IPS‐mode dynamic LCD‐TV realization with low black luminance and high contrast by adaptive dynamic image control technology

Abstract— In this paper, an active backlight control technology and a data‐processing algorithm has been developed to improve the image quality in IPS‐mode LCD TVs. The image‐blinking problem caused by repeatedly abrupt changes in the backlight luminance was solved by using algorithms [Fba (flexible‐boundary algorithm) and Cfa (cumulative feedback algorithm)] and an optimized number of backlight dimming steps based on human perception. In the IPS‐mode 42‐in. TFT‐LCD panel, the dynamic contrast ratio can be more than twice the typical level by means of a lower black luminance and a higher white luminance. Additionally, the power consumption and LCD temperature were lowered.     

Spatio‐temporal scanning backlight mode for field‐sequential‐color optically‐compensated‐bend liquid‐crystal display

Abstract— A spatially and temporally scanning backlight consisting of ten isolated micro‐structured light guides has been developed to be combined with a fast‐response optically‐compensated‐bend‐mode field‐sequential‐color LCD in which the liquid‐crystal cell does not contain color filters. The sequential fields of three primary colors are generated by illumination of the red‐, green‐, and blue‐light‐emitting diodes, each illuminating for one‐half of the field, resulting in a luminance of 200 cd/m² for the LCD. The effect of light leakage between the blocks in the scanning backlight in field‐sequential‐color applications was measured and will be described.     

How to reduce light leakage and clipping in local‐dimming liquid‐crystal displays

Abstract— In conventional LCDs, the backlight is set to maximum luminance regardless of the image. For dark scenes, this approach causes light leakage and power waste. Especially, light leakage in dark scenes degrades the contrast ratio of LCDs; to circumvent this problem, local‐dimming systems have been proposed. In these systems, the LED backlight is divided into several local blocks and the backlight luminance of each local block is controlled individually, and pixel values are adjusted simultaneously according to the luminance profile of the dimmed backlight. In this paper, a method of determining the LED backlight luminance of each local block depending on the image is proposed; this method significantly improves the image quality of LCDs. First, we introduce methods of quantifying light‐leakage at dark gray levels and clipping at bright gray levels. Then, the proposed method to determine the dimming duty, which controls the LED backlight luminance by compromising between these two measures, was derived. The proposed algorithm preserves the original image with little clipping distortion and effectively reduces light leakage.     

White‐LED backlight control for motion‐blur reduction and power minimization in large LCD TVs

Abstract— A 1‐D LED‐backlight‐scanning technique and a 2‐D local‐dimming technique for large LCD TVs are presented. These techniques not only reduce the motion‐blur artifacts by means of impulse representation of images in video, but also increase the static contrast ratio by means of local dimming in the image(s). Both techniques exploit a unique feature of an LED backlight in large LCD TVs in which the whole panel is divided into a pre‐defined number of regions such that the luminance in each region is independently controllable. The proposed techniques are implemented in a Xilinx FPGA and demonstrated on a Samsung 40‐in. LCD TV. Measurement results show that the proposed techniques significantly reduce the motion‐blur artifacts, enhance the static contrast ratio by about 3×, and reduce the power consumption by 10% on average.     

Locally pixel‐compensated backlight dimming on LED‐backlit LCD TV

Abstract— The pixel brightness of an LCD panel perceived by a user is the product of the backlight brightness and the panel transmittance. In conventional LCD panels, the backlight brightness is constant and always at peak luminance. This design suffers from light leakage and power waste problems at dark scenes. This paper presents a new LCD system, which uses locally pixel‐compensated backlight dimming (PCBD). The proposed method combines backlight control and pixel processing for reducing light leakage and power consumption while keeping the image at the original brightness. Backlight luminance is dimmed locally in the dark‐image region, and pixel values are compensated synchronously according to the luminance profile of dimmed backlight. By reducing the light leakage, a static contrast of over 20,000:1 has been achieved on a large‐sized LCD panel with the proposed PCBD method. No obvious artifacts have been noticed as well. The power consumption of the panel can also be greatly reduced, depending on various video content. The PCBD method could be widely used for developing state‐of‐the‐art LCD panels with LED backlights.     

