evaluated without correcting for the backrest inclination.     

Equivalent comfort contours for vertical seat vibration: effect of vibration magnitude and backrest inclination

This study determined how backrest inclination and the frequency and magnitude of vertical seat vibration influence vibration discomfort. Subjects experienced vertical seat vibration at frequencies in the range 2.5-25 Hz at vibration magnitudes in the range 0.016-2.0 ms(-2) r.m.s. Equivalent comfort contours were determined with five backrest conditions: no backrest, and with a stationary backrest inclined at 0° (upright), 30°, 60° and 90°. Within all conditions, the frequency of greatest sensitivity to acceleration decreased with increasing vibration magnitude. Compared to an upright backrest, around the main resonance of the body, the vibration magnitudes required to cause similar discomfort were 100% greater with 60° and 90° backrest inclinations and 50% greater with a 30° backrest inclination. It is concluded that no single frequency weighting provides an accurate prediction of the discomfort caused by vertical seat vibration at all magnitudes and with all backrest conditions. PRACTITIONER SUMMARY: Vertical seat vibration is a main cause of vibration discomfort for drivers and passengers of road vehicles. A frequency weighting has been standardised for the evaluation of vertical seat vibration when sitting upright but it was not known whether this weighting is suitable for the reclined sitting postures often adopted during travel.     

Vibration and comfort HI. Translational vibration of the feet and back

The effects on discomfort of the frequency and direction of the translational vibration of a footrest and flat firm backrest have been studied in two experiments. At frequencies in the range 2.5-63 Hz, the first experiment determined the levels of fore-and-aft, lateral and vertical vibration of the feet of seated subjects which caused them discomfort equivalent to that from 0.8 m/s² r.m.s. 10 Hz vertical vibration of a firm flat seat. The levels of fore-and-aft, lateral and vertical vibration at the back of a seat which were equivalent to 0.8 m/s² r.m.s. 10 Hz vertical seat vibration were determined in the second experiment. The vibration of the feet or back occurred without simultaneous vibration at the seat.

Individual and group equivalent comfort contours are presented. It is concluded that the data provide a useful initial indication of the relative contribution of foot and back vibration to discomfort. Equivalent comfort contours for foot vibration were similar for all three directions of vibration. The contours for vibration of the back show a high sensitivity to fore-and-aft vibration. The results obtained from two additional studies show that vibration from a backrest and other variations in seating conditions can influence subject comfort.     

Vibration and comfort I. Translational seat vibration

A series of studies of discomfort caused by multi-axis vibration at the seat, feet and back of seated persons is described. This first paper reports on studies with translational seat vibration. Two experiments concerned with the effects of level, frequency and direction of the translational vibration of a firm flat seat are reported.

At octave centre frequencies from 1 to 63 Hz the first experiment determined the levels of fore-and-aft, lateral and vertical seat vibration which caused discomfort equivalent to 0.5 and l.25m/s²r.m.s. 10 Hz vertical seat vibration. In the second experiment, comfort contours equivalent to 0.8m/s²r.m.s. 10 Hz vertical seat vibration and subject transmissibilities were determined from 18 males and 18 females at preferred third-octave centre frequencies from 1 to 100 Hz. In both studies the feet of subjects were not vibrated and there was no backrest.

It was concluded that the shapes of equivalent comfort contours need not normally depend on vibration level. The forms of both individual and group equivalent comfort contours and seat-to-head transmissibilities are presented. Significant correlations were found between subject characteristics (size and transmissibility) and subject relative discomfort. The males and females produced similar equivalent comfort contours.

Information on the computerized application of the method of constant stimuli which was developed for the series of experiments is presented together with a consideration of alternative methods of determining the central tendency of the data. A method of assessing the effect of vibrator distortion on judgements of equivalent discomfort is also defined.     

Bedside safety rails: assessment of strength requirements and the appropriateness of current designs

This second paper in a series of studies of the discomfort produced by multi-axis vibration is concerned with rotational seat vibration. The effects of level, frequency and direction of the roll, pitch and yaw vibration of a firm flat seat have been studied in two experiments. At octave centre frequencies in the range 1-31.5 Hz the first experiment determined the levels of roll, pitch and yaw seat vibration which caused discomfort equivalent to 0-5 and l.25m/s²r.m.s. 10 Hz vertical seat vibration. In the second experiment, comfort contours equivalent to 0.8 m/s² r.m.s. 10 Hz vertical seat vibration were determined from 18 males and 18 females at preferred third-octave centre frequencies from 1 to 31.5 Hz. In all cases the axis of rotation passed through the centre of the seat surface. There was no vibration of the feet and no backrest.

