High‐Performance n‐Channel Organic Transistors Using High‐Molecular‐Weight Electron‐Deficient Copolymers and Amine‐Tailed Self‐Assembled Monolayers

While high‐performance p‐type semiconducting polymers are widely reported, their n‐type counterparts are still rare in terms of quantity and quality. Here, an improved Stille polymerization protocol using chlorobenzene as the solvent and palladium(0)/copper(I) as the catalyst is developed to synthesize high‐quality n‐type polymers with number‐average molecular weight up to 10⁵ g mol^?1. Furthermore, by sp²‐nitrogen atoms (sp²‐N) substitution, three new n‐type polymers, namely, pBTTz, pPPT, and pSNT, are synthesized, and the effect of different sp²‐N substitution positions on the device performances is studied for the first time. It is found that the incorporation of sp²‐N into the acceptor units rather than the donor units results in superior crystalline microstructures and higher electron mobilities. Furthermore, an amine‐tailed self‐assembled monolayer (SAM) is smoothly formed on a Si/SiO₂ substrate by a simple spin‐coating technique, which can facilitate the accumulation of electrons and lead to more perfect unipolar n‐type transistor performances. Therefore, a remarkably high unipolar electron mobility up to 5.35 cm² V^?1 s^?1 with a low threshold voltage (≈1 V) and high on/off current ratio of ≈10⁷ is demonstrated for the pSNT‐based devices, which are among the highest values for unipolar n‐type semiconducting polymers.     

Electron‐Beam‐Driven III‐Nitride Plasmonic Nanolasers in the Deep‐UV and Visible Region

Plasmonic nanolasers based on wide bandgap semiconductors are presently attracting immense research interests due to the breaking in light diffraction limit and subwavelength mode operation with fast dynamics. However, these plasmonic nanolasers have so far been mostly realized in the visible light ranges, or most are still under optical excitation pumping. In this work, III‐nitride‐based plasmonic nanolasers emitting from the green to the deep‐ultraviolet (UV) region by energetic electron beam injection are reported, and a threshold as low as 8 kW cm^?2 is achieved. A fast decay time as short as 123 ps is collected, indicating a strong coupling between excitons and surface plasmon. Both the spatial and temporal coherences are observed, which provide a solid evidence for exciton‐plasmon coupled polariton lasing. Consequently, the achievements in III‐nitride‐based plasmonic nanolaser devices represent a significant step toward practical applications for biological technology, computing systems, and on‐chip optical communication.     

Platelet‐to‐lymphocyte ratio better predicts inflammation than neutrophil‐to‐lymphocyte ratio in end‐stage renal disease patients

Neutrophil‐to‐lymphocyte ratio (NLR) was introduced as a potential marker to determine inflammation in end‐stage renal disease (ESRD) patients. Recently, platelet‐to‐lymphocyte ratio (PLR) and NLR were found to positively correlated with inflammatory markers including tumor necrosis factor‐α (TNF‐α) and interleukin (IL)‐6 in cardiac and noncardiac patients. Data regarding PLR and its association with inflammation are lacking in hemodialysis (HD) and peritoneal dialysis (PD) patients. Hence, we aimed to determine the relationship between PLR, NLR, and inflammation in ESRD patients. This was a cross‐sectional study involving 62 ESRD patients (29 females, 33 males; mean age, 49.6 ± 14.6 years) receiving PD or HD for ≥6 months in the Dialysis Unit of Necmettin Erbakan University. PLR, NLR, C‐reactive protein, TNF‐α, IL‐6 levels were measured. PLR, NLR, serum high sensitive C‐reactive protein, IL‐6, and TNF‐α levels were significantly higher in PD patients when compared with HD patients. ESRD patients with PLR ≥ 140 had significantly higher NLR, IL‐6, and TNF‐α levels when compared to patients with PLR < 139. In the bivariate correlation analysis, PLR was positively correlated with NLR, IL‐6, and TNF‐α in this population. When we compared the association of PLR and NLR with IL‐6 (r = 0.371, P = 0.003 vs. r = 0.263, P = 0.04, respectively) and TNF‐α (r = 0.334, P = 0.008 vs. r = 0.273, P = 0.032, respectively), PLR was found to be superior to NLR in terms of inflammation in ESRD patients. Simple calculation of PLR can predict inflammation better than NLR in ESRD patients.     

Progress in Piezo‐Phototronic‐Effect‐Enhanced Light‐Emitting Diodes and Pressure Imaging

Wurtzite materials exhibit both semiconductor and piezoelectric properties under strains due to the non‐central symmetric crystal structures. The three‐way coupling of semiconductor properties, piezoelectric polarization and optical excitation in ZnO, GaN, CdS and other piezoelectric semiconductors leads to the emerging field of piezo‐phototronics. This effect can efficiently manipulate the emission intensity of light‐emitting diodes (LEDs) by utilizing the piezo‐polarization charges created at the junction upon straining to modulate the energy band diagrams and the optoelectronic processes, such as generation, separation, recombination and/or transport of charge carriers. Starting from fundamental physics principles, recent progress in piezo‐phototronic‐effect‐enhanced LEDs is reviewed; following their development from single‐nanowire pressure‐sensitive devices to high‐resolution array matrices for pressure‐distribution mapping applications. The piezo‐phototronic effect provides a promising method to enhance the light emission of LEDs based on piezoelectric semiconductors through applying static strains, and may find perspective applications in various optoelectronic devices and integrated systems.     

