YIELD STRESS OF FOOD DISPERSIONS WITH THE VANE METHOD AT CONTROLLED SHEAR RATE AND SHEAR STRESS

The vane method was used to measure yield stresses of 15 commercial food dispersions under controlled shear stress (Cσ) and controlled shear rate (C     ) operating conditions. Magnitudes of yield stress (σ_σ) at Cσ were higher than those of yield stress (σ     ) at C     on tomato products and baby foods. There were good linear correlations ( R ²= 0.96, 0.86) between γ     and σ^σ for food dispersions with undisturbed structure (UDS) and with broken down structure (BDS). Data obtained under Cσ were also used to calculate shear moduli of foods.     

Comparison of rheological models for determining dark chocolate viscosity

Parameters in chocolate rheology, namely shear viscosity and yield stress, are important in manufacture and directly influenced by product particle size distribution (PSD) and composition. The Casson model was the standard confectionery industry strategy to quantify rheological properties of molten chocolate until in 2000, the International Confectionery Association recommended the use of interpolation data to describe viscosity. The two strategies are compared and correlated in defining rheological properties of molten dark chocolates prepared using different PSD, fat and lecithin content. Rheological parameters were determined using a shear rate-controlled rheometer and data examined using correlation, regression and principal component analyses to establish their inter-relationships. Correlation and regression analyses showed high correlation ( r  = 0.89–1.00) and regression coefficients ( R ² = 0.84–1.00). The newer International Confectionery Association technique gave higher correlation and regression coefficients than the Casson model, but multivariate principal component analysis showed that the two models were highly related and either could effectively quantify dark chocolate viscosity parameters.     

RHEOLOGY OF DIFFERENT FORMULATIONS OF MILK CHOCOLATE AND THE EFFECT ON COATING THICKNESS

This work characterized the flow properties and investigated the effect of grind, emulsifier type and emulsifier level on the coating thickness of milk chocolate. Rheological properties were characterized using a concentric cylinder viscometer according to the method recommended by the International Confectionery Association. The thickness of the chocolate on dip‐coated acrylic plates was obtained by a gravimetric method. A three‐way analysis of variance was performed for the coating thickness. All three factors were significant; the thickness of the chocolate coating was greater for fine grind, soy lecithin for emulsifier and for low concentrations of emulsifier. The thicknesses were well predicted using the model with the Casson model parameters from the rheological characterization.