Spatiotemporal blind source separation approach to atrial activity estimation in atrial tachyarrhythmias

The analysis and characterization of atrial tachyarrhythmias requires, in a previous step, the extraction of the atrial activity (AA) free from ventricular activity and other artefacts. This contribution adopts the blind source separation (BSS) approach to AA estimation from multilead electrocardiograms (ECGs). Previously proposed BSS methods for AA extraction-e.g., independent component analysis (ICA)-exploit only the spatial diversity introduced by the multiple spatially-separated electrodes. However, AA typically shows certain degree of temporal correlation, with a narrowband spectrum featuring a main frequency peak around 3.5-9 Hz. Taking advantage of this observation, we put forward a novel two-step BSS-based technique which exploits both spatial and temporal information contained in the recorded ECG signals. The spatiotemporal BSS algorithm is validated on simulated and real ECGs from a significant number of atrial fibrillation (AF) and atrial flutter (AFL) episodes, and proves consistently superior to a spatial-only ICA method. In simulated ECGs, a new methodology for the synthetic generation of realistic AF episodes is proposed, which includes a judicious comparison between the known AA content and the estimated AA sources. Using this methodology, the ICA technique obtains correlation indexes of 0.751, whereas the proposed approach obtains a correlation of 0.830 and an error in the estimated signal reduced by a factor of 40%. In real ECG recordings, we propose to measure performance by the spectral concentration (SC) around the main frequency peak. The spatiotemporal algorithm outperforms the ICA method, obtaining a SC of 58.8% and 44.7%, respectively.     

Temporal and spatial phase analyses of the electrocardiogram stratify intra-atrial and intra-ventricular organization

We hypothesized that electrocardiogram (ECG) spatial phase analysis would define a spectrum of intracardiac organization from atrial fibrillation (AF), nonisthmus-dependent and isthmus-dependent atrial flutter (AFL) to supraventricular tachycardias (SVT), and similarly for ventricular arrhythmias. We analyzed arrhythmia ECGs of 33 patients with isthmus (n = 9) and nonisthmus (n = 5) dependent AFL and SVT: atrial (n = 3), atrioventricular nodal (n = 3), and orthodromic reciprocating (n = 3) tachycardias, as well as AF (n = 5), ventricular tachycardia (monomorphic, VT-MM; n = 7), and fibrillation (VF; n = 3). ECG spatial phase was considered coherent when the correlation coefficient of an atrial (or ventricular) template to its ECG over time maintained a constant relationship in XY, XZ, and YZ planes. Regularity was quantified spectrally from ECG and correlation series. Spatial coherence occurred in 9/9 cases of isthmus--but only 1/5 of cases of nonisthmus-dependent AFL (p < 0.01; chi2). All showed one dominant spectral peak (temporal coherence). In AF, spatial phase was inconsistent in all planes and spectra were broad band. Temporal and spatial coherence occurred in other SVT. VT-MM maintained spatial phase and a single spectral peak, while VF displayed neither. Our conclusions are that temporal and spatial phase analysis from the ECG stratifies intra-atrial and intra-ventricular organization and reveals subtle variability lost on visual inspection.     

Extraction and analysis of T waves in electrocardiograms during atrial flutter

Analysis of T waves in the ECG is an essential clinical tool for diagnosis, monitoring, and follow-up of patients with heart dysfunction. During atrial flutter, this analysis has been so far limited by the perturbation of flutter waves superimposed over the T wave. This paper presents a method based on missing data interpolation for eliminating flutter waves from the ECG during atrial flutter. To cope with the correlation between atrial and ventricular electrical activations, the CLEAN deconvolution algorithm was applied to reconstruct the spectrum of the atrial component of the ECG from signal segments corresponding to TQ intervals. The locations of these TQ intervals, where the atrial contribution is presumably dominant, were identified iteratively. The algorithm yields the extracted atrial and ventricular contributions to the ECG. Standard T-wave morphology parameters (T-wave amplitude, T peak-T end duration, QT interval) were measured. This technique was validated using synthetic signals, compared to average beat subtraction in a patient with a pacemaker, and tested on pseudo-orthogonal ECGs from patients in atrial flutter. Results demonstrated improvements in accuracy and robustness of T-wave analysis as compared to current clinical practice.     

