NO reduction by CH4 over Pd/Co-sulfated zirconia catalysts

A series of sulfated zirconia supported Pd/Co catalysts was synthesized by the sol–gel method and examined for NO_x reduction by methane. The NO conversion increased up to a Co/S ratio of 0.43, and then decreased at a higher Co loading (Co/S = 0.95). Sulfate content was also essential for obtaining high selectivity to molecular nitrogen. A catalyst loaded with 0.06 wt.% Pd, 2.1 wt.% Co and 2.1 wt.% S (Pd/Co-SZ-2) exhibited remarkable performance under lean conditions and displayed stability in a long-term durability test using a synthetic reaction mixture containing 10% water vapor. This catalyst exhibited the highest sulfur retention most probably as cobalt sulfide. Besides, the catalytic oxidation of NO to NO_y groups was confirmed by FT-IR, in agreement with the general mechanism for the SCR of NO by hydrocarbons. In the absence of oxygen in the feed stream, the catalyst was highly active for NO reduction with methane. IR stretching bands assigned to N₂O and adsorbed nitro groups were identified upon adsorbing NO on Pd/Co-SZ-2. This indicates that under rich conditions disproportionation of NO to N₂O and NO₂ occurs and confirms that the formation of NO₂ species is an essential step for NO reduction by CH₄.     

FTIR study of aqueous nitrate reduction over Pd/TiO2

The interactions between Pd/TiO₂ catalyst and the reactants and potential reaction intermediates present during aqueous nitrate reduction, including NO₃⁻, NO₂⁻ and NO in the presence of H₂ and H₂O were studied by infrared spectroscopy. Adsorbed forms of NO, nitrite and nitrate could all be detected in the presence of water. In the presence of water/H₂, nitrate was the most stable surface species followed by nitrite and then highly reactive NO, suggesting that the reduction of nitrate to nitrite is the rate-limiting step. High concentrations of adsorbed nitrite appear to be linked to the detection of gaseous N₂O while the formation of ammonia is related to reactions on the Pd surface and the extent of formation is linked to high levels of adsorbed NO in addition to the surface hydrogen availability and the presence of water.     

Reduction of nitric oxide with methane on Pd/Co/H-ZSM-5 catalysts: cooperative effects of Pd and Co

Reduction of low concentration of nitric oxide (NO) with methane as a reductant under wet conditions has been investigated using Pd/Co/H-ZSM-5 catalysts and the effects brought about by coexistence of Pd and Co are discussed. The role of Co is attributed to the acceleration of oxidation of NO to NO₂, which is the necessary species for reduction of NO with CH₄ on Pd sites. A Pd/H-ZSM-5 loading of 1 wt% Co shows a maximum activity for NO reduction as well as for NO oxidation. Excess loading of Co led to a decrease in activity for NO reduction. An XPS study shows that Pd and Co are well dispersed inside the zeolite when the concentrations of Pd and Co are less than 1 wt%. Loading of excess Co, however, causes aggregation of Pd on the surface of ZSM-5.     

Combined effect of H2O and SO2 on V2O5/AC catalysts for NO reduction with ammonia at lower temperatures

Combined effect of H₂O and SO₂ on V₂O₅/AC the activity of catalyst for selective catalytic reduction (SCR) of NO with NH₃ at lower temperatures was studied. In the absence of SO₂, H₂O inhibits the catalytic activity, which may be attributed to competitive adsorption of H₂O and reactants (NO and/or NH₃). Although SO₂ promotes the SCR activity of the V₂O₅/AC catalyst in the absence of H₂O, it speeds the deactivation of the catalyst in the presence of H₂O. The dual effect of SO₂ is attributed to the SO₄²⁻ formed on the catalyst surface, which stays as ammonium-sulfate salts on the catalyst surface. In the absence of H₂O, a small amount of ammonium-sulfate salts deposits on the surface of the catalyst, which promote the SCR activity; in the presence of H₂O, however, the deposition rate of ammonium-sulfate salts is much greater, which results in blocking of the catalyst pores and deactivates the catalyst. Decreasing V₂O₅ loading decreases the deactivation rate of the catalyst. The catalyst can be used stably at a space velocity of 9000 h⁻¹ and temperature of 250 °C.     