It was concluded that the shape of equivalent comfort contours need not normally depend on vibration, level. Both individual and group equivalent comfort contours are presented. Although there were significant correlations between subject size and subject relative discomfort it is not thought that these correlations have much practical application. In all three axes the median contours of vibration acceleration increase in proportion to vibration frequency. Sensitivity is greatest for roll vibration and least for yaw vibration of the seat.     

Response of the seated human body to whole-body vertical vibration: discomfort caused by sinusoidal vibration

Frequency weightings for predicting vibration discomfort assume the same frequency-dependence at all magnitudes of vibration, whereas biodynamic studies show that the frequency-dependence of the human body depends on the magnitude of vibration. This study investigated how the frequency-dependence of vibration discomfort depends on the acceleration and the force at the subject–seat interface. Using magnitude estimation, 20 males and 20 females judged their discomfort caused by sinusoidal vertical acceleration at 13 frequencies (1–16 Hz) at magnitudes from 0.1 to 4.0 ms^? 2 r.m.s. The frequency-dependence of their equivalent comfort contours depended on the magnitude of vibration, but was less dependent on the magnitude of dynamic force than the magnitude of acceleration, consistent with the biodynamic non-linearity of the body causing some of the magnitude-dependence of equivalent comfort contours. There were significant associations between the biodynamic responses and subjective responses at all frequencies in the range 1–16 Hz.

Practitioner Summary: Vertical seat vibration causes discomfort in many forms of transport. This study provides the frequency-dependence of vibration discomfort over a range of vibration magnitudes and shows how the frequency weightings in the current standards can be improved.     

The influence of seat backrest angle on perceived discomfort during exposure to vertical whole-body vibration

National and International Standards (e.g. BS 6841 and ISO 2631-1) provide methodologies for the measurement and assessment of whole-body vibration in terms of comfort and health. The EU Physical Agents (Vibration) Directive (PAVD) provides criteria by which vibration magnitudes can be assessed. However, these standards only consider upright seated (90°) and recumbent (0°) backrest angles, and do not provide guidance for semi-recumbent postures. This article reports an experimental programme that investigated the effects of backrest angle on comfort during vertical whole-body vibration. The series of experiments showed that a relationship exists between seat backrest angle, whole-body vibration frequency and perceived levels of discomfort. The recumbent position (0°) was the most uncomfortable and the semi-recumbent positions of 67.5° and 45° were the least uncomfortable. A new set of frequency weighting curves are proposed which use the same topology as the existing BS and ISO standards. These curves could be applied to those exposed to whole-body vibration in semi-recumbent postures to augment the existing standardised methods. PRACTITIONER SUMMARY: Current vibration standards provide guidance for assessing exposures for seated, standing and recumbent positions, but not for semi-recumbent postures. This article reports new experimental data systematically investigating the effect of backrest angle on discomfort experienced. It demonstrates that most discomfort is caused in a recumbent posture and that least was caused in a semi-recumbent posture.     

Vibration and comfort IV. Application of experimental results

In this conclusion to a four-part series of papers, an interpretation of the experimental data presented in the earlier three papers is given. The results obtained from the experiments are compared with those obtained by other researchers. A set of simplified approximations to the various equivalent comfort contours are defined and a general approach to the prediction of discomfort due to multi-axis, multi-input complex vibration is given.

It is shown that the results for translational vibration of a seat surface supporting the body are reasonably consistent with some previous studies. Although the contours for fore-and-aft and lateral vibration are in agreement with those in ISO 2631 (1978) there is evidence that sensitivity to vertical seat vibration above 8 Hz should be greater than defined in that standard. It is shown that the results for rotational seat vibration differ by an order of magnitude from those published by other authors but that this difference may be explained by the positions of the centres of rotation used in other studies.

