ABA triblock copolymers with two crystallizable blocks

Triblock copolymers of the ABA type were synthesized in which the A block is poly(ethylene oxide) (PEO), having molecular weight of 1000 or 2000, and the B block is poly(dimethylsiloxane) (PDMS), having molecular weight of about 8000 or 10,000. When the triblock copolymer was cooled from the melt, the PEO block crystallized at around room temperature. Upon further cooling to liquid nitrogen temperature and reheating, the crystallization of the PDMS middle block took place at around ?90°C. The melting temperatures and degrees of crystallinity of the PEO blocks in the copolymers were depressed from their respective pure state values. On the other hand, the melting points of the PDMS middle blocks in the copolymers were the same as the pure state values; furthermore, the degrees of crystallinity were unexpectedly much higher. © 1993 John Wiley & Sons, Inc.     

Nonaqueous emulsion copolymerization of ethyl methacrylate/lauryl methacrylate in propylene glycol. I. Evaluation of stabilizing efficiency for PEO‐PS‐PEO triblock copolymers

Sixteen poly(ethylene oxide)–polystyrene–poly(ethylene oxide) (PEO‐PS‐PEO) triblock copolymers were synthesized by anionic polymerization. They were characterized by gel permeation chromatography and proton NMR. The molecular weight of these 16 PEO‐PS‐PEO triblock copolymers ranged from 5100 to 13,300. The polystyrene (PS) block length was between 13 and 41. The PEO block length was between 41 and 106. The polydispersity index for these PEO‐PS‐PEO triblock copolymers were 1.05 ± 0.02. When using these stabilizers in the emulsion copolymerization of ethyl methacrylate and lauryl methacylate in propylene glycol, only a narrow window of stability was observed. Stable latexes were formed only when the molecular weights of the PEO blocks were within the range of 5300–7700 and the molecular weights of the PS blocks were 2000–4000. The stabilizer ability for these triblock copolymers was correlated with their molecular weight and conformation in propylene glycol. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 80: 1951–1962, 2001     

Preparation and characterization of polystyrene–poly(ethylene oxide) amphiphilic block copolymers via atom transfer radical polymerization: Potential application as paper coating materials

Poly(ethylene oxide) (PEO) monochloro macroinitiators or PEO telechelic macroinitiators (Cl‐PEO‐Cl) were prepared from monohydroxyfunctional or dihydroxyfunctional PEO and 2‐chloro propionyl chloride. These macroinitiators were applied to the atom transfer radical polymerization of styrene (S). The polymerization was carried out in bulk at 140°C and catalyzed by Copper(I) chloride (CuCl) in the presence of 2,2′‐bipyridine (bipy) ligand (CuCl/bipy). The amphiphilic copolymers were either A‐B diblock or A‐B‐A triblock type, where A block is polystyrene (PS) and B block is PEO. The living nature of the polymerizations leads to block copolymers with narrow molecular weight distribution (1.072 < M_w/M_n < 1.392) for most of the macroinitiators synthesized. The macroinitiator itself and the corresponding block copolymers were characterized by FTIR, ¹H NMR, and SEC analysis. By adjusting the content of the PEO blocks it was possible to prepare water‐soluble/dispersible block copolymers. The obtained block copolymers were used to control paper surface characteristics by surface treatment with small amount of chemicals. The printability of the treated paper was evaluated with polarity factors, liquid absorption measurements, and felt pen tests. The adsorption of such copolymers at the solid/liquid interface is relevant to the wetting and spreading of liquids on hydrophobic/hydrophilic surfaces. From our study, it is observed that the chain length of the hydrophilic block and the amount of hydrophobic block play an important role in modification of the paper surface. Among all of block copolymers synthesized, the PS‐b‐PEO‐b‐PS containing 10 wt % PS was found to retard water absorption considerably. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 4304–4313, 2006     

Synthesis and characterization of perfectly alternating polycarbonate‐polydimethylsiloxane multiblock copolymers possessing controlled block lengths

