Effects of hydrogen injection strategy on the hydrogen mixture distribution and combustion of a gasoline/hydrogen SI engine under lean burn condition

Hydrogen is a carbon free energy carrier with high diffusivity and reactivity, it has been proved to be a kind of suitable blending fuel of spark ignition (SI) engine to achieve better efficiency and emissions. Hydrogen injection strategy affects the engine performance obviously. To optimize the combustion and emissions, a comparative study on the effects of the hydrogen injection strategy on the hydrogen mixture distribution, combustion and emission was investigated at a SI engine with gasoline intake port injection and four hydrogen injection strategies, hydrogen direct injection (HDI) with stratified hydrogen mixture distribution (SHMD), hydrogen intake port injection with premixed hydrogen mixture distribution (PHMD), split hydrogen direct injection (SHDI) with partially premixed hydrogen mixture distribution (PPHMD) and no hydrogen addition. Results showed that different hydrogen injection strategy formed different kinds of hydrogen mixture distribution (HMD). The ignition and combustion rate played an important role on engine efficiency. Since the SHDI could use two hydrogen injection to organize the HMD, the ignition and combustion rate with the PPHMD was the fastest. With the PPHMD, the brake thermal efficiency of the engine was the highest and the emissions were slight more than that with the PHMD. PHMD achieve the optimum emission performance by its homogeneous hydrogen. The engine combustion and emission performance can be optimized by adjusting the hydrogen injection strategy.     

Energy and exergy analysis of a combined injection engine using gasoline port injection coupled with gasoline or hydrogen direct injection under lean-burn conditions

Hydrogen is considered to be a suitable supplementary fuel for Spark Ignition (SI) engines. The energy and exergy analysis of engines is important to provide theoretical fundaments for the improvement of energy and exergy efficiency. However, few studies on the energy and exergy balance of the engine working under Hydrogen Direct Injection (HDI) plus Gasoline Port Injection (GPI) mode under lean-burn conditions are reported. In this paper, the effects of two different modes on the energy and exergy balance of a SI engine working under lean-burn conditions are presented. Two different modes (GPI + GDI and GPI + HDI), five gasoline and hydrogen direct injection fractions (0, 5%, 10%, 15%, 20%), and five excess air ratios (1, 1.1, 1.2, 1.3, 1.4) are studied. The results show that the cooling water takes the 39.40% of the fuel energy on average under GPI + GDI mode under lean-burn conditions, and the value is 40.70% for GPI + HDI mode. The exergy destruction occupies the 56.12% of the fuel exergy on average under GPI + GDI mode under lean-burn conditions, and the value is 54.89% for GPI + HDI mode. The brake thermal efficiency and exergy efficiency of the engine can be improved by 0.29% and 0.31% at the excess air ratio of 1.1 under GPI + GDI mode on average, and the average values are 0.56% and 0.71% for GPI + HDI mode.     

A review of hydrogen usage in internal combustion engines (gasoline-Lpg-diesel) from combustion performance aspect

Demand for fossil fuels is increasing day by day with the increase in industrialization and energy demand in the world. For this reason, many countries are looking for alternative energy sources against this increasing energy demand. Hydrogen is an alternative fuel with high efficiency and superior properties. The development of hydrogen-powered vehicles in the transport sector is expected to reduce fuel consumption and air pollution from exhaust emissions. In this study, the use of hydrogen as a fuel in vehicles and the current experimental studies in the literature are examined and the results of using hydrogen as an additional fuel are investigated. The effects of hydrogen usage on engine performance and exhaust emissions as an additional fuel to internal combustion gasoline, diesel and LPG engines are explained. Depending on the amount of hydrogen added to the fuel system, the engine power and torque are increased at most on petrol engines, while they are decreased on LPG and diesel engines. In terms of chemical products, the emissions of harmful exhaust gases in gasoline and LPG engines are reduced, while some diesel engines increase nitrogen oxide levels. In addition, it is understood that there will be a positive effect on the environment, due to hydrogen usage in all engine types.     