An automatic system for the analysis and classification of human atrial fibrillation patterns from intracardiac electrograms

This paper presents an automatic system for the analysis and classification of atrial fibrillation (AF) patterns from bipolar intracardiac signals. The system is made up of: 1) a feature-extraction module that defines and extracts a set of measures potentially useful for characterizing AF types on the basis of their degree of organization; 2) a feature-selection module (based on the Jeffries-Matusita distance and a branch and bound search algorithm) identifying the best subset of features for discriminating different AF types; and 3) a support vector machine technique-based classification module that automatically discriminates the AF types according to the Wells' criteria. The automatic system was applied on 100 intracardiac AF signal strips and on a selection of 11 representative features, demonstrating: a) the possibility to properly identify the most significant features for the discrimination of AF types; b) higher accuracy (97.7% using the seven most informative features) than the traditional maximum likelihood classifier; and c) effectiveness in AF classification also with few training samples (accuracy = 88.3% with only five training signals). Finally, the system identifies a combination of indices characterizing changes of morphology of atrial activation waves and perturbation of the isoelectric line as the most effective in separating the AF types.     

Cancellation of ventricular activity in the ECG: evaluation of novel and existing methods

Due to the much higher amplitude of the electrical activity of the ventricles in the surface electrocardiogram (ECG), its cancellation is crucial for the analysis and characterization of atrial fibrillation. In this paper, two different methods are proposed for this cancellation. The first one is an average beat subtraction type of method. Two sets of templates are created: one set for the ventricular depolarization waves and one for the ventricular repolarization waves. Next, spatial optimization (rotation and amplitude scaling) is applied to the QRS templates. The second method is a single beat method that cancels the ventricular involvement in each cardiac cycle in an independent manner. The estimation and cancellation of the ventricular repolarization is based on the concept of dominant T and U waves. Subsequently, the atrial activities during the ventricular depolarization intervals are estimated by a weighted sum of sinusoids observed in the cleaned up segments. ECG signals generated by a biophysical model as well as clinical ECG signals are used to evaluate the performance of the proposed methods in comparison to two standard ABS-based methods.     

Automatic classification of heartbeats using ECG morphology and heartbeat interval features

A method for the automatic processing of the electrocardiogram (ECG) for the classification of heartbeats is presented. The method allocates manually detected heartbeats to one of the five beat classes recommended by ANSI/AAMI EC57:1998 standard, i.e., normal beat, ventricular ectopic beat (VEB), supraventricular ectopic beat (SVEB), fusion of a normal and a VEB, or unknown beat type. Data was obtained from the 44 nonpacemaker recordings of the MIT-BIH arrhythmia database. The data was split into two datasets with each dataset containing approximately 50,000 beats from 22 recordings. The first dataset was used to select a classifier configuration from candidate configurations. Twelve configurations processing feature sets derived from two ECG leads were compared. Feature sets were based on ECG morphology, heartbeat intervals, and RR-intervals. All configurations adopted a statistical classifier model utilizing supervised learning. The second dataset was used to provide an independent performance assessment of the selected configuration. This assessment resulted in a sensitivity of 75.9%, a positive predictivity of 38.5%, and a false positive rate of 4.7% for the SVEB class. For the VEB class, the sensitivity was 77.7%, the positive predictivity was 81.9%, and the false positive rate was 1.2%. These results are an improvement on previously reported results for automated heartbeat classification systems.     

Spatiotemporal QRST cancellation techniques for analysis of atrial fibrillation

A new method for QRST cancellation is presented for the analysis of atrial fibrillation in the surface electrocardiogram (ECG). The method is based on a spatiotemporal signal model which accounts for dynamic changes in QRS morphology caused, e.g., by variations in the electrical axis of the heart. Using simulated atrial fibrillation signals added to normal ECGs, the results show that the spatiotemporal method performs considerably better than does straightforward average beat subtraction (ABS). In comparison to the ABS method, the average QRST-related error was reduced to 58 percent. The results obtained from ECGs with atrial fibrillation agreed very well with those from simulated fibrillation signals.     