Inhibition effect of H2O on V2O5/AC catalyst for catalytic reduction of NO with NH3 at low temperature

The inhibition effect of H₂O on V₂O₅/AC catalyst for NO reduction with NH₃ is studied at temperatures up to 250 °C through TPD, elemental analyses, temperature-programmed surface reaction (TPSR) and FT-IR analyses. The results show that H₂O does not reduce NO and NH₃ adsorption on V₂O₅/AC catalyst surface, but promotes NH₃ adsorption due to increases in Brønsted acid sites. Many kinds of NH₃ forms present on the catalyst surface, but only NH₄⁺ on Brønsted acid sites and a small portion of NH₃ on Lewis acid sites are reactive with NO at 250 °C or below, and most of the NH₃ on Lewis acid sites does not react with NO, regardless the presence of H₂O in the feed gas. H₂O inhibits the SCR reaction between the NH₃ on the Lewis acid sites and NO, and the inhibition effect increases with increasing H₂O content. The inhibition effect is reversible and H₂O does not poison the V₂O₅/AC catalyst.     

Broadening of the effective temperature range for NO removal on Co·Pd-modified H-ZSM-5 catalyst by suppression of CH4 combustion

Broadening the effective temperature range (window) of NO removal on Co·Pd-modified H-ZSM-5 (Co/Pd/H-ZSM-5) in the presence of methane under an excess-oxygen condition was tried under the concept that the lack of the amount of methane occurred by CH₄ combustion at high temperature reduced NO conversion to N₂. The activity for NO removal of the catalyst at high temperature was improved due to suppression of methane combustion by the thermal treatment of Pd in a H₂-containing flow. Co/Pd/H-ZSM-5s with and without the thermal treatment of Pd showed different temperature windows for NO elimination. These different windows were then combined by a two-stage catalyst packing, in which Co/(Pd/H-ZSM-5)_red. and Co/Pd/H-ZSM-5 were placed in series, resulting in the broadening of the window. This revised version was published online in July 2006 with corrections to the Cover Date.     

Aromatisation of propane over Ga/H-ZSM-5: comments on the activation of propane

The aromatisation of propane has been studied using Ga₂O₃, H-ZSM-5 and physical mixtures of Ga₂O₃/H-ZSM-5 as catalysts. Experiments using co-fed reactants of H₂, O₂ and NO are described, together with the use of 2-chloro-propane as a model reactant. The results are discussed in terms of a mechanism for the formation of the initial product propene in which propane is activated at the interface between the gallium oxide and the zeolite. The system is therefore an example of contact synergy and furthermore experiments are described that provide evidence for the reversible formation for the active site for this catalyst system.     

Selective catalytic reduction of N2O in industrial emissions containing O2, H2O and SO2: behavior of Fe/ZSM-5 catalysts

The catalytic behavior in N₂O reduction by propane in the presence of O₂, H₂O and SO₂ of Fe/ZSM-5 catalysts prepared by ion exchange and chemical vapour deposition (CVD) is reported. The catalyst prepared by CVD shows a lower dependence of the rate of selective N₂O reduction on the decrease in C₃H₈ to N₂O ratio in the feed and a higher resistance to deactivation by SO₂ in accelerated durability tests with high SO₂ concentration (500 ppm). This catalyst shows stable catalytic behavior in the presence of SO₂ for more than 600 h of time-on-stream. Characterization of the catalysts by UV–VIS–NIR diffuse reflectance indicates that the poor performances of the sample prepared by ion exchange could be related to the presence of highly clustered Fe³⁺ species, in this catalyst. On the other hand, Fe₂O₃ particles are not present in the sample prepared by CVD while mainly isolated Fe³⁺ ions and iron-oxide nanoclusters are present.     

