Influence of the type of quaternary ammonium salt used in the organic treatment of montmorillonite on the properties of poly(styrene‐co‐butyl acrylate)/layered silicate nanocomposites prepared by in situ miniemulsion polymerization

Hybrid latices of poly(styrene‐co‐butyl acrylate) were synthesized via in situ miniemulsion polymerization in the presence of 3 and 6 wt % organically modified montmorillonite (OMMT). Three different ammonium salts: cetyl trimethyl ammonium chloride (CTAC), alkyl dimethyl benzyl ammonium chloride (Dodigen), and distearyl dimethyl ammonium chloride (Praepagen), were investigated as organic modifiers. Increased affinity for organic liquids was observed after organic modification of the MMT. Stable hybrid latices were obtained even though miniemulsion stability was disturbed to some extent by the presence of the OMMTs during the synthesis. Highly intercalated and exfoliated polymer‐MMT nanocomposites films were produced with good MMT dispersion throughout the polymeric matrix. Materials containing MMT modified with the 16 carbons alkyl chain salt (CTAC) resulted in the largest increments of storage modulus, indicating that single chain quaternary salts provide higher increments on mechanical properties. Films presenting exfoliated structure resulted in the largest increments in the onset temperature of decomposition. For the range of OMMT loading studied, the nanocomposite structure influenced more significantly the thermal stability properties of the hybrid material than did the OMMT loading. The film containing 3 wt % MMT modified with the two 18 carbons alkyl chains salt (Praepagen) provided the highest increment of onset temperature of decomposition. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Effect of organic modifiers and silicate type on filler dispersion,thermal, and mechanical properties of ABS‐clay nanocomposites

Acrylonitrile–butadiene–styrene (ABS)–clay composite and intercalated nanocomposites were prepared by melt processing, using Na‐montmorillonite (MMT), several chemically different organically modified MMT (OMMT) and Na‐laponite clays. The polymer–clay hybrids were characterized by WAXD, TEM, DSC, TGA, tensile, and impact tests. Intercalated nanocomposites are formed with organoclays, a composite is obtained with unmodified MMT, and the nanocomposite based on synthetic laponite is almost exfoliated. An unintercalated nanocomposite is formed by one of the organically modified clays, with similar overall stack dispersion as compared to the intercalated nanocomposites. T_g of ABS is unaffected by incorporation of the silicate filler in its matrix upto 4 wt % loading for different aspect ratios and organic modifications. A significant improvement in the onset of thermal decomposition (40–44°C at 4 wt % organoclay) is seen. The Young's modulus shows improvement, the elongation‐at‐break shows reduction, and the tensile strength shows improvement. Notched and unnotched impact strength of the intercalated MMT nanocomposites is lower as compared to that of ABS matrix. However, laponite and overexchanged organomontmorillonite clay lead to improvement in ductility. For the MMT clays, the Young's modulus (E) correlates with the intercalation change in organoclay interlayer separation (Δd₀₀₁) as influenced by the chemistry of the modifier. Although ABS‐laponite composites are exfoliated, the intercalated OMMT‐based nanocomposites show greater improvement in modulus. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Influence of the clay modification and compatibilizer on the structure and mechanical properties of ethylene–propylene–diene rubber/montmorillonite composites

Ethylene–propylene–diene rubber (EPDM)/montmorillonite (MMT) composites were prepared through a melt process, and three kinds of surfactants with different ammonium cations were used to modify MMT and affect the morphology of the composites. The morphology of the composites depended on the alkyl ammonium salt length, that is, the hydrophobicity of the organic surfactants. Organophilic montmorillonite (OMMT), modified by octadecyltrimethyl ammonium salt and distearyldimethyl ammonium salt, was intercalated and partially exfoliated in the EPDM matrix, whereas OMMT modified by hexadecyltrimethyl ammonium chloride exhibited a morphology in which OMMT existed as a common filler. Ethylene–propylene–diene rubber grafted with maleic anhydride (MAH‐g‐EPDM) was used as a compatibilizer and greatly affected the dispersion of OMMT. When OMMTs were modified by octadecyltrimethyl ammonium chloride and distearydimethyl ammonium chloride, the EPDM/OMMT/MAH‐g‐EPDM composites (100/15/5) had an exfoliated structure, and they showed good mechanical properties and high dynamic moduli. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 638–646, 2004     

Solid‐state graft polymerization of styrene in spherical polypropylene particles in the presence of montmorillonite

