Far-infrared reduced graphene oxide as high performance electrodes for supercapacitors

We report a novel far-infrared (FIR) thermal reduction process to effectively reduce graphene oxide films for supercapacitor electrode applications. The binder-free graphene oxide films used in this study were produced by electro-spray deposition of a graphene oxide colloidal solution onto stainless steel current collectors. The reduction of graphene oxide was performed using a commercial FIR convection oven that is ubiquitous in homes for cooking and heating food. The reduction process incorporated a simple, one-step FIR irradiation carried out in ambient air. Further, the FIR irradiation process was completed in ∼3 min, wherein neither special atmosphere nor high temperature was employed, resulting in an economic, efficient and simplified processing technique. The as-produced FIR graphene electrode gave a specific capacitance of ∼320 F/g at a current density of ∼0.2 A/g with less than 94% loss in specific capacitance over 10,000 charge/discharge cycles. This is one of the best specific capacitances reported for all-carbon electrodes without any additives. Even at ultrafast charge/discharge rates (current densities as high as ∼100 A/g), the FIR graphene electrode still delivered specific capacitances in excess of 90 F/g. The measured energy and power densities of the FIR supercapacitors were found to be ∼3–6 times higher than commercial (activated carbon) supercapacitor devices. This excellent electrochemical performance of the FIR graphene coupled with its ease of production (in air at low temperatures) using a commercial home-use FIR convection oven indicates the significant potential of this concept for large-scale commercial electrochemical supercapacitor applications.     

Electrochemically reduced graphene oxide sheets for use in high performance supercapacitors

Graphene oxide (GO) was reduced by a rapid, effective and eco-friendly electrochemical method of repetitive cathodic cyclic potential cycling, without using any reducing reagents. The electrochemically reduced graphene oxide (ERGO) was characterized by UV–vis, EIS and zeta-potential measurements. Most of the oxygen functional groups in ERGO were successfully removed resulting in smaller charge transfer resistance. However, some electrochemically stable residuals still remained, enabling ERGO to facilitate electrolyte penetration and pseudocapacitance. Since ERGO was readily stabilized by cathodic potential cycling, it exhibited an outstanding stability in cycle life, nearly with no capacitive loss from the second cycle on. A specific capacitance of 223.6 F g⁻¹ was achieved at 5 mV s⁻¹, which makes the ERGO a competitive material for electrochemical energy storage.     

Multiscale patterning of graphene oxide and reduced graphene oxide for flexible supercapacitors

A simple and facile method for multiscale, in-plane patterning of graphene oxide and reduced graphene oxide (GO–rGO) was developed by region-specific reduction of graphene oxide (GO) under a mild irradiation. The UV-induced reduction of graphene oxide was monitored by various spectroscopic techniques, including optical absorption, X-ray photoelectron spectroscopy (XPS), Raman, and X-ray diffraction (XRD), while the resultant GO–rGO patterned film morphology was studied on optical microscope, scanning electron microscope (SEM), and atomic force microscope (AFM). Flexible symmetric and in-plane supercapacitors were fabricated from the GO–rGO patterned polyethylene terephthalate (PET) electrodes to show capacitances up to 141.2 F/g.     

Highly soluble polyetheramine-functionalized graphene oxide and reduced graphene oxide both in aqueous and non-aqueous solvents

Among many methods to synthesize graphene, solution-based processing provides many advantages owing to its low cost, high productivity, chemical versatility, and scalability. In particular, graphene oxide (GO) is one of the most promising nanocarbons that enable the incorporation of graphene and related materials into bulk materials and nanocomposites. GO has hydrophilic nature that enables straightforward dispersion in aqueous solution by sonication, but GO show poor dispersibility in common organic solvents, which prevent much wider applications such as solution-mixing polymer nanocomposites. Here we prepared highly soluble, functionalized GO in both aqueous and non-aqueous solvents. This was achieved by reacting polyetheramine consisting of amphiphilic components, e.g., polypropylene oxide and polyethylene oxide, with carboxylic acid groups at GO edges. Moreover, the reduced GO (rGO) was also highly dispersible in aqueous solution as well as non-aqueous solutions. These functionalized GO and rGO can be used for many solution-processed graphene composites.     