Influence of CO2 and H2O on NOx storage and reduction on a Pt–Ba/γ-Al2O3 catalyst

In this paper, the effect of CO₂ and H₂O on NO_x storage and reduction over a Pt–Ba/γ-Al₂O₃ (1 wt.% Pt and 30 wt.% Ba) catalyst is shown. The experimental results reveal that in the presence of CO₂ and H₂O, NO_x is stored on BaCO₃ sites only. Moreover, H₂O inhibits the NO oxidation capability of the catalyst and no NO₂ formation is observed. Only 16% of the total barium is utilized in NO storage. The rich phase shows 95% selectivity towards N₂ as well as complete regeneration of stored NO. In the presence of CO₂, NO is oxidized into NO₂ and more NO_x is stored as in the presence of H₂O, resulting in 30% barium utilization. Bulk barium sites are inactive in NO_x trapping in the presence of CO₂·NH₃ formation is seen in the rich phase and the selectivity towards N₂ is 83%. Ba(NO₃)₂ is always completely regenerated during the subsequent rich phase. In the absence of CO₂ and H₂O, both surface and bulk barium sites are active in NO_x storage. As lean/rich cycling proceeds, the selectivity towards N₂ in the rich phase decreases from 82% to 47% and the N balance for successive lean/rich cycles shows incomplete regeneration of the catalyst. This incomplete regeneration along with a 40% decrease in the Pt dispersion and BET surface area, explains the observed decrease in NO_x storage.     

Two conversion maxima at 373 and 573 K in the reduction of nitrogen monoxide with hydrogen over Pd/TiO2 catalyst

Supporting Pt and Pd catalysts have been examined for the reduction of NO with H₂ in the presence of oxygen and moisture. All catalysts showed a conversion maximum in the NO reduction at around 373 K. An additional conversion maximum was found to appear at around 573 K over several metal oxides supporting Pd, and Pd/TiO₂ gave the highest conversion at around 573 K among the catalysts tested. In the reaction at 373 K, NO might be reduced directly by H₂ both on Pt and Pd catalysts to give N₂ and N₂O. At the conversion maximum of the Pd/TiO₂ catalyst at 575 K, however, in situ generated NO₂ seems to react with H₂.     

Enhanced activity of an In–Fe2O3/H-ZSM-5 catalyst for NO reduction with methane

Selective reduction of NO by CH₄ on an In–Fe₂O₃/H-ZSM-5 catalyst was investigated in the presence of excess oxygen. Compared with In/H-ZSM-5, the In–Fe₂O₃/H-ZSM-5 catalyst with high Fe₂O₃ contents showed higher activity in a wide range of reaction temperatures. It was found that the addition of Fe₂O₃ yielded a promotion effect on CH₄ activation. The influence of water vapor on NO conversion was also investigated. The activity of the In/H-ZSM-5 catalyst has been found to be strongly inhibited by water vapor, while the In–Fe₂O₃/H-ZSM-5 catalyst remained fairly active in the presence of 3.3% steam.     

The role of lanthana loading on the catalytic properties of Pd/Al2O3-La2O3 in the NO reduction with H2

The role of La₂O₃ loading in Pd/Al₂O₃-La₂O₃ prepared by sol–gel on the catalytic properties in the NO reduction with H₂ was studied. The catalysts were characterized by N₂ physisorption, temperature-programmed reduction, differential thermal analysis, temperature-programmed oxidation and temperature-programmed desorption of NO.

The physicochemical properties of Pd catalysts as well as the catalytic activity and selectivity are modified by La₂O₃ inclusion. The selectivity depends on the NO/H₂ molar ratio (GHSV = 72,000 h⁻¹) and the extent of interaction between Pd and La₂O₃. At NO/H₂ = 0.5, the catalysts show high N₂ selectivity (60–75%) at temperatures lower than 250 °C. For NO/H₂ = 1, the N₂ selectivity is almost 100% mainly for high temperatures, and even in the presence of 10% H₂O vapor. The high N₂ selectivity indicates a high capability of the catalysts to dissociate NO upon adsorption. This property is attributed to the creation of new adsorption sites through the formation of a surface PdO_x phase interacting with La₂O₃. The formation of this phase is favored by the spreading of PdO promoted by La₂O₃. DTA shows that the phase transformation takes place at temperatures of 280–350 °C, while TPO indicates that this phase transformation is related to the oxidation process of PdO: in the case of Pd/Al₂O₃ the O₂ uptake is consistent with the oxidation of PdO to PdO₂, and when La₂O₃ is present the O₂ uptake exceeds that amount (1.5 times). La₂O₃ in Pd catalysts promotes also the oxidation of Pd and dissociative adsorption of NO mainly at low temperatures (<250 °C) favoring the formation of N₂.     

