Effects of crystallinity and supermolecular formations on the interfacial shear strength and adhesion in GF/PP composites

Aim of this study was to screen the morphological effects on the interfacial shear strength (i) in glass fibre (GF) reinforced isotactic polypropylene (iPP) model composites. i was determined by a modified single fibre pull-out technique. It was established that the relation between i (5–6 MPa) and the yield stress of the iPP (y30 MPa) is at about 1:6 and that the i values were not influenced by the mophological superstructure set under isothermal crystallization conditions. Increased i was only observed when specimens were produced non-isothermally, by quenching (i9 MPa). This improvement could not be related to thermal shrinkage stresses. The enhancement in i was attributed to better wetting and improved adhesion due to the enlarged amorphous PP (aPP)-phase. A schematic adhesion model considering the wetting behaviour of aPP and iPP was proposed.     

Cooperative inclusion of sodium 1-pyrenesulfonate by γ-cyclodextrin

Summary The interaction of -cyclodextrin(-CD) with sodium 1-pyrenesulfonate(PS) was studied spectrophotometrically. -CD was found to cause much larger decrease in the absorption maxima of PS than -CD. The fluorescence spectra of PS in the presence of -CD showed excimer emission, while those of PS with -CD showed only monomer emission, indicating that -CD forms 12 (-CDPS) complexes in which two PS molecules are included in the -CD cavity in a face-to-face fashion. The binding isotherm showed a sigmoidal curve. The association constants were estimated by computer simulation of the binding curve. The 12 (CDPS) complex was found to be much more stable (K=10⁶ M^–1) than the 11 complex (K=1 M^–1). At high concentration of -CD another -CD cooperates in binding two PS molecules, resulting in the formation of a 22 complex.     

Sex pheromone components of corn stalk borerSesamia nonagriodes (Lef.) isolation,identification, and field tests

Z-11-Hexadecenyl acetate (Z11–16OAc), dodecyl acetate (12OAc),Z-11-hexadecenal (Z11–16Aid), andZ-11-hexadecenol (Z11– 16OH), were found in pheromone gland extracts of femaleSesamia nonagriodes (Lef.) [Lepidoptera: Noctuidae]. These four components were also present in airborne volatiles collected from calling virgin females in a 651889 ratio. Hexadecyl acetate (16OAc) was also detected but found to be inactive. The identification was based on multicolumn GC analysis, mass spectrometry, and field activity.Z11–16OAc is the major sex pheromone component; the addition of the secondary components individually decreased male captures. The blend of the four synthetic components in 691588 ratio was highly attractive to males; 200 g per trap was the most effective concentration in field tests.Lepidoptera: Noctuidae     

Synthesis of monocarboxylic polyoxyethylenes

Summary The various methods of synthesis which can be used to prepare -carboxy polyoxyethylenes are reviewed. The synthesis and the purification of -methoxy -carboxy polyoxyethylenes ( ) are reported. The process consists of the reaction of halogenoacetic acids with an -methoxy -sodium hydroxylate polyoxyethylene followed by a purification by extraction. ,-dimethoxy and -methoxy -ethyl carboxylate polyoxyethylenes were synthesized.     

Electrochemistry of anodic F2 evolution at carbon electrodes: Bubble adherence effects in the kinetics at rotating cone electrodes

Fluorine-evolving carbon anodes exhibit unusually high overvoltages characterized also by remarkably large Tafel slopes having values 0.4–0.8 V per decade of current density change. Also, at high current densities, a so-called anode effect associated with a type of passivation sets in. Experiments are described which aim to distinguish high polarization arising from an intrinsically large Tafel slope, generated by a non-ohmic charge transfer barrier layer effect due to CF film formation, from effects due to difficulties of F₂ bubble detechment and F₂ gas film formation at the CF film. Steady state polarization measurements have been made at a rotating carbon cone electrode from which F₂ bubbles, which otherwise remain attached to the electrode and block access to the electrolyte, can be spun away. At the rotated electrode, at low and intermediate current densities, linear Tafel behaviour is still observed but with high slopes associated with the barrier layer film effect. At higher current densities an anode effect, associated with the F₂ gas film, is developed, leading to a type of passivation of the electrode. The two sources of unusually high polarization in the F₂ evolution reaction at carbon are not independent as it is also the formation of the CF film that causes difficulties in gas bubble detachment owing to the lyophobic properties of the fluorinated C/F₂/KF·2HF interface. Polishing effects confirm this conclusion.     