Advances in Hydrogels in Organoids and Organs‐on‐a‐Chip

Significant advances in materials, microscale technology, and stem cell biology have enabled the construction of 3D tissues and organs, which will ultimately lead to more effective diagnostics and therapy. Organoids and organs‐on‐a‐chip (OOC), evolved from developmental biology and bioengineering principles, have emerged as major technological breakthrough and distinct model systems to revolutionize biomedical research and drug discovery by recapitulating the key structural and functional complexity of human organs in vitro. There is growing interest in the development of functional biomaterials, especially hydrogels, for utilization in these promising systems to build more physiologically relevant 3D tissues with defined properties. The remarkable properties of defined hydrogels as proper extracellular matrix that can instruct cellular behaviors are presented. The recent trend where functional hydrogels are integrated into organoids and OOC systems for the construction of 3D tissue models is highlighted. Future opportunities and perspectives in the development of advanced hydrogels toward accelerating organoids and OOC research in biomedical applications are also discussed.     

Scaffold‐Free Liver‐On‐A‐Chip with Multiscale Organotypic Cultures

The considerable advances that have been made in the development of organotypic cultures have failed to overcome the challenges of expressing tissue‐specific functions and complexities, especially for organs that require multitasking and complex biological processes, such as the liver. Primary liver cells are ideal biological building blocks for functional organotypic reconstruction, but are limited by their rapid loss of physiological integrity in vitro. Here the concept of lattice growth used in material science is applied to develop a tissue incubator, which provides physiological cues and controls the 3D assembly of primary cells. The cues include a biological growing template, spatial coculture, biomimetic radial flow, and circulation in a scaffold‐free condition. The feasibility of recapitulating a multiscale physiological structural hierarchy, complex drug clearance, and zonal physiology from the cell to tissue level in long‐term cultured liver‐on‐a‐chip is demonstrated. These methods are promising for future applications in pharmacodynamics and personal medicine.     

Magneto‐Photoluminescence Based on Two‐Photon Excitation in Lanthanide‐Doped Up‐Conversion Crystal Particles

Experimental studies on magneto‐photoluminescence based on two‐photon excitation in up‐conversion Y₂O₂S:Er, Yb crystal particles are reported. It is found that the up‐conversion photoluminescence generated by two‐photon excitation exhibits magnetic field effects at room temperature, leading to a two‐photon excitation‐induced magneto‐photoluminescence, when the two‐photon excitation exceeds the critical intensity. By considering the spin selection rule in electronic transitions, it is proposed that spin‐antiparallel and spin‐parallel transition dipoles with spin mixing are accountable for the observed magneto‐photoluminescence. Specifically, the two‐photon excitation generates spin‐antiparallel electric dipoles between ⁴S_3/2–⁴I_15/2 in Er³⁺ ions. The antiparallel spins are conserved by exchange interaction within dipoles. When the photoexcitation exceeds the critical intensity, the Coulomb screening can decrease the exchange interaction. Consequently, the spin–orbital coupling can partially convert the antiparallel dipoles into parallel dipoles, generating a spin mixing. Eventually, the populations between antiparallel and parallel dipoles reach an equilibrium established by the competition between exchange interaction and spin–orbital coupling. Applying a magnetic field can break the equilibrium by disturbing spin mixing through introducing spin precessions, changing the spin populations on antiparallel and parallel dipoles and leading to the magneto‐photoluminescence. Therefore, spin‐dependent transition dipoles present a convenient mechanism to realize magneto‐photoluminescence in multiphoton up‐conversion crystal particles.     

Visible‐Light‐Induced Self‐Organized Helical Superstructure in Orientationally Ordered Fluids

Light‐induced phenomena occurring in nature and in synthetic materials are fascinating and have been exploited for technological applications. Here visible‐light‐induced formation of a helical superstructure is reported, i.e., a cholesteric liquid crystal phase, in orientationally ordered fluids, i.e., nematic liquid crystals, enabled by a visible‐light‐driven chiral molecular switch. The cyclic‐azobenzene‐based chiral molecular switch exhibits reversible photoisomerization in response to visible light of different wavelengths due to the band separation of n–π* transitions of its trans‐ and cis‐isomers. Green light (530 nm) drives the trans‐to‐cis photoisomerization whereas the cis‐to‐trans isomerization process of the chiral molecular switch can be caused by blue light (440 nm). It is observed that the helical twisting power of this chiral molecular switch increases upon irradiation with green light, which enables reversible induction of helical superstructure in nematic liquid crystals containing a very small quantity of the molecular switch. The occurrence of the light‐induced helical superstructure enables the formation of diffraction gratings in cholesteric films.     