The effect of hydrogen on the selective catalytic reduction of NO in excess oxygen over Ag/Al2O3

The selective catalytic reduction (SCR) of nitrogen oxides (NO_x) by propane in the presence of H₂ on sol–gel prepared Ag/Al₂O₃ catalysts (0.5–5 wt.% Ag) was investigated. It was confirmed that hydrocarbon-assisted SCR of NO_x is remarkably enhanced by co-feeding hydrogen to a lean exhaust gas mixture (λ>1), attaining considerable activity within a wide temperature window (470–825 K). The samples had marginal activity at 575 K without co-fed H₂, but achieved up to 60% NO_x conversion in the presence of H₂ at a space velocity of 30,000 h⁻¹. NO₂ as NO_x feed component is not converted to N₂ by C₃H₈ to a substantial extent under lean conditions. This points to an activation route of NO through direct conversion to adsorbed nitrite/nitrate or to a dissociation of NO over Ag⁰, formed through short-term reduction by H₂. The nature of Ag species was characterized by X-ray diffraction, temperature-programmed reduction, pulse thermoanalytical measurements, electron microscopy and FTIR spectroscopy. It could be shown that Ag₂O nano-sized clusters are predominantly present on all samples, whereas formation of silver aluminate could not be confirmed. Nano-sized Ag₂O clusters can reversibly be reduced/reoxidized by H₂. A silver loading higher than 2 wt.% leads to a part of Ag₂O particles, which are thermally decomposed during calcination at 800 K or higher. The catalytic role of this metallic silver is still unclear. Formal kinetic analysis of catalytic data revealed that the activation energy of the overall reaction is significantly lowered in the presence of H₂. The presence of water does not change the activation energy. It is concluded that hydrogen reduces the nano-sized Ag₂O clusters to Ag⁰ on a short-term scale. Zero-valent silver promotes a dissociation pathway of NO_x conversion. The fact that more oxidized ad-species (nitrite/nitrate) are observed in the presence of H₂ is attributed to a dissociative activation of gas-phase oxygen on Ag⁰.     

Water vapor sensitivity of nanosized La(Co, Mn, Fe)1−x(Cu, Pd)xO3 perovskites during NO reduction by C3H6 in the presence of oxygen

A series of La(Co, Mn, Fe)_1−x(Cu, Pd)_xO₃ perovskites having high specific surface areas and nanosized crystal domains was prepared by reactive grinding. The solids were characterized by N₂ adsorption, X-ray diffraction (XRD), scanning electron microscopy (SEM), temperature programmed desorption (TPD) of O₂, NO + O₂, C₃H₆, in the absence or presence of 5% H₂O, Fourier transform infrared (FTIR) spectroscopy, as well as activity tests towards NO reduction by propene under the conditions of 3000 ppm NO, 3000 ppm C₃H₆, 1% O₂, 0 or 10% H₂O, and 50,000 h⁻¹ space velocity. The objective was to investigate the influence of H₂O addition on catalytic behavior. A good performance (100% NO conversion, 77% N₂ yield, and 90% C₃H₆ conversion) was achieved at 600 °C over LaFe_0.8Cu_0.2O₃ under a dry feed stream. With the exposure of LaFe_0.8Cu_0.2O₃ to a humid atmosphere containing 10% water vapor, the catalytic activity was slightly decreased yielding 91% NO conversion, 51% N₂ yield, and 86% C₃H₆ conversion. A competitive adsorption between H₂O vapor with O₂ and NO molecules at anion vacancies over LaFe_0.8Cu_0.2O₃ was found by means of TPD studies here. A deactivation mechanism was therefore proposed involving the occupation of available active sites by water vapor, resulting in an inhibition of catalytic activity in C₃H₆ + NO + O₂ reaction. This H₂O deactivation was also verified to be strictly reversible by removing steam from the feed.     

