共查询到18条相似文献,搜索用时 125 毫秒
1.
2.
提出了一种新型双陷波特性的超宽带单极子天线。通过在介质基板上添加锥形辐射贴片,天线可以覆盖超宽带通信频段。在辐射贴片上引入上、下两个锥形缝隙结构,可以实现3.5 GHz、5.5 GHz的双陷波特性。天线实测模型电压驻波比<2的阻抗带宽是2.56~10.61 GHz,其中3.18~3.76 GHz和4.4~5.75 GHz具有陷波特性。测试表明,天线在工作频带内具有全向辐射特性。 相似文献
3.
《电子元件与材料》2015,(10):72-75
提出了一款新型平面三频段微带缝隙天线。首先设计了一个由阶梯阻抗辐射贴片构成的宽带天线,然后通过在贴片上开C型和U型缝隙,引入了两个陷波,实现了三频段天线。所设计三频段微带天线的三个频段的中心频率分别为2.54,3.56以及5.06 GHz。其中,第一频段电压驻波比(VSWR)≤2的阻抗带宽范围为2.32~2.76 GHz,第二频段VSWR≤2的阻抗带宽范围为3.34~3.78 GHz,第三频段VSWR≤2的阻抗带宽范围为3.96~6.16 GHz,天线的尺寸为52 mm×56 mm×0.813 mm。该天线的频带范围包含了无线局域网(WLAN)和全球微波互联接入(Wi MAX)的所有频段。 相似文献
4.
超宽带(UWB)系统的工作频段与现有的许多窄带系统频段相互重叠,因此各个系统信号之间存在潜在的干扰。针对上述问题提出了一种紧凑型超宽带双陷波天线。天线由一个圆形辐射贴片构成并通过50W的微带线进行馈电。接地板和传统的接地板相比被截短了,以提高天线的阻抗带宽。通过在辐射贴片上刻蚀H 型槽来实现天线的双陷波功能,并在微带馈线中引入了嵌入式谐振回路(ERC)结构,加大了天线的陷波深度和阻带宽度,陷波性能好于同频段的双陷波天线。仿真和测试结果表明,天线在3.1~4.2 GHz 以及5.0~6.6GHz 具有陷波特性,有效地避免了WiMAX 和WLAN 频段信号的干扰。同时在2.8 ~10.7 GHz 的其它频段上具有良好的阻抗匹配和较好辐射方向特性。天线的尺寸为34mm*26mm*1.6 mm,结构较为紧凑。 相似文献
5.
提出了一款紧凑型多陷波特性超宽带天线,该天线由圆形贴片和改进的接地板组成。采用在辐射贴片上开两个圆弧状U形槽和接地板上开一个U形窄缝隙的结构使其具有多陷波特性。天线的体积仅为32 mm′25 mm′1.6 mm,结构紧凑。仿真与测试结果表明:该天线工作带宽为2.8 ~ 16 GHz,实现了3.2~3.8 GHz、4.5~5.5 GHz 和7.2~8.6 GHz 3个频段的陷波特性,有效阻隔了WiMAX(3.3~ 3.6 GHz)、大容量微波通信频段(4.5~5 GHz)、部分WLAN(5.1~5.35 GHz)、X波段(7.25~7.75 GHz)和国际电信联盟(ITU)波段(8.01~8.5 GHz)窄带信号的干扰。除陷波频段外该天线具有良好性能和辐射方向性,更适合应用于超宽带系统。 相似文献
6.
文中提出了一种新型小尺寸具有三陷波特性的UWB天线。所设计的天线基本几何结构由50 Ω馈电线、圆形辐射贴片、缺陷地和一对开口谐振环组成,通过在天线的圆形辐射贴片上内嵌一对Y型贴片、地板上蚀刻出U型贴片和一对开口谐振环实现三陷波特性,天线的尺寸为30 mm×30 mm×16 mm。仿真和测试结果表明,该天线29~107 GHz的频段内回波损耗<-10 dB,在37~42 GHz、515~5825 GHz和79~84 GHz3个频段内具有陷波特性,分别有效抑制了C频段的卫星系统、WLAN系统和X频段卫星系统对超宽带系统的干扰。在除3个阻带频段外的其余UWB工作频段范围内,有着良好的辐射方向特性和稳定的增益。仿真结果和实验结果表现出了良好的一致性。 相似文献
7.
