钛酸丁酯/负载钛体系催化异戊二烯聚合

以钛酸丁酯[Ti(C_4H_9O)_4] 和TiCl_4/MgCl2(简称Ti)为主催化剂、三异丁基铝(简称Al)为助催化剂催化异戊二烯 (Ip)聚合,考察了Ti(C4H9O)4和Al用量对聚合物在汽油中可溶性及单体转化率、催化效率(CE)的影响,并对聚合物进行了表征.结果表明,当Ti/Ip(摩尔比)一定时,聚合物在汽油中的溶解度随着Ti(C_4H_9O)_4/Ip(摩尔比)的增加而增大,Ti(C_4H_9O)_4/Ip为3×10~(-3)时,单体转化率达到最大值;当主催化剂配比及用量一定时,聚合物在汽油中的溶解度随着Al/Ti(C_4H_9O)_4(摩尔比)的增加先增大后减小,当 Al/Ti(C_4H_9O)_4为10～15时,单体转化率和CE存在最大值;该催化体系制得的聚异戊二烯以反式-1,4-结构为主,同时包含一定量的3,4-和1,2-结构.     

用钼系催化体系催化异戊二烯聚合

研究了以增溶剂增溶的五氯化钼(简称Mo)为主催化剂、间甲酚取代的三异丁基铝(简称Al)为助催化剂的催化体系引发异戊二烯聚合的规律,考察了以辛醇、磷酸三丁酯和辛醇与磷酸三丁酯混合物作为增溶剂对催化活性的影响,探讨了在以辛醇为增溶剂的催化体系下,Al与Mo摩尔比、Mo与异戊二烯摩尔比及反应时间等对单体转化率和聚合物特性黏数...     

二(2-乙基己基)磷酸酯为配体的钼系催化体系催化异戊二烯聚合(英文)

研究了二(2-乙基己基)磷酸酯(简称P)配体对二氯二氧钼/烷基铝(简称Mo/Al)催化体系催化异戊二烯(Ip)聚合规律的影响,考察了P/Mo(摩尔比)对单体转化率的影响,并测定了产物的相对分子质量及其分布,表征了其微观结构。结果表明,在P/Mo为5时催化体系的催化活性最高,单体转化率可达80%以上。在最佳聚合条件,即Al/Mo(摩尔比)为10、Mo/Ip(摩尔比)为4×10-4时,聚异戊二烯(PI)数均分子量为1.29×105,分子量分布指数为3.87,PI的1,4-、1,2-和3,4-结构的摩尔分数分别为54.2%、21.0%和24.8%。     

钴系催化剂催化异戊二烯的本体聚合

以环烷酸钴(简称Co)-三异丁基铝(简称Al)-CS2为催化剂引发异戊二烯(Ip)本体聚合合成了聚异戊二烯(PI),考察了单体转化率、催化剂效率(CE)和聚合物特性黏数([η])的影响因素,并对PI的微观结构和玻璃化转变温度(Tg)进行了表征。结果表明,在Co/Ip(摩尔比)为4.0×10-4、Al/Co(摩尔比)为60、CS2/Co(摩尔比)为15、反应温度为50℃下聚合48 h所得PI中1,4-结构、3,4-结构、1,2-结构质量分数分别为18.6%,41.2%,40.2%,Tg为-6.5℃;反应温度对PI的[η]影响最大,随着反应温度的升高,[η]呈下降趋势,且均小于1 dL/g;其他聚合条件的变化对PI的[η]影响不大。     

钼系催化剂催化异戊二烯聚合研究

以磷酸三丁酯取代的五氯化钼(简称Mo)及间甲酚取代的三异丁基铝(简称Al)为催化剂引发异戊二烯(Ip)聚合,考察了n(Mo):n(Ip)、n(Al):n(Mo)及聚合温度对单体转化率和催化剂效率的影响。采用FTIR和1H-NMR对聚合产物的微观结构进行测试表征,用DSC测定聚合产物的玻璃化转变温度(Tg);结果表明在反应温度为50℃、n(Mo):n(Ip)为4.0×10-4、n(Al):n(Mo)为30、聚合24h所得的聚异戊二烯(PIp)中1,4-结构摩尔分数为55.7%,3,4-结构的为22.5%和1,2-结构的为21.8%,该PIp的Tg为-35.1℃。     