Effects of second hydrogen direct injection proportion and injection timing on combustion and emission characteristics of hydrogen/n-butanol combined injection engine

Hydrogen and n-butanol are superior alternative fuels for SI engines, which show high potential in improving the combustion and emission characteristics of internal combustion engines. However, both still have disadvantages when applied individually. N-butanol fuel has poor evaporative atomization properties and high latent heat of vaporization. Burning n-butanol fuel alone can lead to incomplete combustion and lower temperature in the cylinder. Hydrogen is not easily stored and transported, and the engine is prone to backfire or detonation only using hydrogen. Therefore, this paper investigates the effects of hydrogen direct injection strategies on the combustion and emission characteristics of n-butanol/hydrogen dual-fuel engines based on n-butanol port injection/split hydrogen direct injection mode and the synergistic optimization of their characteristics. The energy of hydrogen is 20% of the total energy of the fuel in the cylinder. The experimental results show that a balance between dynamics and emission characteristics can be found using split hydrogen direct injection. Compared with the second hydrogen injection proportion (IP2) = 0, the split hydrogen direct injection can promote the formation of a stable flame kernel, shorten the flame development period and rapid combustion period, and reduce the cyclic variation. When the IP2 is 25%, 50% and 75%, the engine torque increases by 0.14%, 1.50% and 3.00% and the maximum in-cylinder pressure increases by 1.9%, 2.3% and 0.6% respectively. Compared with IP2 = 100%, HC emissions are reduced by 7.8%, 15.4% and 24.7% and NOx emissions are reduced by 16.4%, 13.8% and 7.9% respectively, when the IP2 is 25%, 50% and 75%. As second hydrogen injection timing (IT2) is advanced, CA0-10 and CA10-90 show a decreasing and then increasing trend. The maximum in-cylinder pressure rises and falls, and the engine torque gradually decreases. The CO emissions show a trend of decreasing and remaining constant. However, the trends of HC emissions and NOx emissions with IT2 are not consistent at different IP2. Considering the engine's dynamics and emission characteristics, the first hydrogen injection proportion (IP1) = 25% plus first hydrogen injection timing (IT1) = 240°CA BTDC combined with IP2 = 75% plus IT2 = 105°CA BTDC is the superior split hydrogen direct injection strategy.     

The potential role of hydrogen as a sustainable transportation fuel to combat global warming

Hydrogen is recognized as a key source of the sustainable energy solutions. The transportation sector is known as one of the largest fuel consumers of the global energy market. Hydrogen can become a promising fuel for sustainable transportation by providing clean, reliable, safe, convenient, customer friendly, and affordable energy. In this study, the possibility of hydrogen as the major fuel for transportation systems is investigated comprehensively based on the recent data published in the literature. Due to its several characteristic advantages, such as energy density, abundance, ease of transportation, a wide variety of production methods from clean and renewable fuels with zero or minimal emissions; hydrogen appears to be a great chemical fuel which can potentially replace fossil fuel use in internal combustion engines. In order to take advantage of hydrogen as an internal combustion engine fuel, existing engines should be redesigned to avoid abnormal combustion. Hydrogen use in internal combustion engines could enhance system efficiencies, offer higher power outputs per vehicle, and emit lower amounts of greenhouse gases. Even though hydrogen-powered fuel cells have lower emissions than internal combustion engines, they require additional space and weight and they are generally more expensive. Therefore, the scope of this study is hydrogen-fueled internal combustion engines. It is also highlighted that in order to become a truly sustainable and clean fuel, hydrogen should be produced from renewable energy and material resources with zero or minimal emissions at high efficiencies. In addition, in this study, conventional, hybrid, electric, biofuel, fuel cell, and hydrogen fueled ICE vehicles are comparatively assessed based on their CO₂ and SO₂ emissions, social cost of carbon, energy and exergy efficiencies, fuel consumption, fuel price, and driving range. The results show that when all of these criteria are taken into account, fuel cell vehicles have the highest average performance ranking (4.97/10), followed by hydrogen fueled ICEs (4.81/10) and biofuel vehicles (4.71/10). On the other hand, conventional vehicles have the lowest average performance ranking (1.21/10), followed by electric vehicles (4.24/10) and hybrid vehicles (4.53/10).     

