共查询到20条相似文献,搜索用时 156 毫秒
1.
2.
3.
介绍了一种新型颈椎治疗仪的结构及控制系统的设计方法。该颈椎治疗仪采用气动技术与微机控制技术相结合,可以调节牵引力的大小,设定治疗时间。克服了传统的颈椎治疗仪的缺点,具有结构合理、使用舒适,易于调节,操作简单,便于家庭使用等特点。 相似文献
4.
基于FPGA的半导体激光器驱动电源的设计 总被引:2,自引:0,他引:2
介绍了一种基于FPGA技术的半导体激光器驱动电源的设计,电源内部采用软硬件相结合的手段,采用FPGA技术来实现数字化控制,并且优化电路设计,增加了整个系统的可靠性,从而使驱动电源具有智能化程度高、抗干扰能力强、温度控制精度高、电源稳定度高、对激光器无损害等优点. 相似文献
5.
6.
本文叙述了采用驻波电场优化技术制成的“高功率二氧化碳激光器输出窗口”的基本原理、膜系设计及其工艺技术。 相似文献
7.
一体化半导体激光器的ANSYS热仿真及结构设计 总被引:3,自引:0,他引:3
传统半导体激光器与驱动控制器多采用分离式设计,故半导体激光器系统的体积很难紧凑化,而一体化半导体激光器存在电路集成度高,发热严重等问题,因此,本文提出了对半导体激光器进行一体化、小型化设计的方法。为了保证所设计的半导体激光器运行时系统温度分布均匀,输出激光不受温度变化影响,在结构设计之前,利用ANSYS软件对元器件集成度较高的电路板等热源进行了热仿真,提高了集成后结构的可靠性。仿真结果显示,优化设计后的半导体激光器一体化结构满足激光器温度要求,系统温度分布均匀,能保证激光器稳定运行。设计的新型半导体激光器的整体结构尺寸仅为85mm×95mm×115mm,不仅实现了半导体激光器与驱动控制器的一体化与小型化集成,并且结构中留有准直光路设计空间,便于后期的应用研究。 相似文献
8.
研制了一款超低噪声单频可调谐高抗振激光器,介绍了它的工作原理和设计方案.该激光器工作波长为1 550 nm,主要由单频激光谐振腔、保偏光纤放大器以及监控反馈光路组成.采用了精密稳定的闭环温控技术,使得激光器的工作温度极其稳定,温度控制分辨率达0.001℃.使用了鉴频部件及配套闭环系统锁定激光器的输出频率和功率,由此不仅保证了波长和功率的稳定性能,而且大大降低了激光器的低频噪声,同时制备的激光器光学膜也有效地提高了激光损伤阈值.与同类激光器的性能相比,设计的光纤激光器可保证功率稳定性优于1%,相对强度噪声优于-130 dBc/Hz;选择不同类型的种子光源谐振腔,激光器的线宽可控制在1~400 kHz.另外,激光器的最大波长调谐范围为3 nm,输出功率可达1W.在频率为1 Hz时,其相位噪声低于10 μrad·Hz-1/2/m OPD;抗振动能力可达到0.1g(g为重力加速度). 相似文献
9.
王智勇 《仪器仪表与分析监测》2015,(1):1-6
100G客户侧光模块采用LAN-WDM或CWDM等四路波分复用技术,单通道速率为25Gbps。工作在25G及以上速率的TOSA,包括半导体激光器芯片及其对应的封装技术,较低速光组件均有了较大改变。主要介绍25G以上高速激光器芯片,包括直接调制激光器DML、EML及其对应的封装技术的进展。 相似文献
10.
近年来,谐振及调制因其稳定度高、可操作性强等原因在激光器锁频技术中的应用越来越广泛。文章从谐振技术及调制技术两方面的共选取6种典型的激光器锁频实验系统进行综合分析,认为:通过控制谐振腔腔长的激光器锁频实验系统相对简单,选择好的腔体材料、设计好伺服控制电路就能实现快速锁定,其中双重锁定稳定度较高;通过加载调制的激光器锁频实验系统比较复杂,用到的实验仪器较多,内调制会对激光产生扰动,其中调制转移谱的锁频方法稳定度较高。为激光器锁频技术的优化提供参考。 相似文献
11.
12.
设计并搭建了重复频率长时精确锁定的783 nm飞秒光纤激光器。该激光器基于全保偏非线性干涉环镜(NALM),实现掺铒光纤振荡器锁模脉冲输出,由与脉冲分离器级联的环境稳定掺铒光纤双级放大器进行功率放大,实现了平均功率1.30 W、脉冲宽度130 fs、重复频率77.1 MHz、1 560 nm脉冲输出;通过周期极化铌酸锂(PPLN)光学晶体倍频,获得了平均功率为0.52 W、脉冲宽度为140 fs、783 nm脉冲输出。通过重复频率监测及锁相环技术,进一步将掺铒光纤振荡器的重复频率溯源至参考铷原子钟,12 h内频率抖动峰-峰值为5 mHz、标准偏差为1.2 mHz。该激光器系统具有稳定性高、集成度高、体积小的特点。 相似文献
13.
