Preparation and photocatalytic activity of silver and TiO2 nanoparticles/montmorillonite composites

Ag–TiO₂/montmorillonite (Ag–TiO₂/MMT) was synthesized as photocatalyst using TiCl₄ hydrolysis to introduce nanosized TiO₂ into the interlayer space of the montmorillonite (MMT). Stable pillared TiO₂/MMT was obtained by calcination at 500 °C, then silver was loaded by reduction of silver nitrate. The physico–chemical properties of the photocatalyst were determined by X-ray diffraction (XRD), infrared spectroscopy (IR), atomic absorption spectrophotometer (AAS), nitrogen gas adsorption (BET method) and UV–Visible spectra. The photooxidation activity for methylene blue (M.B.) degradation was as follows: Ag–TiO₂/MMT > TiO₂/MMT > TiO₂(P25). Among them Ag–TiO₂/MMT had the highest photooxidation activity because of its larger specific surface caused by pillaring and loading of silver for improving its light absorption.     

Effect of carbon doping on WO3/TiO2 coupled oxide and its photocatalytic activity on diclofenac degradation

The improved photocatalyst carbon-doped WO₃/TiO₂ mixed oxide was synthesized in this study using the sol–gel method. The catalyst was thoroughly characterized by X-ray diffraction (XRD), diffuse reflectance UV–vis spectroscopy, N₂ adsorption desorption analysis, scanning electron microscopy coupled with energy dispersive X-ray analysis (SEM/EDX), transmission electron microscopy (TEM) and X-ray photoelectron spectroscopy (XPS). The photocatalytic efficiency of the prepared materials was evaluated with respect to the degradation of sodium diclofenac (DCF) in a batch reactor irradiated under simulated solar light. The progress of the degradation process of the drug was evaluated by high-performance liquid chromatography (HPLC), whereas mineralization was monitored by total organic carbon analysis (TOC) and ion chromatography (IC). The results of the photocatalytic evaluation indicated that the modified catalyst with tungsten and carbon (TWC) exhibited higher photocatalytic activity than TiO₂ (T) and WO₃/TiO₂ (TW) in the degradation and mineralization of diclofenac (TWC>TW>T). Complete degradation of diclofenac occurred at 250 kJ m⁻² of accumulated energy, whereas 82.4% mineralization at 400 kJ m⁻² was achieved using the photocatalytic system WO₃/TiO₂-C. The improvement in the photocatalytic activity was attributed to the synergistic effect between carbon and WO₃ incorporated into the TiO₂ structure.     

Impact of quenching process on the surface defect of titanium dioxide for hydrogen production from photocatalytic decomposition of water

Nanocrystalline titania was prepared by solvothermal reaction of titanium butoxide in toluene at 300 °C for 2 h. Thus obtained-powder was calcined at 300 °C in box furnace for 1 h and then quenched in various media at different temperature. The physiochemical properties of samples were investigated by using X-ray diffraction (XRD), nitrogen adsorption, CO₂-Temperature Programmed Desorption (CO₂-TPD), UV–visible scanning spectrophotometer, Transmission electron microscopy (TEM) and electron spin resonance spectroscopy (ESR) techniques. All physical properties such as phase, BET surface area and crystal size were not changed after quenching processes. While the CO₂-TPD and ESR results indicate the changing of Ti³⁺ contents on the surface of TiO₂ after quenching process. The amounts of Ti³⁺ increased as the quenching temperature decreased. Photocatalytic decomposition of water was carried out to evaluate the catalytic activity of quenched TiO₂. The activity of quenched-powder increased corresponding to the increasing of Ti³⁺ contents increased by following order: air at 77 K > air at RT > air at 373 K > 30 wt% H₂O₂ at RT = 30 wt% H₂O₂ at 373 K > H₂O at RT > H₂O at 373 K.     