It is shown that simple approximations to the median equivalent comfort contours for translational and rotational seat vibration and translational foot and back vibration may be defined by contours on acceleration frequency graph having a slope of O dB per octave (constant acceleration) and 6 dB per octave (constant velocity). For most conditions these contours fall within the 25th-75th percentile of the experimental data. The application of these contours as frequency weightings for general vibration evaluations is discussed.     

Biomechanical response of the musculoskeletal system to whole body vibration using a seated driver model

ObjectiveThis study aimed to assess the effects of backrest inclination and vibration frequency on muscle activity in a dynamic environment using a musculoskeletal model.MethodThe muscle activity modeling method was used to analyze a full body musculoskeletal system of a seated person with a public domain rigid body model in an adjustable car seat. This model was established using AnyBody Modeling System, based on the inverse dynamic approach. And the min/max criterion in dealing with the muscle redundancy problem. Ten healthy subjects were exposed to whole body vibration (WBV) with five frequencies (3, 4.5, 6, 7, and 8 Hz) in the vertical direction in a randomized order on three separate days. The displacement of the seat-pan and head was measured using a hybrid Polaris spectra system to obtain the seat-to-head (STH) transmissibility. Muscle oxygenation was measured using near-infrared spectroscopy. The validity of the model was tested using STH transmissibility and muscle oxygenation.ResultsIncreased vibration frequency caused high muscle activities of the abdomen and the right leg with a backrest forward inclination angle. The muscle activities of the left leg decreased at a backrest backward inclination except at inclination angles of 15° and 30°. Muscle activity of the lumbar suddenly increased at a backrest inclination angle of 5° and vibration frequency of 5 Hz. Muscle activities were higher under vibration than that without vibration.ConclusionVibration frequency significantly affected the muscle activity of the lumbar area. Likewise, the inclination degree of the backrest significantly affected the muscle activities of the right leg and the abdomen. The combination of vibration and forward inclination of the backrest can be used to maximize the muscle activity of the leg, similar to the abdomen and lumbar muscles.Relevance to the industryThe musculoskeletal model established in the present study provides a method that can be used to investigate the biomechanical response of seated drivers to WBV. This model helps protect drivers from occupational injury.     

Analysis of lumbar spine injury with different back inclinations under whole-body vibration: A finite element study based on whole human body models

Whole-body vibration was found to be a cause of low back pain. Different back inclinations might change the forces on the lumbar spine, resulting in different responses to the vibration. The aim of this study was to investigate the effects of back inclinations on the lumbar spine from the perspective of analysing the internal loads and deformations on the intervertebral discs. Whole human body finite element models at 90°, 95°, 100°, 105°, 110° and 115° inclinations were used to provide a whole-body condition when predicting the behaviour of the lumbar spine. Von Mises stress on the annulus fibrosus, intradiscal pressure, and intervertebral disc height were extracted. The Risk Factors were calculated to evaluate the spinal injury risk under long-term vibration conditions. The results showed that the internal loads and deformations on the intervertebral disc decreased and then increased with the increase of the inclination, and the responses were lower at the 95° and 100° inclinations. The Risk Factors at different inclinations at the 3 Hz load were 0.61, 0.49, 0.53, 0.58, 0.58, and 0.69, respectively, at the 7 Hz load were 0.97, 0.66, 0.71, 0.86, 0.87, and 0.97, respectively, which also showed that injury risk was at a lower level at 95° and 100° inclinations. This study found a relationship between injury risk and back inclination. Occupational drivers are advised to choose a back inclination between 95° and 100° to reduce the possible adverse effects of whole-body vibration during the working condition.     

Effect of reclining a seat on the discomfort from vibration and shock on fast boats

Passengers and crew on fast boats can experience high magnitudes of whole-body vibration and mechanical shocks that may present risks to health and cause discomfort. This study investigated the influence of reclining a seat on the discomfort caused by fast-boat motion and whether discomfort can be predicted by overall ride values according to current standards. Subjects judged the discomfort of simulations of a recorded fast boat motion in a seat reclined by 0°, 15°, 30°, 45°, or 60°. Reclining the seat caused no significant change in overall discomfort, suggesting that if a reclined seat can be shown to reduce risks of injury it may be acceptable in respect of comfort. The findings are inconsistent with the predictions of standards and show that revised frequency weightings are required to account for seat pan or seat back inclination.     