In this work, cetyltrimethyl ammonium bromide and methacryloyloxyethyhrimethyl ammonium chloride were used to prepare organophilic montmorillonite (O‐MMT). Then, polypropylene (PP)–clay nanocomposites were prepared by the in situ grafting polymerization of styrene (St)‐containing O‐MMT onto PP with tert‐butyl perbenzoate as an initiator in the solid state. Fourier transform infrared spectroscopy, gel permeation chromatography, transmission electron microscopy, and X‐ray diffraction were applied to study the structure of the layered silicate and modified PP. The surfaces of the composites and, thus, the distribution of the clay in the PP matrix were characterized by scanning electron microscopy. The rheology and mechanical properties were studied and are discussed. According to the characterization results, OMMT and St were already grafted onto the PP main chain. Also, the intercalated structure of montmorillonite could be stabilized, and a stable exfoliated structure could be attained. Namely, intercalated PP/OMMT nanocomposites were obtained. The rheological results clearly show that these PP/OMMT nanocomposites had long‐chain‐branched structures. The peroxide modification of PP had minor effects on the tensile and bending strengths of the modified PP; however, this modification resulted in a significant reduction in the impact strength. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Intercalated clay structures and amorphous behavior of solution cast and melt pressed poly(ethylene oxide)–clay nanocomposites

The polymer nanocomposite (PNC) films consisted of poly(ethylene oxide) (PEO) and sodium cations montmorillonite (MMT) clay were prepared by aqueous solution casting and direct melt press compounding techniques, whereas the films of PEO with trimethyl octadecyl ammonium cations organo‐modified montmorillonite (OMMT) clay were formed by melt pressed technique. The clay concentrations in the nanocomposites used are 1, 2, 3, 5, 10, and 20 wt % of the PEO weight. The X‐ray diffraction patterns of these nanocomposites were measured in the angular range (2θ) of 3.8–30°. The values of basal spacing d₀₀₁ of MMT/OMMT, clay gallery width W_cg, d‐spacings of PEO crystal reflections d₁₂₀ and d₁₁₂, and their corresponding crystallite size L, and the peaks intensity I (counts) were determined for these nanocomposites. Results reveal that the nanocomposites have intercalated clay structures and the amount of intercalation increases with the increase of clay concentration. As compared to melt pressed PEO–MMT nanocomposites, the amount of clay intercalation is higher in aqueous solution cast nanocomposites. At 20 wt % MMT dispersion in PEO matrix, the solution cast PEO–MMT nanocomposite almost changes into amorphous phase. The melt press compounded PEO–OMMT films show more intercalation as compared to the PEO–MMT nanocomposites prepared by same technique. In melt pressed nanocomposites, the PEO crystalline phase significantly reduces when clay concentration exceeds 3 wt %, which is evidenced by the decrease in relative intensity of PEO principal crystalline peaks. The effect of interactions between the functional group (ethylene oxide) of PEO and layered sheets of clay on both the main crystalline peaks of PEO was separately analyzed using their XRD parameters in relation to structural conformations of these nanocomposites. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39898.     

Effect of ionomer on clay dispersions in polypropylene‐layered silicate nanocomposites

In this study, polypropylene (PP)/clay nanocomposites containing different concentrations of ethylene‐methacrylic acid ionomer (i.e. Surlyn®) were prepared, and the effect of ionomer on clay dispersion was studied via WAXD, rheology, SEM, and TEM. The role of the ionomer in the nanocomposites was compared with that of maleic anhydride grafted PP (PP‐g‐MA), which has been widely used as a compatibilizer in making PP/clay nanocomposites. With an increase in the concentration of compatibilizer, the position of d₀₀₁ peak of OMMT shifted toward a lower angle for PP‐g‐MA system, while the position remained almost unchanged for Surlyn system, in which a larger interlayer spacing (d₀₀₁) was found with respect to the former. In rheology, the addition of the ionomer led to a gradual increase in both moduli and complex viscosity, and the nonterminal behavior at low frequency was observed in both systems. In addition, the ternary hybrid containing 20 wt % Surlyn achieved the largest enhancement in relative viscosity, which was more than that of the nanocomposite prepared from pure Surlyn or pure PP, presumably indicative of the existence of strong interaction between the components. Finally, SEM and TEM micrographs demonstrated that exfoliated structure was preferred for PP/Surlyn/OMMT hybrids, while intercalated morphology for PP/PP‐g‐MA/OMMT. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 4024–4034, 2007     

