Active fault‐tolerant control for switched systems with time delay

This paper focuses on the problem of active fault‐tolerant control for switched systems with time delay. By utilizing the fault diagnosis observer, an adaptive fault estimate algorithm is proposed, which can estimate the fault signal fast and exactly. Meanwhile, a delay‐dependent criterion is obtained with the purpose of reducing the conservatism of the adaptive observer design. Based on the fault estimation information, an observer‐based fault‐tolerant controller is designed to guarantee the stability of the closed‐loop system. In terms of linear matrix inequality, sufficient conditions are derived for the existence of the adaptive observer and fault‐tolerant controller. Finally, a numerical example is included to illustrate the efficiency of the proposed approach. Copyright © 2011 John Wiley & Sons, Ltd.     

Sensor fault diagnosis and fault‐tolerant control for stochastic distribution time‐delayed control systems

In this paper, a new fault diagnosis and fault‐tolerant control method based on the model equivalent transformation is proposed for the stochastic distribution time‐delayed control system, in which the random delay between the controller and the actuator and the external disturbance is considered. The system is modeled by using a linear B‐spline to approximate the probability density function (PDF) of system output. The original system is transformed into an equivalent system without random delay based on the Laplace transformation method. Then, the equivalent system that is converted to the augmentation system with a new state variable is introduced. The observer is designed to estimate the fault information based on the augmentation system. Observer gain matrices and controller parameters are obtained by solving the linear matrix inequality. The PI control algorithm is used to make the PDF of the system output track the desired distribution. Finally, the validity of the proposed method is verified by computer simulation results.     

基于Markov model的容错计算机联锁系统可靠性分析

容错设计是提高计算机系统可靠性的有效手段。本文研究了容错控制系统可靠性概念的内涵和定义,并结合工程实践讨论了我国的一种典型容错计算机联锁系统,且建立了考虑故障恢复和故障处理能力的多阶马尔可夫模型,进行了定量分析。     

Adaptive fault tolerant control against actuator faults

This paper investigates the problem of adaptive fault tolerant control for a class of dynamic systems with unknown un‐modeled actuator faults. The fault model is assumed to be an unknown nonlinear function of control input, not in the traditional form in which the faults can be described as gain and/or bias faults. Using the property of the basic function of neural networks and the implicit function theorem, a novel neural networks‐based fault tolerant controller is designed. Finally, the lateral dynamics of a front‐wheeled steered vehicle is used to demonstrate the efficiency of the proposed design techniques. Copyright © 2016 John Wiley & Sons, Ltd.     

Analysis and detection of incipient faults in post‐fault systems subject to adaptive fault‐tolerant control

This paper presents an effective scheme for detecting incipient faults in post‐fault systems (PFSs) subject to adaptive fault‐tolerant control (AFTC). Through a survey of existing techniques, it is shown that the adaptivity of the AFTC counteracts the effect of an incipient fault in the PFS. This makes some of the conventional fault‐detection strategies, such as Beard–Jones detection filters and adaptive observers, ineffective in this situation. It is shown that the unknown input observer (UIO) is an effective tool; hence, the UIO is designed to decouple the incipient fault from the AFTC such that the fault‐detection residual is sensitive only to the incipient fault. Extensive simulation study is presented using an aircraft example to test three fault‐detection approaches; it is demonstrated that the UIO is the most effective tool in detecting the incipient fault in a PFS subject to AFTC. Copyright © 2007 John Wiley & Sons, Ltd.     

Model‐free fault‐tolerant control approach for uncertain state‐constrained linear systems with actuator faults

This paper investigates the robust adaptive fault‐tolerant control problem for state‐constrained continuous‐time linear systems with parameter uncertainties, external disturbances, and actuator faults including stuck, outage, and loss of effectiveness. It is assumed that the knowledge of the system matrices, as well as the upper bounds of the disturbances and faults, is unknown. By incorporating a barrier‐function like term into the Lyapunov function design, a novel model‐free fault‐tolerant control scheme is proposed in a parameter‐dependent form, and the state constraint requirements are guaranteed. The time‐varying parameters are adjusted online based on an adaptive method to prevent the states from violating the constraints and compensate automatically the uncertainties, disturbances, and actuator faults. The time‐invariant parameters solved by using data‐based policy iteration algorithm are introduced for helping to stabilize the system. Furthermore, it is shown that the states converge asymptotically to zero without transgression of the constraints and all signals in the resulting closed‐loop system are uniformly bounded. Finally, two simulation examples are provided to show the effectiveness of the proposed approach. Copyright © 2016 John Wiley & Sons, Ltd.     

