跨层设计下的单跳WSN能量有效MAC协议

WSN（无线传感网）的MAC协议对于能量有效性有一定要求,现有的MAC协议多数以仅在必要时开启射频的方式实现。这一方式主要目标是解决数据汇聚的问题,即在唤醒状态的数据收发．但同时忽略了时延等其它重要的网络性能。文章将基于TinyOS和MLA（MAC层次结构）实现一种异步冲突避免的单跳MAC（媒体接入控制）协议,网络采用星形拓扑．汇聚节点无能耗限制。这一MAC协议将端节点能耗视为主要性能指标,同时以复合方式收集数据,接收汇聚节点查询,并尽可能降低查询结果发送时延。     

无线传感网混合类MAC协议研究综述

在无线传感网( WSN)体系结构中,介质访问控制( MAC)协议负责调配网络中节点的信道接入,具有保障网络高效通信的重要作用。混合类MAC 协议综合了竞争类MAC 协议以及调度类MAC协议的特点,在融合两种机制的优点的同时克服其缺点,为无线信道资源的分配提供了更加灵活和全面的策略。首先概述了无线传感网MAC协议设计要点及分类,然后重点分析了无线传感网中经典的混合类MAC协议及国内外前沿的研究进展,并进一步归纳对比了各协议运行机制、性能及不足,得出混合类MAC协议的应用相关性及差异性的结论,最后总结了无线传感网混合类MAC协议研究现状并指出了未来的研究重点,以期为相关领域的研究人员提供参考。     

分簇无线传感器网络动态时隙分配MAC协议

为降低大规模无线传感器网络的平均能耗,提出了一种基于动态分配的调度型无线传感器网络MAC协议（SDC-MAC）。该协议簇间使用FDMA方式分配无线信道,簇内通过TDMA方式给各个节点分配可变长的时隙。随着簇结构的变化,簇头通过时隙分配通知,对簇内节点的时隙分配进行动态调整,簇成员节点则根据控制信息进行休眠和唤醒。仿真结果显示,该算法有效地降低了网络的平均能耗,当网络流量高时还可降低平均数据包时延。     

无线传感网络MAC层的节能协议S-MAC性能研究

能耗是无线传感网络研究的核心问题,也是其网络性能重要参数之一.WSNs节点的生存周期主要取决于节点的能量消耗,针对无线传感网络WSNs低速率的特点,本文对其网络节点能耗做了分析研究,讨论无线传感网络MAC层的能耗管理与节能措施,从周期性监听和睡眠,冲突和串音避免,长信息传递等方面介绍与分析了S-MAC协议在WSNs中节能的合理性与实用性.     

一种无线传感网络节能MAC协议

在无线传感网络中,传感节点是能量受限的,因此能耗在这种网络显得十分重要,关系到整个网络的生命周期与性能.而无线传感网络的MAC协议对节点的节能有着重要的作用.本文在已有研究的基础上加以改进形成一种更有效的感知流量信息进行节能的MAC协议.该协议同S-MAC协议一样也是采用睡眠的机制,但不同于S-MAC的是该协议中监听与...     

无线传感网规则拓扑结构的部署与设计综述

在无线传感网应用中部署规则拓扑结构能实现感知区域的完全覆盖和采集点的精确定位,以较小的部署代价提供更好的网络性能,为无线传感网的优化设计提供参照依据,对规则拓扑结构的相关研究进行综述。基于节点有效面积这个指标,探讨了完全覆盖、k-覆盖、l-连通情况下的拓扑部署方式与效能,并从连通性、能耗、传输性能、路由方案和MAC协议等方面总结了典型规则拓扑结构的性能、变化规律和适用范围。指出了各结构的最佳适用条件,并提出了若干有待进一步研究的方向。     

交通路灯监控系统的无线传感网链状路由算法

在交通路灯监控系统中为节省网络节点能耗和降低数据传输时延,提出一种无线传感网链状路由算法(CRASMS)。该算法根据节点和监控区域的信息将监控区域分成若干个簇区域,在每一个簇区域中依次循环选择某个节点为簇头节点,通过簇头节点和传感节点的通信建立簇内星型网络,最终簇头节点接收传感节点数据,采用数据融合算法降低数据冗余,通过簇头节点间的多跳路由将数据传输到Sink节点并将用户端的指令传输到被控节点。仿真结果表明,CRASMS算法保持了PEGASIS算法在节点能耗方面和LEACH算法在传输时延方面的优点,克服了PEGASIS算法在传输时延方面和LEACH算法在节点能耗方面的不足,将网络平均节点能耗和平均数据传输时延保持在较低水平。在一定的条件下,CRASMS算法比LEACH和PEGASIS算法更优。     