An apparatus for observation of laser-assisted electron scattering (LAES) in femtosecond intense laser fields was developed. The unique apparatus has three essential components, i.e., a photocathode-type ultrashort pulsed-electron gun, a toroidal-type electron energy analyzer enabling simultaneous detection of energy and angular distributions of scattered electrons with high efficiency, and a high repetition-rate data acquisition system combined with a high power 5 kHz Ti:sapphire laser system. These advantages make extremely weak femtosecond-LAES signals distinguishable from the huge elastic scattering signals. A precise method for securing a spatial overlap between three beams, that is, an atomic beam, an electron beam, and a laser beam, and synchronization between the electron and laser pulses is described. As a demonstration of this apparatus, an electron energy spectrum of the LAES signals with 1.4 × 10(12) W/cm(2), 795 nm, 50 fs laser pulses was observed, and the detection limit and further improvements of the apparatus are examined. 相似文献
14.
An alternating magnetic field (AMF) apparatus is developed and composed of an electromagnet and driving power supply. The structure of the electromagnet and configuration of the driving supply are described in detail. The apparatus can produce a peak magnetic field up to 9000 Oe and above under a small driving power at its resonance frequency of 1.14 kHz. Based on synchronization between the AMF and the femtosecond laser pulse train, a photomagnetic synchronized time- and high-field-resolved all-optical pump-probe magnetic-optical setup is developed. This setup has the ability to reinitialize any magnetic states between two successive laser pulses so that irreversible magnetization reversal dynamics can be studied. Dynamic Kerr hysteresis loops and magnetization reversal dynamics of high coercivity ferromagnetic TbFeCo and FePt films are demonstrated using this setup, showing importance of this synchronized time- and high-field-resolved all-optical pump-probe magnetic-optical setup in the research of ultrafast magnetization dynamics. 相似文献
15.
设计、制作了一款980nm高稳定度激光泵浦源控制系统,以满足掺铒光纤放大器(EDFA)稳定工作的需要。首先,以恒流激励原理设计了控制系统的驱动单元。接着,使用半导体制冷器(TEC)作为泵浦源的温度控制手段,设计了控制系统的温度控制单元。为了验证控制系统的有效性,选用一款激光泵浦模块组成了完整的激光泵浦源系统。最后,对激光泵浦源的激光输出进行了实验,研究了光功率与驱动电流的关系,以及系统的光功率稳定度与光谱稳定性等。对系统进行了相关测试实验,结果显示:应用了本控制系统的激光泵浦源的激光输出中心波长为975.2nm,光功率可达600mW,短期光功率稳定度为±0.008dB,长期光功率稳定度为±0.05dB,比同类激光泵浦源具有更高的稳定度。得到的结果表明:所设计的激光泵浦源控制系统满足设计要求,具有一定的实用价值。 相似文献
16.
C.D. DesForges 《Tribology International》1978,11(2):139-143
This paper reviews recent developments in the application of high power lasers to materials processing technology. The use of fine beams of laser energy to modify the surface properties of metallic materials is described in detail with specific emphasis on transformation hardening, surface alloying, and laser glazing. The successful exploitation of this new technology points to a significant potential for manufacturing industry to develop wear resistant surfaces using these laser systems 相似文献
17.
18.
19.
Cheiney P Carraz O Bartoszek-Bober D Faure S Vermersch F Fabre CM Gattobigio GL Lahaye T Guéry-Odelin D Mathevet R 《The Review of scientific instruments》2011,82(6):063115
We describe a simple Zeeman slower design using permanent magnets. Contrary to common wire-wound setups, no electric power and water cooling are required. In addition, the whole system can be assembled and disassembled at will. The magnetic field is however transverse to the atomic motion and an extra repumper laser is necessary. A Halbach configuration of the magnets produces a high quality magnetic field and no further adjustment is needed. After optimization of the laser parameters, the apparatus produces an intense beam of slow and cold (87)Rb atoms. With typical fluxes of (1-5) × 10(10)?atoms/s at 30 m s(-1), our apparatus efficiently loads a large magneto-optical trap with more than 10(10) atoms in 1 s, which is an ideal starting point for degenerate quantum gas experiments. 相似文献
20.
应用激光法测定溶液糖份浓度的实验研究 总被引:1,自引:0,他引:1
本文介绍激光在糖份测定中的一种应用,并在自制的模拟实验装置上对几种不同浓度的糖液进行了糖份测定。初步的实验结果表明:应用激光法测定糖份具有快速,简便和精度高的特点。 相似文献