Characteristic properties of cutting fluid additives derived from the derivatives of ricinoleic acid polymers

A number of esters were prepared from the reaction of acid chlorides with ricinoleic acid polymers and screened for anti-rust properties and antimicrobial activity in spent coolants of water-based cutting fluids. Aqueous solutions of triethanolamine salts with decanoic acid, undecanoic acid and oleic acid esters of ricinoleic acid dimer, trimer, tetramer and hexamer showed good anti-rust properties for water-based cutting fluids. Dehydrates of ricinoleic acid polymers also showed good anti-rust properties for water-based cutting fluids.     

Characteristic properties of cutting fluid additives derived from the adducts of diamines and acid chlorides

A number of N,N′-diacylalkyldiamines were prepared from the reaction of acid chlorides with 1,8-diaminooctane and 1,12-diaminododecane and screened for anti-rust properties and antimicrobial activity in spent coolants of water-based cutting fluids. Aqueous solutions of N,N′-dihexanoyl-1,8-diaminooctane and N,N′-isobutyroyl-1,12-diaminododecane showed good anti-rust properties for water-based cutting fluids. Aqueous emulsions of N,N′-dibutyroyl-, dipentanoyl-, dihexanoyl- and dioctanoyl-1,12-diaminododecane showed good lubricities and antimicrobial activity for water-based cutting fluids.     

Characteristic properties of cutting fluid additives derived from the reaction products of hydroxyl fatty acids with some acid anhydrides

Several adducts were prepared from the thermal reaction of hydroxyl fatty acids (ricinoleic acid oligomers, 12-hydroxystearic acid oligomers, oleyl alcohol, dehydrated castor oil fatty acids, and dimer acid) with maleic anhydride and screened as water-soluble cutting fluids. For example, aqueous solutions of triethanolamine salts with the products of ricinoleic acid oligomers, 12-hydroxystearic acid dimer, and 12-hydroxysteric acid hexamer showed good antirust properties for waterbased cutting fluids. Various half esters of hydroxyl fatty compounds with acid anhydrides were prepared. Aqueous solutions of triethanolamine salts of half esters of maleic anhydride and succinic anhydride and phthalic anhydride with hydroxyl fatty acids gave good antirust and antiwear properties for waterbased cutting fluids.     

Adducts of cyclic acid anhydrides and fatty amines as anti-rust additives in water-based cutting fluids

A variety ofN-alkyl carboxylic acid amides was prepared from the reaction of cyclic dicarboxylic acid anhydrides and various amines, and screened for anti-rust properties and antimicrobial activity in spent coolants of water-based cutting fluids. The triethanol amine salts of the adducts of maleic anhydride with octylamine, decylamine, dodecylamine and oleylamine, and the one of phthalic anhydride with octylamine showed both good anti-rust and antimicrobial activity.     

Characteristic properties of cutting fluid additives made from the derivatives of some polymeric nonionic surface-active agents

A series of esters was prepared from the reaction of acid chlorides with polymeric nonionic surface-active agents (copolymer of propylene oxide and ethylene oxide), and they were screened for antirust and other properties associated with water-based cutting fluids. An aqueous emulsion of an adduct of triethanolamine and the oleic acid ester of polymeric nonionic surface-active agent showed excellent antirust properties when used as a water-based cutting fluid. The emulsion of triethanolamine and the mono nonyl ether of the surface-active agent also showed antirust properties.     

Half esters of dibasic acids as additives in water-based cutting fluids

Several half esters from long chain dibasic acids were prepared, and corrosion and lubricity tests for these products as water-based cutting fluid additives were made. Triethanolamine salts of half esters of sebacic acid and dodecanedioic acid showed effective rust-inhibiting and anti-wear properties for water-based cutting fluids.     

Characteristic properties of cutting fluid additives derived from fatty alcohols

Many 3-aminopropyl alkyl ethers were prepared and their characteristics as water-based cutting fluids were examined. 3-Aminopropyl octyl-, decyl- and dodecyl ethers showed good lubricities and antimicrobial properties for a water-based cutting fluid.     