Role of lanthanide elements on the catalytic behavior of supported Pd catalysts in the reduction of NO with methane

In this study, the role of lanthanide elements (Ce, Gd, La, and Yb) on Pd/TiO₂ catalysts in the catalytic reduction of NO with methane was investigated. Steady-state reaction experiments in the presence of oxygen showed that the addition of lanthanide elements increases the oxygen resistance of the catalyst. The post-reaction XPS characterization results revealed that majority of the Pd sites remained in the zero oxidation state in the presence of Ce or Gd. The effect of SO₂ (145 ppm) and H₂O (0–6.6%) in NO–CH₄–O₂ reaction over supported Pd and Gd–Pd catalysts was also investigated. Over the Gd–Pd catalyst with the presence of SO₂, more than 70% NO conversion was obtained for over 6 h while the Pd only catalyst showed a sharper drop in NO conversion. Over the Gd–Pd catalyst, the presence of H₂O showed no effect on NO conversion activity (>99% conversion) during the 18 h the catalyst was kept on stream. Among the lanthanide elements tested, Gd is the most effective, allowing the use of above stoichiometric oxygen concentration.     

Reactor and in situ FTIR studies of Pt/BaO/Al2O3 and Pd/BaO/Al2O3 NOx storage and reduction (NSR) catalysts

The reduction of NO under cyclic “lean”/“rich” conditions was examined over two model 1 wt.% Pt/20 wt.% BaO/Al₂O₃ and 1 wt.% Pd/20 wt.% BaO/Al₂O₃ NO_x storage reduction (NSR) catalysts. At temperatures between 250 and 350 °C, the Pd/BaO/Al₂O₃ catalyst exhibits higher overall NO_x reduction activity. Limited amounts of N₂O were formed over both catalysts. Identical cyclic studies conducted with non-BaO-containing 1 wt.% Pt/Al₂O₃ and Pd/Al₂O₃ catalysts demonstrate that under these conditions Pd exhibits a higher activity for the oxidation of both propylene and NO. Furthermore, in situ FTIR studies conducted under identical conditions suggest the formation of higher amounts of surface nitrite species on Pd/BaO/Al₂O₃. The IR results indicate that this species is substantially more active towards reaction with propylene. Moreover, its formation and reduction appear to represent the main pathway for the storage and reduction of NO under the conditions examined. Consequently, the higher activity of Pd can be attributed to its higher oxidation activity, leading both to a higher storage capacity (i.e., higher concentration of surface nitrites under “lean” conditions) and a higher reduction activity (i.e., higher concentration of partially oxidized active propylene species under “rich” conditions). The performance of Pt and Pd is nearly identical at temperatures above 375 °C.     

Relative rates of various steps of NO–CH4–O2 reaction catalyzed by Pd/H-ZSM-5

Reaction mechanism of the reduction of nitrogen monoxide by methane in an oxygen excess atmosphere (NO–CH₄–O₂ reaction) catalyzed by Pd/H-ZSM-5 has been studied at 623–703 K in the absence of water vapor, in comparison with the mechanism for Co-ZSM-5. Kinetic isotope effect for the N₂ formation in NO–CH₄–O₂ vs. NO–CD₄–O₂ reactions was 1.65 at 673 K and decreased with a decrease in the reaction temperature. In addition, H–D isotopic exchange took place significantly in NO–(CH₄+CD₄)–O₂ reaction. These results are in marked contrast with the case of Co-ZSM-5, for which the C–H dissociation of methane is the only rate-determining step, and show that the C–H dissociation is slow but not the only rate-determining step in the case of Pd/H-ZSM-5.

A reaction scheme was proposed, in which the relative rates of the three steps ((i)–(iii) below) vary depending on the reaction conditions.

Further, in contrast to Co-ZSM-5, NO_x–CH₄–O₂ reaction was much slower than CH₄–O₂ reaction for Pd/H-ZSM-5; the presence of NO_x retards the reaction of CH₄ over the latter catalyst, while it accelerates the reaction over the former. It is suggested that CH₄ is activated directly by the Pd atoms in the case of Pd/H-ZSM-5, but by NO₂ strongly adsorbed on Co ion for Co-ZSM-5. The reaction order of the NO–CH₄–O₂ reaction with respect to NO pressure was consistent with this mechanism; 1.05 for Pd/H-ZSM-5 and 0.11 for Co-ZSM-5.     