Preparation of Clay/PMMA Nanocomposites with Intercalated or Exfoliated Structure for Bone Cement Synthesis

Summary: Clay/PMMA nanocomposites were prepared by melt blending of an organically modified MMT with PMMA under various process conditions. The MMT clay was initially cation exchanged with octadecylammonium to enhance its hydrophobicity and to expand the interlamellar space of the silicate plates. PMMA was then inserted into the inter‐lamellar space of the modified clay by melt blending at an elevated temperature. The effects of blending temperature, blending time, and clay/PMMA compositions on the level of expansion and homogenization were investigated. Composites with intercalated and/or exfoliated clay structure were obtained depending upon the process conditions, as confirmed by XRD diffractometry. The thermal decomposition temperature (T_d) and glass transition temperature (T_g) of the composites were determined, respectively, by TGA and DSC analyses. Marked improvements, up to 35 °C, of the thermal stability (T_d) with respect to pure PMMA were achieved for many of the composite samples. The T_g of the composites, however, does not increase accordingly. Furthermore, a novel type of bone cement was synthesized by applying the clay/PMMA nanocomposites as a substitute for PMMA in a typical formulation. These bone cements demonstrated much higher impact strength and better cell compatibility than the surgical Simplex P cement. Therefore, the bone cements with clay/PMMA nanocomposites meet the requirement for the architectural design of orthopedic surgery.

TEM images of an OA‐clay/PMMA composite.     

聚丙烯/蒙脱土纳米复合材料的制备与性能研究

采用十八烷基三甲基氯化铵（OTAC）和十二烷基二甲基卞基氯化铵（DDBAC）改性蒙脱土,以聚丙烯接枝马来酸酐（PP-g-MAH）作相容剂,通过熔融插层法制备了聚丙烯/蒙脱土纳米复合材料（PP/OMMT）.结果表明,PP-g-MAH能有效地改善PP与OMMT的相容性,当OTAC改性的蒙脱土（OMMT-O）用量为5wt%、PP-g-MAH用量为10wt%时,PP/PP-g-MAH/OMMT-O纳米复合材料的冲击强度为5.4 KJ/m^2,比纯PP提高了80%,极限氧指数（LOI）由PP的18提高到23.X射线衍射（XRD）测试表明,PP已经插层进入到蒙脱土片层中,部分蒙脱土产生了剥离.     

Studies on effect of improved d‐spacing of montomorillonite on properties of poly(vinyl chloride) nanocomposites

Surface modification of montomorillonite for improvement in d‐spacing was done by column chromatography with quaternary long chain ammonium salt having cation exchange capacity of 110 meq/100 g. Organically modified montomorillonite (OMMT)/poly(vinyl chloride) (PVC) nanocomposites were prepared through direct melt compounding on a conventional twin screw extruder. Because of improved d‐spacing of OMMT, the polymer chains get exfoliated in between the plates of clay and dispersed uniformly. The mechanical properties of the nanocomposites were found to be appreciable at 12 wt % loading of OMMT. Moreover, rheological data, such as torque, fusion time, viscosity, and shear rate were also recorded on Brabender Plasticorder. The improvement in mechanical properties with increase in amount of OMMT loading is evidenced from reduction in shear viscosity and torque. Also nanoclay is acting as a lubricating agent with packing effect, which reduces the torque with decrease in viscosity along with increment in elongation at break. Because of soft nature of OMMT and improvement in d‐spacing the processing of PVC becomes easier, and hence, OMMT is playing a dual role as a (i) good processing aid and (ii) filler. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Preparation,characterization, and properties of poly(vinyl chloride)/organophilic‐montmorillonite nanocomposites

Poly(vinyl chloride) (PVC)/organophilic‐montmorillonite (OMMT) nanocomposites were prepared by direct melt intercalation. PVC/compatibilizer ((vinyl acetate) copolymer (VAc))/OMMT nanocomposites were also prepared by melt intercalation by a masterbatch process. The effect of OMMT content on the nanostructures and properties of nanocomposites was studied. The nanostructures were studied by wide angle X‐ray diffraction (WAXD) and transmission electron microscopy (TEM). The linear viscoelastic properties and dynamic mechanical properties of PVC/OMMT nanocomposites were also investigated by an advanced rheometric expansion system (ARES) rheometer. The results showed that partially exfoliated and partially intercalated structures coexisted in the PVC/OMMT and PVC/VAc/OMMT nanocomposites. The mechanical properties test results indicated that the notched Charpy impact strengths of nanocomposites were improved compared to that of pristine PVC and had a maximum value at 1 phr OMMT loadings. The compatibilizer could further improve the impact strengths. But the existence of OMMT decreased the thermal stability of PVC/OMMT and PVC/VAc/OMMT nanocomposites. The linear viscoelastic properties test results indicated the dependence of G′ and G″ on ω shows nonterminal behaviors, and they had better processibility compared with pristine PVC. However, the glass transition temperatures of PVC/OMMT nanocomposites almost had little change compared to that of pristine PVC. POLYM. COMPOS., 27:55–64, 2006. © 2005 Society of Plastics Engineers     