Comparison of the performance of copper oxide and yttrium oxide nanoparticle based hydroxylethyl cellulose electrolytes for supercapacitors

Biodegradable solid polymer electrolyte (SPE) systems composed of hydroxylethyl cellulose blended with copper(II) oxide (CuO) and yttrium(III) oxide (Y₂O₃) nanoparticles as fillers, magnesium trifluoromethane sulfonate salt, and 1‐ethyl‐3‐methylimidazolium trifluoromethane sulfonate ionic liquid were prepared, and the effects of the incorporation of CuO and Y₂O₃ nanoparticles on the performance of the SPEs for electric double‐layer capacitors (EDLCs) were compared. The X‐ray diffraction results reveal that the crystallinity of the SPE complex decreased upon inclusion of the Y₂O₃ nanoparticles compared to CuO nanoparticles; this led to a higher ionic conductivity of the Y₂O₃‐based SPE [(3.08 ± 0.01) × 10^?4 S/cm] as compared to CuO [(2.03 ± 0.01) × 10^?4 S/cm]. The EDLC performances demonstrated that the cell based on CuO nanoparticles had superior performance in terms of the specific capacitance, energy, and power density compared to the Y₂O₃‐nanoparticle‐based cell. However, Y₂O₃‐nanoparticle‐based cell displayed a high cyclic retention (91.32%) compared to the CuO‐nanoparticle‐based cell (80.46%) after 3000 charge–discharge cycles. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134 , 44636.     

Covalently-grafted polyaniline on graphene oxide sheets for high performance electrochemical supercapacitors

A simple route to achieve covalently-grafted polyaniline (PANI)/graphene oxide (GO) nanocomposites has been developed. The synthesized composites showed a uniform hierarchical morphology of the PANI thin film and short rod-like nanostructures that had densely grown on the GO sheets, in contrast to the nonuniform morphology of noncovalently-grafted PANI/GO. Compared to pure PANI and noncovalently-grafted PANI/GO composites, the covalently-grafted PANI/GO composites possessed a much larger specific surface area and pore volume, which increased the accessible surface area for the redox reaction and allowed faster ion diffusion. This unique hierarchical morphology maximized the synergistic effect between PANI and GO, resulting in excellent electrochemical performance (capacitance 442 F/g of PANI/GO (6:1) vs. 226 F/g of pure PANI) and improved cycling stability (83% @ 2000 cycles of PANI/GO (6:1) vs. 54.3% @ 1000 cycles of pure PANI). The enhanced electrochemical performance demonstrates the advantage of the PANI/GO composites prepared via this covalent grafting method.     

Mechanical properties of carbon nanotube paper in ionic liquid and aqueous electrolytes

Porous mats of carbon nanotubes, referred to as bucky paper, are becoming a viable engineering material, especially as electrodes in numerous types of electrochemical cells. The tensile strength of bucky paper was measured in the dry atmospheric condition, and the wet conditions of both water and 1-butyl-3-methyl-imidazolium tetrafluoroborate, an ionic liquid. The two different liquids have a significant impact on the mechanical properties of bucky paper, even when they are not known for readily wetting the nanotubes. It is shown that capillary forces contribute to the mechanical properties of bucky paper. It is also shown that there is a strong interaction between ionic liquid and carbon nanotubes.     

Facile synthesis of reduced graphene oxide/CeO2 nanocomposites and their application in supercapacitors

The combination of the attractive properties of graphene with excellent characteristics of other functional nanomaterials has become a popular pathway for achieving applications in multiple fields. Herein, reduced graphene oxide (RGO)/CeO₂ nanocomposites with enhanced capacitive performance were designed and synthesized by a facile two-step approach with a self-assembly method followed by thermal treatment. The structure, morphology and composition of the resulting RGO/CeO₂ nanocomposites were systematically investigated. The presence of RGO can prevent the aggregation and control the structures of the CeO₂ nanocrystals in the annealing process. The nanocomposites as electrode materials for supercapacitor exhibited an enhanced capacitive performance due to the synergic effect between RGO nanosheets and CeO₂ nanocrystals. The excellent capacitive performance of the RGO/CeO₂ nanocomposites offer great promise for supercapacitor applications.     

