Enhanced Charge Transportation in Semiconducting Polymer/Insulating Polymer Composites: The Role of an Interpenetrating Bulk Interface

The charge transportation in poly(3‐butylthiophene) (P3BT)/insulating polymer composites is studied both microscopically and macroscopically. The increased mobility of free charge carriers, in particular hole mobility, contributes to the enhanced electrical conductivity of this semiconductor/insulator composite. The conductivity origin of the composite, as revealed by conductive‐atomic force microscopy (C‐AFM), comes mainly from the P3BT network, whose carrier mobility has been improved as a result of reduced activation energy for charge transportation upon forming an interface with the insulating matrix. Both the huge interfacial area and interconnected conductive component are morphologically required for the enhanced electrical property of the composite. An increased size of the P3BT domains, which correspondingly reduces the interfacial area between the two components, ruins the enhancement. This study clarifies the mechanism of the higher electrical properties achieved in a semiconducting polymer upon blending with an insulating polymer, which will further promote the development of these low‐cost, easily processable, and environmentally stable composites.     

Anisotropic Structure and Charge Transport in Highly Strain‐Aligned Regioregular Poly(3‐hexylthiophene)

A novel method of strain‐aligning polymer films is introduced and applied to regioregular poly(3‐hexylthiophene) (P3HT), showing several important features of charge transport. The polymer backbone is shown to align in the direction of applied strain resulting in a large charge‐mobility anisotropy, where the in‐plane mobility increases in the applied strain direction and decreases in the perpendicular direction. In the aligned film, the hole mobility is successfully represented by a two‐dimensional tensor, suggesting that charge transport parallel to the polymer backbone within a P3HT crystal is strongly favored over the other crystallographic directions. Hole mobility parallel to the backbone is shown to be high for a mixture of plane‐on and edge‐on packing configurations, as the strain alignment is found to induce a significant face‐on orientation of the originally highly edge‐on oriented crystalline regions of the film. This alignment approach can achieve an optical dichroic ratio of 4.8 and a charge‐mobility anisotropy of 9, providing a simple and effective method to investigate charge‐transport mechanisms in polymer semiconductors.     

Alkyl‐Chain‐Length‐Independent Hole Mobility via Morphological Control with Poly(3‐alkylthiophene) Nanofibers

The field‐effect transistor (FET) and diode characteristics of poly(3‐alkylthiophene) (P3AT) nanofiber layers deposited from nanofiber dispersions are presented and compared with those of layers deposited from molecularly dissolved polymer solutions in chlorobenzene. The P3AT n‐alkyl‐side‐chain length was varied from 4 to 9 carbon atoms. The hole mobilities are correlated with the interface and bulk morphology of the layers as determined by UV–vis spectroscopy, transmission electron microscopy (TEM) with selected area electron diffraction (SAED), atomic force microscopy (AFM), and polarized carbon K‐edge near edge X‐ray absorption fine structure (NEXAFS) spectroscopy. The latter technique reveals the average polymer orientation in the accumulation region of the FET at the interface with the SiO₂ gate dielectric. The previously observed alkyl‐chain‐length‐dependence of the FET mobility in P3AT films results from differences in molecular ordering and orientation at the dielectric/semiconductor interface, and it is concluded that side‐chain length does not determine the intrinsic mobility of P3ATs, but rather the alkyl chain length of P3ATs influences FET diode mobility only through changes in interfacial bulk ordering in solution processed films.     

Morphological Origin of Charge Transport Anisotropy in Aligned Polythiophene Thin Films

The morphological origin of anisotropic charge transport in uniaxially strain aligned poly(3‐hexylthiophene) (P3HT) films is investigated. The macroscale field effect mobility anisotropy is measured in an organic thin film transistor (OTFT) configuration and compared to the local aggregate P3HT mobility anisotropy determined using time‐resolved microwave conductivity (TRMC) measurements. The field effect mobility anisotropy in highly aligned P3HT films is substantially higher than the local mobility anisotropy in the aggregate P3HT. This difference is attributed to preferentially aligned polymer tie‐chains at grain boundaries that contribute to macroscale charge transport anisotropy but not the local anisotropy. The formation of sharp grains between oriented crystalline P3HT, through tie chain removal by thermal annealing the strained aligned films, results in an order of magnitude drop in the measured field effect mobility for charge transport parallel to the strain direction. The field effect mobility anisotropy is cut in half while the local mobility anisotropy remains relatively constant. The local mobility anisotropy is found to be surprisingly low in the aligned films, suggesting that the π?π stacking direction supports charge carrier mobility on the same order of magnitude as that in the intrachain direction, possibly due to poor intrachain mobility through chain torsion.     