A detector for a chronic implantable atrial tachyarrhythmia monitor

Continuous long-term monitoring of atrial fibrillation (AF) and tachycardia (AT) is an unmet clinical need, which could be met with a chronically-implanted monitor. Improved therapeutic decisions based on accurate monitoring of parameters, such as daily AF/AT burden (hours/ day) may lead to improvements in clinical outcomes such as reduction in hospitalizations, symptoms, and strokes. This paper describes an AF/AT detector that detects AF as well as AT with an irregular ventricular response, and a supplementary AT detector for AT with more regular ventricular response. Seven databases with significant durations of AF, AT, and sinus rhythm were used to evaluate the performance of the detectors. All patient records with AF (N = 124) were detected by the AF/AT detector to have AF/AT burden with a mean, median, and 75 percentile of absolute error in burden detection of 8.8, 0, and 4 min, respectively. In patients having AF burden (= or > 10 min), the AF/AT detector was found to have burden accuracy within 20% of true burden in 96% of patients. The specificity was 94%, defined as follows: in patient records without AF/AT (N = 174), the percentage with AF/AT burden = or < 10 min in the 24-h recordings. The AF/AT detector underestimatesAT burden, thus degrading performance, in patients with significant amounts of AT with more regular ventricular response. The supplementary AT detector reduces the underestimation of AT while overestimating burden in patients without a significant amount of AT. The detectors described here could be implemented in an implantable monitor for accurate long-term AF/AT monitoring.     

A high-temporal resolution algorithm for quantifying organization during atrial fibrillation

Atrial fibrillation (AF) has been described as a "random" or "chaotic" rhythm. Evidence suggests that AF may have transient episodes of temporal and spatial organization. We introduce a new algorithm that quantifies AF organization by the mean-squared error (MSE) in the linear prediction between two cardiac electrograms. This algorithm calculates organization at a finer temporal resolution. (approximately 300 ms) than previously published algorithms. Using canine atrial epicardial mapping data, we verified that the MSE algorithm showed nonfibrillatory rhythms to be significantly more organized than fibrillatory rhythms (p < .00001). Further, we compared the sensitivity of MSE to that of two previously published algorithms by analyzing AF with simulated noise and AF manipulated with vagal stimulation or by adenosine administration to alter the character of the AF. MSE performed favorably in the presence of noise. While all three algorithms distinguished between low and high vagal AF, MSE was the most sensitive in its discrimination. Only MSE could distinguish baseline AF from AF with adenosine. We conclude that our algorithm can distinguish different levels of organization during AF with a greater temporal resolution and sensitivity than previously described algorithms. This algorithm could lead to new ways of analyzing and understanding AF as well as improved techniques in AF therapy.     

Computer modeling of ventricular rhythm during atrial fibrillation and ventricular pacing

We propose a unified atrial fibrillation (AF)-ventricular pacing (VP) (AF-VP) model to demonstrate the effects of VP on the ventricular rhythm during atrial fibrillation AF. In this model, the AV junction (AVJ) is treated as a lumped structure characterized by refractoriness and automaticity. Bombarded by random AF impulses, the AVJ can also be invaded by the VP-induced retrograde wave. The model includes bidirectional conduction delays in the AVJ and ventricle. Both refractory period and conduction delay of the AVJ are dependent upon its recovery time. The electrotonic modulation by blocked impulses is also considered in the model. Our simulations show that, with proper parameter settings, the present model can account for most principal statistical properties of the RR intervals during AF. We further demonstrate that the AV conduction property and the ventricular rate in AF depend on both AF rate and the degree of electrotonic modulation in the AVJ. Finally, we show that multilevel interactions between AF and VP can generate various patterns of ventricular rhythm that are consistent with previous experimental observations.     

Comparison of atrial signal extraction algorithms in 12-lead ECGs with atrial fibrillation

Analysis of atrial rhythm is important in the treatment and management of patients with atrial fibrillation. Several algorithms exist for extracting the atrial signal from the electrocardiogram (ECG) in atrial fibrillation, but there are few reports on how well these techniques are able to recover the atrial signal. We assessed and compared three algorithms for extracting the atrial signal from the 12-lead ECG. The 12-lead ECGs of 30 patients in atrial fibrillation were analyzed. Atrial activity was extracted by three algorithms, Spatiotemporal QRST cancellation (STC), principal component analysis (PCA), and independent component analysis (ICA). The amplitude and frequency characteristics of the extracted atrial signals were compared between algorithms and against reference data. Mean (standard deviation) amplitude of QRST segments of V1 was 0.99 (0.54) mV, compared to 0.18 (0.11) mV (STC), 0.19 (0.13) mV (PCA), and 0.29 (0.22) mV (ICA). Hence, for all algorithms there were significant reductions in the amplitude of the ventricular activity compared with that in V1. Reference atrial signal amplitude in V1 was 0.18 (0.11) mV, compared to 0.17 (0.10) mV (STC), 0.12 (0.09) mV (PCA), and 0.18 (0.13) mV (ICA) in the extracted atrial signals. PCA tended to attenuate the atrial signal in these segments. There were no significant differences for any of the algorithms when comparing the amplitude of the reference atrial signal with that of the extracted atrial signals in segments in which ventricular activity had been removed. There were no significant differences between algorithms in the frequency characteristics of the extracted atrial signals. There were discrepancies in amplitude and frequency characteristics of the atrial signal in only a few cases resulting from notable residual ventricular activity for PCA and ICA algorithms. In conclusion, the extracted atrial signals from these algorithms exhibit very similar amplitude and frequency characteristics. Users of these algorithms should be observant of residual ventricular activities which can affect the analysis of the fibrillatory waveform in clinical practice.     