A field‐sequential‐color display with a local‐primary‐desaturation backlight scheme

Abstract— Field‐sequential‐color technology eliminates the need for color filters in liquid‐crystal displays (LCDs) and results in significant power savings and higher resolution. But the LCD suffers from color breakup, which degrades image quality and limits practical applications. By controlling the backlight temporally and spatially, a so‐called local‐primary‐desaturation (LPD) backlight scheme was developed and implemented in a 180‐Hz optically compensated bend (OCB) mode LCD equipped with a backlight consisting of a matrix of light‐emitting diodes (LEDs). It restores image quality by suppressing color breakup and saves power because it has no color filter and uses local dimming. A perceptual experiment was implemented for verification, and the results showed that a field‐sequential‐color display with a local‐primary‐desaturation backlight reduced the color breakup from very annoying to not annoying and even invisible.     

Power savings and enhancement of gray‐scale capability of LCD TVs with an adaptive dimming technique

Abstract— The luminance of a backlight unit for an LCD TV is adaptively and locally dimmed along with the input video signal in order to reduce the power consumption and also to improve the picture quality. By adopting the zero‐dimensional (0D), 1D, and 2D adaptive dimming techniques, a sample movie having 8.0% post‐gamma average picture levels (APL) could be displayed using 83%, 71%, and 50% of the original backlight power, respectively. For an adoption of the 2D dimming, an LED backlight is preferable. The adaptive‐dimming technique also allows the differential aging characteristics between the LED components and temperature dependence of color and luminance to be overcome. From simulations of a reduction in power consumption, it was found that 40 × 40 pixels is a unit of the local dimming, 30 frames for the sampling period, 24 dimming steps, and an equal‐signal‐step method for determining the dimming factor have been found to be appropriate. The gray‐scale capability of low‐luminance images can also be improved by dimming the backlight luminance and expanding the input signal. By using an LCD TV having an 8‐bit capability, an 11‐bit‐equivalent gray‐scale expression was experimentally proven.     

A broadband wide‐incident‐angle reflective polarization converter

Abstract— A high‐performance reflective polarization converter which could be used in a backlight recycling system for liquid‐crystal‐display (LCD) devices is proposed. The device consists of a twisted‐nematic (TN) liquid‐crystal film, a uniaxial A‐plate, and a reflector. The configuration parameters, such as thickness and orientation of the films, are optimized using a genetic algorithm. As a result, the design can convert light from TM to TE polarization (or TE to TM) at a maximum 99.7%, minimum 91.3%, and average 96.7% conversion efficiency for the entire visible spectrum and incident angle from 0 to 60°. Such a broadband reflective polarization converter is particularly useful for enhancing the light efficiency and reducing the power consumption of LCDs.     

High‐performance local‐dimming algorithm based on image characteristic and logarithmic function

With the emergence of high‐dynamic range (HDR) image and video, displaying an HDR image or video on a standard dynamic range displays with natural visual effect, clear details on local areas, and high‐contrast ratio has become an important issue. To achieve HDR, local‐dimming technique has been commonly practiced. In this paper, we investigate the problem of local dimming for LED‐backlight LC display to provide algorithm support for developing HDR displays. A novel local‐dimming algorithm is proposed to improve the contrast ratio, enhance the visual quality, and reduce the power consumption of the LCDs. The proposed algorithm mainly consists of two parts. The first part is a backlight luminance extraction method based on dynamic threshold and the maximum grayscale of an image block to improve the contrast ratio and reduce the power consumption. In the second one, a pixel compensation method based on logarithmic function is used to improve the visual quality and contrast ratio. At the same time, in order to better smooth the backlight diffusion at the edges of the backlight luminance signal to enhance the accuracy of the pixel compensation, we draw on the idea of BMA and improve it to establish the backlight diffusion model with different low‐pass‐filter templates for different types of blocks. Simulation and measured results show that the proposed algorithm outperforms the competing ones in contrast ratio, visual quality, and power‐saving ratio.     

A silicon‐chip‐based light valve with reflective twisted‐nematic mode for high‐definition projectors

Crystalline‐silicon‐chip‐based reflective light valves are suitable for realizing high definition and bright liquid‐crystal projectors. We have developed an XGA (1025 × 769 pixels) silicon‐chip‐based light valve with a diagonal display area of 2.54 cm (1 in.). The reflective twisted‐nematic mode was examined by using the Jones matrix method as a display mode, and the normally white reflective twisted‐nematic mode was selected. This mode is suitable for a narrow cell gap, and a fast response time can be expected. In addition, the driving voltage of this mode is low and has good chromaticity with small retardation. The cell gap of the light valve is 2 μm. The cell gap support is made using spacer posts formed on the silicon chip with a photodefinable resin. The response time is 12 msec, including both rise and fall times. The contrast ratio is more than 1000 at 5 Vrms.     