交通路灯监控系统的无线传感网链状路由算法

在交通路灯监控系统中为节省网络节点能耗和降低数据传输时延,提出一种无线传感网链状路由算法（CRASMS）。该算法根据节点和监控区域的信息将监控区域分成若干个簇区域,在每一个簇区域中依次循环选择某个节点为簇头节点,通过簇头节点和传感节点的通信建立簇内星型网络,最终簇头节点接收传感节点数据,采用数据融合算法降低数据冗余,通过簇头节点间的多跳路由将数据传输到Sink节点并将用户端的指令传输到被控节点。仿真结果表明：CRASMS算法保持了PEGASIS算法在节点能耗方面和LEACH算法在传输时延方面的优点,克服了PEGASIS 算法在传输时延方面和LEACH算法在节点能耗方面的不足,将网络平均节点能耗和平均数据传输时延保持在较低水平。在一定的条件下,CRASMS算法比LEACH和PEGASIS算法更优。     

低WSN服务能耗的MAC协议实现

为解决WSN服务能耗和服务质量问题,提出了一种无线传感器网络介质访问控制协议WTRP-S,分析比较了WTRP-S,WTRP和IEEE802.15.4MAC的性能,建立了节点启动调度模型。仿真结果表明:在数据业务大的网络中,该协议既能保证服务质量,在节点关闭通信模块中能够节省更多能量,使得整体能耗降低,WTRP-S适用于能量受限的无线传感器网络。     

基于网格的移动无线传感网生存时间优化算法

为克服陆地静态无线传感网和水下无线传感网因节点能耗分布不均衡而出现的能量空穴问题,和具有单一移动Sink节点的无线传感网数据收集时延过长问题,该文提出基于网格的移动无线传感网生存时间优化算法(Grid-based Lifetime Optimization Algorithm,GLOA)。GLOA算法考虑多个Sink节点的移动,将监测区域分成多个大小相同的网格。根据网格潜能值确定Sink节点移动的锚点,将锚点分配给不同的Sink节点,建立路径选择优化模型并获得Sink节点的最短移动路径,采用移动收集方法或静态收集方法循环收集数据。仿真结果表明:与Ratio_w或TPGF算法相比,GLOA算法能延长网络生存时间,降低和均衡节点能耗。与LOA_SMSN算法相比,GLOA算法能降低数据收集时延。在一定的条件下,比Ratio_w,TPGF和LOA_SMSN算法更优。     

Resolution Enhancement Technology:Integrated Process Solutions using OPC

DUV lithography, using the 248 nm wavelength, is a viable manufacturing option for devices with features at 130 nm and less. Given the low kl value of the lithography, integrated process development is a necessary method for achieving acceptable process latitude. The application of assist features for rule based OPC requires the simultaneous optimization of the mask, illumination optics and the resist.Described in this paper are the details involved in optimizing each of these aspects for line and space imaging.A reference pitch is first chosen to determine how the optics will be set. The ideal sigma setting is determined by a simple geometrically derived expression. The inner and outer machine settings are determined, in turn,with the simulation of a figure of merit. The maximum value of the response surface of this FOM occurs at the optimal sigma settings. Experimental confirmation of this is shown in the paper.Assist features are used to modify the aerial image of the more isolated images on the mask. The effect that the diffraction of the scattering bars (SBs) has on the image intensity distribution is explained. Rules for determining the size and placement of SBs are also given.Resist is optimized for use with off-axis illumination and assist features. A general explanation of the material' s effect is discussed along with the affect on the through-pitch bias. The paper culminates with the showing of the lithographic results from the fully optimized system.     

Cost-effective test solutions for smart card and other integrated flash applications

From its emergence in the late 1980s as a lower cost alternative to early EEPROM technologies, flash memory has evolved to higher densities and speedsand rapidly growing acceptance in mobile applications.In the process, flash memory devices have placed increased test requirements on manufacturers. Today, as flash device test grows in importance in China, manufacturers face growing pressure for reduced cost-oftest, increased throughput and greater return on investment for test equipment. At the same time, the move to integrated flash packages for contactless smart card applications adds a significant further challenge to manufacturers seeking rapid, low-cost test.     

Theoretical analysis of the relationship between the Brillouin gain coefficient and the strain in the optical-fiber sensors

The relation between the power of the Brillouin signal and the strain is one of the bases of the distributed fiber sensors of temperature and strain. The coefficient of the Bfillouin gain can be changed by the temperature and the strain that will affect the power of the Brillouin scattering. The relation between the change of the Brillouin gain coefficient and the strain is thought to be linear by many researchers. However, it is not always linear based on the theoretical analysis and numerical simulation. Therefore, errors will be caused if the relation between the change of the Brillouin gain coefficient and the strain is regarded as to be linear approximately for measuring the temperature and the strain. For this reason, the influence of the parameters on the Brillouin gain coefficient is proposed through theoretical analysis and numerical simulation.     