Effect of polymer matrix/montmorillonite compatibility on morphology and melt rheology of polypropylene nanocomposites

In this study, Ca²⁺‐montmorillonite (Ca²⁺‐MMT) and organo‐montmorillonite (OMMT) were modified by three compatibilizers with different degrees of polarity [poly(ethylene glycol) (PEG), alkyl‐PEG, and polypropylene (PP)‐g‐PEG]. PP/MMT nanocomposites were prepared by melt blending and characterized using X‐ray diffraction and transmission electron microscopy. The results showed the degree of dispersion of OMMT in the PP/PP‐g‐PEG/OMMT (PMOM) nanocomposite was considerably higher than those in the PP/PEG/OMMT and PP/alkyl‐PEG/OMMT nanocomposites, which indicated that the dispersion was relative to the compatibility between modified OMMT and PP matrix. Linear viscoelasticity of PP/MMT nanocomposites in melt states was investigated by small amplitude dynamic rheology measurements. With the addition of the modified MMT, the shear viscosities and storage modulus of all the PP/MMT nanocomposites decreased. It can be attributed to the plasticization effect of PEG segments in the three modifiers. This rheological behavior was different from most surfactant modified MMT nanocomposites which typically showed an increase in dynamic modulus and viscosity relative to the polymer matrix. The unusual rheological observations were explained in terms of the compatibility between the polymer matrix and MMT. In addition, the mechanical properties of PP/MMT nanocomposites were improved. A simultaneous increase in the tensile strength and toughness was observed in PP/PMOM nanocomposites. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Morphology and mechanical properties of natural rubber latex films modified by exfoliated Na‐montmorillonite/polyethyleneimine‐g‐poly (methyl methacrylate) nanocomposites

Na‐montmorillonite/polyethyleneimine‐g‐poly(methyl methacrylate) (Na‐MMT/PEI‐g‐PMMA) nanocomposite latexes were prepared by soap‐free emulsion polymerization in the aqueous suspension of Na‐MMT. The exfoliated morphology of the nanocomposites was confirmed by XRD and TEM. With the aim of improving morphology and mechanical properties of natural rubber latex (NRL) films, the synthesized Na‐MMT/PEI‐g‐PMMA nanocomposites were mixed with NRL by latex compounding technology. The results of SEM and AFM analysis showed that the surface of NRL/Na‐MMT/PEI‐g‐PMMA film was smoother and denser than that of pristine NRL film while Na‐MMT was dispersed uniformly on the fracture surface of the modified films, which suggested the good compatibility between NRL and Na‐MMT/PEI‐g‐PMMA. The tensile strength of NRL/Na‐MMT/PEI‐g‐PMMA films was increased greatly by 85% with 10 phr Na‐MMT/PEI‐g‐PMMA when Na‐MMT content was 3 wt % and the elongation at break also increased from 930% to 1073% at the same time. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43961.     

Mesua ferrea L. seed oil based highly branched polyester/epoxy blends and their nanocomposites

Mesua ferrea L. seed oil based highly branched polyester and epoxy resins blends were prepared by mechanical mixing at different weight ratios. The best performing blend was used as the matrix for the preparation of nanocomposites with different dose levels of organophilic montmorillonite (OMMT) nanoclay. The prepared nanocomposites were characterized by X‐ray diffraction, scanning electron microscopy, Fourier transform infrared spectroscopy, and transmission electron microscopy. Data resulting from the mechanical and thermal studies of the blends and nanocomposites indicated improvements in the tensile strength and thermal stability to appreciable extents for the nanocomposites with OMMT loading. The nanocomposites were characterized as well‐dispersed, partially exfoliated structures with good interfacial interactions. From the X‐ray diffraction analysis, the absence of d₀₀₁ reflections of the OMMT clay in the cured nanocomposites indicated the development of an exfoliated clay structure, which was confirmed by transmission electron microscopy. The homogeneous morphologies of the pure polyester/epoxy blend and clay hybrid systems were ascertained with scanning electron microscopy. The tensile strength of the 5 wt % clay‐filled blend nanocomposite system was increased by 2.4 times compared to that of the pure blend resin system. The results suggest that the prepared nanocomposites have the potential to be used as active thin films for different applications. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Effects of processing history and annealing on polymorphic structure of nylon-6/montmorillonite nanocomposites