Subjective discomfort caused by vertical whole-body vibration in the frequency range 2–100 Hz

Current standards assume the same frequency weightings for discomfort at all magnitudes of vibration, whereas biodynamic and psychological studies show that the frequency-dependence of objective and subjective responses of the human body depends on the magnitude of vibration. This study investigated the discomfort of seated human body caused by vertical whole-body vibration over the frequency range 2–100?Hz at relatively high magnitudes from 1.0 to 2.5?ms^?2 r.m.s. Twenty-eight subjects (15 males and 13 females) judged the discomfort using the absolute magnitude estimation method. The rate of growth of discomfort with increasing vibration magnitude was highly dependent on the frequency, so the shapes of the equivalent comfort contours depended on the magnitude of vibration and no single frequency weighting would be appropriate for all magnitudes. The equivalent comfort contours indicated that the standards and previous relevant studies underestimated the vibration discomfort at frequencies greater than about 30?Hz.

Practitioner Summary: The discomfort caused by vertical vibration at relatively high frequencies can be severe, particularly at relatively great magnitudes in transport. This study provides the frequency-dependence of vibration discomfort at 2–100?Hz, and shows how the frequency weightings in the current standards can be improved at relatively high frequencies.     

The effects of vibration frequency and direction on the location of areas of discomfort caused by whole-body vibration

Although much research has been devoted to the determination of equivalent comfort contours for human response to whole-body vibration little consideration has been given to the source of the feelings that give rise to such comfort contours. This paper shows that for vertical vibration there is a distinct difference in the locations of discomfort on the body at different frequencies and that the locations are not much affected by the vibration level. For horizontal motions, feelings of discomfort predominated in the lower abdomen and buttocks irrespective of vibration frequency or direction. A semantic scaling technique indicates the maximum sensitivity to vertical vibration acceleration in the 4 to 16 Hz range, but for both fore-and aft and lateral vibration there is a decrease in sensitivity with increasing frequency above 2Hz.     

(Abstracts)Changing Industrial Demands

Abstract

The frequency dependence of discomfort caused by vertical mechanical shocks has been investigated with 20 seated males exposed to upward and downward shocks at 13 fundamental frequencies (1–16 Hz) and 18 magnitudes (±0.12 to ±8.3 ms^?2). The rate of growth of discomfort with increasing shock magnitude depended on the fundamental frequency of the shocks, so the frequency dependence of equivalent comfort contours (for both vertical acceleration and vertical force measured at the seat) varied with shock magnitude. The rate of growth of discomfort was similar for acceleration and force, upward and downward shocks, and lower and higher magnitude shocks. The frequency dependence of discomfort from shocks differs from that of sinusoidal vibrations having the same fundamental frequencies. This arises in part from the frequency content of the shock. Frequency weighting W_b in BS 6841:1987 and ISO 2631-1:1997 provided reasonable estimates of the discomfort caused by the shocks investigated in this study.

Practitioner Summary: No single frequency weighting can accurately predict the discomfort caused by mechanical shocks over wide ranges of shock magnitude, but vibration dose values with frequency weighting W_b provide reasonable estimates of discomfort caused by shocks similar to those investigated in this study with peak accelerations well below 1 g.     

Equivalent comfort contours for vertical vibration of steering wheels: effect of vibration magnitude, grip force, and hand position

Vehicle drivers receive tactile feedback from steering-wheel vibration that depends on the frequency and magnitude of the vibration. From an experiment with 12 subjects, equivalent comfort contours were determined for vertical vibration of the hands at two positions with three grip forces. The perceived intensity of the vibration was determined using the method of magnitude estimation over a range of frequencies (4-250 Hz) and magnitudes (0.1-1.58 ms⁻² r.m.s.). Absolute thresholds for vibration perception were also determined for the two hand positions over the same frequency range. The shapes of the comfort contours were strongly dependent on vibration magnitude and also influenced by grip force, indicating that the appropriate frequency weighting depends on vibration magnitude and grip force. There was only a small effect of hand position. The findings are explained by characteristics of the Pacinian and non-Pacinian tactile channels in the glabrous skin of the hand.     