Microstructure and deposition mechanism of CVD amorphous boron carbide coatings deposited on SiC substrates at low temperature

Amorphous boron carbide (α-B₄C) coatings were prepared on SiC substrates by chemical vapor deposition (CVD) from CH₄/BCl₃/H₂/Ar mixtures at low temperature (900–1050 °C) and reduced pressure (10 kPa). The deposited coatings were characterized using scanning electron microscopy (SEM), X-ray diffraction (XRD), micro-Raman spectroscopy, energy dispersive X-ray spectroscopy (EDS) and X-ray photoelectron spectroscopy (XPS). The results showed that two kinds of α-B₄C coatings were deposited with different microstructures and phase compositions, and the effect of deposition temperature was significant. When deposited at 1000 °C and 1050 °C, the coatings exhibited a nodular morphology and had a relatively low content of boron. The free carbon was distributed in them inhomogeneously; in contrast, when deposited at 900 °C and 950 °C, the coatings presented a comparatively flat morphology and had a uniform internal structure and high boron content. They did not contain free carbon. At the last of this paper, the pertinent mechanisms resulting in differences in microstructure and phase composition were discussed.     

Combination of photocatalytic and photoelectro-Fenton/citrate processes for dye degradation using immobilized N-doped TiO2 nanoparticles and a cathode with carbon nanotubes: Central composite design optimization

In this report, commercial TiO₂ nanoparticles were doped with nitrogen by a manual grinding method using urea. The prepared catalyst was characterized by X-ray diffraction (XRD), diffuse reflectance spectra (DRS), and transmission electron microscopy (TEM). N-doped TiO₂ was immobilized on ceramic plates by methyl tri-methoxy silane. Next, multi-walled carbon nanotubes (CNTs) were stabilized on carbon paper to fabricate the cathode. Scanning electron microscopy (SEM) was employed to confirm stabilization of the CNTs. The prepared cathode and immobilized catalyst were utilized for the degradation of C.I. Direct Red 23 (DR23) by the photoelectro-Fenton (PEF) process in the presence of citrate (Cit) combined with a photocatalytic process. The coupled PEF/Cit/N-TiO₂ process could be performed under visible light, not only due to the formation of iron–citrate complexes, but also because of the incorporation of nitrogen to the crystalline structure of TiO₂ and the generation of TiO₂ complexes with electrogenerated H₂O₂. Results demonstrated that the degradation efficiency of DR23 (20 mg/L) using the identical operational conditions, followed a decreasing order of: PEF/Cit/N-TiO₂ > PEF/Cit > PEF > EF > N-TiO₂. Eventually, a model was developed by the central composite design (CCD) method, describing the degradation efficiency as a function of the operational parameters.     

Physical properties of V-doped TiO2 nanoparticles synthesized by sonochemical-assisted process

V-doped TiO₂ nanoparticles were synthesized by sonochemical process using titanium isopropoxide as a titanium source, vanadyl acetylacetonate as a dopant source. Sonication was conducted using sonic horn operated at 20 kHz for 20 min until the completely precipitated product was reached. The as-synthesized precipitates with various vanadium dopant (1–5 mol %) were calcined at 500–1000 °C for 4 h. The relevant physical properties of the nanoparticles were characterized by X-ray diffraction (XRD), Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), scanning electron microscope (SEM) and transmission electron microscope (TEM). The anatase phase TiO₂ nanoparticles can be synthesized by sonochemical process. Post calcinations process results in the anatase-to-rutile phase transformation and the enhancement in crystallinity with increasing temperature. The results also indicate good incorporation of V ions in TiO₂ lattices and significant effect of V dopant on alternation of interplanar spacing of TiO₂.     

Preparation and UV-shielding property of Zr0.7Ce0.3O2–kaolinite nanocomposites

Nanocomposites of Zr_0.7Ce_0.3O₂–kaolinite were prepared by two different methods. The first method was by solid mixing of kaolinite and Zr_0.7Ce_0.3O₂ (ZrCeO), the latter being prepared by a citric acid complexion method, using an agate pestle and mortar as the mixing medium. The second method was by adding kaolinite during the synthesis of Zr_0.7Ce_0.3O₂ (ZrCeO) itself. Kaolinite was obtained by the elutriation of tin tailing, which was then exfoliated by planetary ball milling with 40 mass% of urea for 1–5 h. The resulting nanocomposites were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), UV–vis spectrophotometry, Fourier transform infrared spectroscopy (FTIR), and specific surface area (SSA) determination using the BET (Brunauer–Emmett–Teller) method. The characterization results proved that kaolinite was successfully exfoliated by urea treatment after 5 h. It was also found that ZrCeO–exfoliated kaolinite nanocomposite, synthesized by the citric acid complexion method, without adding NH₃, showed the highest UV-shielding property of > 80% absorption ability for wavelength < 400 nm. This is better than pure ZrCeO, even at the lower content of ZrCeO in the nanocomposite (i.e. at 70 mass% content).     

