A design of multi‐layered location registration areas in microcellular systems

Multi‐layered location registration areas are considered to minimize the control signals at boundary cells in the microcellular systems. The decision of multi‐layered location registration (LR) areas is formulated as an integer programming problem by examining the regional subscriber densities, traffic flows and call arrival rates. By relaxing the constraints of forward and reverse control channels the problem is decomposed into a number of subproblems each of which corresponds to a layer. Each subproblem is solved via a modified graph partitioning algorithm. Feasible LR areas are obtained by considering the two relaxed constraints. Computational experiments are performed in a system with 80 microcells to investigate the performance of the proposed multi‐layer scheme. The simulation results indicate that the two‐layer scheme generally outperforms the one‐layer and three‐layer methods in view of control signals. This revised version was published online in August 2006 with corrections to the Cover Date.     

3G中增强的3层动态位置管理建模与分析

基于3G网络中由HLR(home location register)、GLR(gateway location register)、VLR(visitor location register)构成的3层数据库结构,提出了基于移动的增强动态位置管理策略,重点分析了该策略下位置更新和寻呼的代价模型。并使用该代价模型对3G网络中基于移动的增强动态位置管理策略、基于移动的基本动态位置管理策略和静态位置管理策略进行了评价,计算结果显示增强动态位置管理策略要优于基于移动的基本位置管理策略和静态位置管理策略。     

Spectrum efficiency analysis for microcellular mobile radio systems

Spectrum efficiency is analysed in a microcellular mobile radio environment considering an appropriate model for UHF ground-wave path loss. The influence of cluster size and reuse distance on the spectrum efficiency is investigated by obtaining the probability of cochannel interference for uncorrelated Rayleigh fading interferers and Rician fading desired signal. The effect of traffic intensity is also considered in evaluating the spectrum efficiency.<>     

A fully distributed location registration strategy for universalpersonal communication systems

The universal personal communication system (UPCS) is a system that enables anyone to communicate instantly with anyone else anywhere in the world. One of the crucial problems of such a system is locating hundreds of millions of moving portables in an efficient manner. The location registration strategy described is able to locate active portables automatically in the system with a small overhead in a distributed fashion. The system knows the exact position of an active portable in its service areas. The connection is set up by the system directly to its destination using the direct (shortest) path. The system capacity, efficiency, and inquiry time delay have been improved greatly compared to the leading existing techniques. It is shown that in the proposed system, the maximum database size is 0.51% and the database updating cost is 6.86% of that needed by a central database system under a specified scenario     

Optimal location area design to minimize registration signaling traffic in wireless systems

A new scheme is developed for optimal location area design in wireless systems. New algorithms based on intercell traffic prediction and traffic-based cell grouping are used to select the optimal set of cells for location areas (LAs). The expected intercell movement patterns of mobiles are determined by using the new intercell traffic prediction algorithm. Further, the cells are partitioned into LAs by applying the new traffic-based cell grouping algorithm where the cell pairs with higher intercell mobile traffic are grouped into the same LA. Hence, the inter-LA mobile traffic is decreased by increasing the intra-LA mobile traffic. Experimental results show that this cell grouping algorithm reduces the number of location updates by 27 percent to 36 percent on average compared to proximity-based cell grouping schemes.     

Performance analysis of microcellular mobile radio systems with shadowed cochannel interferers

A study is presented of microcellular mobile radio systems where the desired signal has Rician statistics and cochannel interferers experience lognormal shadowing as well as Rayleigh fading. This implies a Rician/Rayleigh-plus-lognormal microcell interference model. The probability density function of the signal-to-interference ratio is derived and used to evaluate the performance of microcellular systems in terms of the outage probability.<>     

Problem of dynamic change of tags location in anticollision RFID systems

Presently the necessity of building anticollision RFID systems with dynamic location change of tags appear more often. Such solutions are used in identification of moving cars, trains (automatic identification of vehicles – AVI processes) as well as moving parts and elements in industry, commerce, science and medicine (internet of things). In the paper there were presented operation stages in the RFID anticollision system necessary to communicate with groups of tags entering and leaving read/write device interrogation zone and communication phases in conditions of dynamic location change of tags. The mentioned aspects influence RFID system reliability, which is characterized by the efficiency coefficient and the identification probability of objects in specific interrogation zone. The communication conditions of correct operation of multiple RFID system are crucial for efficient exchange of data with all tags during their dynamic location changes. Presented problem will be the base to specify new application tag parameters (such as maximum speed of tag motion) and synthesis of interrogation zone required for concrete anticollision RFID applications with dynamic location change of tags.     