An array of perfectly alternating polycarbonate‐polydimethylsiloxane (PC‐PDMS) multiblock copolymers possessing systematic variations in block molecular weights were successfully produced by coupling preformed PC and PDMS telechelic oligomers using hydrosilylation. Based on gel permeation chromatography results, the multiblock copolymers were essentially void of the oligomeric precursors. Despite the relatively large difference in solubility parameter between PC and PDMS, the multiblock copolymers exhibited significant partial miscibility between the two phases. As expected, the degree of partial miscibility was dependent on the molecular weight of the blocks with the extent of partial miscibility increasing with decreasing block molecular weights. Morphological characterization using small angle X‐ray scattering showed that, at a given PC block molecular weight, the uniformity of the two phase morphology increased with increasing PDMS block molecular weight, which is consistent with a decrease in the extent of phase mixing with increasing PDMS block molecular weight. POLYM. ENG. SCI., 54:1648–1663, 2014. © 2013 Society of Plastics Engineers     

Synthesis and characterization of novel block copolymer from trans‐4‐hydroxy‐L‐proline and poly(ethylene glycol)

A series of novel ABA‐type block copolymers were synthesized by polymerization of trans‐4‐hydroxy‐L ‐proline (HyP) in the presence of various molecular weight poly(ethylene glycol)s (PEGs), a bifunctional OH‐terminated PEG using stannous octoate as catalyst. The optimal reaction conditions for the synthesis of the copolymers were obtained with 5 wt % stannous octoate at 140°C under vacuum (20 mmHg) for 24 h. The synthesized copolymers were characterized by IR spectroohotometry, proton nuclear magnetic resonance, differential scanning calorimetry, and Ubbelohde viscometer. The glass transition temperature (T_g) of the copolymers shifted to significantly higher temperature with increasing the number average degree of polymerization and HyP/PEO molar ratio. In contrast, the melting temperature (T_m) decreased with increasing the HyP/PEO molar ratio. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 1581–1587, 2001     

Solvent induced morphologies of poly(methyl methacrylate-b-ethylene oxide-b-methyl methacrylate) triblock copolymers synthesized by atom transfer radical polymerization

Poly(methyl methacrylate-b-ethylene oxide-b-methyl methacrylate) (PMMA-PEO-PMMA) triblock copolymers were synthesized using atom transfer radical polymerization (ATRP) and halogen exchange ATRP. PEO-based macroinitiators with molecular weight from M_n = 2000 to 35,800 g/mol were used to initiate the polymerization of MMA to obtain copolymers with molecular weight up to M_n = 82,000 g/mol and polydispersity index (PDI) less than 1.2. The macroinitiators and copolymers were characterized by gel permeation chromatography (GPC) and nuclear magnetic resonance (NMR) spectroscopy. The melting temperature and glass transition temperature of the copolymers were measured by differential scanning calorimetry (DSC). Crystallinities of the PEO blocks were determined from the WAXS patterns of both homopolymers and block copolymers, which revealed the fragmentation of PEO blocks due to the folding of the PMMA chains. Interestingly, the fragmentation was less pronounced when cast on surfaces compared to that in bulk, as measured by GISAXS. Solvent casting was used to control the morphology of the copolymers, permitting the formation of various states including amorphous, induced micellar with a PMMA core and flower-like PEO arms, and a cross-linked gel. Atomic force microscopy (AFM) was used to visualize the different copolymer morphologies, showing micellar and amorphous states.     

Mechanical properties–morphology relationships in nano‐/microstructured epoxy matrices modified with PEO–PPO–PEO block copolymers

Epoxy‐based blends containing poly(ethylene oxide)‐co‐poly(propylene oxide)‐co‐poly(ethylene oxide) (PEO–PPO–PEO) block copolymers with different PEO/PPO molar ratios have been investigated in order to analyze the effect of the generated morphologies and interactions between components on the mechanical properties of the blends. Mechanical, morphological and dynamic mechanical analyses indicate that the observed increase of flexural modulus can be related to the decrease of free volume. In modified systems that remain miscible, an increase of flexural modulus, strength and fracture toughness can be observed. Also, macrophase‐ and microphase‐separated systems show an increase of fracture toughness but not of flexural modulus and strength at low contents of block copolymers. Copyright © 2007 Society of Chemical Industry     

Microscopic surface and bulk morphology of semicrystalline poly(dimethylsiloxane)–polyester copolymers

