共查询到20条相似文献,搜索用时 703 毫秒
1.
2.
太阳能-地源热泵的温室加热系统试验研究 总被引:1,自引:0,他引:1
针对传统的温室加热方式耗能大,污染环境等问题,设计并建造了以太阳能作为驱动热源与地源热泵相结合的温室加热系统,并从能和火用两方面对其特性和应用效果的各影响因素进行了试验分析,提出了提高利用率的措施. 相似文献
3.
4.
德国Envromissiom公司开发了一种被称作太阳塔的电站,该电站将温室、烟囱和涡轮发电机三者以一种新颖的方式结合起来,生成太阳塔这一大规模发电的前沿技术。其核心就是一个十分高耸的烟囱,烟囱周围是大面积的太阳温室,温室下的空气被太阳辐射加热后,在烟囱 相似文献
5.
6.
介绍了一种配置有喷水及碎石储热系统的太阳能温室。该温室利用喷水和碎石储热槽对温室内的气温进行调整,用于植物和花卉的栽培。文中对该温室的储热效果进行了测试,结果表明,这种太阳能温室运行方式具有很好的平衡室内温度的效果。 相似文献
7.
8.
9.
10.
《京都议定书》规定,到2012年,所有发达国家二氧化碳等6种温室气体的排放量,要比1990年减少5.2%,欧盟的任务是减少8%。为通过有效的经济方式实现京都目标,欧盟制定了自2005年1月1日开始实施的温室气体排放交易制度。 相似文献
11.
文章分析了传统二维工装设叶方式的不足,在此基础上提出了工装三维设计流程。以导叶片拂配工装为例,详细介绍了三维设计技术在工装设计中的应用。工装的三维设计技术改变了传统工装设计模式,提高了工装设计的效率,并解决了空间要求较高的工装设计问题。 相似文献
12.
This review summarized the experimental design methods used to investigate the effects of various factors on fermentative hydrogen production processes, including one-factor-at-a-time design, full factorial design, Taguchi design, Plackett–Burman design, central composite design and Box–Behnken design. Each design method was briefly introduced, followed by the introduction of its analysis. In addition, the advantages and disadvantages of each design method were briefly discussed. Moreover, the application of each design method to the study of fermentative hydrogen production was analyzed and discussed. Based on the discussion in this review, an experimental design strategy for optimizing fermentative hydrogen production processes was proposed. In the end, the software packages that can carry out the above mentioned factorial design and analysis were briefly introduced. 相似文献
13.
随着城市化进程的加快,城市暴雨致灾所导致的社会影响和经济损失越来越大,合理规划城区内排水体系就成为当前的研究难点。针对城市排水体系中区域排涝和市政排水综合设计需求,首先对现行城市排涝和城市排水相关设计暴雨规范进行分析,由此提出城市内涝综合设计暴雨计算与评判方法,并以武汉市汉口区黄孝河地区排水系统为例进行了综合设计暴雨和排涝流量计算。结果表明,考虑降雨强度和降雨总量的综合设计暴雨方法,符合研究区域特性,能较好地将城市排水与排涝设计有机联系起来,满足排水与排涝综合设计需求。该研究成果可应用于城市防洪、排水排涝系统现状评估和城市规划等方面。 相似文献
14.
介绍功能主义设计和设计硬点的思想,提出以功能驱动的硬点结构设计方法,并通过此方法对进气系统的结构设计进行分析。着重分析空气滤清器在客车上的布置和进气系统管路的设计,得到相应的设计准则和设计硬点,为进气系统设计提供了思路方法和理论依据。 相似文献
15.
在高层建筑设计中,抗震设计是必不可少的1个环节,阐述了高层建筑抗震设计思想和原则,探讨了抗震设计中的细节及抗震材料。 相似文献
16.
17.
分析了环境艺术设计中绿色设计理念的主要原则,通过总结绿色设计理念的主要设计原则,得出了绿色设计理念在环境艺术设计中的实践应用方法。 相似文献
18.
从300MW高压给水加热器热力设计与计算出发,基于最优化设计的思想与方法,以胜利300MW高加热力设计与计算为例,探讨热力设计与计算优化设计问题,揭示热力设计与传热计算对决定高加性能和技术指标,重量,成本,运行可靠性等,所起到的至关重要作用,可供设计者参考。 相似文献
19.
Design optimization of insulation usage and space conditioning load using energy simulation and genetic algorithm 总被引:1,自引:0,他引:1
Architectural design is a process to find the best solution to satisfy various design criteria. To achieve sustainable and green design, performance simulations are often used to verify these criteria and modify the design. The conventional approach of manual trial-and-error is too time-consuming to be practical. Introducing optimization technique can greatly improve the design efficiency and help designers find the optimal design. In this paper, modeFRONTIER was used as the design optimization environment to find the best insulation strategy to minimize the space conditioning load of an office building located in Nanjing, China while keeping the insulation usage at minimum. EnergyPlus was integrated into the optimization tool by writing a DOS batch file to automate the work flow. The search engine was the genetic algorithm and it proved to be able to generate a well-defined Pareto frontier in a reasonable number of runs. Based on the Pareto frontier, the designer can specify his preferences and select the final design. The case study shows that an energy simulation program can be effectively integrated into a design optimization environment to find the optimal design. The technique presented has a broad application in architectural design, especially when the design considerations are multi-objective. 相似文献
20.
基于KBE叶片快速设计方法的研究与实现 总被引:3,自引:0,他引:3
复杂产品设计过程是不断迭代反复的过程。为解决汽轮机叶片设计效率低,从汽轮机叶片结构及设计过程出发,定义叶片设计过程向导;提供自动处理叶片型线方法,实现叶身的快速设计;根据叶片结构特点,采用特征设计技术,快速定义叶根、拉筋、围带;基于动静叶片依赖关系,实现动静叶片之间、叶身、叶根、中间体之间的相关性设计;按照叶片设计中气动、强度要求,实现叶片设计与分析的自动优化。以汽轮机某型号叶片为例,在自行开发的叶片快速设计系统上验证本文提出的方法,结果表明,叶片设计效率得到很大的提高,提出的叶片快速设计方法有效可行。 相似文献