Water-soluble metalworking fluid additives derived from the derivatives of 3-mercaptopropionic acid

A number of derivatives of thiocarboxylic acid were prepared from the reaction of 3-mercaptopropionic acid and alkyl halides, and screened for anti-rust properties in water-soluble metalworking fluids. Aqueous metalworking fluids containing octylthiopropionic acid or hexylthioacetic acid showed excellent anti-rust properties for water-soluble metalworking fluids.     

Antimicrobial properties of boric acid esters of alcohols

A variety of boric acid esters of various alcohols were prepared and screened for antimicrobial activity in spent coolants of water-based cutting fluids. Boric acid esters of triethylene glycol, dipropylene glycol, geranic acid monodiethylene glycol and some hydroxy amines, such as 5-aminopentanol, showed good antimicrobial activity. To whom correspondence should be addressed.     

New additives derived from fatty acids for water-based cutting fluids

A variety of derivatives from long chain fatty acids were prepared, and corrosion and lubricity tests for these products as water-based cutting fluid additives were carried out. We have found that triethanolamine salts of 11-(carboxymethylthio)-undecanoic acid (II), 10,11-dichloromethylene undecanoic acid (IV) and 12-isovaleroyloxy stearic acid (VI) showed effective rust-inhibiting and anti-wear properties for water-based cutting fluids.     

水基防锈液对链轨节踏面热处理影响的研究

对水基防锈液是否影响链轨节踏面热处理质量进行了试验研究,并加以数据对比分析,结果显示水基防锈液对链轨节踏面热处理质量无影响。     

Excellent Properties of Dimer Fatty Acid Esters as Biolubricant Produced by Catalyst‐ and Solvent‐Free Esterification

Currently most technologies available to produce esters require acid or base catalysts for esterification or transesterification reactions. Production of dimerate esters (DE) exhibiting potential as a biolubricant for low temperature applications using catalyst‐ and solvent‐free approaches is presented in this article. Hydrogenated C₃₆ dimer acid and alcohol are reacted under the following conditions: dimer acid/alcohol (1:4.5 molar ratio), 150–200 °C, 24 h, 3Å molecular sieve (15% w/w). The performances of four DE species—dibutyl, dihexyl, di‐(2‐ethylhexyl), and dioctyl dimerate—as lubricant base stocks are evaluated by kinematic viscosity, viscosity index, cloud and pour point (cold flow properties) as well as oxidative stability, and compared with commercial synthetic lubricant base stock and DE, Radialube 7121. High viscosity indexes ranging between 129 and 138 are observed for the synthesized DEs, which are comparable with two commercial base stock, polyalpha olefin (PAO), and polyolester (POE). Significantly low pour point, less than ?42 °C, is observed for di‐(2‐ethylhexyl) dimerate attributed to the branching of the side chain. The DEs are categorized as ISO VG 68 based on their viscosity according to ISO 3448 classification and show potential as biolubricant with high viscosity index and excellent cold flow properties. Practical Applications: DFAE obtained have high potential to be used as lubricant base stock for equipment and machinery operating at extremely low temperature.     

Characteristic properties of water-soluble cutting fluids additives for iron materials

This review article describes preparations and properties of various types of water-soluble cutting fluids additives derived from various materials. It is concerned with synthetic additives classified according to their functional groups: carboxylic acids, esters, dibasic acids, ethers, amides, substituted fatty acids and others for iron materials. Testing methods for water-soluble cutting fluids are described on ways for laboratory and practical tests for factory.     

“四合一”金属切削液的研制

研制了一种适合多种金属（包括黑色金属，铜，铝）切削的“四合一”金属切削液，兼具冷却，润滑，清洗和防锈多重功效。     

Synthesis and evaluation of polytriethanolamine monooleates for oil-based muds

New emulsifiers were developed by esterification of polytriethanolamine based on the dimerization and trimerization of triethanolamine. The dimer and trimer were esterified with oleic acid to prepare monoesters of di-triethanolamine and tri-triethanolamine. The synthesized esters were evaluated as water-in-oil emulsifiers in oil-based muds, which are the circulating fluids used in rotary drilling to perform various functions required in the drilling operation, such as control of density, flow, and filtration properties. The dimer and trimer of triethanolamine were also esterified with hydrolyzed cottonseed oil, and the resulting esters were evaluated as commercial emulsifiers for oil-base muds.     