Determination of active palladium species in ZSM-5 zeolite for selective reduction of nitric oxide with methane

The active site in ZSM-5 zeolite-supported palladium, which shows the catalytic activity for NO reduction with methane as a reducing agent, has been investigated qualitatively and quantitatively by means of NO chemisorption and NaCl titration, comparing with PdO supported on silica. Palladium species in 0.4 wt.% Pd loaded H-ZSM-5 can adsorb NO equimolarly after calcination at 773 K, and almost all the NO was desorbed at around 673 K, while the palladium species on PdO/SiO₂ hardly adsorbed NO. The palladium species in Pd(0.4)/H-ZSM-5 are ion-exchangeable with Na⁺ in NaCl solution, indicating that they exist in a cationic state of an isolated Pd²⁺. This method for quantitative analysis of the isolated Pd²⁺ cations is named as ‘NaCl titration’. The amount of the isolated Pd²⁺ cationic species increased with increasing palladium content on Pd/H-ZSM-5, and PdO co-existed above 1 wt.%. The amount of the isolated Pd²⁺ cation was unchanged after the reaction of NO₂–CH₄, NO₂–CH₄–O₂, or CH₄–O₂ at 673 K, while the adsorbed amount of NO per the Pd²⁺ as determined by NO-TPD decreased after the NO₂–CH₄–O₂ reaction. It was found by NaCl titration that the catalytic activity of Pd/H-ZSM-5 for NO₂–CH₄–O₂ reaction increased with increasing amount of the isolated Pd²⁺ cationic species up to 0.7 wt.%, while the increase in the amount of PdO led to decrease in selectivity towards NO₂ reduction. The palladium species that are active and selective for NO reduction with CH₄ will be proposed.     

Catalytic reduction of NOx with H2/CO/CH4 over PdMOR catalysts

Conversion of NO_x with reducing agents H₂, CO and CH₄, with and without O₂, H₂O, and CO₂ were studied with catalysts based on MOR zeolite loaded with palladium and cerium. The catalysts reached high NO_x to N₂ conversion with H₂ and CO (>90% conversion and N₂ selectivity) range under lean conditions. The formation of N₂O is absent in the presence of both H₂ and CO together with oxygen in the feed, which will be the case in lean engine exhaust. PdMOR shows synergic co-operation between H₂ and CO at 450–500 K. The positive effect of cerium is significant in the case of H₂ and CH₄ reducing agent but is less obvious with H₂/CO mixture and under lean conditions. Cerium lowers the reducibility of Pd species in the zeolite micropores. The catalysts showed excellent stability at temperatures up to 673 K in a feed with 2500 ppm CH₄, 500 ppm NO, 5% O₂, 10% H₂O (0–1% H₂), N₂ balance but deactivation is noticed at higher temperatures. Combining results of the present study with those of previous studies it shows that the PdMOR-based catalysts are good catalysts for NO_x reduction with H₂, CO, hydrocarbons, alcohols and aldehydes under lean conditions at temperatures up to 673 K.     

Formation of Pd nanoparticles in surfactant-mesoporous silica composites and surfactant solutions

Highly dispersed palladium nanoparticles containing mesoporous silicas MCM-41 and MCM-48 were prepared by one-pot synthesis. The method consists of the simultaneous formation of CTA⁺ surfactant templating MCM-41 mesophase and CTA⁺ micelle-capped PdO, which was reduced by hydrogen to Pd metal with particle size ≈ 2 nm and was observed to stay inside the mesochannels of MCM-41 (pore size ≈ 3.8 nm) by TEM, XAS, and PXRD. During hydrothermal synthesis of Pd/MCM-48, Pd nanoparticles of average size ≈ 6–7 nm were deposited on the MCM-48 of pore size = 4 nm. The deposition is probably derived from ethanol reduction of Pd(II) complex generated from PdCl₂ precursor by hydrolysis of TEOS and C₁₂H₂₅(OCH₂CH₂)₄OH surfactant. The formation of Pd(0) from Pd(II) species in solid mesoporous silicas by hydrogen reduction was monitored by in situ XAS, and compared with the formation of Pd(0) from [PdCl₄]²⁻, [PdCl₃(H₂O)], and Pd(OH)₂ by sodium dodecyl sulfate surfactant and alcohol reduction in aqueous solutions.