Metal–Insulator–Semiconductor Coaxial Microfibers Based on Self‐Organization of Organic Semiconductor:Polymer Blend for Weavable,Fibriform Organic Field‐Effect Transistors

With the increasing importance of electronic textiles as an ideal platform for wearable electronic devices, requirements for the development of functional electronic fibers with multilayered structures are increasing. In this paper, metal–polymer insulator–organic semiconductor (MIS) coaxial microfibers using the self‐organization of organic semiconductor:insulating polymer blends for weavable, fibriform organic field‐effect transistors (FETs) are demonstrated. A holistic process for MIS coaxial microfiber fabrication, including surface modification of gold microfiber thin‐film coating on the microfiber using a die‐coating system, and the self‐organization of organic semiconductor–insulator polymer blend is presented. Vertical phase‐separation of the organic semiconductor:insulating polymer blend film wrapping the metal microfibers provides a coaxial bilayer structure of gate dielectric (inside) and organic semiconductor (outside) with intimate interfacial contact. It is determined that the fibriform FETs based on MIS coaxial microfiber exhibit good charge carrier mobilities that approach the values of typical devices with planar substrate. It additionally exhibits electrical property uniformity over the entire fiber surface and improved bending durability. Fibriform organic FET embedded in a textile is demonstrated by weaving MIS coaxial microfibers with cotton and conducting threads, which verifies the feasibility of MIS coaxial microfiber for use in electronic textile applications.     

One‐Step Macroscopic Alignment of Conjugated Polymer Systems by Epitaxial Crystallization during Spin‐Coating

The one‐step preparation of highly anisotropic polymer semiconductor thin films directly from solution is demonstrated. The conjugated polymer poly(3‐hexylthiophene) (P3HT) as well as P3HT:fullerene bulk–heterojunction blends can be spin‐coated from a mixture of the crystallizable solvent 1,3,5‐trichlorobenzene (TCB) and a second carrier solvent such as chlorobenzene. Solidification is initiated by growth of macroscopic TCB spherulites followed by epitaxial crystallization of P3HT on TCB crystals. Subsequent sublimation of TCB leaves behind a replica of the original TCB spherulites. Thus, highly ordered thin films are obtained, which feature square‐centimeter‐sized domains that are composed of one spherulite‐like structure each. A combination of optical microscopy and polarized photoluminescence spectroscopy reveals radial alignment of the polymer backbone in case of P3HT, whereas P3HT:fullerene blends display a tangential orientation with respect to the center of spherulite‐like structures. Moreover, grazing‐incidence wide‐angle X‐ray scattering reveals an increased relative degree of crystallinity and predominantly flat‐on conformation of P3HT crystallites in the blend. The use of other processing methods such as dip‐coating is also feasible and offers uniaxial orientation of the macromolecule. Finally, the applicability of this method to a variety of other semi‐crystalline conjugated polymer systems is established. Those include other poly(3‐alkylthiophene)s, two polyfluorenes, the low band‐gap polymer PCPDTBT, a diketopyrrolopyrrole (DPP) small molecule as well as a number of polymer:fullerene and polymer:polymer blends.     

Mechanism of Crystallization and Implications for Charge Transport in Poly(3‐ethylhexylthiophene) Thin Films

In this work, crystallization kinetics and aggregate growth of poly(3‐ethylhexylthiophene) (P3EHT) thin films are studied as a function of film thickness. X‐ray diffraction and optical absorption show that individual aggregates and crystallites grow anisotropically and mostly along only two packing directions: the alkyl stacking and the polymer chain backbone direction. Further, it is also determined that crystallization kinetics is limited by the reorganization of polymer chains and depends strongly on the film thickness and average molecular weight. Time‐dependent, field‐effect hole mobilities in thin films reveal a percolation threshold for both low and high molecular weight P3EHT. Structural analysis reveals that charge percolation requires bridged aggregates separated by a distance of ≈2–3 nm, which is on the order of the polymer persistence length. These results thus highlight the importance of tie molecules and inter‐aggregate distance in supporting charge percolation in semiconducting polymer thin films. The study as a whole also demonstrates that P3EHT is an ideal model system for polythiophenes and should prove to be useful for future investigations into crystallization kinetics.     