The effects of processing history and annealing treatment on the thermal property and polymorphic structure of nylon-6/clay nanocomposites (NCNs) have been investigated. The nanocomposites, including intercalated and exfoliated ones, were prepared by extruding nylon-6 (N6) with sodium montmorillonite (Na-MMT) or organo-montmorillonite (OMMT), respectively. DSC analysis revealed multiple melting endotherms in either the extruded or the injection-molded N6 and NCNs samples. It has been observed that a small exothermic peak around 195 °C just before the lower melting peak in the skin regions. We demonstrated that this sub-T_m transition was directly related to the processing-induced shear stresses. WAXD analysis was further performed to characterize the polymorphic structure of injection-molded N6 and NCNs before and after annealing. Annealing at a temperature (80 °C) above the T_g of N6 resulted in increase of the absolute content of γ-form in the skin regions and of the relative content of γ-form in the core regions of NCNs. In particular, annealing only leaded to increase the fraction of γ-form in the exfoliated N6/OMMT nanocomposites, which might be related to a confining effect of MMT platelet on the polymer chains mobility.     

Effect of clay modification on the morphological,mechanical, and thermal properties of polyamide 6/polypropylene/montmorillonite nanocomposites

Polyamide 6/polypropylene (PA6/PP = 70/30 parts) blends containing 4 phr (parts per hundred resin) of organophilic montmorillonite (OMMT) were prepared by melt compounding. The sodium montmorillonite (Na‐MMT) was modified using three different types of alkyl ammonium salts, namely dodecylamine, 12‐aminolauric acid, and stearylamine. The effect of clay modification on the morphological and mechanical properties of PA6/PP nanocomposites was investigated using x‐ray diffraction (XRD), transmission electron microscopy (TEM), tensile, flexural, and impact tests. The thermal properties of PA6/PP nanocomposites were characterized using thermogravimetric analysis (TGA), dynamic mechanical analysis (DMA), and heat distortion temperature (HDT). XRD and TEM results indicated the formation of exfoliated structure for the PA6/PP nanocomposites prepared using stearylamine modified montmorillonite. On the other hand, a mixture of intercalated and exfoliated structures was found for the PA6/PP nanocomposites prepared using 12‐aminolauric acid and dodecylamine modified montmorillonite. Incorporation of OMMT increased the stiffness but decreased the ductility and toughness of PA6/PP blend. The PA6/PP nanocomposite containing stearylamine modified montmorillonite showed the highest tensile, flexural, and thermal properties among all nanocomposites. This could be attributed to better exfoliated structure in the PA6/PP nanocomposite containing stearylamine modified montmorillonite. The storage modulus and HDT of PA6/PP blend were increased significantly with the incorporation of both Na‐MMT and OMMT. The highest value in both storage modulus and HDT was found in the PA6/PP nanocomposite containing stearylamine modified montmorillonite due to its better exfoliated structure. POLYM. COMPOS., 31:1156–1167, 2010. © 2009 Society of Plastics Engineers     

Reinforcing effect and isothermal crystallization kinetics of poly(3‐hydroxybutyrate) nanocomposites blended with organically modified montmorillonite

Organically modified montmorillonite (OMMT) has been incorporated up to 7 wt% in poly(3‐hydroxybutyrate) (PHB) by melt compounding in a twin screw extruder. PHB nanocomposites reinforced with C93A showed significant increase in tensile and flexural modulus and impact strength comparatively. Wide angle X‐ray diffraction showed an increase in overall d‐spacing indicating intercalated structure. The intercalation morphology was further supported by transmission electron microscope images indicating formation of intercalated structure in case of PHB/OMMT and a mixture of Intercalated/exfoliated structure in case of PHB/TMI‐MMT nanocomposites. Thermogravimetric analyses indicate that the thermal stability of PHB/TMI‐MMT nanocomposites is higher among all other nanocomposites under investigation and virgin PHB. Differential scanning calorimetry (DSC) analysis of PHB nanocomposites shows marginal increase in glass transition temperature and decrease in crystallization temperature compared to virgin PHB. The isothermal crystallization kinetics of PHB/C93A nanocomposites was investigated by DSC in the temperature range of 100–120°C and the development of relative crystallinity with the crystallization time was analyzed by Avrami equation. POLYM. COMPOS., 35:999–1012, 2014. © 2013 Society of Plastics Engineers     

