ATM-based transport architecture for multiservices wirelesspersonal communication networks

This paper presents an ATM-based transport architecture for next-generation multiservices personal communication networks (PCN). Such “multimedia capable” integrated services wireless networks are motivated by an anticipated demand for wireless extensions to future broadband networks. An ATM compatible wireless network concept capable of supporting a mix of broadband ISDN services including constant bit-rate (CBR), variable bit-rate (VBR), and packet data transport is explored from an architectural viewpoint. The proposed system uses a hierarchical ATM switching network for interconnection of PCN microcells, each of which is serviced by high-speed, shared-access radio links based on ATM-compatible cell, relay principles. Design issues related to the physical (modulation), media access control (MAC), and data-link layers of the ATM-based radio link are discussed, and preliminary technical approaches are identified in each case. An example multiservice dynamic reservation (MDR) TDMA media access protocol is then considered in further detail, and simulation results are presented for an example voice/data scenario with a proportion of time-critical (i.e., multimedia) packet data. Time-of-expiry (TOE) based queue service disciplines are also investigated as a mechanism for improving the quality-of-service (QoS) in this scenario     

A multimedia STM switch prototype

There is no doubt the concept of ATM (asynchronous transfer mode) has gripped the technical community and has raised the hope for truly integrated voice, data, imaging, and video services. Such a dream was never possible before because of the diverse bandwidth requirements of each service type. Existing narrowband switches could not possibly keep up with widely varying channel bandwidth or the enormous aggregate bandwidth required. New methods of signaling would also be required to support new broadband services. The signaling itself might need varying degrees of bandwidth, and would likely be carried in the same stream as the data, yet be easily distinguishable. A common unit of information in the form of a 53 byte cell, including a header that helps determine the final destination of that cell, was adopted as the broadband integrated services digital network (B-ISDN) standard. While a great deal of work has progressed on ATM since the standard was adopted, there remains a camp that voices concerns as to the technical challenges that face deployment of ATM for certain services. In particular, concerns have been raised questioning the use of ATM networks to effectively route traffic that is constant-bit-rate (CBR) in nature and highly correlated. Voice and video services are of particular interest because of their potential economic markets. While it is almost certain that ATM, given enough time and resources, will prove its ability to handle these services, it behooves us to look for alternatives based on experience with existing telecommunications products. We present work completed in this area     

ATM DQDB城域网中恒定比特率业务的性能（Ⅱ）;延时分析

本文分析了ＡＴＭ ＤＱＤＢ城域网中恒定比特率业务的时延特性，恒定比特率业务比可变化特率数据业务的优先级高，但两者都采用统一的分组方式进行传输。本文的分析表明，在业务负荷不是非常重的情况下，恒定比特率业务的时延性能还是令人满意的，从而说明了ＡＴＭ ＤＱＤＢ城域网的可行性。     

ATM DQDB城域网中恒定比特率业务的性能（Ⅰ）：缓存器设计

ＡＴＭ ＤＱＤＢ城域网可以采用纯ＡＴＭ方式支持综合业务，本文着重研究了ＡＴＭ ＤＱＤＢ城域网中的恒定比特率业务的性能，用一个四维Ｍａｒｋｏｎ链来描述网络中一标记节点的状态，给出了稳态方程和排队长度的幸存函数。本文的分析方法和结果已用于“宽带光纤区域网原理模型”科研项目中的缓存容量设计。     

ATM网络抗毁和自恢复技术研究

基于ATM/MPLS技术的通信网络是承载宽带多媒体业务的综合平台。为了对承载业务进行抗毁保护,对ATM的最基本的1+1、1∶1、m∶n抗毁保护结构进行了研究和总结。同时结合网络传输层,如:PDH、SDH、WDM、MPLS的保护和应用层业务,如:IP、电路交换、以太网和帧中继的抗毁迂回策略,提出了ATM的多层次抗毁自恢复组网结构,为ATM的应用研究提供了借鉴。     