Mapping of Domain Orientation and Molecular Order in Polycrystalline Semiconducting Polymer Films with Soft X‐Ray Microscopy

We utilize scanning transmission X‐ray microscopy (STXM) to study the domain structure of polycrystalline films of the semiconducting polymer poly(9,9’‐dioctylfluorene‐co‐benzothiadiazole) (F8BT). By taking several images at different orientations of the film with respect to the polarization of the X‐ray beam, we are able to compute quantitative maps of molecular alignment/order and molecular orientation, including both the backbone direction and phenyl ring plane orientation, as well as the in‐plane and out‐of‐plane components. We show that polycrystalline F8BT films consist of well‐ordered micron‐sized domains with the transition from one domain orientation to another characterized either by a smooth transition of orientation or by ～ 200 nm wide disordered domain boundaries. The morphology of the disordered domain boundaries resemble the electroluminescence patterns observed previously in F8BT light‐emitting field‐effect transistors suggesting that charge trapping at these disordered domain boundaries facilitates charge recombination in ambipolar operation. A relatively narrow distribution of local average tilt angles is observed that correlates with film structure, with the ordered domains in general showing a higher tilt angle than the disordered domain boundaries. We also use secondary electron detection to image the surface domain structure of polycrystalline F8BT films and demonstrate that the polycrystalline structure extends to the film/air interface. Finally, we calculate ideal NEXAFS spectra corresponding to a perfect F8BT crystal oriented with the 1s – π^* transition dipole moment parallel and perpendicular to the electric field vector of a perfectly linearly polarized X‐ray beam.     

Inkjet‐Printed Single‐Droplet Organic Transistors Based on Semiconductor Nanowires Embedded in Insulating Polymers

Fabrication of organic field‐effect transistors (OFETs) using a high‐throughput printing process has garnered tremendous interest for realizing low‐cost and large‐area flexible electronic devices. Printing of organic semiconductors for active layer of transistor is one of the most critical steps for achieving this goal. The charge carrier transport behavior in this layer, dictated by the crystalline microstructure and molecular orientations of the organic semiconductor, determines the transistor performance. Here, it is demonstrated that an inkjet‐printed single‐droplet of a semiconducting/insulating polymer blend holds substantial promise as a means for implementing direct‐write fabrication of organic transistors. Control of the solubility of the semiconducting component in a blend solution can yield an inkjet‐printed single‐droplet blend film characterized by a semiconductor nanowire network embedded in an insulating polymer matrix. The inkjet‐printed blend films having this unique structure provide effective pathways for charge carrier transport through semiconductor nanowires, as well as significantly improve the on‐off current ratio and the environmental stability of the printed transistors.     

Effect of Alkyl Side‐Chain Length on Photovoltaic Properties of Poly(3‐alkylthiophene)/PCBM Bulk Heterojunctions

The morphological, bipolar charge‐carrier transport, and photovoltaic characteristics of poly(3‐alkylthiophene) (P3AT):[6,6]‐phenyl‐C61‐butyric acid methyl ester (PCBM) blends are studied as a function of alkyl side‐chain length m, where m equals the number of alkyl carbon atoms. The P3ATs studied are poly(3‐butylthiophene) (P3BT, m = 4), poly(3‐pentylthiophene) (P3PT, m = 5), and poly(3‐hexylthiophene) (P3HT, m = 6). Solar cells with these blends deliver similar order of photo‐current yield (exceeding 10 mA cm^?2) irrespective of side‐chain length. Power conversion efficiencies of 3.2, 4.3, and 4.6% are within reach using solar cells with active layers of P3BT:PCBM (1:0.8), P3PT:PCBM (1:1), and P3HT:PCBM (1:1), respectively. A difference in fill factor values is found to be the main source of efficiency difference. Morphological studies reveal an increase in the degree of phase separation with increasing alkyl chain length. Moreover, while P3PT:PCBM and P3HT:PCBM films have similar hole mobility, measured by hole‐only diodes, the hole mobility in P3BT:PCBM lowers by nearly a factor of four. Bipolar measurements made by field‐effect transistor showed a decrease in the hole mobility and an increase in the electron mobility with increasing alkyl chain length. Balanced charge transport is only achieved in the P3HT:PCBM blend. This, together with better processing properties, explains the superior properties of P3HT as a solar cell material. P3PT is proved to be a potentially competitive material. The optoelectronic and charge transport properties observed in the different P3AT:PCBM bulk heterojunction (BHJ) blends provide useful information for understanding the physics of BHJ films and the working principles of the corresponding solar cells.     