Wide gamut LCD using locally dimmable four‐primary‐color LED backlight

This paper proposes a wide gamut LCD using locally dimmable four‐primary‐color (4PC) LED backlight. Although the color gamut of LCDs has been improved in recent years, it is insufficient to reproduce all the colors in the real world. The objective of this paper is to propose a wide gamut LCD that reproduces all the colors in the real world while keeping the cost increases to a minimum. We evaluated the color gamut reproduced by LEDs of multiple primary colors and selected cyan as the optimal color to be added to the three primary colors to reproduce all the colors in the real world. Therefore, we designed an LED backlight consisting of an additional only‐cyan LED with three‐primary‐color LEDs and developed a prototype LCD with 4PC LED backlight. Furthermore, we developed a local dimming algorithm for the 4PC LED backlight. As a result, we confirmed that the prototype LCD with the 4PC LED backlight is able to cover almost all the colors in the real world and also able to display natural images with highly saturated colors by local dimming.     

Switching directional BLUs for full‐resolution auto‐stereoscopic 3D/2D and 2D/3D LCDs

Directional backlight unit (BLU) design concept was applied to realize full‐resolution field alternate auto‐stereoscopic liquid crystal displays (LCDs) with built‐in 3D/2D and 2D/3D. The application‐oriented BLU design requires priority in realizing 2D mode or 3D mode. The switching characteristic of BLU with two confronting illuminating sets was applied to build 2D mode into 3D display and 3D mode into 2D display. An LCD with 2D mode as primary function requires higher double‐sided luminance uniformity than 3D mode. On the other hand, an LCD with 3D mode requires higher single‐sided luminance uniformity than 2D mode. For increasing the double‐sided luminance uniformity for 2D mode as a primary function of the display, the former BLU design was realized by using uniform prismatic structure, that is, using uniform bilateral prismatic structure with a cross section of isosceles triangle on the back surface of the light‐guide plate. For increasing single‐sided luminance uniformity for 3D mode as a primary function of the display, the latter was realized by using graded angle design, that is, unilateral prisms with a cross section of a scalene triangle on the back surface of the light‐guide plate. The LCDs of small‐sized‐handheld game devices and still cameras were fabricated using the 3D/2D and 2D/3D displays.     

Efficacy of global dimming backlight and high‐contrast liquid crystal panel for high‐dynamic‐range displays

Using an RGB organic light‐emitting diode display to emulate liquid crystal display systems, we examined the efficacy of different global dimming strategies for cinematic content. A global dimming solution with smoothed transitions was preferred over solutions using a static backlight level or the highly aggressive frame‐by‐frame backlight adjustment scheme. We compared two such smoothing approaches, one making use of causal data, and another using future information (which could be available via latency or dynamic metadata) and did observe some opportunities for an improved experience, but found the causal data to be a competitive approach. We also evaluated the importance of native panel contrast and how global dimming compares to local dimming approaches. For most content tested, a global dimming display with a high‐contrast liquid crystal panel was judged as being equivalent or more preferred to a full‐array local dimming display with a low‐contrast panel. These results build on the existing evidence that native panel contrast remains one of the strongest predictors of high‐dynamic‐range image quality even as backlight technologies continue to improve.     

Ultra‐FFS TFT‐LCD with super image quality,fast response time,and strong pressure‐resistant characteristics

Fringe‐field‐switching (FFS) devices using liquid‐crystal (LC) with a negative dielectric anisotropy exhibit high transmittance and wide viewing angle simultaneously. Recently, we have developed an “Ultra‐FFS” thin‐film‐transistor (TFT) LCD using LC with a positive dielectric anisotropy that exhibits high transmittance, is color‐shift free, has a high‐contrast ratio in a wide range, experiences no crosstalk and has a fast response time of 25 msec. In this paper, the device concept is discussed, and, in addition, the pressure‐resistant characteristics of the devices compared with that of the twisted‐nematic (TN) LCD is discussed.     