A Polymer Encapsulation Strategy to Synthesize Porous Nitrogen‐Doped Carbon‐Nanosphere‐Supported Metal Isolated‐Single‐Atomic‐Site Catalysts

A novel polymer encapsulation strategy to synthesize metal isolated‐single‐atomic‐site (ISAS) catalysts supported by porous nitrogen‐doped carbon nanospheres is reported. First, metal precursors are encapsulated in situ by polymers through polymerization; then, metal ISASs are created within the polymer‐derived p‐CN nanospheres by controlled pyrolysis at high temperature (200–900 °C). Transmission electron microscopy and N₂ sorption results reveal this material to exhibit a nanospheric morphology, a high surface area (≈380 m² g^?1), and a porous structure (with micropores and mesopores). Characterization by aberration‐corrected high‐angle annular dark‐field scanning transmission electron microscopy and X‐ray absorption fine structure confirms the metal to be present as metal ISASs. This methodology is applicable to both noble and nonprecious metals (M‐ISAS/p‐CN, M = Co, Ni, Cu, Mn, Pd, etc.). In particular, the Co‐ISAS/p‐CN nanospheres obtained using this method show comparable (E_1/2 = 0.838 V) electrochemical oxygen reduction activity to commercial Pt/C with 20 wt% Pt loading (E_1/2 = 0.834 V) in alkaline media, superior methanol tolerance, and outstanding stability, even after 5000 cycles.     

Ultrahigh Photocatalytic Rate at a Single‐Metal‐Atom‐Oxide

Metal oxides, as one of the mostly abundant and widely utilized materials, are extensively investigated and applied in environmental remediation and protection, and in energy conversion and storage. Most of these diverse applications are the result of a large diversity of the electronic states of metal oxides. Noticeably, however, many metal oxides present obstacles for applications in catalysis, mainly due to the lack of efficient active sites with desired electronic states. Here, the fabrication of single‐tungsten‐atom‐oxide (STAO) is demonstrated, in which the metal oxide's volume reaches its minimum as a unit cell. The catalytic mechanism in the STAO is determined by a new single‐site physics mechanism, named as quasi‐atom physics. The photogenerated electron transfer process is enabled by an electron in the spin‐up channel excited from the highest occupied molecular orbital to the lowest unoccupied molecular orbital +1 state, which can only occur in STAO with W⁵⁺. STAO results in a record‐high and stable sunlight photocatalytic degradation rate of 0.24 s^?1, which exceeds the rates of available photocatalysts by two orders of magnitude. The fabrication of STAO and its unique quasi‐atom photocatalytic mechanism lays new ground for achieving novel physical and chemical properties using single‐metal‐atom oxides (SMAO).     

Schleifbearbeitung von Hart‐Weich‐Verbunden – Finite‐Elemente‐Simulation des Schleifprozesses von hybriden Schichtverbunden

Grinding of ceramic‐metal‐compounds – finite element analysis simulation of the grinding process of hybrid stratified compounds In this paper, the subproject TP 8 “Grinding of ceramic‐metal‐compounds” is been introduced. An adapted grinding strategy should be created for the production of a ceramic‐cemented carbide compound drill. This aim should be obtained with experimental analysis and the use of finite element analysis to simulate the grinding process of ceramic‐cemented carbide compound drill. Furthermore a basic approach for simulating the grinding process of hybrid stratified compounds is been presented, which should be a basis for a finite element analysis simulation of a grinding process of ceramic‐cemented carbide compound drill.     

Quasi‐Solid‐State Single‐Atom Transistors

The single‐atom transistor represents a quantum electronic device at room temperature, allowing the switching of an electric current by the controlled and reversible relocation of one single atom within a metallic quantum point contact. So far, the device operates by applying a small voltage to a control electrode or “gate” within the aqueous electrolyte. Here, the operation of the atomic device in the quasi‐solid state is demonstrated. Gelation of pyrogenic silica transforms the electrolyte into the quasi‐solid state, exhibiting the cohesive properties of a solid and the diffusive properties of a liquid, preventing the leakage problem and avoiding the handling of a liquid system. The electrolyte is characterized by cyclic voltammetry, conductivity measurements, and rotation viscometry. Thus, a first demonstration of the single‐atom transistor operating in the quasi‐solid‐state is given. The silver single‐atom and atomic‐scale transistors in the quasi‐solid‐state allow bistable switching between zero and quantized conductance levels, which are integer multiples of the conductance quantum G₀ = 2e²/h. Source–drain currents ranging from 1 to 8 µA are applied in these experiments. Any obvious influence of the gelation of the aqueous electrolyte on the electron transport within the quantum point contact is not observed.