提出了一种紧凑型共面波导馈电的具有三阻带特性的超宽带天线。所设计天线的基本几何结构由共面波导(CPW)馈电线、菱形辐射贴片和矩形宽缝隙组成。通过在辐射贴片上刻蚀一个U型槽,以及在共面波导的接地面上增加两对L型的寄生旁枝结构来实现天线的三陷波特性。天线尺寸为32mm×32mm×0.508mm。仿真和实验结果表明,该天线在2.6~11.5GHz的频段内电压驻波比小于2,在3.15~3.80GHz、5.20~5.80GHz和8.2~8.7GHz三个频段内具有陷波特性,分别有效阻隔了Wi MAX系统、WLAN系统和ITU 8GHz频段信号对于超宽带(UWB)系统的干扰。在除三个阻带频段外的其余UWB工作频段范围内,具有良好的辐射方向特性和稳定的增益。仿真结果和实验结果表现出良好的一致性。 相似文献
8.
设计了一款新型的具有陷波特性的超宽带单极子天线。该天线的带宽为3. 1 ~ 12. 0 GHz,通过在矩
形辐射贴片上制作出对称的梯形结构、中心加载倒C 形缝隙、矩形开槽,并将窄矩形接地板切除两个边角,制作矩形
开槽结构,使得天线在3. 3 ~5. 35 GHz 频段产生陷波特性。该天线结构紧凑,尺寸仅为20 mm×25 mm×1. 0 mm。建
立天线模型,并对其进行仿真和优化。研究表明,天线在WiMAX 频段、C 波段、数字微波通信、大容量微波通信和部
分WLAN 等多个频段产生良好的陷波特性,且在工作频段内有良好的性能和辐射方向特性。 相似文献
9.
10.
本文给出了一款小型化多频段平面印刷单极子天线的设计和分析过程.该天线由一个矩形主辐射贴片和两个附属辐射枝节组成.主辐射贴片和两个附属枝节分别产生三个通带覆盖2.4/5.2/5.8GHz的WLAN工作频段和2.5/3.5/5.5GHz的WiMAX工作频段.天线的仿真结果表明,在WLAN频段以及WiMAX频段天线具有良好的阻抗带宽和辐射效率,天线的总尺寸为20mm×30mm×1.6 mm,结构紧凑,易于制作,适用于WLAN和WiMAX系统. 相似文献
11.
12.
针对现代通信系统终端小型化、宽频带的要求,本文提出了一种新型小型化宽频带平面倒F 天线。该天线由
金属地板、辐射贴片、短路贴片和馈电系统四部分组成。其中对地板进行十字缝隙开槽,短路贴片采用短路墙,馈电
系统采用二等分威尔金森功分器。采用HFSS13.0 软件对天线进行仿真,仿真结果表明,该天线在2.01~2.61GHz 频带
范围内驻波比小于2, 阻抗带宽达到26.3%;1.66~2.75GHz 频带范围内增益大于3dBi,增益带宽达到47.4%。同时,天
线的自由空间辐射方向图也满足无线通信终端要求。 相似文献
13.
This article proposes a novel printed monopole antenna for ultra wideband applications with dual band-notch function. The antenna consists of a disc-shaped radiating patch with a pair of folded strips arms, and a ground plane with a two L-shaped conductor backed plane, which provides a wide usable fractional bandwidth of more than 140 % (2.6–14.43 GHz). In order to generate single band-notch characteristics, we use a modified disc-shaped radiating patch with a pair of folded strips arms also by using this modified radiating patch, additional resonance is excited and hence much wider impedance bandwidth can be produced, especially at the higher band. By adding two L-shaped conductor backed plane in the ground plane a dual band notch function is achieved. The measured results reveal that the presented dual band-notch monopole antenna offers a very wide bandwidth with two notched bands, covering all the 5.2/5.8 GHz WLAN, 3.5/5.5 GHz WiMAX and 4 GHz C bands. The designed antenna has a small size of $12\times 18\,\hbox {mm}^{2}$ . 相似文献
14.