In this study, two series of semicrystalline poly(dimethylsiloxane) (PDMS)–polyester segmented copolymers with various PDMS contents were synthesized. One series was based on polybutylene adipate (PBA) as the polyester segment and the other was based on a polybutylene cyclohexanedicarboxylate ester (PBCH) segment. The copolymers were characterized using ¹H‐nuclear magnetic resonance, size exclusion chromatography, dynamic mechanical analyses, differential scanning calorimetry (DSC), and wide‐angle X‐ray diffraction (WAXD). The microscopic surface morphology and the microscopic bulk morphology were investigated using atomic force microscopy (AFM) and transmission electron microscopy, respectively. The effects of the polyester type and the PDMS content on the crystallinity degree as well as the copolymer surface and bulk morphology at room temperature were investigated for each series. DSC and WAXD results showed the ability of the copolymers to crystallize, to various degrees, depending on the polyester type and the PDMS content. The results showed that the PDMS content had a greater influence on the crystallinity degree in the PDMS‐s‐PBCH (cycloaliphatic) copolymer series than in the PDMS‐s‐PBA (aliphatic) copolymer series. In the copolymers with a low PDMS content, the AFM images showed spherulitic crystal morphology and evidence of PDMS nanodomains in between the crystal lamellae of the ester phase on the copolymer surface. A heterogeneous distribution of the PDMS domains was also observed for these copolymers in the bulk morphology as a result of this segregation between the polyester lamellae. All the copolymers, in both series, showed microphase separation as a result of the incompatibility between the PDMS segment and the polyester segment. Three types of surfaces and bulk morphologies were observed: spherical microdomains of PDMS in a matrix of polyester, bicontinuous double‐diamond type morphology, and spherical microdomains of polyester in a matrix of PDMS as the PDMS content increases. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Synthesis and properties of amphiphilic copolymers of butyl acrylate and methyl methacrylate with uniform polyoxyethylene grafts

Amphiphilic copolymers of butyl acrylate (BA) and methyl methacrylate (MMA) with uniform polyoxyethylene (PEO) grafts were synthesized by the copolymerization of BA and MMA with a methacrylate‐terminated PEO macromer in benzene with azobisisobutyronitrile as an initiator. The effects of various copolymerization conditions on the grafting efficiency and molecular weight of the copolymers, as well as the effect of the copolymerization time on the conversions of the macromer and the monomers, were reported. The copolymers, with uniform PEO grafts, were purified by successive extractions with water and ether/acetone (3/7) to remove unreacted macromer and ungrafted copolymers of MMA and BA, respectively. The purified graft copolymers were characterized with IR, ¹H‐NMR, membrane osmometry, gel permeation chromatography, and differential scanning calorimetry. The highest grafting efficiency was about 90%, and molecular weight of the copolymers varied around 10⁵. The average grafting number of the copolymer was about 10. A study of the crystalline properties, emulsifying properties, phase‐transfer catalytic ability, and mechanical properties of the graft copolymers showed that the emulsifying volume decreased with the increasing molecular weight of the PEO grafts but increased with the PEO content. The conversion of potassium phenolate in the Williamson solid–liquid reaction obviously increased with an increasing PEO content of the graft copolymers. The crystallinity of the graft copolymers increased with the PEO content of the graft copolymers or the molecular weight of the macromer used. The copolymers, prepared under certain conditions, behaved as thermoplastic elastomers. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 2982–2988, 2003     

Synthesis and characterization of advance PA6‐b‐PDMS multiblock copolymers

Advance polyamide‐6‐b‐polydimethylsiloxane (PA6‐b‐PDMS) multiblock copolymers were first synthesized via the polymerization in bulk. Binary carboxyl terminated PA6 was served as the hard segment and PDMS modified with hexamethylene diisocyanate (PDMS‐NCO) was the soft segment. A series of PA6‐b‐PDMS copolymers based on different content and length of soft segments were obtained. Interestingly, Differential scanning calorimetry (DSC) studies revealed no obvious change in melting temperature after introducing PDMS segments to copolymers. The high melting temperatures indicated these copolymers possess potential applications in automotive industry that require high continuous use temperatures. DSC and transmission electron microscopy studies both demonstrated increasing the length and the content of the soft segment contributed to increasing of the degree of microphase separation. However, the improvement of thermal stability resulting from PDMS segments was also observed by thermo gravimetric analysis. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 41114.     