负载钛-三乙基铝体系催化异戊二烯聚合

以负载钛(TiCl4/MgCl2)为主催化剂、三乙基铝为助催化剂催化异戊二烯聚合,研究了n(Ti)/n(Ip)、n(Al)/n(Ti)及温度等对单体转化率和催化效率的影响。采用FTIR和1H-NMR对聚合产物的微观结构进行测试表征,DSC测定聚合产物的熔点和结晶度。结果表明,所得聚合产物为反式-1,4-结构摩尔分数达98%的异戊橡胶;聚合体系的单体转化率随n(Ti)/n(Ip)的增大而升高,催化效率则先升高后降低;随n(Al)/n(Ti)和聚合温度的增大,催化效率和单体转化率均先升高后降低,最佳n(Al)/n(Ti)值为110~120,最佳聚合温度为20~25℃。     

二乙二醇单乙醚基钡/三异丁基铝/正丁基锂引发体系合成高反式苯乙烯-异戊二烯-丁二二烯三元共聚物

以二乙二醇单乙醚基钡(简称Ba)/三异丁基铝(简称Al)/正丁基锂(简称Li)为三元引发体系,采用负离子聚合法合成了高反式苯乙烯-异戊二烯(Ip)-丁二烯(Bd)三元共聚物(SIBR),考察了引发剂组分、单体配比和聚合温度对SIBR微观结构的影响,并研究了Al/Li(摩尔比)和Bd/Ip(质量比)对SIBR结晶行为的影...     

异辛酸铁/三异丁基铝/亚磷酸二乙酯催化丁二烯-异戊二烯共聚合

以异辛酸铁(简称Fe)/三异丁基铝(简称Al)/亚磷酸二乙酯(DEP)为催化剂催化丁二烯(Bd)与异戊二烯(Ip)共聚,考察了Al用量、DEP用量及单体配比对Bd-Ip共聚合的影响。结果表明,由Fe/Al/DEP组成的催化剂可在己烷中于50℃下催化Bd与Ip共聚,共聚物收率随Al和DEP用量的增加后下降。当Al/Fe(摩尔比)为10、DEP/Fe(摩尔比)为2时,共聚物收率最高为82.9%。当Al/Fe较低时,共聚物仅有1个玻璃化转变温度,为无规共聚物。     

酸性膦酸酯钕盐催化丁二烯在苯乙烯溶剂中的选择性聚合

以酸性膦酸酯钕盐Nd(P507)3(简称Nd)、氢化二异丁基铝(简称Al)和倍半乙基铝(简称Cl)为催化剂体系,研究了丁二烯在苯乙烯溶剂中的选择性聚合,考察了溶剂种类、Al/Nd、Cl/Nd及温度对聚合的影响。结果表明,该催化剂体系可在苯乙烯溶剂中实现丁二烯的选择性聚合,在Al/Nd(摩尔比)为10、Cl/Nd(摩尔比)为2.0及聚合温度为50℃的条件下,丁二烯的转化率可达90%以上;聚合物中苯乙烯链节的摩尔分数在4%以下,丁二烯链节的顺式-1,4-结构摩尔分数为90%左右,1,2-结构摩尔分数为4%左右。     