Study on combustion and emission characteristics of a n-butanol engine with hydrogen direct injection under lean burn conditions

The n-butanol fuel, as a renewable and clean biofuel, could ease the energy crisis and decrease the harmful emissions. As another clean and renewable energy, hydrogen properly offset the high HC emissions and the insufficient of dynamic property of pure n-butanol fuel in SI engines, because of the high diffusion coefficient, high adiabatic flame velocity and low heat value. Hydrogen direct injection not only avoids backfire and lower intake efficiency but also promotes to form in-cylinder stratified mixture, which is helpful to enhance combustion and reduce emissions. This experimental study focused on the combustion and emissions characteristics of a hydrogen direct injection stratified n-butanol engine. Three different hydrogen addition fractions (0%, 2.5%, 5%) were used under five different spark timing (10° ,15° ,20° ,25° ,30° CA BTDC). Engine speed and excess air ratio stabled at 1500 rpm and 1.2 respectively. The direct injection timing of the hydrogen was optimized to form a beter stratified mixture. The obtained results demonstrated that brake power and brake thermal efficiency are increased by addition hydrogen directly injected. The BSFC is decreased with the addition of hydrogen. The peak cylinder pressure and the instantaneous heat release rate raises with the increase of the hydrogen addition fraction. In addition, the HC and CO emissions drop while the NOx emissions sharply rise with the addition of hydrogen. As a whole, with hydrogen direct injection, the power and fuel economy performance of n-butanol engine are markedly improved, harmful emissions are partly decreased.     

A review of hydrogen as a compression ignition engine fuel

Diesel fuelled engines emit higher levels of carbon dioxide and other harmful air pollutants (such as noxious gases and particulates) per litre of fuel than gasoline engines. This fact, combined with the recent diesel emission scandal and the rumours of more widespread cheating by automotive manufacturers have initiated a long discussion about the future and sustainability of diesel engines.Improving the compression ignition engine is a direct way of going green. Reducing the harmful emissions can be achieved by future developments in the engine technology but also the implementation of alternative fuels. Hydrogen is a renewable, high-efficient and clean fuel that can potentially save the future of diesel-type engines. The evolution of high-efficiency renewable hydrogen production methods is the most important path for the start of a new hydrogen era for the compression ignition engine that can improve its sustainability and maximum efficiency.This paper provides a detailed overview of hydrogen as a fuel for compression ignition engines. A comprehensive review of the past and recent research activities on the topic is documented. The review focuses on the in-cylinder combustion of hydrogen either as a primary fuel or in dual fuel operation. The effects of injection strategies, compression ratio and exhaust gas recirculation on the combustion and emission characteristics of the hydrogen fuelled engine are fully analysed. The main limitations, challenges and perspectives are presented.     

Hydrogen fuel in scramjet engines - A brief review

Due to the wide flammability range and low ignition delay of Hydrogen, it can burn rapidly and generate a large amount of thrust. It is for this reason alone that many researchers have promoted hydrogen as a potential fuel in scramjet engines. As H₂ is also environmentally safe and clean and can be produced from abundant sources, several researchers across the globe support the use of H₂ fuel. However, its lower volumetric energy density and higher flammability range also have an adverse effect in on-board storage system for aircraft propulsion applications. This review gives a brief representation of Hydrogen fueled scramjet engine as well the challenges associated with H₂ fuel. Additionally, the advantage of hydrogen as a fuel as compared to other hydrocarbon fuel is also discussed here thoroughly.     