Preparation of scale-like nickel cobaltite nanosheets assembled on nitrogen-doped reduced graphene oxide for high-performance supercapacitors

Ultrathin scale-like nickel cobaltite (NiCo₂O₄) nanosheets supported on nitrogen-doped reduced graphene oxide (N-rGO) are successfully synthesized through a facile co-precipitation of Ni²⁺ and Co²⁺ in the presence of sodium citrate and hexamethylenetetramine and subsequent calcination treatment. The composition and morphology of NiCo₂O₄ nanosheets@nitrogen-doped reduced graphene oxide (denoted as NiCo₂O₄ NSs@N-rGO) were characterized by Scanning electron microscope, Transmission electron microscope, X-ray diffraction, Raman spectra, X-ray photoelectron spectroscopy, Brunauer–Emmett–Teller and thermogravimetric analysis. The thickness of NiCo₂O₄ nanosheets anchored on the reduced graphene oxide is around 4 nm. The capacitance of NiCo₂O₄ NSs@N-rGO is evaluated by cyclic voltammogram and galvanostatic charge/discharge with the result that the NiCo₂O₄ NSs@N-rGO could deliver a specific capacitance of 1540 F g⁻¹ after 1000 cycles at 10 A g⁻¹.     

The effect of ionic liquid fragment on the performance of polymer electrolytes

An ionic liquid 1‐methyl‐3‐[2‐(methacryloyloxy)ethyl]imidazolium bis(trifluoromethane sulfonylimide) (MMEIm‐TFSI) was synthesized and polymerized. Composite polymer electrolytes based on polymeric MMEIm‐TFSI (PMMEIm‐TFSI) and poly[(methyl methacrylate)‐co‐(vinyl acetate)] (P(MMA‐VAc)) were prepared, with lithium bis(trifluoromethane sulfonylimide) (LiTFSI) as target ions (Li⁺). DSC/TGA analysis showed good flexibility and thermal stability of the composite electrolyte membranes. The AC impedance showed that the ionic conductivity of the electrolytes increased with PMMEIm‐TFSI up to a maximum value of 1.78 × 10^?4 S cm^?1 when the composition was 25 wt% P(MMA‐VAc)/75 wt% PMMEIm‐TFSI/30 wt% LiTFSI at 30 °C. The composite electrolyte membrane (transmittance ≥ 90%) can also be used as the ion‐conductive layer material for electrochromic devices, and revealed excellent colorization performance. Copyright © 2011 Society of Chemical Industry     

High performance binder-free reduced graphene oxide nanosheets/Cu foam anode for lithium ion battery

Binder-free combination of reduced graphene oxide with Cu foam (RGO/Cu foam) anode for lithium ion battery was designed and achieved via one-step facile electro-reduction. The as-prepared composite RGO/Cu foam anode were studied in terms of scanning electron microscope (SEM), field emission scanning electron microscope (FESEM), transmission electron microscope (TEM), energy dispersive X-ray spectroscopy (EDX) and Fourier transform infrared spectroscopy (FTIR), Raman, galvanostatic charge/discharge, cyclic voltammogram and AC impedance. As expected, graphene oxide nanosheets were indeed successfully electro-reduced to large degree and tightly combined with Cu foam without any additional polymer binder. Moreover, the integrated RGO/Cu foam electrode delivered high reversible capacity of 1196.2 mAh/g at 0.25 A/g, indicating satisfactory electrochemical performances. High Li-storage activity, large surface area, high conductivity of RGO nanosheets and the binder-free combination with porous Cu foam should be jointly responsible for high electrochemical performances.     

Polydopamine-assisted formation of Co3O4-nanocube-anchored reduced graphene oxide composite for high-performance supercapacitors

Tailoring transition-metal oxide nanoparticles with two-dimensional carbon has become a favorite way to improve their electrochemical performance. In this study, a composite of reduced graphene oxide was anchored by Co₃O₄ nanocubes and easily prepared with the assistance of polydopamine (PDA), using a combination of hydrothermal reaction and pyrolysis (Co₃O₄@PDA-rGO). Polydopamine, which possesses abundant catechol and amine groups, could be easily grafted onto graphene oxide to reduce the aggregation of graphene particles. Furthermore, PDA provided active sites, i.e., catechol and amine groups, which coordinated with Co²⁺, enabling enrichment of metal ions on the surface of graphene. After the pyrolysis of Co²⁺-containing PDA-grafted graphene at 400 °C, the Co²⁺ ions were converted into Co₃O₄ nanocubes, while the PDA carbonized to form N-doped porous carbon on the surface of graphene. The resulting product, Co₃O₄@PDA-rGO, demonstrated extraordinary supercapacitive behavior with good cycling stability owing to its unique porous structure as well as the intimate contact between Co₃O₄ and the carbon matrix.     