A one‐pot method to prepare transparent poly(methyl methacrylate)/montmorillonite nanocomposites using imidazolium‐based ionic liquids

Poly(methyl methacrylate) (PMMA)/montmorillonite (MMT) nanocomposites were prepared by a new one‐pot technique, where the hydrophilic Na‐MMT layers were decorated with hydrophobic 1‐dodecyl‐3‐methylimidazolium hexafluorophosphate (C₁₂mimPF₆) ionic liquid in situ during melt blending with PMMA and intercalation of polymer chains took place subsequently. The in situ modification and intercalation of Na‐MMT were confirmed using X‐ray diffraction and transmission electron microscopy. The combination of the compatible C₁₂mimPF₆ with PMMA and the good dispersion of MMT layers at the nanoscale rendered the resultant PMMA/MMT nanocomposites with improved optical transparency, thermal stability and mechanical properties. Copyright © 2012 Society of Chemical Industry     

Mechanical properties,flame retardancy,and smoke suppression of lanthanum organic montmorillonite/poly(vinyl chloride) nanocomposites

A dimethyl dioctadecyl ammonium chloride modified organic montmorillonite (OMMT_‐I.44P)/poly(vinyl chloride) (PVC) nanocomposite and anionic‐surfactant‐modified lanthanum organic montmorillonite (La‐OMMT)/PVC nanocomposites (with three different anionic surfactants for the La‐OMMTs) were prepared via melt‐intercalation technology. The effects of the La‐OMMTs and OMMT_‐I.44P on the mechanical properties, flame retardancy, and smoke suppression of PVC were studied. X‐ray diffraction characterization showed that the La‐OMMTs were exfoliated in the PVC matrix. The mechanical properties of the nanocomposites were enhanced by the incorporation of the La‐OMMTs. Cone calorimetry and gas chromatography–mass spectrometry analyses indicated that the incorporation of the La‐OMMTs enhanced the flame retardancy and smoke suppression of the PVC nanocomposites. Scanning electron microscopy photos further showed that the residual char surfaces of La‐OMMT/PVC were all intact and, thus, provided better barriers to energy and smoke transport. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43951.     

Thermal aging and accelerated weathering of PVC/MMT nanocomposites: Structural and morphological studies

This work focuses on the influence of weathering factors—UV radiation, humidity, and temperature on the structure and morphology of poly(vinyl chloride)/montmorillonite (PVC/MMT) nanocomposites obtained by melt blending. It has been observed that organically modified MMT (OMMT) deteriorates the weathering resistance, the thermal behavior, as well as the long‐term stability of PVC. Decomposition of the organic modifier of MMT causes substantial color changes in the PVC nanocomposites as it facilitates the dehydrochlorination process of the polymer. However, the nonmodified MMT provides some stabilization during PVC weathering. The nanocomposites after annealing are characterized by higher glass transition temperature. The increase in heat capacity step (Δc_p) during glass transition suggests that in the PVC composites with nonmodified MMT stronger molecular interactions between the polymer and clay platelets occur than in PVC/OMMT nanocomposites. The scanning electron microscopy images on the surface and the cross section show that thermal aging and weathering proceed by different mechanisms. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42090.     

Synthesis and properties of poly(methyl methacrylate)/montmorillonite (PMMA/MMT) nanocomposites

PMMA/MMT nanocomposites were successfully synthesized via in situ intercalative polymerization, and characterized by means of wide‐angle X‐ray diffractometry, transmission electron microscopy, thermal gravimetric analysis, dynamic mechanical analysis and Fourier‐transform infrared analysis. The nanocomposites possess partially exfoliated and partially intercalated structure, in which the silicate layers are exfoliated into nanometre secondary particles with thickness of less than 20 nm and uniformly dispersed in the polymer matrix. In comparison with pure PMMA, the thermal stability, glass transition temperature, and mechanical properties of the polymer are notably improved by the presence of the nanometric silicate layers. It was found that part of the PMMA chains in the nanocomposites are well immobilized inside and/or onto the layered silicates and, therefore, the unique properties of the nanocomposites result from the strong interactions between the nanometric silicate layers and the polymer chains. Copyright © 2003 Society of Chemical Industry