Improved Performance of Polymer:Polymer Solar Cells by Doping Electron‐Accepting Polymers with an Organosulfonic Acid

The performance of polymer:polymer solar cells that are made using blend films of poly(3‐hexylthiophene) (P3HT) and poly(9,9‐dioctylfluorene‐co‐ benzothiadiazole (F8BT) is improved by doping the F8BT polymer with an organosulfonic acid [4‐ethylbezenesulfonic acid (EBSA)]. The EBSA doping of F8BT, to form F8BT‐EBSA, is performed by means of a two‐stage reaction at room temperature and 60°C with various EBSA weight ratios. The X‐ray photoelectron spectroscopy measurement reveals that both sulfur and nitrogen atoms in the F8BT polymer are affected by the EBSA doping. The F8BT‐EBSA films exhibit huge photoluminescence quenching, ionization potential shift toward lower energy, and greatly enhanced electron mobility. The short‐circuit current density of solar cells is improved by ca. twofold (10 wt.% EBSA doping), while the open‐circuit voltage increases by ca. 0.4 V. Consequently, the power conversion efficiency was improved by ca. threefold, even though the optical density of the P3HT:F8BT‐EBSA blend film is reduced by 10 wt.% EBSA doping due to the nanostructure and surface morphology change.     

Enhanced Vertical Charge Transport in a Semiconducting P3HT Thin Film on Single Layer Graphene

The crystallization and electrical characterization of the semiconducting polymer poly(3‐hexylthiophene) (P3HT) on a single layer graphene sheet is reported. Grazing incidence X‐ray diffraction revealed that P3HT crystallizes with a mixture of face‐on and edge‐on lamellar orientations on graphene compared to mainly edge‐on on a silicon substrate. Moreover, whereas ultrathin (10 nm) P3HT films form well oriented face‐on and edge‐on lamellae, thicker (50 nm) films form a mosaic of lamellae oriented at different angles from the graphene substrate. This mosaic of crystallites with π–π stacking oriented homogeneously at various angles inside the film favors the creation of a continuous pathway of interconnected crystallites, and results in a strong enhancement in vertical charge transport and charge carrier mobility in the thicker P3HT film. These results provide a better understanding of polythiophene crystallization on graphene, and should help the design of more efficient graphene based organic devices by control of the crystallinity of the semiconducting film.     

High‐Efficiency Organic Solar Cells Based on Preformed Poly(3‐hexylthiophene) Nanowires

Bulk heterojunction solar cells based on blends of poly(3‐hexylthiophene) (P3HT) and phenyl‐C61‐butyric acid methyl ester (PC₆₁BM) are fabricated using self‐assembled P3HT nanowires in a marginal solvent without post‐treatments. The interconnected network structures of self‐organized P3HT nanowires create continuous percolation pathways through the active layer and contribute to enhanced carrier mobility. The morphology and photovoltaic properties are studied as a function of ageing time of the P3HT precursor solution. Optimal photovoltaic properties are found at 60 h ageing time, which increases both light absorption and charge balance. Multilayered solar cells with a compositionally graded structure are fabriacted using preformed P3HT nanowires by inserting a pure P3HT donor phase onto the hole‐collecting electrode. Applying optimized annealing conditions to the P3HT buffer layer achieves an enhanced hole mobility and a power conversion efficiency of 3.94%. The introduction of a compositionally graded device structure, which contains a P3HT‐only region, reduces charge recombination and electron injection to the indium tin oxide (ITO) electrode and enhances the device properties. These results demonstrate that preformed semiconductor nanowires and compositionally graded structures constitute a promising approach to the control of bulk heterojunction morphology and charge‐carrier mobility.     

Self‐Assembled,Millimeter‐Sized TIPS‐Pentacene Spherulites Grown on Partially Crosslinked Polymer Gate Dielectric