LED‐backlight feedback control system with integrated amorphous‐silicon color sensor on an LCD panel

Abstract— Thin‐film‐transistor liquid‐crystal displays (TFT‐LCDs) have the largest market share of all digital flat‐panel displays. An LCD backlighting system employing a three‐color red‐green‐blue light‐emitting diode (RGB‐LED) array is very attractive, considering its wide color gamut, tunable white point, high dimming ratio, long lifetime, and environmental compatibility. But the high‐intensity LED has problems with thermal stability and degradation of brightness over time. Color and white luminance levels are not stable over a wide range of temperature due to inherent long‐term aging characteristics. In order to minimize color point and brightness differences over time, optical feedback control is the key technology for any LED‐backlight system. In this paper, the feasibility of an optical color‐sensing feedback system for an LED backlight by integrating the amorphous‐silicon (a‐Si) color sensor onto the LCD panel will be presented. To minimize the photoconductivity degradation of a‐Si, a new laser exposure treatment has been applied. The integrated color‐sensor optical‐feedback‐controlled LED‐backlight system minimized the color variation to less than 0.008 Δu'v' (CIE1976) compared to 0.025 for an open‐loop system over the temperature range of 42–76°C.     

Color‐breakup suppression and low‐power consumption by using the Stencil‐FSC method in field‐sequential LCDs

Abstract— Field‐sequential color (FSC) is a potential technique for low‐power liquid‐crystal displays (LCDs). However, it still experiences a serious visual artifact, color break‐up (CBU), which degrades image quality. Consequently, the “Stencil Field‐Sequential‐Color (Stencil‐FSC)” method, which applies local color‐backlight‐dimming technology at a 240‐Hz field rate to FSC‐LCDs, is proposed. Using the Stencil‐FSC method not only suppressed CBU efficiently but also enhanced the image contrast ratio by using low average power consumption. After backlight signal optimization, the Stencil‐FSC method was demonstrated on a 32‐in. FSC‐LCD and effectively suppressed the CBU, which resulted in more than a 27,000:1 dynamic contrast ratio and less than 40‐W average power consumption.     

Viewing‐angle compensation of TN‐ and ECB‐LCD modes by using a rod‐like liquid‐crystalline polymer film

Abstract— A liquid‐crystal line retardation‐film technology by using a rod‐like liquid‐crystalline polymer (LCP) for various LCD modes have been developed. In particular, considerable improvements in viewing‐angle performance have been achieved for the twisted‐nematic (TN) and the transmissive/transflective electrically controlled birefringence (ECB) modes by using hybrid aligned nematic film (NH Film).     

Transflective twisted‐nematic liquid‐crystal display with double twisted‐nematic cell and twisted liquid‐crystal retarder

Abstract— Two configurations, (i) a double‐cell‐gap twisted nematic (DTN) liquid‐crystal display (LCD) and (ii) a single‐cell‐gap twisted‐nematic (TN) liquid‐crystal display (LCD) using a twisted LC retarder, were optimized for transflective liquid‐crystal displays. For the DTN configuration, both the single‐cell‐gap approach and the double‐cell‐gap approach were considered. The optimized configurations exhibit a high contrast ratio, wide viewing angles, and achromatic (black/white) switching in both the transmissive and reflective modes. They are easy to fabricate and also possess a perfect dark state. Both are suitable for high‐quality transflective TFT‐LCDs.     

Energy‐efficient liquid‐crystal displays (e2‐LCDs) using a photonic‐crystal backlight system

Abstract— Cholesteric liquid crystals automatically form one‐dimensional photonic crystals. For a photonic crystal in which light‐emitting moieties are embedded, unique properties such as microcavity effects and simultaneous light emission and light reflection can be expected. Three primary‐color photonic‐crystal films were prepared based on cholesteric liquid crystal in which fluorescent dye is incorporated. Microcavity effects, i.e., emission enhancement and spectrum narrowing, were observed. Two types of demonstration liquid‐crystal displays (LCDs) were fabricated using the prepared photonic‐crystal films in a backlight system. One is an area‐color LCD in which a single photonic‐crystal layer is used for each color pixel and the other is a full‐color TFT‐LCD in which three stacked photonic‐crystal layers are used as light‐conversion layers. The area‐color LCD was excited by using 365‐nm UV light, and the full‐color TFT‐LCD was excited by using 470‐nm blue LED light. Because of the photonic crystal's unique features that allow it to work as light‐emitting and light‐reflecting layers simultaneously, both LCDs demonstrate clear readable images even under strong ambient light, such as direct‐sunlight conditions, under which conventional displays including LCDs and OLED displays cannot demonstrate clear images. In particular, an area‐color LCD, which eliminated color filters, gives clear images under bright ambient light conditions even without backlight illumination. This fact suggests that a backlight system using novel photonic‐crystal layers will be suitable for energy‐efficient LCDs (e²‐LCDs), especially for displays designed for outdoor usage.