OAM mechanisms for BISDN UNI and access networks

This paper clarifies operation and maintenance (OAM) requirements for broadband integrated services digital network (BISDN) customer access systems including user-network interface (UNI), and proposes basic OAM mechanisms. Access networks employ a logical networking architecture based on the asynchronous transfer mode (ATM) virtual path (VP) concept to provide all services efficiently, economically. Services are independent of the network's physical configuration. Thus, OAM functions for the access network are required to support physical and ATM layer capabilities. UNI physical performance and failure information flows to ensure user service quality are described. A fault localization mechanism is introduced that determines whether the failure lies on the network provider side or customer side. It uses failure information flows and loop back testing at the network terminator 1 (NT1). As connection-related virtual path connection (VPC) availability indication is necessary for user-to-network applications and user-to-user applications, two alternative VPC-related availability indication mechanisms are studied. Furthermore, basic performance monitoring mechanisms for ATM layer are described.     

The MainStreetXpress core services node-a versatile ATM switcharchitecture for the full service network

Switching systems based on the ATM principle have outgrown the experimental stage, and are already used today in private and corporate networks, as well as in public wide area networks to provide regular service. ATM has the inherent ability to provide a common basis for transmission and switching functionality in both local and wide area networks. With the potential to support all services available today as well as those envisaged for the future, ATM holds a strong promise for network operators and end customers. To fully exploit this potential, ATM switch architectures are required which provide versatility and modularity in supporting services and protocols, independent scalability of data throughput and control performance over a wide range, and also reliability features adaptable to the respective application scenario. This paper describes in some detail how the MainStreetXpress core services node, which has evolved from the prototype described by Fischer et. al. (1991) to a mature central office ATM switch, addresses these issues and provides a future-proof architecture incorporating all of the features required in the B-ISDN era     

Implementing integrated and differentiated services for theInternet with ATM networks: a practical approach

This article reports on design, implementation, and preliminary experimentation of a network architecture that supports quality of service for Internet applications. It gives an overview of the various approaches toward communication networks that support application-specific degrees of QoS. Special emphasis is put on the integrated and differentiated services approaches and on combinations of them. A new architecture is described which aims to bring these concepts closer to practical realization in wide-area networks. The new architecture supports the integrated as well as differentiated services approaches in a smoothly integrated way, and uses the capabilities of an underlying ATM network to realize QoS. The enhancements to the existing network infrastructure are deliberately limited to the integration of a single new type of network element called an edge device. The potential benefits of such an architecture for various stakeholders are explained, and how the new architecture could be introduced smoothly in existing networks by small migration steps, also covering networks based on technologies other than ATM. It is shown that the approach can be scaled up to a very large QoS-aware overlay network for the Internet     

Transport of IP controlled-load service over ATM networks

A hot topic in the research community is the interworking of integrated IP services, defined by the IETF, with ATM, a technology designed for the transport of multimedia traffic. In particular, the IETF recommends the ATM CBR, nrt-VBR, and ABR service classes for the transport of controlled-load service (CLS) over ATM. In this work the first two alternatives are examined and compared, in order to determine which is the most convenient for CLS. The comparison is carried out in terms of QoS and amount of buffering required at the IP/ATM routers. These performance parameters strongly depend on the parameters of the CLS token bucket shaper, that is, the token bucket depth and token bucket input buffer capacity. A nrt-VBR connection is able to offer a given performance level over a range of values of the token bucket parameters wider than that permitted by a CBR connection. Moreover, in all the examined cases the nrt-VBR connection needs a relatively small ATM buffer at the IP/ATM routers. Since, in order to guarantee acceptable performance, some CLS requests must be rejected, the utilization of the ATM link can be relatively low; this drawback can be overcome by serving the rejected CLS requests as classic best-effort traffic     

ATM in MPLS-based converged core data networks

Services supported by asynchronous transfer mode account for the majority of data and Internet service revenues generated by carrier networks today. This is based on ATM's ability to support high availability services with quality of service. However, the influences of the Internet and a highly dynamic telecommunications market have raised demands for increased flexibility while controlling costs. Therefore, future carrier networks are likely to continue to be based on established technologies, such as ATM, as well as IP. In many cases, this is achieved through maintaining separate ATM and IP core networks, with the IP network supporting Internet services, while the ATM network continues to support guaranteed services such as private lines, broadband access, and video. In some cases, however, it can be advantageous for a carrier to transport segments of their ATM network over their IP network core; for example, to transport ATM traffic currently carried on leased facilities onto an IP network where the service provider owns the facilities. Developments in IP and MPLS-based traffic engineering and QoS may increase the ability of IP-based networks to support ATM services using MPLS. This article provides an overview of approaches enabling a network based on MPLS that naturally supports IP services to also support ATM services. The drivers and requirements for convergence on an IP/MPLS core network are presented, followed by an overview of the different approaches and associated challenges currently being debated in the standards bodies.     