Response of two okra (Abelmoschus esculentus L. Moench) varieties to fertilizers: Yield and yield components as influenced by nitrogen and phosphorus application

The response of two okra (Abelmoschus esculentus L. Moench) varieties (White velvet and NHAE 47-4) to fertilization in northern Nigeria was examined using four rates of nitrogen (0, 25, 50 and 100 kg ha^–1) and three rates of phosphorus (0, 13 and 26 kg ha^–1). Nitrogen application significantly increased green pod yield, pod diameter, number of fruits per plant, number of seeds per pod and pod weight. Application of phosphorus also significantly increased green pod yield, pod number and number of seeds per pod. The two varieties responded to nitrogen application differentially with respect to green pod yield. For optimum green pod yield of White velvet 35 kg N ha^–1 is suggested while for variety NHAE 47-4, N fertilization can be increased to 70 kg ha^–1. There was no differential response of varieties to phosphorus fertilization for green pod yield; however, the application of 13 kg ha^–1 enhanced the performance of both varieties.     

Effect of the type of mullite and certain additives on the sintering process of mullite-zircon specimens

Conclusions The effect of the type of mullite on the sintering process of mullite-zircon specimens was studied. It was shown that using electromelted mullite as chamotte ensures optimum properties. Sintered mullite increases the porosity of the products.The optimum content of the argillaceous binder for obtaining dense and strong specimens was found to be 10%.It was shown that highly refractory oxides intensify (activate) the sintering process of the mullite-zircon products obtained using electromelted mullite and strengthen them to the maximum extent. In this case, their thermal shock resistance remains quite high.The salts of REE have a positive effect on the sintering process of the mullite-zircon specimens at 1650°C and improve their strength; however, in this case, their thermal shock resistance decreases abruptly. The oxides of REE lead to less intense sintering of the mullite-zircon specimens but these additives increase their strength significantly and impart the required thermal shock resistance.The sintering process of the mullite-zircon specimens occurs in the presence of a liquid phase and is accomplished in three stages whose kinetics can be described by the relationships (proportionalities)l/l^1,3, l/l^1/2, and l/l^1/3, respectively.Translated from Ogneupory, No. 8, pp. 12–17, August, 1988.     

Two-variable periodic perturbation of kinetic oscillations

Using one of the generic models (CO oxidation on Pt with surface-oxide formation) predicting kinetic oscillations in heterogeneous catalytic reactions, we show that the efficiency of two-variable periodic perturbations with respect to converting natural period-1 oscillations to period-l oscillations at the forcing frequency is remarkably sensitive to the kind of perturbations used. Counter-phase perturbations are much more effective compared to in-phase perturbations. The physics underlying these findings is suggestive of their applicability to many other models and/or real systems exhibiting kinetic oscillations.     

Macropore Formation on p-Type Silicon

Electrochemical anodisation of p-silicon of different crystal orientations and doping densities has been investigated in acetonitrile, propylene carbonate and dimethylformamide solutions containing hydrofluoric acid. The formation of a macroporous layer in acetonitrile and propylene carbonate is observed only if the resistivity of the silicon exceeds 10 ·cm for both (1 0 0) and (1 1 1) crystal orientations whereas in dimethylformamide the macroporous layer can be formed on 1 ·cm substrates. The influence of water concentration in the electrolyte on the morphology of the macroporous layer has also been studied. The resistivity of the used electrolyte solutions was measured and compared to that of silicon. Formation of a macroporous layer is explained by the effective collection of holes at the tip of the growing macropores.     