Active fault‐tolerant control for near space vehicles based on reference model adaptive sliding mode scheme

In this paper, an adaptive sliding mode (ASM) scheme is proposed for fault identification and fault‐tolerant control of near space vehicles (NSVs). First, the attitude dynamic model is introduced, and a baseline controller based on reference sliding mode scheme is designed in the case of no faults. Then fault parameterizations with actuator dynamics is presented for several classes of faults: lock‐in‐place, float, hard‐over, and loss of effectiveness. On the basis of adaptive observer design, fault parameters can be accurately estimated on‐line. Furthermore, an ASM fault‐tolerant controller is designed for both cases of actuator dynamic faults and control effector damage. Finally, simulation experiments show that the proposed ASM scheme is able to quickly and accurately identify faults and reconfigure the controller, resulting in excellent overall system performance. Copyright © 2012 John Wiley & Sons, Ltd.     

Active fault tolerant control of piecewise affine systems with reference tracking and input constraints

An active fault tolerant control (AFTC) method is proposed for discrete‐time piecewise affine (PWA) systems. Only actuator faults are considered. The AFTC framework contains a supervisory scheme, which selects a suitable controller in a set of controllers such that the stability and an acceptable performance of the faulty system are held. The design of the supervisory scheme is not considered here. The set of controllers is composed of a normal controller for the fault‐free case, an active fault detection and isolation controller for isolation and identification of the faults, and a set of passive fault tolerant controllers (PFTCs) modules designed to be robust against a set of actuator faults. In this research, the piecewise nonlinear model is approximated by a PWA system. The PFTCs are state feedback laws. Each one is robust against a fixed set of actuator faults and is able to track the reference signal while the control inputs are bounded. The PFTC problem is transformed into a feasibility problem of a set of LMIs. The method is applied on a large‐scale live‐stock ventilation model. Copyright © 2013 John Wiley & Sons, Ltd.     

Supervisory fault‐tolerant control with mutual performance optimization

The problem of active fault‐tolerant control with reconfiguration mechanism for uncertain linear systems with external disturbances is addressed applying the supervisory control approach. A key feature of the proposed approach is establishment of a set of conditions providing mutual performance in the sense of taking into account the interaction of the fault detection, isolation, and accommodation subsystems in order to achieve global fault‐tolerance performance with guaranteed global stability. The efficiency of the approach is demonstrated in an example of computer simulation for a flight system benchmark. Copyright © 2012 John Wiley & Sons, Ltd.     

Adaptive finite‐time actuator fault‐tolerant coordinated attitude control of multispacecraft with input saturation

In this study, for nonrigid spacecraft formation, a distributed adaptive finite‐time actuator fault‐tolerant (FTAFT) coordinated attitude tracking control (CATC) issue is addressed. Aiming at stabilizing the spacecraft formation flying system during a limited time, two distributed adaptive FTAFT CATC strategies are presented. Initially, on basis of distributed finite‐time observer (DFTO), adaptive control, consensus approach, graph theory, and finite‐time theory, we develop a distributed adaptive FTAFT coordinated attitude tracking controller to repress the impact of the external state‐dependent and state‐independent disturbance, unknown time‐varying inertia uncertainty, and actuator fading or fault. Then, combining with the proposed controller, a distributed adaptive FTAFT control law with input saturation subjected to physical limitations of actuator is further designed. In addition, a self‐adjusting matrix (SAM) is proposed to improve the actuators' performance. With the two proposed CATC strategies, the followers can synchronize with the leader. Simulations demonstrated the validity of the designed control laws.     

A model reference tracking based on an active fault tolerant control for LPV systems

This work deals with the problem of a model reference tracking based on the design of an active fault tolerant control for linear parameter‐varying systems affected by actuator faults and unknown inputs. Linear parameter‐varying systems are described by a polytopic representation with measurable gain scheduling functions. The main contribution is to design an active fault tolerant controller whose control law is described by an adaptive proportional integral structure. This one requires 3 types of online information, which are reference outputs, measured real outputs, and the fault estimation provided by a model reference, sensors, and an adaptive polytopic observer, respectively. These types of information are used to reconfigure the designed controller, which is able to compensate the fault effects and to make the closed‐loop system able to track reference outputs in spite of the presence of actuator faults and disturbances. The controller and the observer gains are obtained by solving a set of linear matrices inequalities. Performances of the proposed method are compared to another previous method to underline the relevant results.     