Synthesis and characterization of hexafluoroisopropylidene bisphenol poly(arylene ether sulfone) and polydimethylsiloxane segmented block copolymers

A series of hexafluoroisopropylidene bisphenol poly(arylene ether sulfone) (BAF PAES) segmented block copolymers with varying fractions of polydimethylsiloxane (PDMS) were synthesized by a condensation reaction of hydroxyl-terminated BAF PAES and dimethylamino endcapped PDMS. The segmented block copolymers have high thermal stability. The BAF PAES homopolymer exhibits a tensile modulus of 1700 MPa and an elongation at break of 16%. Copolymerizing BAF PAES with increasing molecular weight amounts of PDMS results in tensile properties ranging from plastic to elastomeric where the elongation is 417% for a segmented block copolymer with 64 wt% PDMS incorporated. The morphological properties of these segmented block copolymers were characterized by atomic force microscopy (AFM), small-angle X-ray scattering (SAXS), and transmission electron microscopy (TEM). AFM and TEM images show the segmented block copolymers were microphase separated, and comparison with bisphenol A (BA) PAES-b-PDMS segmented block copolymers revealed complex differences between the morphological behavior of the two systems. SAXS data of the segmented block copolymers supports AFM and TEM images, indicating microphase separation but little long-range order.     

Synthesis and characterization of amphiphilic block copolymers of methyl methacrylate with poly(ethylene oxide) macroinitiators formed by atom transfer radical polymerization

Amphiphilic ABA triblock copolymers of poly(ethylene oxide) (PEO) with methyl methacrylate (MMA) were prepared by atom transfer radical polymerization in bulk and in various solvents with a difunctional PEO macroinitiator and a Cu(I)X/N,N,N′,N″,N″‐pentamethyldiethylenetriamine catalyst system at 85°C where X=Cl or Br. The polymerization proceeded via controlled/living process, and the molecular weights of the obtained block copolymers increased linearly with monomer conversion. In the process, the polydispersity decreased and finally reached a value of less than 1.3. The polymerization followed first‐order kinetics with respect to monomer concentration, and increases in the ethylene oxide repeating units or chain length in the macroinitiator decreased the rate of polymerization. The rate of polymerization of MMA with the PEO chloro macroinitiator and CuCl proceeded at approximately half the rate of bromo analogs. A faster rate of polymerization and controlled molecular weights with lower polydispersities were observed in bulk polymerization compared with polar and nonpolar solvent systems. In the bulk polymerization, the number‐average molecular weight by gel permeation chromatography (M_n,GPC) values were very close to the theoretical line, whereas lower than the theoretical line were observed in solution polymerizations. The macroinitiator and their block copolymers were characterized by Fourier transform infrared spectroscopy, ¹H‐NMR, matrix‐assisted laser desorption ionization time‐of‐flight mass spectrometry, thermogravimetry (TG)/differential thermal analysis (DTA), differential scanning calorimetry (DSC), and scanning electron microscopy (SEM). TG/DTA studies of the homo and block copolymers showed two‐step and multistep decomposition patterns. The DSC thermograms exhibited two glass‐transition temperatures at ?17.7 and 92°C for the PEO and poly(methyl methacrylate) (PMMA) blocks, respectively, which indicated that microphase separation between the PEO and PMMA domains. SEM studies indicated a fine dispersion of PEO in the PMMA matrix. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 989–1000, 2005     

Surface chemical analysis of poly(ε‐caprolactone)–perfluoropolyether–poly(ε‐caprolactone) triblock copolymers by X‐ray photoelectron spectroscopy

The air‐side surface composition of a series of poly(ε‐caprolactone)–perfluoropolyether–poly(ε‐caprolactone) triblock copolymers with different compositions and block lengths have been studied by angle‐dependent X‐ray photoelectron spectroscopy (XPS). The weight percentage of the perfluoropolyether (PFPE) and polycaprolactone (PCL) blocks, and ethylene oxide linker (R_H) has been calculated in different ways: from C1s, O1s and F1s photoemission peaks and by line fitting of the C1s and O1s envelopes. The atomic sensitivity factors and the parameters used to fit the peak envelopes have been experimentally determined using some reference materials. A critical discussion of the different methods used in the surface characterization and the degradation of PFPE segments, induced by irradiation beam, have been also reported. A large excess of PFPE with respect to the bulk composition was observed in all samples, and the angular dependence of the XPS signal demonstrated that the content of the fluorinated block segment increased by decreasing the sampling depth. The PFPE surface concentration was also decreased by increasing the PCL/PFPE ratio, but the surfaces of the samples were still dominated by PFPE segments for copolymers with a bulk PFPE composition lower than 10%. Moreover, copolymers with similar PCL/PFPE bulk ratios but with different PFPE block lengths, showed similar PFPE surface composition when the number‐average molecular weight (M_n) was 2000 and 3200 g mol^?1, while that observed for copolymers containing PFPE block with M_n 900 g mol^?1 was lower. Copyright © 2003 Society of Chemical Industry     