In situ doping of diamond coatings with silicon,aluminum and titanium through a modified laser-based CVD process

The aim of this study was to demonstrate the feasibility of in situ doping of chemical vapor deposition (CVD) fabricated diamond coatings through simultaneous evaporation of solids in a CVD plasma-based process. In order to achieve maximum flexibility and energy density, a laser-based plasma-jet CVD process was chosen, and expanded with the introduction of dopant rods. The rods, with diameters varying from 0.5 mm to 3.0 mm, were fed at rates from 0.25 mm/min to > 100 mm/min, and positioned 3 mm below the optical breakthrough which generates the plasma. Gas flows of 20.0 slm (standard liters per min) argon, 2.0 slm hydrogen and 0.02 slm methane were used for diamond coating deposition. At a surface temperature of about 1100 °C, an average linear diamond growth rate of 20 μm/h was achieved. The materials selected as solid precursors for the rods were SiO₂, Al₂O₃, and Ti due to their differing electrical characteristics, as they are an insulator, semiconductor, and conductor, respectively. The evaporation rate of these rods varied by more than six orders of magnitude, from < 1 × 10^− 8 g/min (Ti) to > 7 × 10^− 2 g/min (SiO₂). The doped diamond coatings were produced by simultaneous evaporation and CVD. To prove that the precursors were vaporized and the atomic bonds were broken by the plasma, the optical emission spectra are compared with published and calculated spectral lines. Analyses of the layers were performed using EDX (energy-dispersive X-ray) spectroscopy and WDS (wavelength dispersive X-ray spectroscopy). As a result, the maximum doping densities in the diamond coating were determined, and were 3.460 wt.% for silicon, 0.957 wt.% for aluminum, and 0.03 wt.% for titanium. To prove the diamond-like characteristics of these coatings, Raman measurements were performed.     

Positively charged loose nanofiltration membrane grafted by diallyl dimethyl ammonium chloride (DADMAC) via UV for salt and dye removal

A novel positively charged loose nanofiltration (NF) membrane was fabricated feasibly by UV-induced photografting polymerization of diallyl dimethyl ammonium chloride (DADMAC) on Polysulfone ultrafiltration membrane. A possible reaction mechanism was proposed that a linear chain structure and/or pyrrole like five-membered nitrogen heterocycles structure on the side chain were grafted to form the active barrier layer. NF membrane demonstrated a looser average pore size of 8.6 nm and positive charges surface. Owing to the nanoscale ultrathin nanoscale barrier layer and the combination of Donnan exclusion and steric hindrance, NF membrane exhibited good hydrophilicity, a high pure flux of 60 L/m² h (0.5 MPa), a good salt rejection to Mg²⁺ (90.8%), Al³⁺ (94.0%), Ca²⁺ (91.5%), and a high dye rejection to methylene blue (99.4%) and congo red (100.0%) respectively. The salts rejection of NF membrane to different salts followed the order of AlCl₃ > CaCl₂ > MgCl₂ > NaCl > LiCl > MgSO₄ > Na₂SO_4. NF membrane showed certain fouling resistance to seawater and BSA solution. The grafting polymerization kinetics were comprehensively investigated including irradiation time, monomer concentration and irradiation intensity. X-ray Photoelectron Spectroscopy (XPS), scanning electron microscopy (SEM), atomic force microscopy (AFM) and contact angle measurement were employed to investigate membrane chemistry, morphologies, and hydrophilicity.     