Synthesis, Characterization and Optimum Reaction Conditions of Oligo-N, N′-bis (2-hydroxy-1-naphthalidene) Thiosemicarbazone

The oxidative polycondenzation reaction conditions of N, N-bis (2-hydroxy-1-naphthalidene) thiosemicarbazone (HNTSC) using air oxygen, H₂O₂ and NaOCl were studied in an aqueous alkaline medium between 50–90°C. Oligo-N, N-bis (2-hydroxy-1-naphthalidene) thiosemicarbazone was characterized by ¹H-NMR, FT-IR, UV-Vis, size exclusion chromatography (SEC) and elemental analysis techniques. Solubility testing of oligomer was investigated using organic solvents such as DMF, THF, DMSO, methanol, ethanol, CHCl₃, CCl₄, toluene acetonitrile, ethyl acetate, concentrated H₂SO₄ and an aqueous alkaline solution. Using NaOCl, H₂O₂ and air O₂ oxidants, conversion to oligo-N, N-bis (2-hydroxy-1-naphthalidene) thiosemicarbazone (OHNTSC) of N, N-bis (2-hydroxy-1-naphthalidene) thiosemicarbazone was found to be 85, 80 and 76%, respectively, in an aqueous alkaline medium. According to the SEC analyses, the number-average molecular weight, weight-average molecular weight and polydispersity index values of OHNTSC synthesized were found to be 1050 gmol^–1 1715 gmol^–1 and 1.63, using NaOCl, and 2137, 2957 gmol^–1 and 1.38, using air O₂ and 2155 gmol^–1 4164 gmol^–1 and 1.93, using air H₂O₂, respectively. Also, TG analysis was shown to be unstable of oligo-N, N-bis (2-hydroxy-1-naphthalidene) thiosemicarbazone against thermo-oxidative decomposition. The weight loss of OHNTSC was found to be 97.29% at 900°C.     

Properties ofSrMO 3-δ(M=Fe,Co) as oxygen electrodes in alkaline solution

Strontium ferrates and cobaltates with compositions SrFeO_3- (0.060.40) and SrCoO_3- (0.040.30) were synthesized. The dependence of the oxygen electrode properties on the value was examined in 1 mol dm^–3 KOH solution. In the SrFeO_3- series, the samples with 0.24<<0.29, showed the highest activity in both oxygen evolution and reduction reactions. In contrast, no strong dependence on the value was observed in SrCoO_3-, which also showed a high catalytic activity for oxygen evolution.     

Chemical effects in commercial and laboratory mixtures of ‘reactive’ phosphate rock and acidulated fertilisers

The chemical analyses of different size fractions of a variety of commerical and laboratory prepared samples of partially acidulated phophate rocks and mixtures of reactive phosphate rock and single superphosphate (called LONGLIFE in New Zealand) have been studied. Whereas only minor chemical segregation effects have been observed for partially acidulated products quite a large bias has been established for LONGLIFE materials, and more especially commercial samples, where larger proportions of phosphate rock were found in the lower size fractions. This inhomogeneity was considered to arise from poor mixing of components and subsequent inconsistent granulation; more stringent rejection criteria for undersize material would greatly assist in improving the product quality. Chemical deactivation of the phosphate rock residue in LONGLIFE materials was also observed; this can be partially explained by a selective reaction of the reactive phosphate rock component with acid still present at the time of mixing with the single superphosphate component.     

Physicochemical properties of electrodepositedβ-lead dioxide: Effect of deposition current density

The influence of current density on the coulometric efficiency of -PbO₂ deposition in 0.5 M cM lead nitrate, the nonstoichiometry, impurity of -PbO₂ and voltammetric double layer capacitance have been studied. While the coulometric efficiency is about 95% at current densities less than 30 mA cm^–2, it decreases at higher current densities. The oxygen deficiency, , in -PbO_2- has been found to be invariant with the current density. X-ray diffraction studies provide a linear decrease in the weight percent of -PbO₂ as an impurity in the -PbO₂ with increase in current density, and the -PbO₂ is found to be absent at 100mA cm^–2 or higher. The estimated double layer capacitance from the cyclic voltammograms recorded in the potential range 0.70–1.10V, increases with deposition current density, indicating enhanced surface area.     