A dynamic location management scheme for next-generation multitierPCS systems

Global wireless networks enable mobile users to communicate regardless of their locations. One of the most important issues is location management in a highly dynamic environment because mobile users may roam between different wireless systems, network operators, and geographical regions. A location-tracking mechanism is introduced that consists of intersystem location updates and intersystem paging. Intersystem update is implemented by using the concept of boundary location area, which is determined by a dynamic location update policy in which the velocity and the quality of service are taken into account on a per-user basis. Also, intersystem paging is based on the concept of a boundary location register, which is used to maintain the records of mobile users crossing the boundary of systems. This mechanism not only reduces location-tracking costs, but also significantly decreases call-loss rates and average-paging delays. The performance evaluation of the proposed schemes is provided to demonstrate their effectiveness in multitier personal communication systems     

Investigations into cochannel interference in microcellular mobileradio systems

A microcell interference model termed the Nakagami m_x/m_y model is introduced. The desired signal and the cochannel interferers are assumed to have Nakagami statistics but with different amounts of fading. A special case of this model is obtained when the desired signal has Nakagami statistics while the cochannel interferers are subject to Rayleigh fading. The probability density function of the signal-to-interference ratio in the Nakagami model is derived. This model is also compared with a Rician/Rayleigh microcellular model. Expressions for the outage probabilities in microcell systems are derived. Numerical results show that, compared to medium/large cell systems, the microcellular systems have a lower outage probability. The impact of diversity on the microcellular system is also studied. An improvement of the outage probability due to diversity is observed     

Modeling and performance analysis of dynamic spectrum sharing between DSRC and Wi‐Fi systems

The Notice of Proposed Rulemaking 13‐22 released by Federal Communications Commission unlocks the Dedicated Short Range Communication (DSRC) spectrum for Wi‐Fi availability, which undoubtedly brings unpredictable effects to the new‐emerging vehicular applications and services. To efficiently harmonize the spectrum operation between DSRC and Wi‐Fi networks, several dynamic spectrum‐sharing schemes are already proposed to improve the spectral efficiency over a limited bandwidth situation and as well to satisfy the ever‐increasing demand for bandwidth resource. Different from most previous literature that mainly focused on the performance analysis of cellular‐network‐centric spectrum sharing, we aim to analyze the performance of the mainstream dynamic spectrum‐sharing schemes specially designed for the coexistence of DSRC and Wi‐Fi networks against various combinations of network parameters through a hybrid network model and performance indicators. We employ the Poisson point process to model a hybrid network where DSRC vehicles and Wi‐Fi devices coexist, and introduce the performance indicators of spectrum efficiency and data rate to assess the utility of different spectrum sharing candidates. Through the presented hybrid model and performance indicators, we collect extensive numerical and simulation results to investigate four typical spectrum allocation schemes for DSRC and Wi‐Fi coexistence, that is non‐sharing scheme, original sharing scheme, and Qualcomm's and Cisco's proposals, respectively. The results show that the dynamic spectrum sharing in the 5.9‐GHz band can significantly raise the performance of Wi‐Fi network without excessively degrading the DSRC system, and especially the Cisco's proposal prefers to protect the DSRC profit while the Qualcomm's draft favors Wi‐Fi exclusively. Copyright © 2016 John Wiley & Sons, Ltd.     

Bayes analysis for fault location in distributed systems

The authors propose a simple and practical probabilistic model, using multiple incomplete test concepts, for fault location in distributed systems using a Bayes analysis procedure. Since it is easier to compare test results among processing units, their model is comparison-based. This approach is realistic and complete in the sense that it does not assume conditions such as permanently faulty units, complete tests, and perfect or nonmalicious environments. It can handle, without any overhead, fault-free systems so that the test procedure can be used to monitor a functioning system. Given a system S with a specific test graph, the corresponding conditional distribution between the comparison test results (syndrome) and the fault patterns of S can be generated. To avoid the complex global Bayes estimation process, the authors develop a simple bitwise Bayes algorithm for fault location of S, which locates system failures with linear complexity, making it suitable for hard real-time systems. Hence, their approach is appealing both from the practical and theoretical points of view     

Modeling and analysis of spacecraft power systems

A comprehensive large-scale power system modeling technique using the multiport coupling method is developed to facilitate design and analysis of present and future spacecraft power systems. The Boeing Computer Service's EASY5 program was used as the host software to meet various modeling and analysis needs for DC, small-signal, and large-signal analyses. Power subsystem or component model development from empirical data and reduced-order model generation using the complex curve-fitting technique are also introduced. A sample spacecraft power system, the simplified Direct Energy Transfer system, is modeled and its performance demonstrated     