Effect of substrate temperature on microstructure and optical properties of nanocrystalline alumina thin films

Aluminum oxide (Al₂O₃) thin films were deposited on silicon (100) and quartz substrates by pulsed laser deposition (PLD) at an optimized oxygen partial pressure of 3.0×10^?3 mbar in the substrate temperatures range 300–973 K. The films were characterized by X-ray diffraction, transmission electron microscopy, atomic force microscopy, spectroscopic ellipsometry, UV–visible spectroscopy and nanoindentation. The X-ray diffraction studies showed that the films deposited at low substrate temperatures (300–673 K) were amorphous Al₂O₃, whereas those deposited at higher temperatures (≥773 K) were polycrystalline cubic γ-Al₂O₃. The transmission electron microscopy studies of the film prepared at 673 K, showed diffuse ring pattern indicating the amorphous nature of Al₂O₃. The surface morphology of the films was examined by atomic force microscopy showing dense and uniform nanostructures with increased surface roughness from 0.3 to 2.3 nm with increasing substrate temperature. The optical studies were carried out by ellipsometry in the energy range 1.5–5.5 eV and revealed that the refractive index increased from 1.69 to 1.75 (λ=632.8 nm) with increasing substrate temperature. The UV–visible spectroscopy analysis indicated higher transmittance (>80%) for all the films. Nanoindentation studies revealed the hardness values of 20.8 and 24.7 GPa for the films prepared at 300 K and 973 K respectively.     

Effect of strontium and cerium doping on the structural characteristics and catalytic activity for C3H6 combustion of perovskite LaCrO3 prepared by sol–gel

Two series of Sr- or Ce-doped La_1−xM_xCrO₃ (x = 0.0, 0.1, 0.2 and 0.3) catalysts were prepared by thermal decomposition of amorphous citrate precursors followed by annealing at 800 °C in air atmosphere. The effect of Ce and Sr on the morphological/structural properties of LaCrO₃ was investigated by means of thermogravimetric/differential thermal analysis (TG/DTA) of the precursors decomposition under air, X-ray diffraction (XRD), electron paramagnetic resonance (EPR), transmission electron microscopy–X-ray energy dispersive spectroscopy (TEM–XEDS), S_BET determination, scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS) techniques. The characterization results are employed to explain catalytic activity results for C₃H₆ combustion. It is shown that the lanthanum chromite perovskite structure is obtained upon thermal treatment of the sol–gel derived precursors at T > ca. 800 °C. The presence of the dopant generally induces the formation of segregated oxide phases in the samples calcined at 800 °C although some introduction of the Sr in the perovskite structure is inferred from EPR measurements. The oxidation activity becomes maximised upon formation of such doped perovskite structure.     

Formation of anatase TiO2 nanoparticles by simple polymer gel technique and their properties

Pure anatase nano-TiO₂ powders were successfully prepared by a simple polymer gel technique using poly-(vinylpyrrolidone) (PVP) as the polymer. The products were systematically characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), field-emission scanning electron microscopy (FE-SEM), high resolution transmission electron microscopy (HR-TEM), UV–visible spectroscopy and photoluminescence studies. The XRD and XPS results indicate that the prepared powder had a pure anatase nano-TiO₂ structure with lattice parameters a and c of 0.378 and 0.951 nm, respectively. The particle size analysed by TEM ranged between 7 and 12 nm. The maximum UV absorption for the TiO₂ nanoparticles was below 400 nm with an estimated direct band gap (Eg) of 3.55 eV. The photoluminescence peaks of the nanopowder were observed at 391 and 468 nm. The nanosized materials were produced using a simple and cost effective polymer gel technique.     

Evaluation of water treatment sludge as a catalyst for aqueous ozone decomposition

A new, novel, efficient, and stable green catalyst has been successfully used as a catalyst in aqueous ozone decomposition in acidic medium. The catalyst was characterized by using X-ray fluorescence (XRF), transmission electron microscope (TEM), scanning electron microscope (SEM), and X-ray diffraction (XRD) techniques. The sludge mainly consists of various metal and non-metal oxides. The effect of various experimental parameters such as catalyst loading, initial ozone concentrations, and various metal oxide catalysts on the decomposition of ozone was investigated. The decomposition of dissolved ozone was substantially enhanced by increasing the catalyst loading from 125 to 750 mg and by increasing the initial ozone concentration. The ozone decomposition efficiencies of Al₂O₃, SiO₂, TiO₂, Fe₂O₃, ZnO, and sludge have been studied and the efficiencies of these catalysts were found to be in the following order: ZnO ≈ sludge > TiO₂ > SiO₂ > Al₂O₃ ≈ Fe₂O₃. The catalytic stability was also investigated for up to four successive cycles and it was found that the catalyst was stable and ozone did not affect the catalyst morphology and its composition. However, the surface area of the catalyst increased after 1st cycle then it became stable. It was concluded that the sludge powder used in this study was a promising catalyst for aqueous ozone decomposition.     