Here, a highly crystalline and self‐assembled 6,13‐bis(triisopropylsilylethynyl) pentacene (TIPS‐Pentacene) thin films formed by simple spin‐coating for the fabrication of high‐performance solution‐processed organic field‐effect transistors (OFETs) are reported. Rather than using semiconducting organic small‐molecule–insulating polymer blends for an active layer of an organic transistor, TIPS‐Pentacene organic semiconductor is separately self‐assembled on partially crosslinked poly‐4‐vinylphenol:poly(melamine‐co‐formaldehyde) (PVP:PMF) gate dielectric, which results in a vertically segregated semiconductor‐dielectric film with millimeter‐sized spherulite‐crystalline morphology of TIPS‐Pentacene. The structural and electrical properties of TIPS‐Pentacene/PVP:PMF films have been studied using a combination of polarized optical microscopy, atomic force microscopy, 2D‐grazing incidence wide‐angle X‐ray scattering, and secondary ion mass spectrometry. It is finally demonstrated a high‐performance OFETs with a maximum hole mobility of 3.40 cm² V^?1 s^?1 which is, to the best of our knowledge, one of the highest mobility values for TIPS‐Pentacene OFETs fabricated using a conventional solution process. It is expected that this new deposition method would be applicable to other small molecular semiconductor–curable polymer gate dielectric systems for high‐performance organic electronic applications.     

Surface Directed Phase Separation of Semiconductor Ferroelectric Polymer Blends and their Use in Non‐Volatile Memories

The polymer phase separation of P(VDF‐TrFE):F8BT blends is studied in detail. Its morphology is key to the operation and performance of memory diodes. In this study, it is demonstrated that it is possible to direct the semiconducting domains of a phase‐separating mixture of P(VDF‐TrFE) and F8BT in a thin film into a highly ordered 2D lattice by means of surface directed phase separation. Numerical simulation of the surface‐controlled de‐mixing process provides insight in the ability of the substrate pattern to direct the phase separation, and hence the regularity of the domain pattern in the final dry blend layer. By optimizing the ratio of the blend components, the number of electrically active semiconductor domains is maximized. Pattern replication on a cm‐scale is achieved, and improved functional device performance is demonstrated in the form of a 10‐fold increase of the ON‐current and a sixfold increase in current modulation. This approach therefore provides a simple and scalable means to higher density integration, the ultimate target being a single semiconducting domain per memory cell.     

Controllable Shifts in Threshold Voltage of Top‐Gate Polymer Field‐Effect Transistors for Applications in Organic Nano Floating Gate Memory

Organic field‐effect transistor (FET) memory is an emerging technology with the potential to realize light‐weight, low‐cost, flexible charge storage media. Here, solution‐processed poly[9,9‐dioctylfluorenyl‐2,7‐diyl]‐co‐(bithiophene)] (F8T2) nano floating gate memory (NFGM) with a top‐gate/bottom‐contact device configuration is reported. A reversible shift in the threshold voltage (V_Th) and reliable memory characteristics was achieved by the incorporation of thin Au nanoparticles (NPs) as charge storage sites for negative charges (electrons) at the interface between polystyrene and cross‐linked poly(4‐vinylphenol). The F8T2 NFGM showed relatively high field‐effect mobility (µ_FET) (0.02 cm² V^?1 s^?1) for an amorphous semiconducting polymer with a large memory window (ca. 30 V), a high on/off ratio (more than 10⁴) during writing and erasing with an operation voltage of 80 V of gate bias in a relatively short timescale (less than 1 s), and a retention time of a few hours. This top‐gated polymer NFGM could be used as an organic transistor memory element for organic flash memory.     

Fullerene Additives Convert Ambipolar Transport to p‐Type Transport while Improving the Operational Stability of Organic Thin Film Transistors

Many high charge carrier mobility (μ) active layers within organic field‐effect transistor (OFET) configurations exhibit non‐linear current–voltage characteristics that may drift with time under applied bias and, when applying conventional equations for ideal FETs, may give inconsistent μ values. This study demonstrates that the introduction of electron deficient fullerene acceptors into thin films comprised of the high‐mobility semiconducting polymer PCDTPT suppresses an undesirable “double‐slope” in the current–voltage characteristics, improves operational stability, and changes ambipolar transport to unipolar transport. Examination of other high μ polymers shows general applicability. This study also shows that one can further reduce instability by tuning the relative electron affinity of the polymer and fullerene by creating blends containing different fullerene derivatives and semiconductor polymers. One can obtain hole μ values up to 5.6 cm² V^–1 s^–1 that are remarkably stable over multiple bias‐sweeping cycles. The results provide a simple, solution‐processable route to dictate transport properties and improve semiconductor durability in systems that display similar non‐idealities.     