Natural-gas fueled spark-ignition (SI) and compression-ignition (CI) engine performance and emissions

Natural gas is a fossil fuel that has been used and investigated extensively for use in spark-ignition (SI) and compression-ignition (CI) engines. Compared with conventional gasoline engines, SI engines using natural gas can run at higher compression ratios, thus producing higher thermal efficiencies but also increased nitrogen oxide (NO_x) emissions, while producing lower emissions of carbon dioxide (CO₂), unburned hydrocarbons (HC) and carbon monoxide (CO). These engines also produce relatively less power than gasoline-fueled engines because of the convergence of one or more of three factors: a reduction in volumetric efficiency due to natural-gas injection in the intake manifold; the lower stoichiometric fuel/air ratio of natural gas compared to gasoline; and the lower equivalence ratio at which these engines may be run in order to reduce NO_x emissions. High NO_x emissions, especially at high loads, reduce with exhaust gas recirculation (EGR). However, EGR rates above a maximum value result in misfire and erratic engine operation. Hydrogen gas addition increases this EGR threshold significantly. In addition, hydrogen increases the flame speed of the natural gas-hydrogen mixture. Power levels can be increased with supercharging or turbocharging and intercooling. Natural gas is used to power CI engines via the dual-fuel mode, where a high-cetane fuel is injected along with the natural gas in order to provide a source of ignition for the charge. Thermal efficiency levels compared with normal diesel-fueled CI-engine operation are generally maintained with dual-fuel operation, and smoke levels are reduced significantly. At the same time, lower NO_x and CO₂ emissions, as well as higher HC and CO emissions compared with normal CI-engine operation at low and intermediate loads are recorded. These trends are caused by the low charge temperature and increased ignition delay, resulting in low combustion temperatures. Another factor is insufficient penetration and distribution of the pilot fuel in the charge, resulting in a lack of ignition centers. EGR admission at low and intermediate loads increases combustion temperatures, lowering unburned HC and CO emissions. Larger pilot fuel quantities at these load levels and hydrogen gas addition can also help increase combustion efficiency. Power output is lower at certain conditions than diesel-fueled engines, for reasons similar to those affecting power output of SI engines. In both cases the power output can be maintained with direct injection. Overall, natural gas can be used in both engine types; however further refinement and optimization of engines and fuel-injection systems is needed.     

An overview of hydrogen as a vehicle fuel

As hydrogen fuel cell vehicles move from manifestation to commercialization, the users expect safe, convenient and customer-friendly fuelling. Hydrogen quality affects fuel cell stack performance and lifetime, as well as other factors such as valve operation. In this paper, previous researcher's development on hydrogen as a possible major fuel of the future has been studied thoroughly. Hydrogen is one of the energy carriers which can replace fossil fuel and can be used as fuel in an internal combustion engines and as a fuel cell in vehicles. To use hydrogen as a fuel of internal combustion engine, engine design should be considered for avoiding abnormal combustion. As a result it can improve engine efficiency, power output and reduce NO_x emissions. The emission of fuel cell is low as compared to conventional vehicles but as penalty, fuel cell vehicles need additional space and weight to install the battery and storage tank, thus increases it production cost. The production of hydrogen can be ‘carbon-free’ only if it is generated by employing genuinely carbon-free renewable energy sources. The acceptability of hydrogen technology depends on the knowledge and awareness of the hydrogen benefits towards environment and human life. Recent study shows that people still do not have the sufficient information of hydrogen.     

Effect of manifold injection of hydrogen gas in producer gas and neem biodiesel fueled CRDI dual fuel engine