Preventive ablation strategies in a biophysical model of atrial fibrillation based on realistic anatomical data.

Ablation strategies to prevent episodes of paroxysmal atrial fibrillation (AF) have been subject to many clinical studies. The issues mainly concern pattern and transmurality of the lesions. This paper investigates ten different ablation strategies on a multilayered 3-D anatomical model of the atria with respect to 23 different setups of AF initiation in a biophysical computer model. There were 495 simulations carried out showing that circumferential lesions around the pulmonary veins (PVs) yield the highest success rate if at least two additional linear lesions are carried out. The findings compare with clinical studies as well as with other computer simulations. The anatomy and the setup of ectopic beats play an important role in the initiation and maintenance of AF as well as the resulting therapy. The computer model presented in this paper is a suitable tool to investigate different ablation strategies. By including individual patient anatomy and electrophysiological measurement, the model could be parameterized to yield an effective tool for future investigation of tailored ablation strategies and their effects on atrial fibrillation.     

Convolutive blind source separation algorithms applied to the electrocardiogram of atrial fibrillation: study of performance

The analysis of the surface electrocardiogram (ECG) is the most extended noninvasive technique in medical diagnosis of atrial fibrillation (AF). In order to use the ECG as a tool for the analysis of AF, we need to separate the atrial activity (AA) from other cardioelectric signals. In this matter, statistical signal processing techniques, like blind source separation (BSS), are able to perform a multilead statistical analysis with the aim to obtain the AA. Linear BSS techniques can be divided in two groups depending on the mixing model: algorithms where instantaneous mixing of sources is assumed, and convolutive BSS (CBSS) algorithms. In this work, a comparison of performance between one relevant CBSS algorithm, namely Infomax, and one of the most effective independent component analysis (ICA) algorithms, namely FastICA, is developed. To carry out the study, pseudoreal AF ECGs have been synthesized by adding fibrillation activity to normal sinus rhythm. The algorithm performances are expressed by two indexes: the signal to interference ratio (SIRAA) and the cross-correlation (RAA) between the original and the estimated AA. Results empirically prove that the instantaneous mixing model is the one that obtains the best results in the AA extraction, given that the mean SIRAA obtained by the FastICA algorithm (37.6 +/- 17.0 dB) is higher than the main SIRAA obtained by Infomax (28.5 +/- 14.2 dB). Also the RAA obtained by FastICA (0.92 +/- 0.13) is higher than the one obtained by Infomax (0.78 +/- 0.16).     

Phase-rectified signal averaging used to estimate the dominant frequencies in ECG signals during atrial fibrillation

Phase-rectified signal averaging (PRSA) is a technique recently introduced to enhance quasi-periodic signal components. An important parameter that can be extracted from surface ECG is the dominant frequency (DF) of atrial fibrillation (AF). AF signal components are always highly contaminated by the ventricular complexes, and the cancellation of these components is never perfect. The remaining artifacts tend to induce erroneous DF estimates. In this paper, we report on the use of PRSA in the context of noninvasive AF classification procedures for improving DF estimation. The potential of PRSA is demonstrated by experiments both on synthetic and clinical ECG signals.     

Real-time discrimination of ventricular tachyarrhythmia withFourier-transform neural network

The authors have developed a method to discriminate life-threatening ventricular arrhythmias by observing the QRS complex of the electrocardiogram (ECG) in each heartbeat. Changes in QRS complexes due to rhythm origination and conduction path were observed with the Fourier transform, and three kinds of rhythms were discriminated by a neural network. In this paper, the potential of the authors' method for clinical uses and real-time detection was examined using human surface ECGs and intracardiac electrograms (EGMs). The method achieved high sensitivity and specificity (>0.98) in discrimination of supraventricular rhythms from ventricular ones. The authors also present a hardware implementation of the algorithm on a commercial single-chip CPU     

Atrial activity extraction for atrial fibrillation analysis using blind source separation