Surajit Mukherjee Avisankar Roy Smarajit Maity Tapas Tewary Koushik Dutta Sunandan Bhunia 《International Journal of Communication Systems》2023,36(15):e5565
An electromagnetic band gap (EBG) coupled miniaturized tri-notched printed ultra-wideband (UWB) monopole microstrip antenna having dimensions of 22 mm × 26 mm × 1.6 mm loaded with a slot in radiating patch and a parasitic strip in the ground plane has been presented. The proposed structure incorporates a square-shaped metallic radiating patch with a square EBG structure adjacent to the microstrip feed line, a U-shaped meandered slot over the radiating element, and a U-shaped parasitic resonator at the ground plane beneath the radiating element, to reject the C-band satellite downlink (3.7 to 4.2 GHz), WLAN frequency band (5.15 to 5.85 GHz), and X-band satellite downlink (7.25 to 7.75 GHz) frequency bands, respectively. The designed antenna operates in the frequency range from 3 to 11.1 GHz, with an impedance bandwidth of 8.1 GHz and a percentage bandwidth of 114%. Modification steps incorporating into the reference antenna to achieve the desired design objectives have been discussed, along with parametric studies. The proposed design has been simulated using Ansys HFSS, and measurement has been taken using standard measurement technique and compared with the simulated results. 相似文献
15.
The authors present an original application of a slot-fed patch antenna. Voltage controlled tuning varactors are connected across the radiating edges of the patch antenna and the resonant frequency can be adjusted in a large frequency band (up to 1 GHz) while the impedance matching remains good. Results based on the transmission line model are compared with measurements 相似文献
16.
A simple and compact ultra-wideband microstrip-fed planar antenna with dual bandstop characteristic is presented. By using a U-slot defected ground structure (DGS) in the feedline, a stopband of 600 MHz (from 5.45 to 6.05 GHz) for band rejection of WLAN is achieved. To obtain another stopband, an arched slot is etched on the radiating patch. Experimental results show that the designed antenna, with a compact size of 30 times 24.5 mm, has an impedance bandwidth of 2.8-11 GHz for voltage standing wave ratio (VSWR) less than 2, except two frequency stop-bands of 3.5-4.25 GHz and 5.45- 6.05 GHz. Moreover, the antenna has good omnidirectional radiation patterns in the H-plane. 相似文献
17.
《Electronics letters》2008,44(21):1231-1233
A compact ultra-wideband printed planar antenna with tri-band notched characteristic is presented. Two different types of slots are used to obtain tri-band notched characteristic. By using a U-slot defected ground structure, a notched band, 5?6 GHz for WLAN, is achieved. An H-shaped slot is etched on the radiating patch to obtain another two notched bands at 3.3?3.7 GHz for WiMAX and 7.2 GHz for some C-band satellite communication systems. The proposed antenna yields an impedance bandwidth of 3.1?10.6 GHz with VSWR , 2, except the notched bands. The antenna is successfully simulated and measured, showing tri-band notched characteristic can be obtained by using two different slots. 相似文献
18.
该文将磁电偶极子天线作为辐射阵子,并应用一种共面波导馈电网络,研究并设计了一种新型44毫米波天线阵列。这种设计不仅具有很宽的阻抗带宽和增益带宽,而且价格低廉易于生产。仿真和测试结果表明,此天线阵列的相对阻抗带宽为54.5%, 3 dB增益带宽为37.1%,在工作频带内(40.2~70.0 GHz),最大增益为18.1 dBi。而基于其他技术设计的44毫米波天线阵列(如微带天线、偶极子天线)工作频带宽度一般在20%左右,增益一般在16~17 dBi。所以该文提出的天线阵列设计具有明显的优势。另外,仿真设计结果和实测的电参数数据有较好的一致性。 相似文献