The high flammability of hydrogen gas gives it a steady flow without throttling in engines while operating. Such engines also include different induction/injection methods. Hydrogen fuels are encouraging fuel for applications of diesel engines in dual fuel mode operation. Engines operating with dual fuel can replace pilot injection of liquid fuel with gaseous fuels, significantly being eco-friendly. Lower particulate matter (PM) and nitrogen oxides (NO_x) emissions are the significant advantages of operating with dual fuel.Consequently, fuels used in the present work are renewable and can generate power for different applications. Hydrogen being gaseous fuel acts as an alternative and shows fascinating use along with diesel to operate the engines with lower emissions. Such engines can also be operated either by injection or induction on compression of gaseous fuels for combustion by initiating with the pilot amount of biodiesel. Present work highlights the experimental investigation conducted on dual fuel mode operation of diesel engine using Neem Oil Methyl Ester (NeOME) and producer gas with enriched hydrogen gas combination. Experiments were performed at four different manifold hydrogen gas injection timings of TDC, 5°aTDC, 10°aTDC and 15°aTDC and three injection durations of 30°CA, 60°CA, and 90°CA. Compared to baseline operation, improvement in engine performance was evaluated in combustion and its emission characteristics. Current experimental investigations revealed that the 10°aTDC hydrogen manifold injection with 60°CA injection duration showed better performance. The BTE of diesel + PG and NeOME + PG operation was found to be 28% and 23%, respectively, and the emissions level were reduced to 25.4%, 14.6%, 54.6%, and 26.8% for CO, HC, smoke, and NO_x, respectively.     

Hydrogen engine: research and development (R&D) programmes in Indian Institute of Technology (IIT), Delhi

Active research in the development of hydrogen-fuelled low-emission engines is being pursued at the Engines and Unconventional Fuels Laboratory of the Indian Institute of Technology (IIT), for a period of close to two decades. This paper highlights the significant pursuits and attainments of the research and development (R&D) activities carried out in IIT, Delhi on hydrogen-operated engines. Both spark ignition (SI) and compression ignition engine test rigs have been developed and instrumented for the use of hydrogen fuel. Several existing petroleum-fuelled engine configurations have been modified by taking care to observe that the converted system does not need substantial hardware modifications. Various fuel induction techniques have been experimentally evaluated keeping in view the temperamental combustion characteristic of this fuel. Curative and preventive steps have been adopted and suitable retrofits and subsystems have been installed at the appropriate locations to preclude the possibility of any undesirable combustion phenomena such as backfire, knocking and rapid rate of pressure rise. Performance, emission and combustion characteristics of the systems have been determined. It has been observed that an appropriately designed timed manifold injection system can overcome the problem of backfire in a hydrogen engine. NO_x emission level from a hydrogen-operated SI engine can be drastically reduced by way of lean engine operation.     

An experimental investigation on DI diesel engine with hydrogen fuel

The internal combustion engines have already become an indispensable and integral part of our present day life style, particularly in the transportation and agricultural sectors [Nagalingam B. Properties of hydrogen. In: Proceedings of the summer school of hydrogen energy, IIT Madras, 1984]. Unfortunately the survival of these engines has, of late, been threatened due to the problems of fuel crisis and environmental pollution. Therefore, to sustain the present growth rate of civilization, a nondepletable, clean fuel must be expeditiously sought. Hydrogen exactly caters to the specified needs. Hydrogen, even though “renewable” and “clean burning”, does give rise to some undesirable combustion problems in an engine operation, such as backfire, pre-ignition, knocking and rapid rate of pressure rise [Srinivasa Rao P. Utilization of hydrogen in a dual fueled engine. In: Proceedings of the summer school of hydrogen energy, IIT Madras, 1984; Siebers DL. Hydrogen combustion under diesel engine conditions. Hydrogen Energy 1998;23:363–71]. The present investigation compares the performance and emission characteristics of a DI diesel engine with gaseous hydrogen as a fuel inducted by means of carburation technique and timed port injection technique (TPI) along with diesel as a source of ignition [Swain N, Design and testing of dedicated hydrogen-fueled engine. SAE 961077, 1996]. In the present study the specific energy consumption, NO_x emission and the exhaust gas temperature increased by 6%, 8% and 14%, respectively, and brake thermal efficiency and smoke level reduced by 5% and 8%, respectively, using carburation technique compared to baseline diesel. But in the TPI technique, the specific energy consumption, exhaust gas temperature and smoke level reduced by 15%, 45% and 18%, respectively. The brake thermal efficiency and NO_x increased by 17% and 34%, respectively, compared to baseline diesel. The emissions such as HC, CO, and CO₂ is very low in both carburation and TPI techniques compared baseline diesel.     