一类多速率传感器动态系统的建模与估计

研究了一类时变线性动态系统的多速率多传感器数据融合状态估计问题.首先,在不同传感器以不同采样率对同一目标进行观测的情况下,提出了一种多速率建模方法,该方法可将多采样率的融合估计问题转化为同采样率的状态估计问题.随后,利用Kalman滤波对目标状态进行了在线估计,并利用有反馈分布式融合结构对上述估计进行了有机融合,从而获得了目标状态的最优融合估计值.该方法不需要对状态或观测进行扩维,计算量适当,保证了算法的实时性.以景象匹配辅助GPS/INS组合导航为例,在两种采样关系下,分别做了仿真,仿真结果验证了算法的有效性.     

Modeling and analysis of message passing in distributedmanufacturing systems

This paper addresses the information flow between devices and programs in computer integrated manufacturing systems. Specifically, it presents modeling techniques and methods for detecting the existence of message paths among hardware and software components and the upper bound on time delays along that message path. The modeling technique can be used to analyze interoperability between hardware and software components in the system in initial design and specification. The modeling technique has three components: an object model to describe the message passing protocols between communicating components; a color timed Petri net to describe the dynamic behavior and state dependency within each individual component; and an object synthesis method that integrates the Petri nets of individual objects and message protocols between objects to describe the dynamics of the entire system. The graphical modeling can enhance communication among different groups involved in system design and the analytical method can provide component specifications. The use of the modeling technique and method in early system design can result in time and cost savings in system integration due to better communication, better component selection and early problem identification     

Performance simulation of NC-PRMA with signatures in microcellular communication systems

Packet reservation multiple access (PRMA) improves capacity in microcellular systems compared with time division multiple access (TDMA) or frequency division multiple access (FDMA). In PRMA, when a mobile terminal has information packets to transmit, it contends with other terminals for access to a common radio channel. Therefore the main performance degradation is due to the collision of terminals simultaneously transmitting packets. In this paper we propose a non-collision PRMA (NC-PRMA) protocol with signatures to achieve a better performance than PRMA does. Two classes of duplexing schemes, frequency division duplexing (FDD) and shared time division duplexing (STDD), are explored and two speech activity models, slow and fast, in both FDD and STDD schemes are studied. From the results of a computer simulation it is observed that, with the constraint of a packet-dropping rate no greater than 0·01, NC-PRMA can support 38 (43) and 45 (49) users respectively under the FDD and STDD schemes if the slow (fast) speech activity detector is adopted. © 1998 John Wiley & Sons, Ltd.     

TDMA based adaptive modulation with dynamic channel assignment(AMDCA) for large capacity voice transmission in microcellular systems

The authors propose an adaptive modulation with dynamic channel assignment (AMDCA) to achieve high capacity voice transmission in microcellular systems. The proposed system measures the received carrier-to-noise plus interference power ratio (C/(N+I)) of each time division multiple access (TDMA) slot to search for available slots and to discover the optimum modulation parameters for each slot, thereby effectively combining the buffeting effect of spatially distributed electric field strength by slow adaptive modulation, and that of spatially and temporally distributed traffic by dynamic channel assignment (DCA). Computer simulation confirms that the proposed AMDCA system can achieve ~7.5 times higher system capacity than the conventional QPSR with a fixed channel assignment (FCA)     

Capacity analysis of spectrally overlaid macro/microcellular CDMA systems supporting multiple types of traffic

The reverse link capacity of a spectrally overlaid macrocell/microcell cellular code-division multiple-access system supporting various types of traffic is analyzed. Several narrowband subsystems are overlaid with a wideband subsystem in macrocells, while in a microcell, a single narrowband subsystem is operated with the same spectrum as one of the macrocell narrowband subsystems. Using a typical propagation model, the reverse link signal power and interference are characterized as the relative user signal power and the cross-tier interference factors between the macrocell and the microcell, considering various system parameters. The reverse link capacity of the overlay system is then analyzed. Results show that the dominant parameters affecting the system performance are the spectral overlay ratio and the distance between the microcell and macrocell base stations. In particular, when the distance equals half of the macrocell radius, optimum performance can be achieved by minimizing the cross-tier interference factors. These results can be applied to network planning for future wireless communication services.     

Modeling and analysis of standby redundant computing systems

In this paper, we have developed performance models to represent the fault-tolerant characteristics of standby redundant computing systems. These models have the advantage of being quite general and are useful to study the performance characteristics under any arbitrary life time distribution for the components of the system. For the proposed models, we have derived expressions for three performance metrics for these systems.