低温预制钛系催化剂合成cis-1,4-聚异戊二烯

采用Ziegler-Natta配位聚合制备了高顺式聚异戊二烯,主要考察了非均相催化体系四氯化钛-三异丁基铝二组分催化剂的预制方法以及催化剂预制条件对异戊二烯体系聚合规律的影响。讨论了催化剂配比、预制催化剂温度和陈化温度对催化剂活性及聚合物的凝胶含量、特征黏度、微观结构含量等方面的影响。同时讨论了催化剂用量、聚合温度和聚合时间对聚合活性及聚合物的凝胶含量、特征黏度、微观含量等方面的影响。研究结果表明,合成高cis-1,4-聚异戊二烯的最佳实验条件为:Al/Ti摩尔比1.0,催化剂预制温度-40℃,陈化2 h,Ti/Ip摩尔比6×10^-3,聚合温度50℃,聚合时间5 h。所得聚合物最高转化率为87.1%,cis-1,4结构含量为91.76%。     

Insect antifeedant properties of anthranoids from the genusVismia

Vismiones and ferruginins, representatives of a new class of lypophilic anthranoids from the genusVismia were found to inhibit feeding in larvae of species ofSpodoptera, Heliothis, and inLocusta migratoria.     

Direct observation of freeze-thaw instability of latex coatings via high pressure freezing and cryogenic SEM

Despite its industrial importance, the subject of freeze-thaw (F/T) stability of latex coatings has not been studied extensively. There is also a lack of fundamental understanding about the process and the mechanisms through which a coating becomes destabilized. High pressure (2100 bar) freezing fixes the state of water-suspended particles of polymer binder and inorganic pigments without the growth of ice crystals during freezing that produce artifacts in direct imaging scanning electron microscopy (SEM) of fracture surfaces of frozen coatings. We show that by incorporating copolymerizable functional monomers, it is possible to achieve F/T stability in polymer latexes and in low-VOC paints, as judged by the microstructures revealed by the cryogenic SEM technique. Particle coalescence as well as pigment segregation in F/T unstable systems are visualized. In order to achieve F/T stability in paints, latex particles must not flocculate and should provide protection to inorganic pigment and extender particles. Because of the unique capabilities of the cryogenic SEM, we are able to separate the effects of freezing and thawing, and study the influence of the rate of freezing and thawing on F/T stability. Destabilization can be caused by either freezing or thawing. A slow freezing process is more detrimental to F/T stability than a fast freezing process; the latter actually preserves suspension stability during freezing. Presented at the 82nd Annual Meeting of the Federation of Societies for Coatings Technology, October 27–29, 2004 in Chicago, IL. Tied for first place in The John A. Gordon Best Paper Competition.     

Ethanol and (−)-α-Pinene: Attractant Kairomones for Bark and Ambrosia Beetles in the Southeastern US

In 2002–2004, we examined the flight responses of 49 species of native and exotic bark and ambrosia beetles (Coleoptera: Scolytidae and Platypodidae) to traps baited with ethanol and/or (−)-α-pinene in the southeastern US. Eight field trials were conducted in mature pine stands in Alabama, Florida, Georgia, North Carolina, and South Carolina. Funnel traps baited with ethanol lures (release rate, about 0.6 g/day at 25–28°C) were attractive to ten species of ambrosia beetles (Ambrosiodmus tachygraphus, Anisandrus sayi, Dryoxylon onoharaensum, Monarthrum mali, Xyleborinus saxesenii, Xyleborus affinis, Xyleborus ferrugineus, Xylosandrus compactus, Xylosandrus crassiusculus, and Xylosandrus germanus) and two species of bark beetles (Cryptocarenus heveae and Hypothenemus sp.). Traps baited with (−)-α-pinene lures (release rate, 2–6 g/day at 25–28°C) were attractive to five bark beetle species (Dendroctonus terebrans, Hylastes porculus, Hylastes salebrosus, Hylastes tenuis, and Ips grandicollis) and one platypodid ambrosia beetle species (Myoplatypus flavicornis). Ethanol enhanced responses of some species (Xyleborus pubescens, H. porculus, H. salebrosus, H. tenuis, and Pityophthorus cariniceps) to traps baited with (−)-α-pinene in some locations. (−)-α-Pinene interrupted the response of some ambrosia beetle species to traps baited with ethanol, but only the response of D. onoharaensum was interrupted consistently at most locations. Of 23 species of ambrosia beetles captured in our field trials, nine were exotic and accounted for 70–97% of total catches of ambrosia beetles. Our results provide support for the continued use of separate traps baited with ethanol alone and ethanol with (−)-α-pinene to detect and monitor common bark and ambrosia beetles from the southeastern region of the US.     