An onboard hydrogen generator for hydrogen enhanced combustion with internal combustion engine

Hydrogen enhanced combustion (HEC) for internal combustion engine is known to be a simple mean for improving engine efficiency in fuel saving and cleaner exhaust. An onboard compact and high efficient methanol steam reformer is made and installed in the tailpipe of a vehicle to produce hydrogen continuously onboard by using the waste heat of the engine for heating up the reformer; this provides a practical device for the HEC to become a reality. This use of waste heat from engine enables an extremely high process efficiency of 113% to convert methanol (8.68 MJ) for 1.0 NM of hydrogen (9.83 MJ) and low cost of using hydrogen as an enhancer or as a fuel itself. The test results of HEC from the onboard hydrogen production are presented with 2 gasoline engine vehicles and 2 diesel engines; the results indicate a hike of engine efficiency in 15–25% fuel saving and a 40–50% pollutants reduction including 70% reduction of exhaust smoke. The use of hydrogen as an enhancer brings about 2–3 fold of net reductions in energy, carbon dioxide emission and fuel cost expense over the input of methanol feed for hydrogen production.     

Experimental investigation of varying composition of HCNG on performance and combustion characteristics of a SI engine

With rapid depletion of petroleum resources, researchers are investigating alternate fuels to meet global transportation energy demand. Gaseous fuels such as compressed natural gas (CNG) and hydrogen are of special interest because of their cleaner combustion characteristics compared to liquid petroleum based fossil fuels. However both these gaseous fuels have some technical issues when they are used as stand-alone alternate fuel in conventional spark ignition (SI) engines. CNG suffers from lower energy density and narrow flammability range whereas backfiring tendency is highly pronounced in hydrogen fueled engines. Hydrogen enriched compressed natural gas (HCNG) mixtures are observed to be good alternative to these individual fuels since these mixtures do not pose the issues experienced by the constituent fuels i.e. CNG and hydrogen. In this study, experiments were conducted in a spark ignited gas engine using various compositions of HCNG mixtures having 0, 10, 20, 30, 50, 70 and 100% (v/v) hydrogen fraction. The performance and combustion characteristics of these test fuels were compared with that of baseline CNG, in order to find an optimum HCNG mixture composition for a single cylinder gas engine. Results obtained showed that 30HCNG mixture delivered superior engine performance compared to other HCNG mixtures and baseline CNG, which is in sharp contrast to 15HCNG being advocated globally.     

Efficiency and pollutant emissions of an SI engine using biogas-hydrogen fuel blends: BIO60, BIO95, H20BIO60 and H20BIO95

Our planet has been experiencing abrupt climate changes in recent years. The major contributor to this phenomenon is, without doubt, emissions of gases derived from petroleum-based fuels, compared to their high consumption, especially diesel and gasoline. In Brazil, the sum of all motorized trips shows that more than half of them (60%) is based on public transport, with buses carrying 94% of all those who use this service. These vehicles, in their vast majority, use the technology of Compression Ignition (CI) engines. On the other hand, studies have shown that the country has a high biofuel production potential from various sources, such as landfills and hydroelectric plants, with an extensive production of biogas and hydrogen, that can be used, for example, in Spark Ignition (SI) engines. Nevertheless, SI engines have lower efficiency than CI engines. Part load operation of SI engines is conventionally achieved by the use of a throttle to control the airflow or air-fuel mixture into the engine. When operating at partial load the throttle causes exergy losses what affecting on decreasing engine efficiency. With the objective of analysing the emission of pollutants and the efficiency of conversion of fuel chemical energy, this work presents an analysis on the use of blends of hydrogen (H₂), biogas (BIO60) and methane (BIO95) using an SI engine. The system was operated in partial load and the addition of H₂ was an attempt to increase efficiency by reducing the pumping work through the throttle, once it was possible increasing the lambda value. The tests were performed at different ignition angles and air/fuel ratio. The value of ignition advance angle has been adjusted to obtain maximum Brake Thermal Efficiency (BTE) of the engine. It was possible to recognize that the addition of H₂ allowed the combustion limits to be extended. On the other hand, reduced values of CO and NO_x emissions could be achieved.     