Synthesis and catalytic properties of novel POM@TiO2 composite materials

Donor–π-bridge–acceptor (D–π–A) type polyoxometalates (POMs) were self-assembled for the first time on the surface of titanium dioxide (TiO₂) nanoparticles through the layer-by-layer (LBL) method. The obtained composite materials POM@TiO₂ were characterized by Transmission electron microscopy (TEM), Fourier transform IR spectroscopy (FTIR), Raman spectrum and energy dispersive X-ray (EDX) spectroscopy. Catalytic properties of POM@TiO₂ were also investigated by treating organic pollutants (typically, removal of 40 mL 20 mg L^− 1 methylene blue (MB) by 10 mg POM@TiO₂ was up to 99.5% within 3 min under ambient conditions and the photodegradation efficiency was obviously higher than bare TiO₂ nanoparticles under irradiation).     

The electrocatalytic properties of an IrO2/SnO2 catalyst using SnO2 as a support and an assisting reagent for the oxygen evolution reaction

Electrocatalysts made of IrO₂/SnO₂ were prepared using the Adams method for solid polymer electrolyte (SPE) water electrolysis. The physicochemical properties of the catalyst were characterized via X-ray diffraction (XRD) and transmission electron microscopy (TEM). The electrochemical properties of the catalyst were investigated using cyclic voltammetry (CV), electrochemical impendence spectroscopy (EIS), chronopotentiometry and Tafel curve measurements in 0.1 mol L^?1 H₂SO₄ at room temperature. The test results showed that the catalytic properties of IrO₂/SnO₂ depended on the mass ratio of iridium to tin, and that the optimal mass ratio was 2:1. The optimized catalyst was applied to a membrane electrode assembly (MEA), and the stationary current–potential relationships were determined. With an IrO₂/SnO₂ (2:1) anode, a 40% Pt/C cathode and a total noble metal (Ir, Pt) loading of 1.2 mg cm^?2, the terminal applied potential difference of the water electrolysis was 1.70 V at 2 A cm^?2 and 80 °C.     

Synthesis,structures and properties of cobalt(II) and copper(I) complexes of 2,6-diamino-3-[(2-carboxymethyl)phenylazo]-pyridine

The reaction of methyl anthranilate, sodium nitrite, and 2,6-diamino-pyridine affords a new compound, 2,6-diamino-3-[(2-carboxymethyl) phenylazo]-pyridine (L), which has been characterized with X-ray crystallography and NMR spectrum. The reaction of L and CoCl₂? 6H₂O or Cu(ClO₄)₂? 6H₂O gives a dinuclear cobalt(II) complex [Co₂L₂Cl₃]Cl (1), and a copper(I) complex [CuL₂]ClO₄ (2),respectively. They are characterized by X-ray crystallography, X-ray photoelectron spectroscopy, NMR spectra, magnetic measurement and emission spectra. Magnetic behavior of 1 denotes the occurrence of intramolecular antiferromagnetic interactions (J = ? 141.8 cm^? 1). Complex 2 exhibits photoluminescence at 557 nm.     