Relationship between preferential adsorption coefficient and intrinsic viscosity in ternary systems

Summary The relation proposed between the preferential adsorption coefficient, , and the intrinsic viscosity, ¦¦ ¦¦=¦¦+AK has been applied in this paper to previously published data. This equation is found to be valid in theta condi tions and far away from them. The obtained results are compared to the ones calculated with the Dondos-Benoit equation.     

Lean NOx catalysis over alumina‐supported catalysts

aluminasupported catalysts show promise as lean NO_x catalysts. The role of alumina in influencing the structural and chemical properties of the active phase supported on it is discussed using some effective aluminabased lean NO_x catalysts. These include Ag/Al₂O₃, CoO_x/Al₂O₃ and SnO₂/Al₂O₃. Alumina plays an important role in stabilizing Ag in the oxidic phase and cobalt in the 2+ oxidation state. For SnO₂/Al₂O₃, alumina increases the SnO₂ surface area. On both Ag/Al₂O₃ and SnO₂/Al₂O₃, alumina also participates actively in the NO_x reduction reaction. An active organic intermediate is formed on Ag or Sn oxide which reacts with NO_x subsequently on alumina to form N₂.     

Emissivity of carbon disulfide explosive combustion products

Conclusions Anomalous values occur in the emissivity of explosion products of carbon disulfide-oxygen mixtures at relatively low pressures also (p₀=0.03 atm). While within the spectral range of SO+OSO₂+h recombination radiation (280–370 nm), in accordance with the results of [2, 3] the value exceeds unity, on the wings of the radiation band ()1.If nitrogen oxide is employed as an oxidizer instead of oxygen, the limiting emissivity becomes anomalously high in the spectral range of the chemiluminescent reaction NO+ONO₂+h.It is proposed that at low CS₂/O₂ mixture pressure the radiation spectrum wings are connected with electron energy levels of SO₂ molecules populated by the mechanisms of thermal multistep activation, due to which their density is less than the thermodynamic equilibrium value.Chernogolovka. Translated from Fizika Goreniya i Vzryva, No. 5, pp. 108–114, September–October, 1978.     

Synthesis of new metal-containing side-chain monomers and polymers

New metal-containing vinyl monomers, hexyl-6-oxy-{4-[4-(4-carboxy cyclopentadienyl manganese tricarbonyl phenyl)phenyl]benzoyloxy}methacrylate and hexyl-6-oxy-{4-[4-(4-ferrocenoyl phenyl)phenyl]benzoyloxy}methacrylate, and the corresponding homopolymers and random copolymers with hydroxy monomer hexyl-6-oxy-{4-[4-(4-hydroxyphenyl)phenyl]benzoyloxy}methacrylate were synthesized. The compounds were characterized by¹H NMR; their thermal behavior was investigated by means of differential scanning calorimetry. Monomers and polymers containing the ferrocene unit melt at lower temperatures than those derived from the cyclopentadienyl managanese tricarbonyl moiety. The melting temperatures of the monomers and polymers ranged from 399 to about 515 K, Both monomers and polymers failed to exhibit mesogenic behavior. Values ofM _n,M _w,M _w/M _n, and degree of polymerization were obtained by gel permeation chromatography. TheM _n ranged from 16,500 for the copolymer containing hexyl-6-oxy-{4-[4-(4-ferrocenoyl phenyl)phenyl] benzoyloxy}methacrylate and hydroxy monomer hexyl-6-oxy-{4-[4-(4-hydroxyphenyl)phenyl]benzoyloxy}methacrylate at a 1:3 ratio to 26,000 for the copolymer containing hexyl-6-oxy-{4-[4-(4-carboxy cyclopentadienyl manganese tricarbonyl phenyl)phenyl]benzoyloxy}methacrylate and hydroxy monomer hexyl-6-oxy-{4-[4-(4-hydroxyphenyl)phenyl]benzoyloxy}methacrylate at a 1:3 ratio.M _w/M _n ranged from 1.6 in the case of the copolymer containing hexyl-6-oxy-{4-[4-(4-carboxy cyclopentadienyl manganese tricarbonyl phenyl)phenyl]benzoyloxy}methacrylate and hydroxy monomer hexyl-6-oxy-{4-[4-(4-hydroxyphenyl)phenyl]benzoyloxy}methacrylate at a 1:3 ratio to 2.2 in the case of poly(hexyl-6-oxy{4-[4-(4-carboxy cyclopentadienyl manganese tricarbonyl phenyl)phenyl]benzoyloxy}methacrylate).     