Office task effects on comfort and body dynamics in five dynamic office chairs

In the present study, we investigated the effect of office tasks on posture and movements in field settings, and the comfort rating for chair characteristics and correlation with type of task. The tasks studied were: computer work, telephoning, desk work and conversation. Postures, movements, chair part inclinations and comfort rating data were collected from 12 subjects. Computer work showed the lowest physical activity, together with upright trunk and head position and low backrest inclination. Conversation shows the highest activity of head legs and low back together with the highest cervical spine extension. In contrast, desk work provoked the most cervical spine flexion and showed the second lowest activity. The telephoning tasks showed medium activity and the highest kyphosis. Conversation showed the highest backrest inclination. Positive comfort relations were found for computer work and a "swing system" chair, for telephoning and an active longitudinal seat rotation, and for desk work and a chair with a three-dimensionally moveable seat.     

The influence of seat backrest angle on human performance during whole-body vibration

This study investigated the effects of reclined backrest angles on cognitive and psycho-motor tasks during exposure to vertical whole-body vibration. Twenty participants were each exposed to three test stimuli of vertical vibration: 2-8 Hz; 8-14 Hz and 14-20 Hz, plus a stationary control condition whilst seated on a vibration platform at five backrest angles: 0° (recumbent, supine) to 90° (upright). The vibration magnitude was 2.0 ms(-2) root-mean-square. The participants were seated at one of the backrest angles and exposed to each of the three vibration stimuli while performing a tracking and choice reaction time tasks; then they completed the NASA-TLX workload scales. Apart from 22.5° seat backrest angle for the tracking task, backrest angle did not adversely affect the performance during vibration. However, participants required increased effort to maintain performance during vibration relative to the stationary condition. These results suggest that undertaking tasks in an environment with vibration could increase workload and risk earlier onset of fatigue. PRACTITIONER SUMMARY: Current vibration standards provide guidance for assessing exposures for seated, standing and recumbent positions, but not for semi-recumbent postures. This paper reports new experimental data systematically investigating the effect of backrest angle on human performance. It demonstrates how workload is elevated with whole-body vibration, without getting affected by backrest angle.     

Perception of fore-and-aft whole-body vibration intensity measured by two methods

This experimental study investigated the perception of fore-and-aft whole-body vibration intensity using cross-modality matching (CM) and magnitude estimation (ME) methods. Thirteen subjects were seated on a rigid seat without a backrest and exposed to sinusoidal stimuli from 0.8 to 12.5 Hz and 0.4 to 1.6 ms^? 2 r.m.s. The Stevens exponents did not significantly depend on vibration frequency or the measurement method. The ME frequency weightings depended significantly on vibration frequency, but the CM weightings did not. Using the CM and ME weightings would result in higher weighted exposures than those calculated using the ISO (2631-1, 1997) W_d. Compared with ISO W_k, the CM and ME-weighted exposures would be greater at 1.6 Hz and lesser above that frequency. The CM and ME frequency weightings based on the median ratings for the reference vibration condition did not differ significantly. The lack of a method effect for weightings and for Stevens exponents suggests that the findings from the two methods are comparable.     

The interrelationship of the thorax and pelvis under varying task constraints

The purpose of this study was to investigate the interrelationship between the thorax and pelvis during coupled movement patterns. Fifty-seven participants were assessed using an infrared motion analysis system to track trunk movement during maximal pelvis and thorax rotations over four trunk inclinations and two pelvic constraint conditions. A repeated-measures multivariate analysis of variance investigated the effects of forward trunk inclination and pelvic constraint on thorax and pelvic rotation. Forward trunk inclination from neutral to 45° resulted in a 46% (p < 0.001) decrease in axial pelvic rotation and a 15% (p < 0.001) decrease in axial thorax rotation with an unconstrained pelvis. A constrained pelvis resulted in a 15% (p < 0.001) decrease in axial thorax rotation. An externally constrained pelvis allowed the thorax to achieve an average of 18° (SD = 2°) greater rotational range of motion across all angles. This study reinforced the importance of allowing the pelvis to rotate during whole body axial rotation tasks.

Practitioner Summary: Results indicated that maximum axial trunk rotation is best achieved in a neutral posture, when the pelvis is allowed to contribute and flexion at the hips should be minimised. For example, if a recumbent task requires rotation of the torso, then the chair seat should be allowed to swivel.