On-board fuel processor modelling for hydrogen-enriched gasoline fuelled engine

Hydrogen as a fuel for automotive engines is generally coupled with advanced conversion systems (fuel cells) but, due to energy crises and environmental pollution, hydrogen fuelling of internal combustion engines is of great interest as well.In the near-term, the use of hydrogen as gasoline additional fuel in ICE is a very interesting and accredited approach. However the employment of hydrogen introduces problems in the fuel distribution and storage systems. These drawbacks could be overcome by using on-board hydrogen production systems.In this paper, a numerical model of a simple reforming system, based on a partial oxidation process, has been developed. The model has been tested using the experimental data of a plasma-assisted reformer. The conversions of methane, propane, heptane, toluene and gasoline to hydrogen have been investigated and a thermodynamic analysis of the reforming system has been conducted by means of the AspenPlus software. The efficiency of the reformer/engine system has been also evaluated.     

Design and sizing of stand-alone photovoltaic hydrogen system for HCNG production

Hydrogen from renewable energy sources is a clean and sustainable option as a fuel and is seen as a potential alternative to gasoline in the future. However, in the near future the use of hydrogen in internal combustion engines is possible at low fraction in mixture with compressed natural gas (HCNG fuel).     

Fuel conversion efficiency of a port injection engine fueled with gasoline–isobutanol blends

This paper describes the comparative advantages of using isobutanol as a fuel for SI (spark ignition) engines instead of ethanol. An experimental study of fuel conversion efficiency was performed on a port injection engine fueled with mixtures containing 10, 30 and 50% isobutanol blended with gasoline. Efficiency as well as performance levels were maintained within acceptable limits for all three types of fuel blends compared to running the engine on straight gasoline. These results show that isobutanol is an attractive drop-in fuel for SI engines, and can be blended with gasoline in much higher concentrations compared to ethanol, without any modifications to the fuel system or other engine components.     

Effects of hydrogenation of fossil fuels with hydrogen and hydroxy gas on performance and emissions of internal combustion engines

Energy security is an important consideration for development of future transport fuels. Among the all gaseous fuels hydrogen or hydroxy (HHO) gas is considered to be one of the clean alternative fuels. Hydrogen is very flammable gas and storing and transporting of hydrogen gas safely is very difficult. Today, vehicles using pure hydrogen as fuel require stations with compressed or liquefied hydrogen stocks at high pressures from hydrogen production centres established with large investments.Different electrode design and different electrolytes have been tested to find the best electrode design and electrolyte for higher amount of HHO production using same electric energy. HHO is used as an additional fuel without storage tanks in the four strokes, 4-cylinder compression ignition engine and two-stroke, one-cylinder spark ignition engine without any structural changes. Later, previously developed commercially available dry cell HHO reactor used as a fuel additive to neat diesel fuel and biodiesel fuel mixtures. HHO gas is used to hydrogenate the compressed natural gas (CNG) and different amounts of HHO-CNG fuel mixtures are used in a pilot injection CI engine. Pure diesel fuel and diesel fuel + biodiesel mixtures with different volumetric flow rates are also used as pilot injection fuel in the test engine. The effects of HHO enrichment on engine performance and emissions in compression-ignition and spark-ignition engines have been examined in detail. It is found from the experiments that plate type reactor with NaOH produced more HHO gas with the same amount of catalyst and electric energy. All experimental results from Gasoline and Diesel Engines show that performance and exhaust emission values have improved with hydroxy gas addition to the fossil fuels except NO_x exhaust emissions. The maximum average improvements in terms of performance and emissions of the gasoline and the diesel engine are both graphically and numerically expressed in results and discussions. The maximum average improvements obtained for brake power, brake torque and BSFC values of the gasoline engine were 27%, 32.4% and 16.3%, respectively. Furthermore, maximum improvements in performance data obtained with the use of HHO enriched biodiesel fuel mixture in diesel engine were 8.31% for brake power, 7.1% for brake torque and 10% for BSFC.