Hyperbranched–linear–hyperbranched ABA‐type block copolymers based on poly(ethylene oxide) and polyglycerol

BACKGROUND: Until recently, hyperbranched polymers were thought to be ill‐defined materials that were not useful as building blocks for well‐defined complex polymer architectures. It is a current challenge to develop strategies that offer rapid access to well‐defined hyperbranched block copolymers. RESULTS: A convenient three‐step protocol for the synthesis of double‐hydrophilic hyperbranched–linear–hyperbranched ABA‐type triblock copolymers based on poly(ethylene oxide) (PEO) and hyperbranched polyglycerol (hbPG) is presented. The Bola‐type polymers exhibiting an aliphatic polyether structure were prepared from a linear (lin) linPG‐b‐PEO‐b‐linPG precursor triblock. The materials exhibit low polydispersities (M_w/M_n) in the range 1.19–1.45. The molecular weights of the block copolymers range from 6300 to 26 200 g mol^?1, varying in the length of both the linear PEO chain as well as the hbPG segments. Detailed characterization of the thermal properties using differential scanning calorimetry demonstrates nanophase segregation of the blocks. CONCLUSION: The first example of well‐defined ABA hyperbranched–linear–hyperbranched triblock copolymers with PEO middle block and hbPG A‐blocks is presented. The biocompatible nature of the aliphatic polyether blocks renders these materials interesting for biomedical purposes. These new materials are also intriguing with respect to their supramolecular order and biomineralization properties. Copyright © 2009 Society of Chemical Industry     

Synthesis and characterization of Pst‐b‐PDMS‐b‐PSt copolymers by atom transfer radical polymerization

Polystyrene‐b‐poly(dimethylsiloxane)‐b‐polystyrene (Pst‐b‐PDMS‐b‐PSt) triblock copolymers were synthesized by atom transfer radical polymerization (ATRP). Commercially available difunctional PDMS containing vinylsilyl terminal species was reacted with hydrogen bromide, resulting in the PDMS macroinitiators for the ATRP of styrene (St). The latter procedure was carried out at 130°C in a phenyl ether solution with CuCl and 4, 4′‐di (5‐nonyl)‐2,2′‐bipyridine (dNbpy) as the catalyzing system. By using this technique, triblock copolymers consisting of a PDMS center block and polystyrene terminal blocks were synthesized. The polymerization was controllable; ATRP of St from those macroinitiators showed linear increases in M_n with conversion. The block copolymers were characterized with IR and ¹H‐NMR. The effects of molecular weight of macroinitiators, macroinitiator concentration, catalyst concentration, and temperature on the polymerization were also investigated. Thermodynamic data and activation parameters for the ATRP are reported. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 3764–3770, 2004     

Effect of filler content on the structure‐property behavior of poly(ethylene oxide) based polyurethaneurea‐silica nanocomposites

Poly(ethylene oxide) (PEO) based polyurethaneurea‐silica nanocomposites were prepared by solution blending and characterized by Fourier Transform Infrared Spectroscopy, Scanning Electron Microscopy, Differential Scanning Calorimetry and tensile testing. The colloidal silica nanoparticles with an average size of 50 nm were synthesized by modified Stöber method in isopropanol. Silica particles were incorporated into three cycloaliphatic polyurethaneurea (PUs) copolymers based on PEO oligomers with molecular weights of 2,000, 4,600, and 8,000 g/mol. Hard segment content of PUs was constant at 30% by weight. Silica content of the PU nanocomposites varied between 1 and 20% by weight. Soft segment (SS) glass transition and melting temperatures slightly increased with increasing filler content for all the copolymers. Degree of SS crystallinity first increased with 1% silica incorporation and subsequently decreased by further silica addition. Elastic modulus and tensile strengths of PU copolymers gradually increased with increasing amount of the silica filler. Elongation at break values gradually decreased in PEO‐2000 based PU copolymer with increasing silica content, whereas no significant change was observed in PUs based on PEO‐4600 and PEO‐8000. Enhancement in tensile properties of the materials was mainly attributed to the homogeneous distribution of silica filler in polymer matrices and strong polymer‐filler interactions. POLYM. ENG. SCI., 58:1097–1107, 2018. © 2017 Society of Plastics Engineers     