Multiple access control protocols for wireless ATM: problemsdefinition and design objectives

The concept of wireless ATM is now being actively considered as a potential framework for next-generation wireless communication networks capable of supporting integrated multimedia services with different QoS requirements. Several key subsystem design issues for wired ATM and wireless networks need to be readdressed in the scope of the wireless ATM. One of the main key subsystem issues is the development of the appropriate medium access control (MAC) protocol, which has the capability to extend the statistical multiplexing of the wired ATM network into the wireless medium. In this article the authors address the problem of a suitable MAC protocol for the specification of a wireless ATM network and outline the design objectives. In addition, the authors address some other challenging key issues that the wireless medium and wireless network architecture impose on the ATM stack protocol     

Dynamic bandwidth allocation for interactive applications

The transmission of stored video across an ATM network is considered for interactive applications with bounded reaction times. The performance of the services renegotiated VBR (RVBR) and renegotiated CBR (RCBR) is investigated for this class of applications by trace-driven simulations. The goal is to determine the most efficient service for interactive applications. Here we present three basic results. First, for delay sensitive applications smoothing the video stream in advance is much more efficient than adding smoothing buffers to the network switches. Second, services with renegotiation (RCBR, RVBR) are better suited for interactive applications than the static services CBR and VBR. Third, the RVBR service with a deterministic call admission control scheme is the best choice for interactive applications that require small reaction times.     

Quality of service in telecommunications .II. Translation of QoSparameters into ATM performance parameters in B-ISDN

The main goal of this article is to present the translation of quality of service (QoS) parameters between layers. The QoS parameters in the ATM layer and AAL are defined. This translation concept came from the QoS framework in which the influence of the protocol stack on the QoS should be considered. As an example, we concentrate on the translation from the AAL to the ATM layer, as the AAL must be designed to be service-dependent and specific. Translation, both taking the transport protocol into account as well as between application and transport QoS, needs further study. However, our study shows that the QoS translation is a possible and good approach in end-to-end QoS guarantees in the broadband integrated services digital network (B-ISDN). As far as the end-to-end QoS guarantee issue is concerned, the transport QoS requirements are specified in terms of bounds on transport QoS parameters. The bounds on transport QoS parameters will be translated into the bounds on ATM layer QoS parameters. The ATM-layer QoS parameters resulting from the translation will be the performance requirements on a connection basis for the ATM network, but are basically the end-to-end parameters, including the network and the end systems. Therefore, the QoS translation finally results in the network performance parameters in the ATM network. We define QoS parameters in the AAL and ATM layer. Case studies in which the translation method is applied to a constant bit rate (CBR) video service and data service, respectively, are also presented     

Video aggregation: adapting video traffic for transport overbroadband networks by integrating data compression and statisticalmultiplexing

Future broadband integrated services networks based on the asynchronous transfer mode (ATM) technology are expected to carry information from a large variety of different services and applications. This paper investigates video aggregation, a concept that integrates compression and statistical multiplexing of video information for transport over a communication network. We focus on the transmission of a group of video sessions as a bundle, the practical examples of which include entertainment-video broadcast and video-on-demand (VoD). In this situation, the advantage of constant bit-rate (CBR) transport (which facilitates simple network management and operation) and the advantage of variable bit-rate (VBR) video compression (which yields smoother image quality) can be achieved simultaneously. We show that it is better to integrate compression and statistical multiplexing before the bundle of video traffic enters the network than performing them as independent processes. We present experimental results which indicate the advantages of video aggregation in terms of superior image quality and efficient bandwidth usage     