Improvement of Catalytic Performance in Isobutane Oxidation to Methacrylic Acid of Keggin-Type Phosphomolybdates by Preparation via Lacunary Precursors: Nature of the Active Sites

A solvent-free method of preparation of a vanadium(V) phosphate is described and discussed. Reaction of V₂O₅ with H₃PO₄ in the absence of water at 150°C leads to the formation of a new catalytic material that is designated as anhydrous VOPO₄. The material readily hydrates to form VOPO₄2H₂O and has been characterised using powder X-ray diffraction, in situ Raman spectroscopy and ³¹P MAS NMR spectrometry. On activation in dry N₂ followed by reaction with butane/air another novel material is formed that has an intrinsic activity for maleic anhydride that is similar to catalysts derived from VOHPO₄0.5H₂O under comparable conditions. Activation of VOPO₄2H₂O under comparable conditions leads to the formation of _I-VOPO₄ which exhibits no partial oxidation activity. Reaction of anhydrous VOPO₄ with alcohols leads to the exclusive formation of VO(H₂PO₄)₂ in further contrast to VOPO₄2H₂O which under similar conditions leads to the synthesis of VOHPO₄0.5H₂O.     

An investigation of the interaction of potassium ions with poly(dimethylsiloxane)

The interactions of potassium ions with , -hydroxy-terminated and , -trimethylsilyl-terminated poly(dimethylsiloxanes) (PDMS) have been investigated. After mixing with potassium hydroxide followed by partial extraction, the , -hydroxy-terminated PDMS samples gave elastomeric materials which are thought to result from aggregation of terminal potassium silanolate ion pairs. Uniaxial tensile testing of these materials was carried out at 298 K. The , -trimethylsilyl-terminated PDMS, when mixed with potassium hydroxide, however, gave completely soluble material following identical solvent extraction procedures.     

Comportement électrochimique des variétés alpha et beta PbO2 et influence de l'antimoine sur leur reactivité électrochimique en milieu H2SO4, 8N

Résumé L'expérience a montré qu'il est possible d'obtenir par l'oxydation anodique des variétés- et-PbO₂ parfaitement pures au point de vue cristallographique, et que la réduction de-PbO₂ se déroule à un potentiel plus élevé et plus constant que celui observé sur-PbO₂. La réactivité électrochimique de-PbO₂ est plus importante que celle de-PbO₂. L'introduction de Sb dans les réseaux cristallins de ces variétés diminue fortement leur cristallinité et dans le cas de-PbO₂ on obtient toujours simultanément- et-PbO₂. Du point de vue réactivité électrochimique, l'accroissement dû à la présence de Sb est de l'ordre de 33%.

---

The results demonstrate the possibility of preparing through anodic oxidation rigorously pure, from the crystallographic point view,- and-PbO₂ phases, and that the reduction of-PbO₂ takes place at a potential which is more positive and more constant than the one obtained with-PbO₂. In a battery, the electrochemical reactivity of-PbO₂ is more important. The introduction of Sb into the lattice of these forms of PbO₂ decreases their crystallinity, and for the case of-PbO₂ we obtained simultaneously- and-PbO₂. Their electrochemical reactivity can increase by about 33%.