Nitridation of silicon powder studied by XRD, 29Si MAS NMR and surface analysis techniques

The nitridation of elemental silicon powder at 900–1475 °C was studied by X-ray photoelectron spectroscopy (XPS), X-ray excited Auger electron spectroscopy (XAES), XRD, thermal analysis and ²⁹Si MAS NMR. An initial mass gain of about 12% at 1250–1300 °C corresponds to the formation of a product layer about 0·2 μm thick (assuming spherical particles). XPS and XAES show that in this temperature range, the surface atomic ratio of N/Si increases and the ratio O/Si decreases as the surface layer is converted to Si₂N₂O. XRD shows that above 1300 °C the Si is rapidly converted to a mixture of α- and β-Si₃N₄, the latter predominating >1400 °C. In this temperature range there are only slight changes in the composition of the surface material, which at the higher temperatures regains a small amount of an oxidised surface layer. By contrast, in the interval 1400–1475 °C, the ²⁹Si MAS NMR chemical shift of the elemental Si changes progressively from about −80 ppm to −70 ppm, in tandem with the growth of the Si₃N₄ resonance at about −48 ppm. Possible reasons for this previously unreported change in the Si chemical shift are discussed. ©     

Significant improvement in the electrochemical performances of nano-nest like amorphous MnO2 electrodes due to Fe doping

Amorphous and highly porous nanonest like Fe:MnO₂ thin films have been potentiostatically synthesized and are characterized by using X-ray diffraction (XRD), Field emission scanning electron microscopy (FESEM), Energy dispersive X-ray analysis (EDAX), Fourier transform infrared spectroscopy (FTIR), wettability test and optical properties. The supercapacitive performance of Fe:MnO₂ electrodes were tested using cyclic voltammetry (CV), charge–discharge and impedance techniques in 1 M Na₂SO₄ electrolyte. The effect of Fe doping on structural, morphological, compositional and supercapacitive properties of MnO₂ thin films has been investigated. Further, the effect of electrolyte concentration and scan rate on the supercapacitance of MnO₂ and Fe:MnO₂ electrodes have been studied. The results showed that as Fe doping concentration increases up to 2 at% the supercapacitance increases from 166 to 231 F g^?1. The maximum specific capacitance of 273 F g^?1 was achieved for 2 at% Fe:MnO₂ at 5 mV s^?1 scan rate.     

Synthesis of nitrogen-doped porous graphitic carbons using nano-CaCO3 as template,graphitization catalyst,and activating agent

Nitrogen-doped porous graphitic carbons (NPGCs) with controlled structures were synthesized using cheap nano-CaCO₃ as template, melamine-formaldehyde resin as carbon precursor, and dilute HCl as template removing agent. In addition to its use as a template, the nano-CaCO₃ acted as an internal activating agent to produce micro- and mesopores, as an adsorbent to remove the released hazardous gases (i.e. HCN, NH₃), and as a mild graphitization catalyst. The obtained NPGCs with hierarchical nanopores contained as high as 20.9 wt% of nitrogen, had surface areas of up to 834 m² g^–1, and also exhibited high thermal stability with respect to oxidation. Using carbohydrate or phenolic resin as the carbon precursor, this simple approach was also capable of producing hierarchical porous graphitic carbons with high surface area (up to 1683 m² g^–1) and extremely large pore volumes (>6 cm³ g^–1). X-ray diffraction and infrared spectroscopy suggested that the intermediate CaCN₂ or CaC₂ generated during the carbonization plays a critical role in the formation of the graphitic structure.     

Role of MgO on the HAp forming ability in phosphate based glasses

Phosphate-based glasses 45P₂O₅–30CaO–(25 ? x)Na₂O–xMgO for different compositions of x = 0, 1, 2.5, 5 and 10 mol% were prepared using the normal melt quench technique. To study the influence of MgO on phosphate glasses, a series of experimental analyses such as ultrasonic velocities, differential thermal analysis, X-ray diffraction, energy-dispersive X-ray spectroscopy, pH measurements, Fourier transform infrared spectroscopy, scanning electron microscopy and in vitro studies were carried out in all the prepared glasses. A maxima in ultrasonic parameters at x = 2.5 mol% of MgO content and a further decrease in the same with the addition of MgO content were observed in all glasses. The observed results indicate that structural compactness of glass network took place up to 2.5 mol% of MgO (PCNM2.5), beyond which a loose packing of atoms led to structural softening in glass network. The results obtained from X-ray diffraction, Fourier transform infrared spectroscopy and scanning electron microscopy analyses in all glasses before and after in vitro studies revealed the existence of higher HAp-forming ability in PCNM2.5 glass.