Actuator fault‐tolerant control based on set separation

In this paper, an actuator fault‐tolerant control (FTC) strategy based on set separation is presented. The proposed scheme employs a standard configuration consisting of a bank of observers which match the different fault situations that can occur in the plant. Each of these observers has an associated estimation error with a distinctive behaviour when a estimator matches the current fault situation of the plant. With this information from each observer, a fault diagnosis and isolation (FDI) module is able to reconfigure the control loop by selecting the appropriate stabilising controller from a bank of precomputed control laws, each of them related to one of the considered fault models. The control law consists of a reference feedforward term and a feedback gain multiplying the state estimate provided by the matching observer. A novel feature of the proposed scheme resides in the decision criteria of the FDI, which is based on the computation of sets towards which the output estimation errors related to each fault scenario and for each control configuration converge. Conditions for the design of the FDI module and for fault tolerant closed‐loop stability are given, and the effectiveness of the approach is illustrated by means of a numerical example. Copyright © 2010 John Wiley & Sons, Ltd.     

A semi‐adaptive control approach to closed‐loop medication infusion

This paper presents a semi‐adaptive control approach to closed‐loop medication infusion problems. The rationale underlying this approach is to design a controller that can adapt model parameters with a large impact on the model's fidelity while fixing the remaining parameters at nominal values. In this paper, a control‐oriented model for this purpose is derived via system identification and sensitivity analysis of a low‐order model capturing the direct dose‐response relationship Using the model thus derived, a model‐reference adaptive controller and a composite adaptive controller are designed and compared with each other. In‐silico simulation results using remifentanil's effect on respiratory rate as an example indicate that both controllers can regulate the output at commanded set points. Copyright © 2016 John Wiley & Sons, Ltd.     

Fault‐tolerant control for wireless networked control systems with an integrated scheduler

This paper addresses a study of fault‐tolerant control (FTC) for wireless networked control systems (WNCSs) in industrial automatic processes. The WNCSs is composed of many subsystems, which operate with different sampling cycles. In order to meet the real‐time requirements and ensure a deterministic data transmission, the time division multiple access (TDMA) mechanism is adopted in WNCSs. The data in WNCSs are transmitted following a TDMA‐based scheduler. According to the periodicity, WNCSs integrated with the scheduler is first formulated as discrete linear time periodic systems (LTPSs). Afterwards, a fault estimation method for LTPSs is developed under a H_∞ performance specification with a regional pole constraint. With the achieved state observer and fault estimator, an FTC strategy for LTPSs is explored. Finally, the proposed methods are verified on a physical experimental WiNC platform. Copyright © 2016 John Wiley & Sons, Ltd.     

Fault‐tolerant saturated control for switching discrete‐time systems with delays

In this paper, fault‐tolerant control problem for discrete‐time switching systems with delay and saturated input is studied. Sufficient conditions of building an observer are obtained by using multiple Lyapunov function. These conditions are worked out using cone complementarity technique, to obtain LMIs with slack variables and multiple weighted residual matrices. The obtained results are applied on a numerical example showing fault detection, localization of fault, and reconfiguration of the control to maintain asymptotic stability even in the presence of a permanent sensor fault and saturation on the control. Copyright © 2014 John Wiley & Sons, Ltd.     

Direct design from input/output data of a fault‐tolerant control system based on GIMC structure