Synthesis of multiblock copolymers of poly(2‐vinylpyridine) and polyoxyethylene

Telechelic dihydroxy poly(2‐vinylpyridine) (THPVP) samples with different molecular weights were synthesized by using lithium α‐methylnaphthalene as an anionic initiator in mixed solvents of benzene and tetrahydrofuran (THF). Then multiblock copolymers of poly(2‐vinylpyridine) (P2VP) and polyoxyethylene (PEO) were obtained by condensing THPVP and PEO with dichloromethane in the presence of potassium hydroxide. The effects of reaction time, molecular weight of PEO and THPVP, and raw meal ratio PEO/THPVP (w/w) were investigated. The best conditions were found. The copolymers can be purified by water and toluene. The purified copolymers were characterized by infrared (IR) and ¹H nuclear magnetic resonance (¹H‐NMR). The PEO segment content was calculated from the integral curve of ¹H‐NMR spectra. The results showed that these multiblock copolymers were connected through oxymethylene. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 1632–1636, 2003     

Thermal,thermomechanical, and electrochemical characterization of the organic–inorganic hybrids poly(ethylene oxide) (PEO)–silica and PEO–silica–LiClO4

To study the effect of the silica content on the properties of the salt‐free and salt‐added hybrids based on poly(ethylene oxide) (PEO) and silica, two series of hybrids, PEO–silica and PEO–silica–LiClO₄ (O:Li, 9:1) hybrids were prepared via the in situ acid‐catalyzed sol–gel reactions of the precursors [i.e., PEO functionalized with triethoxysilane and tetraethyl orthosilicate (TEOS)]. The morphology of the hybrids was examined by scanning electron microscopy (SEM) of the fracture surfaces of the hybrid. The results indicated that the discontinuity develops with increasing the weight percent of silica in both hybrids. The differential scanning calorimetric (DSC) analysis indicated that effects of silica content on the glass transition temperatures (T_g) of the PEO phase were different in salt‐free and salt‐added hybrids. The T_g of PEO phase increased with increasing weight percent of silica in salt‐free hybrids, whereas the curve of T_g of PEO phase and silica content had a maximum at 35 wt % of silica content in salt‐added hybrids. For both salt‐free and salt‐added hybrids, peaks of the loss tangent, determined by dynamic mechanical analysis (DMA) were gradually broadened and lowered with increasing weight percent of silica. The storage modulus, E′, in the region above T_g increases with increasing silica content for both PEO–silica and PEO–silica–LiClO₄ hybrids. In the conductivity and composition curves for PEO–silica–LiClO₄ hybrids, the conductivity shows a maximum value of 3.7 × 10^?6 S/cm, corresponding to the sample with a 35 wt % of silica. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 2471–2479, 2001     

Comparison between the self‐assembling behaviors of PLLA‐PEO‐PLLA triblock copolymers and PLLA‐PEO‐PPO‐PEO‐PLLA pentablock copolymers

Poly(L ‐lactic acids) (PLLAs) were grafted to both ends of poly(ethylene oxide) (PEO) to produce biocompatible amphiphilic PLLA‐PEO‐PLLA triblock copolymers. The self‐assembling behaviors of two PLLA‐PEO‐PLLA copolymers in aqueous solutions were examined by Dynamic Light Scattering and Transmission Electron Microscopic techniques. PLLA‐PEO‐PLLA formed spherical micelles, whereas PLLA‐PEO‐PPO‐PEO‐PLLA pentablock copolymers were reported to produce vesicles. It is believed that the PPO segment within the PLLA‐PEO‐PPO‐PEO‐PLLA pentablock copolymers has a dominant role in the formation of vesicles. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Synthesis of graft copolymer polyethylene‐ graft‐poly(ethylene oxide) by a new anionic graft‐from polymerization

A series of amphiphilic graft copolymers, PE‐graft‐PEO, containing hydrophobic polyethylene (PE) as the backbone and hydrophilic poly(ethylene oxide) (PEO) as the side‐chain, have been synthesized by a novel route. The graft structure and the molecular weight, as well as the molecular weight distribution of the graft copolymer can easily be controlled. The molecular weight of the side‐chain PEO is proportional to the reaction time and the monomer concentration, which indicates the ‘living’ character of the anionic polymerization of ethylene oxide. The produced copolymers PE‐graft‐PEO were characterized by ¹H NMR and DSC measurements. Copyright © 2004 Society of Chemical Industry