水溶性防锈添加剂的合成

以三乙醇胺、硼酸、十二烯基丁二酸为原料合成高性能防锈剂硼酸三乙醇胺酯十二烯基丁二酸酰胺,产品具有很好的防锈能力。     

Products from the reaction of fatty acids with ketones and their characteristic properties as cutting fluids additives

Hydroxy acids were synthesized in good yields from ketones and fatty acids by the use of lithium naphthalene in the presence of diethylamine. For example, from cyclohexanone and undecylenic acid (I), 2-(1-hydroxy-1-cyclohexyl)-10-undecenoic acid (III) was obtained in 92% yield. Hydroxy acids were treated withp-toluenesulphonic acid to give corresponding unsaturated fatty acids. From the reaction of (III), 2-(1-cyclohexenyl)-10-undecenoic acid (IV), a 3,4-unsaturated acid was obtained (yield 59%). Corrosion and lubricity tests for these products as water-based cutting fluid additives were carried out. We have found that triethanolamine salts of 2-cyclohexenyl and 2-hydroxycyclohexyl fatty acids showed effective rust-inhibiting and antiwear properties for water-based cutting fluids.     

一种低泡水基清洗剂的研制及应用

研制成功一种低泡水基清洗剂,适用于全自动清洗和超声波清洗。实验表明：与水以1：20稀释,清洗机件后,机件表面无残留油污,且对清洗机件具有很好的保护作用。与国外同类产品比较,在同样的清洗效果下,加强了防锈性能,低泡,无毒,使用安全、方便。     

Preparation of meadowfoam dimer acids and dimer esters,and their use as lubricants

Meadowfoam dimer acids have been prepared in a thermal clay-catalyzed reaction. Reaction conditions have been optimized, and yields of 44% were obtained with 2% water and 6–8% of an acid-washed montmorillonite clay, based on the meadowfoam fatty acids. Purity of the distilled dimer acids was 79–89% with most of the remaining 11–22% being residual mono- and tribasic acids. Dimethyl, di-(2-ethylhexyl), and di-n-butyl meadowfoam dimer ester derivatives were also prepared. Color, viscosity, and wear-preventive characteristics of the meadowfoam dimer acids and dimer ester derivatives were compared to those of commercial dimer acids and dimer esters. The viscosity of the meadowfoam dimer acids is similar to that of Empol® 1010, which is also derived from a highly monounsaturated fatty acid source. Viscosities of the meadowfoam dimer esters were also comparable to those of commercial dimer esters. Wear prevention characteristics, as determined by the four-ball test method, of the meadowfoam dimer acids and dimer esters were similar to those of the commercial products. In one case, the di-n-butyl esters, the meadowfoam derivative showed a significantly smaller wear scar than that shown by the di-n-butyl derivative of Unidyme® 14.     

Impact of physico-chemical properties of nanocellulose on rheology of aqueous suspensions and its utility in multiple fields: A review

Nanocellulose (NC), due to its sustainable nature, high aspect ratio, superior mechanical strength, and availability of functionalizable  OH groups, has been widely utilized as reinforcement in numerous fluids/plastics. The physico-chemical properties of NC, like surface characteristics, dimensions/aspect ratio and their concentration, significantly impact the interparticle interactions, such as the extent of hydrogen bonding, van der Waal forces, hydrophobicity, electrostatic attraction/repulsion, and cellulose entanglement, and have been found to play a critical role in regulating the overall rheological characteristics of fluids. The functionalized NC aqueous suspension exhibited unique shear thinning properties, thixotropic behavior, and quick steady-state viscosity recovery and viscoelastic properties. However, upon adding functionalized NC to other fluids, a different impact was noticed. For instance, it improved the viscosity, G′ and mechanical stability of bio-ink; the setting time and mechanical strength of cementitious fluids; increased the filtration performance and provided a unique thermo-thickening impact in case of water-based drilling-fluid; enhanced viscosity with time and heat in case of oil recovery, and so forth. Keeping in view the notable dependence of the rheology of fluids on NC additives, in the present review article, the impact of various physico-chemical properties of NC additives on the rheological behavior of NC aqueous suspension and its utility as a rheology modifier in multiple advanced fields has been explored. This review article, compared to previous studies, warrants an update on the impact of recent NC surface functionalization/blending techniques employed and NC aspect ratio on specific properties of multiple advanced fluids.