Fabrication of manganese oxide/three-dimensional reduced graphene oxide composites as the supercapacitors by a reverse microemulsion method

Manganese oxide (MnO₂)/three-dimensional (3D) reduced graphene oxide (RGO) composites were prepared by a reverse microemulsion (water/oil) method. MnO₂ nanoparticles (3–20 nm in diameter) with different morphologies were produced and dispersed homogeneously on the macropore surfaces of the 3D RGO. Scanning electron microscopy and transmission electron microscopy were applied to characterize the microstructure of the composites. The MnO₂/3D RGO composites, which were annealed at 150 °C, displayed a significantly high specific capacitance of 709.8 F g⁻¹ at 0.2 A g⁻¹. After 1000 cycles, the capacitance retention was measured to be 97.6%, which indicates an excellent long-term stability of the MnO₂/3D RGO composites.     

Transformation of hydroquinone to benzoquinone mediated by reduced graphene oxide in aqueous solution

The mediation effect of reduced graphene oxide (rGO) on the oxidative transformation of 1,4-hydroquinone (H₂Q) to 1,4-benzoquinone (BQ) in aqueous solution was investigated using a batch method and electron paramagnetic resonance. The results showed that the autoxidation of H₂Q was spin-restricted and extremely slow in acidic and neutral pH range, but this process can be dramatically accelerated when rGO was added. In the presence of 33.3 mg L⁻¹ rGO, more than 76.0% of H₂Q was oxidized to BQ within 36 h. The enhancement effects of rGO were attributed to the combined contribution of the high chemical reactivity of graphenic edges and defects on rGO and the high electron conductivity of graphene basal surface of rGO. It is proposed that dissolved oxygen reacted with graphenic edges and defects of rGO to produce surface-bound oxygen intermediates, which capture H atoms from the phenolic hydroxyl groups of H₂Q and facilitate the generation of semiquinone radical (SQ⁻). The generated SQ⁻ continued to transfer an electron to molecular oxygen to yield superoxide radical (O₂⁻) and BQ. As a chain-carrying radical, O₂⁻ further reacted with H₂Q to produce SQ⁻ and H₂O₂.     

Catalytic performance of Pt nanoparticles on reduced graphene oxide for methanol electro-oxidation

We have investigated a simple approach for the deposition of platinum (Pt) nanoparticles onto surfaces of graphite oxide (GO) nanosheets with particle size in the range of 1-5 nm by ethylene glycol reduction. During Pt deposition, a majority of oxygenated functional groups on GO was removed, which resulted in a Pt/chemically converted graphene (Pt/CCG) hybrid. The electrochemically active surface areas of Pt/CCG and a comparative sample of Pt/multi-walled carbon nanotubes (Pt/MWCNT) are 36.27 and 33.43 m²/g, respectively. The Pt/CCG hybrid shows better tolerance to CO for electro-oxidation of methanol compared to the Pt/MWCNT catalyst. Our study demonstrates that CCG can be an alternative two-dimensional support for Pt in direct methanol fuel cells.     

Scalable preparation of three-dimensional porous structures of reduced graphene oxide/cellulose composites and their application in supercapacitors

Controlling the assembled structures of graphene has recently attracted enormous attention due to intriguing properties of the resultant structures. In this study, three-dimensional (3D) porous structures of reduced graphene oxide (RGO) with various ratios of RGO to cellulose have been fabricated by a scalable, but simple and efficient, approach that consists of ball milling assisted chemical reduction of GO, template shaping, coagulating, and lyophilization. The efficient mechanical shearing of ball milling and the hydrogen bond interactions between RGO and cellulose molecules contribute to the formation of a homogeneous RGO/cellulose hydrogel, improved thermal stability of the resultant composites, and enhanced crystallinity of the cellulose in the composites. The coagulation effect of cellulose maintains the RGO sheets in the 3D structures of cellulose; on the other hand, the RGO sheets facilitate the preservation of the 3D structures during freeze-drying, leading to the formation of 3D porous structures of RGO/cellulose composites. Benefiting from the continuous RGO network in the composites, the 3D porous structures of RGO(70)/cellulose(100) (GO:cellulose = 70:100 in weight) show an electrical conductivity of 15.28 S m⁻¹. Moreover, the 3D porous structures show potential application in supercapacitors due to the fact that they provide high specific surface area and fast charge propagation.