This contribution addresses the extraction of atrial activity (AA) from real electrocardiogram (ECG) recordings of atrial fibrillation (AF). We show the appropriateness of independent component analysis (ICA) to tackle this biomedical challenge when regarded as a blind source separation (BSS) problem. ICA is a statistical tool able to reconstruct the unobservable independent sources of bioelectric activity which generate, through instantaneous linear mixing, a measurable set of signals. The three key hypothesis that make ICA applicable in the present scenario are discussed and validated: 1) AA and ventricular activity (VA) are generated by sources of independent bioelectric activity; 2) AA and VA present non-Gaussian distributions; and 3) the generation of the surface ECG potentials from the cardioelectric sources can be regarded as a narrow-band linear propagation process. To empirically endorse these claims, an ICA algorithm is applied to recordings from seven patients with persistent AF. We demonstrate that the AA source can be identified using a kurtosis-based reordering of the separated signals followed by spectral analysis of the sub-Gaussian sources. In contrast to traditional methods, the proposed BSS-based approach is able to obtain a unified AA signal by exploiting the atrial information present in every ECG lead, which results in an increased robustness with respect to electrode selection and placement.     

Hybrid finite element-modal analysis of jet engine inlet scattering

With the goal of characterizing jet engine inlets, a hybrid finite element-modal formulation is presented for the analysis of cavities with complex terminations. The finite element method (FEM) is used to find the generalized scattering matrix for an N-port representation of the complex termination. Where N is the number of traveling modes in the cavity. The cavity is assumed to be circular at the termination (engine) but the remainder of the cavity can be of arbitrary cross section. The scattered fields are obtained by tracing the fields back out of the cavity via a high frequency or modal technique with the generalized scattering matrix used in determining the fields at an aperture near the irregular cavity termination. “Proof of concept” results are presented and several issues relating to the implementation of the FEM are addressed. Among these, a new artificial absorber is developed for terminating the FEM mesh and the suitability of edge or node based elements is examined     

A patient-adaptable ECG beat classifier using a mixture of expertsapproach

Presents a “mixture-of-experts” (MOE) approach to develop customized electrocardiogram (EGG) beat classifier in an effort to further improve the performance of ECG processing and to offer individualized health care. A small customized classifier is developed based on brief, patient-specific ECG data. It is then combined with a global classifier, which is tuned to a large ECG database of many patients, to form a MOE classifier structure. Tested with MIT/BIH arrhythmia database, the authors observe significant performance enhancement using this approach     

Physiological parameter monitoring from optical recordings with a mobile phone

We show that a mobile phone can serve as an accurate monitor for several physiological variables, based on its ability to record and analyze the varying color signals of a fingertip placed in contact with its optical sensor. We confirm the accuracy of measurements of breathing rate, cardiac R-R intervals, and blood oxygen saturation, by comparisons to standard methods for making such measurements (respiration belts, ECGs, and pulse-oximeters, respectively). Measurement of respiratory rate uses a previously reported algorithm developed for use with a pulse-oximeter, based on amplitude and frequency modulation sequences within the light signal. We note that this technology can also be used with recently developed algorithms for detection of atrial fibrillation or blood loss.     

Association Rule Mining-Based Dissolved Gas Analysis for Fault Diagnosis of Power Transformers

This paper presents a novel association rule mining (ARM)-based dissolved gas analysis (DGA) approach to fault diagnosis (FD) of power transformers. In the development of the ARM-based DGA approach, an attribute selection method and a continuous datum attribute discretization method are used for choosing user-interested ARM attributes from a DGA data set, i.e. the items that are employed to extract association rules. The given DGA data set is composed of two parts, i.e. training and test DGA data sets. An ARM algorithm namely Apriori-Total From Partial is proposed for generating an association rule set (ARS) from the training DGA data set. Afterwards, an ARS simplification method and a rule fitness evaluation method are utilized to select useful rules from the ARS and assign a fitness value to each of the useful rules, respectively. Based upon the useful association rules, a transformer FD classifier is developed, in which an optimal rule selection method is employed for selecting the most accurate rule from the classifier for diagnosing a test DGA record. For comparison purposes, five widely used FD methods are also tested with the same training and test data sets in experiments. Results show that the proposed ARM-based DGA approach is capable of generating a number of meaningful association rules, which can also cover the empirical rules defined in industry standards. Moreover, a higher FD accuracy can be achieved with the association rule-based FD classifier, compared with that derived by the other methods.