Methyl 2,4,6-decatrienoates Attract Stink Bugs and Tachinid Parasitoids

Halyomorpha halys (Stål) (Pentatomidae), called the brown marmorated stink bug (BMSB), is a newly invasive species in the eastern USA that is rapidly spreading from the original point of establishment in Allentown, PA. In its native range, the BMSB is reportedly attracted to methyl (E,E,Z)-2,4,6-decatrienoate, the male-produced pheromone of another pentatomid common in eastern Asia, Plautia stali Scott. In North America, Thyanta spp. are the only pentatomids known to produce methyl 2,4,6-decatrienoate [the (E,Z,Z)-isomer] as part of their pheromones. Methyl 2,4,6-decatrienoates were field-tested in Maryland to monitor the spread of the BMSB and to explore the possibility that Thyanta spp. are an alternate host for parasitic tachinid flies that use stink bug pheromones as host-finding kairomones. Here we report the first captures of adult and nymph BMSBs in traps baited with methyl (E,E,Z)-2,4,6-decatrienoate in central Maryland and present data verifying that the tachinid, Euclytia flava (Townsend), exploits methyl (E,Z,Z)-2,4,6-decatrienoate as a kairomone. We also report the unexpected finding that various isomers of methyl 2,4,6-decatrienoate attract Acrosternum hilare (Say), although this bug apparently does not produce methyl decatrienoates. Other stink bugs and tachinids native to North America were also attracted to methyl 2,4,6-decatrienoates. These data indicate there are Heteroptera in North America in addition to Thyanta spp. that probably use methyl 2,4,6-decatrienoates as pheromones. The evidence that some pentatomids exploit the pheromones of other true bugs as kairomones to find food or to congregate as a passive defense against tachinid parasitism is discussed.     

2007～2008年世界塑料工业进展

收集了2007年7月～2008年6月世界塑料工业的相关资料,介绍了2007～2008年国外塑料工业的发展情况,提供了世界塑料产量、消费量及全球各类树脂的需求量及产能情况.按通用热塑性树脂(聚乙烯、聚丙烯、聚苯乙烯、聚氯乙烯、ABS树脂)、工程塑料(尼龙、聚碳酸酯、聚甲醛、热塑性聚酯、聚苯醚)、特种工程塑料(聚苯·硫醚、液晶聚合物、聚醚醚酮)、通用热固性树脂(酚醛、聚氨酯、不饱和聚酯树脂、环氧树脂)不同品种的顺序,对树脂的产量、消费量、供需状况及合成工艺、产品应用开发、树脂品种的延伸及应用的进一步扩展等技术作了详细介绍.     

2005～2006年国外塑料工业进展

收集了2005年7月～2006年6月国外塑料工业的相关资料,介绍了2005—2006年国外塑料工业的发展情况。提供了世界塑料产量、消费量及全球各类树脂生产量以及各国塑料制品的进出口情况。作为对比,介绍了中国塑料的生产情况。按通用热塑性树脂（聚乙烯、聚丙烯、聚苯乙烯、聚氯乙烯、ABS树脂）、工程塑料（聚酰胺、聚碳酸酯、聚甲醛、热塑性聚酯、聚苯醚）、通用热固性树脂（酚醛、聚氨酯、不饱和树脂、环氧树脂）、特种工程塑料（聚苯硫醚、液晶聚合物、聚醚醚酮）的品种顺序,对树脂的产量、消费量、供需状况及合成工艺、产品开发、树脂品种的延伸及应用的扩展作了详细的介绍。