An improved parallel thinning algorithm with two subiterations

The parallel thinning algorithm with two subiterations is improved in this paper. By analyzing the notions of connected components and passes, a conclusion is drawn that the number of passes and the number of eight-connected components are equal. Then the expression of the number of eight-connected components is obtained which replaces the old one in the algorithm. And a reserving condition is proposed by experiments, which alleviates the excess deletion where a diagonal line and a beeline intersect. The experimental results demonstrate that the thinned curve is almost located in the middle of the original curve connectivelv with single pixel width and the processing speed is high.     

Novel fiber-optical interferometer with miniaturized probe for in-hole measurements

Today, micro-system technology and the development of new MEMS （Micro-Electro-Mechanical Systems） are emerging rapidly. In order for this development to become a success in the long run, measurement systems have to ensure product quality. Most often, MEMS have to be tested by means of functionality or destructive tests. One reason for this is that there are no suitable systems or sensing probes available which can be used for the measurement of quasi inaccessible features like small holes or cavities. We present a measurement system that could be used for these kinds of measurements. The system combines a fiber optical, miniaturized sensing probe with low-coherence interferometry, so that absolute distance measurements with nanometer accuracy are possible.     

Development of the readout system for waveguide multilayer optical card

Waveguide multilayer optical card （WMOC） is a novel storage device of three-dimensional optical information. An advanced readout system fitting for the WMOC is introduced in this paper. The hardware mainly consists of the light source for reading, WMOC, motorized stages addressing unit, microscope imaging unit, CCD detecting unit and PC controlling ＆ processing unit. The movement of the precision motorized stage is controlled by the computer through Visual Basic （VB） language in software. A control panel is also designed to get the layer address and the page address through which the position of the motorized stages can be changed. The WMOC readout system is easy to manage and the readout result is directly displayed on computer monitor.     

Study of waveguide coupling efficiency in hybrid silicon lasers

This paper presents a new method to increase the waveguide coupling efficiency in hybrid silicon lasers. We find that the propagation constant of the InGaAsP emitting layer can be equal to that of the Si resonant layer through improving the design size of the InP waveguide. The coupling power achieves 42% of the total power in the hybrid lasers when the thickness of the bonding layer is 100 nm. Our result is very close to 50% of the total power reported by Intel when the thickness of the thin bonding layer is less than 5 nm. Therefore, our invariable coupling power technique is simpler than Intel＇s.     

Collinear phase-matching study of terahertz-wave generation via difference frequency mixed in GaAs and Inp

The collinearly phase-matching condition of terahertz-wave generation via difference frequency mixed in GaAs and InP is theoretically studied. In collinear phase-matching, the optimum phase-matching wave hands of these two crystals are calculated. The optimum phase-matching wave bands in GaAs and lnP are 0.95-1.38μm and 0.7-0.96μm respectively. The influence of the wavelength choice of the pump wave on the coherent length in THz-wave tuning is also discussed. The influence of the temperature alteration on the phase-matching and the temperature tuning properties in GaAs crystal are calculated and analyzed. It can serve for the following experiments as a theoretical evidence and a reference as well.     

Effects of the alloy compositions on the phonon-polaritons in ternary mixed crystals

Composition dependence of bulk and surface phonon-polaritons in ternary mixed crystals are studied in the framework of the modified random-element-isodisplacement model and the Bom-Huang approximation. The numerical results for Several Ⅱ - Ⅵ and Ⅲ- Ⅴ compound systems are performed, and the polariton frequencies as functions of the compositions for ternary mixed crystals AlxGa1-xAs, GaPxAS1-x, ZnSxSe1-x, GaAsxSb1-x, GaxIn1-xP, and ZnxCd1-xS as examples are given and discussed. The results show that the dependence of the energies of two branches of bulk phonon-polaritons which have phonon-like characteristics, and surface phonon-polaritons on the compositions of ternary mixed crystals are nonlinear and different from those of the corresponding binary systems.     

New insert layer structure OLEDs

An insert layer structure organic electroluminescent device（OLED） based on a new luminescent material （Zn（salen）） is fabricated. The configuration of the device is ITO/CuPc/NPD/Zn（salen）/Liq/LiF/A1/CuPc/NPD/Zn（salen）/Liq/LiF/A1. Effective insert electrode layers comprising LiF（1nm）/Al（5 nm） are used as a single semitransparent mirror, and bilayer cathode LiF（1 nm）/A1（100 nm） is used as a reflecting mirror. The two mirrors form a Fabry-Perot microcavity and two emissive units. The maximum brightness and luminous efficiency reach 674 cd/m^2 and 2.652 cd/A, respectively, which are 2.1 and 3.7 times higher than the conventional device, respectively. The superior brightness and luminous efficiency over conventional single-unit devices are attributed to microcavity effect.