This paper deals with a method for the design of a fault‐tolerant control system based on the Generalized Internal Model Control (GIMC) structure, consisting of a standard outer loop feedback controller and an extra inner loop controller. The distinguishing feature of the GIMC structure is that controller design for performance and robustness may be performed separately. The outer loop controller is designed for nominal performance using some controller synthesis to meet the (nominal) control specification, while the inner loop controller is designed to make a trade‐off between robustness and performance. This feature is suitable for fault‐tolerant control. The outer loop controller is designed for the fault‐free case, and the inner loop controller for the fault‐time case. In the conventional methods, the inner loop controller is designed to maximize the robust stability margin without fault information. Therefore, the performance in the fault‐time case tends to become conservative. In this paper, the inner loop controller is directly designed from experimental data collected from the faulty system. Since the collected data contains information on the fault, conservativeness in the conventional methods is decreased. The inner loop controller is designed by Virtual Reference Feedback Timing (VRFT). VRFT is a method of direct design from input‐output data without identifying any models. Since the complexity of the controller can be specified by the designer, no complexity reduction is necessarily required, which is advantageous in implementation. The effectiveness of the proposed design method is confirmed by an experiment. © 2010 Wiley Periodicals, Inc. Electr Eng Jpn, 171(4): 53–62, 2010; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20929     

Active fault‐tolerant attitude control for flexible spacecraft with loss of actuator effectiveness

A theoretical framework for active fault‐tolerant attitude stabilization control is developed and applied to flexible spacecraft. The proposed scheme solves a difficult problem of fault‐tolerant controller design in the presence of severe partial loss of actuator effectiveness faults and external disturbances. This is accomplished by developing an observer‐based fault detection and diagnosis mechanism to reconstruct the actuator faults. Accordingly, a backstepping‐based fault‐tolerant control law is reconfigured using the reconstructed fault information. It is shown that the proposed design approach guarantees that all of the signals of the closed‐loop system are uniformly ultimately bounded. The closed‐loop performance of the proposed control strategy is evaluated extensively through numerical simulations. Copyright © 2012 John Wiley & Sons, Ltd.     

Transient management of a supervisory fault‐tolerant control scheme based on dwell‐time conditions

The paper deals with the design of an active fault‐tolerant control strategy based on the supervisory control approach technique for linear time invariant MIMO systems affected by disturbances, measurement noise, and faults. From a bank of Luenberger observers that plays the role of a fault detection and isolation scheme, the supervisory algorithm aims at selecting the suitable fault‐tolerant controller by means of a hysteresis‐based switching mechanism. Based on dwell‐time conditions, Lyapunov global exponential stability is addressed, and it is shown how transient behaviors due to the inherent interactions between fault detection and isolation, fault‐tolerant control, and the reconfiguration mechanism can be improved. The main advantage with respect to existing solutions of open literature is relative to a simple parameterization of all controllers (possibly having different state dimensions, integral action, and/or unstable poles) in order to cope with bumps and undesirable transients when (possible multiple) switches occur. Moreover, it is shown that it is possible to improve (reduce) the dwell‐time value in some cases. The efficiency of the approach is demonstrated on the academic highly maneuverable technology benchmark. Copyright © 2014 John Wiley & Sons, Ltd.     

Comparisons of adaptive fault‐tolerant insensitive control methods for a class of linear systems

In this paper, the problem of fault‐tolerant insensitive control is addressed for a class of linear time‐invariant continuous‐time systems against bounded time‐varying actuator faults and controller gain variations. Adaptive mechanisms are developed to adjust controller gains in order to compensate for the detrimental effects of partial loss of control effectiveness and bias‐actuator faults. Variations of controller gains arise from time‐varying and bounded perturbations that are supposed to always exist in adaptive mechanisms. Based on the disturbed outputs of adaptive mechanisms, three different adaptive control strategies are constructed to achieve bounded stability results of the closed‐loop adaptive fault‐tolerant control systems in the presence of actuator faults and controller gain variations. Furthermore, comparisons of convergence boundaries of states and limits of control inputs among adaptive strategies are developed in this paper. The efficiency of the proposed adaptive control strategies and their comparisons are demonstrated by a rocket fairing structural‐acoustic model.     

Fault‐tolerant control of linear multivariable controllers using iterative feedback tuning

This paper introduces the iterative feedback tuning (IFT) into a Youla parameterization scheme for fault‐tolerant control. By off‐line IFT‐experiments of tuning Youla parameters, the proposed algorithm deals with a number of conditional failures that are described by the dual Youla parameter. The main contribution of this paper is to show how Youla scheme‐based IFT can be constructed for multivariable linear time‐invariant systems. Particular attention is given to the issue of the structure of the Youla parameter (filter), in which both finite impulse response and infinite impulse response filters are presented and compared. As an illustration, the method is applied to a simulation model of a continuous stirred tank heater system. Copyright © 2014 John Wiley & Sons, Ltd.