Efficient Polythiophene/Polyfluorene Copolymer Bulk Heterojunction Photovoltaic Devices: Device Physics and Annealing Effects

Here the influence of annealing on the operational efficiency of all‐polymer solar cells based on blends of the polymers poly(3‐hexylthiophene) (P3HT) and poly((9,9‐dioctylfluorene)‐2,7‐diyl‐alt‐[4,7‐bis(3‐hexylthiophen‐5‐yl)‐2,1,3‐benzothiadiazole]‐2′,2″‐diyl) (F8TBT) is investigated. Annealing of completed devices is found to result in an increase in power conversion efficiency from 0.14 to 1.20%, while annealing of films prior to top electrode deposition increases device efficiency to only 0.19% due to a lowering of the open‐circuit voltage and short‐circuit current. By studying the dependence of photocurrent on intensity and effective applied bias, annealing is found to increase charge generation efficiency through an increase in the efficiency of the separation of bound electron‐hole pairs following charge transfer. However, unlike many other all‐polymer blends, this increase in charge separation efficiency is not only due to an increase in the degree of phase separation that assists in the spatial separation of electron‐hole pairs, but also due to an order of magnitude increase in the hole mobility of the P3HT phase. The increase in hole mobility with annealing is attributed to the ordering of P3HT chains evidenced by the red‐shifting of P3HT optical absorption in the blend. We also use X‐ray photoelectron spectroscopy (XPS) to study the influence of annealing protocol on film interface composition. Surprisingly both top and bottom electrode/blend interfaces are enriched with P3HT, with the blend/top electrode interface consisting of more than 95% P3HT for as‐spun films and films annealed without a top electrode. Films annealed following top electrode deposition, however, show an increase in F8TBT composition to ～15%. The implications of interfacial composition and the origin of open‐circuit voltage in these devices are also discussed.     

In‐Plane Alignment in Organic Solar Cells to Probe the Morphological Dependence of Charge Recombination

Bulk heterojunction (BHJ) organic solar cells are fabricated with the polymer semiconductor aligned in the plane of the film to probe charge recombination losses associated with aggregates characterized by varying degrees of local order. 100% uniaxial strain is applied on ductile poly(3‐hexylthiophene):phenyl‐C61‐butyric acid methyl ester (P3HT:PCBM) BHJ films and characterize the resulting morphology with ultraviolet‐visible absorption spectroscopy and grazing incidence X‐ray diffraction. It is found that the strained films result in strong alignment of the highly ordered polymer aggregates. Polymer aggregates with lower order and amorphous regions also align but with a much broader orientation distribution. The solar cells are then tested under linearly polarized light where the light is selectively absorbed by the appropriately oriented polymer, while maintaining a common local environment for the sweep out of photogenerated charge carriers. Results show that charge collection losses associated with a disordered BHJ film are circumvented, and the internal quantum efficiency is independent of P3HT local aggregate order near the heterojunction interface. Uniquely, this experimental approach allows for selective excitation of distinct morphological features of a conjugated polymer within a single BHJ film, providing insight into the morphological origin of recombination losses.     

High‐Performance n‐Channel Thin‐Film Field‐Effect Transistors Based on a Nanowire‐Forming Polymer

A new electrontransport polymer, poly{[N,N′‐dioctylperylene‐3,4,9,10‐bis(dicarboximide)‐1,7(6)‐diyl]‐alt‐[(2,5‐bis(2‐ethyl‐hexyl)‐1,4‐phenylene)bis(ethyn‐2,1‐diyl]} (PDIC8‐EB), is synthesized. In chloroform, the polymer undergoes self‐assembly, forming a nanowire suspension. The nanowire's optical and electrochemical properties, morphological structure, and field‐effect transistor (FET) characteristics are investigated. Thin films fabricated from a PDIC8‐EB nanowire suspension are composed of ordered nanowires and ordered and amorphous non‐nanowire phases, whereas films prepared from a homogeneous PDIC8‐EB solution consist of only the ordered and amorphous non‐nanowire phases. X‐ray scattering experiments suggest that in both nanowires and ordered phases, the PDIC8 units are laterally stacked in an edge‐on manner with respect to the film plane, with full interdigitation of the octyl chains, and with the polymer backbones preferentially oriented within the film plane. The ordering and orientations are significantly enhanced through thermal annealing at 200 °C under inert conditions. The polymer film with high degree of structural ordering and strong orientation yields a high electron mobility (0.10 ± 0.05 cm² V^?1 s^?1), with a high on/off ratio (3.7 × 10⁶), a low threshold voltage (8 V), and negligible hysteresis (0.5 V). This study demonstrates that the polymer in the nanowire suspension provides a suitable material for fabricating the active layers of high‐performance n‐channel FET devices via a solution coating process.