MPEG—2在ATM网络的传输

随着ATM技术和编码技术的成熟,ATM上可以传送增强型媒体,这使得视听业务的广泛应用成为可能,主要讨论在ATM网络上恒定比特率（CBR）或可变比特率（VBR）的MPEG-2的传输,这涉及到适配层的选择,MPEG-2帧的封装,ATM业务类型的选择等问题。     

Modelling and analysis of routing and resource allocation techniques in multi‐service networks

In this paper a novel call level model based on the extension of the classical Erlang multi‐rate model for broadband integrated services networks is proposed. We use the model to study routing strategies in multi‐service networks where service classes with/without QoS guarantees coexist. Examples for such networks include ATM and IP‐based integrated networks. In ATM, the CBR and VBR service classes provide QoS guarantees, while the ABR and UBR service classes are of the best effort type. In IP, traditional TCP/IP traffic is of the best effort type, while new protocols like the RSVP or the differentiated services with central resource handling attempt to support QoS parameters. The coexistence of guaranteed and best effort traffic gives rise to new challenging problems since for a given elastic (best effort) connection the bottleneck link determines the available bandwidth and thereby puts constraints on the bandwidth at the other links along the connection's path. Since the available bandwidth fluctuates in time following the load on the links, routing and link allocation in this environment together with blocking probability calculations and fairness issues need to be studied. By means of our proposed model we are able to conduct a survey of various routing and link allocation techniques as well as to develop a modified shortest path routing algorithm which, according to the numerical examples, performs well in this environment. Copyright © 1999 John Wiley & Sons, Ltd.     

Jitter accumulation for 2 Mbit/s CBR services transported on cascaded ATM islands adopting SRTS technique

The performance of the SRTS technique adopted for coding timing information of CBR services transported on ATM networks are evaluated using a computer simulation approach. In particular, the analysis of jitter accumulation phenomena on cascaded ATM islands is carried out and indications on desynchronizer bandwidth choice are provided. Copyright © 2000 John Wiley & Sons, Ltd.     

Model and performance evaluation for multiservice network linksupporting ABR and CBR services

We consider a “dynamic” model for a link jointly supporting two types of service: rate-adaptive and constant-bit rate services, e.g., ABR and CBR service in ATM networks. We construct and solve the associated two dimensional Markov chain via matrix-geometric techniques. This permits an analytical evaluation of performance when such services share resources. Moreover, when constant-bit rate connections are long lived relative to rate-adaptive connections (e.g., file transfers), we prove a separation of time scale result. This leads to a useful approximation that closely matches the performance in this regime     

Survey of switching techniques in high-speed networks and their performance

One of the most promising approaches for high speed networks for integrated service applications is fast packet switching, or ATM (asynchronous transfer mode). ATM can be characterized by very high speed transmission links and simple, hard-wired protocols within a network. To match the transmission speed of the network links, and to minimize the overhead due to the processing of network protocols, the switching of cells is done in hardware switching fabrics in ATM networks. A number of designs have been proposed for implementing ATM switches. Although many differences exist among the proposals, the vast majority of them are based on self-routeing multistage interconnection networks. This is because of the desirable features of multi-stage interconnection networks such as self-routeing capability and suitability for VLSI implementation. Existing ATM switch architectures can be classified into two major classes: blocking switches, where blockings of cells may occur within a switch when more than one cell contends for the same internal link, and non-blocking switches, where no internal blocking occurs. A large number of techniques have also been proposed to improve the performance of blocking and non-blocking switches. In this paper, we present an extensive survey of the existing proposals for ATM switch architectures, focusing on their performance issues.     

基于ATM的无源光网络媒质接入控制协议的设计

针对基于ＡＴＭ的无源光网络（ＡＴＭ－ＰＯＮ）设计了一种媒质接入控制（ＭＡＣ）协议。该协议的设计遵照ＩＴＵ－Ｔ有关ＡＴＭ－ＰＯＮ的建议Ｇ．９８３．１（１９９８年１０月）中所定义的帧结构。该协议能够支持ＣＢＲ／ＶＢＲ、ＡＢＲ和ＵＢＲ等多种业务,并能够保证用户公平地接入和充分地利用网络的资源。其中ＣＢＲ／ＶＢＲ业务的优先级最高,同时也确保ＡＢＲ业务至少能以最小信元通信。系统的剩余带宽资源被分配给ＵＢＲ业