Removal of 1,1′-Dimethyl-4,4′bipyridyl Dichloride from Aqueous Solution by Natural and Activated Bentonite

The sorption of 1,1′-dimethyl-4,4′bipyridilium dichloride (paraquat) on bentonite desiccated at 110°C untreated, and acid-treated with H₂SO₄ solutions over a concentration range between 0·25 M and 1·00 M , from aqueous solution at 30°C has been studied by using batch experiments. In addition, column experiments were carried out with the bentonite sample treated with the 1·00 M H₂SO₄ solution [B-A(1·00)] by using two aqueous solutions of paraquat of different concentrations (C = 29·40 mg dm⁻³ and C = 65·38 mg dm⁻³). The experimental data points have been fitted to the Langmuir equation in order to calculate the sorption capacities (X_m) of the samples; X_m values range from 1·35×10⁵ mg kg⁻¹ for the sample acid-treated with 0·375 M H₂SO₄ [B-A(0·375)] up to 1·96×10⁵ mg kg⁻¹ for the untreated bentonite [B-N]. The removal efficiency (R) has also been calculated; R values ranging from 44·61% for the [B-A(0·375)] sample up to 67·23% for B-N. The batch experiments show that the natural bentonite is more effective than the acid-treated bentonite in relation to sorption of paraquat. The column experiments show that the B-A(1·00) sample might be reasonably used in removing paraquat, the column efficiency increasing from 37·55% for the C = 65·38 mg dm⁻³ aqueous solution of paraquat up to 66·58% for the C = 29·40 mg dm⁻³ one. © 1997 SCI.     

Adsorption of chlorophyll-a from acetone solution on natural and activated bentonite

The adsorption of chlorophyll-a on bentonite desiccated at 110°C, untreated and acid-treated with H₂SO₄ solutions over a concentration range between 0·25 and 2·50 mol dm^?3, from acetone solution at 25°C has been studied. The adsorption isotherms may be classified as using Giles' classification, as type S (untreated sample and 0·25 mol dm^?3 H₂SO₄-treated sample), type H (0·50 mol dm^?3 H₂SO₄-treated sample) and type L (1·00 and 2·50 mol dm^?3 H₂SO₄-treated samples). This fact suggests that the bentonite surfaces (low, high and medium affinity, respectively) behave in differently relation to the adsorption of the chlorophyll-a molecules. The experimental data points have been fitted to the Freundlich equation in order to calculate the adsorption capacities (K_f) of the samples; K_f values range from 0·43 mg kg^?1 for the untreated bentonite up to 108·89 mg kg^?1 for the 0·50 M H₂SO₄-treated bentonite. The removal efficiencies (R) have also been calculated and range from 5·71% for the untreated bentonite up to 85·18% for the 0·50 M H₂SO₄-treated bentonite.     

Mathematical modelling of the alcoholic fermentation of glucose by Zymomonas mobilis mobilis

The kinetics of alcoholic fermentation of a strain of Zymomonas mobilis, isolated from sugarcane juice, has been studied with the objective of determining the constansts of a non-structured mathematical model that represents the fermentation process. Assays in batch and in continuous culture have been carried out with different initial concentrations of glucose. The final concentrations of glucose, ethanol and biomass were determined. The following kinetic parameters were obtained: μ_max, 0·5 h^?1; K_s, 4·64 g dm^?3; P_max, 106 g dm^?3; Y_x/s, 0·0265 g g^?1; m, 1·4 g g^?1 h^?1; α, 17·38 g g^?1; β, 0·69 g g^?1 h^?1.     

Continuous ethanol production from carob pod extract by immobilized Saccharomyces cerevisiae in a packed-bed reactor

The continuous production of ethanol from carob pod extract by immobilized Saccharomyces cerevisiae in a packed-bed reactor has been investigated. At a substrate concentration of 150 g dm^?3, maximum ethanol productivity of 16 g dm^?3 h^?1 was obtained at D = 0·4 h^?1 with 62·3% of theoretical yield and 83·6% sugars′ utilization. At a dilution rate of 0·1 h^?1, optimal ethanol productivity was achieved in the pH range 3·5–5·5, temperature range 30–35·C and initial sugar concentration of 200 g dm^?3. Maximum ethanol productivity of 24·5 g dm^?3 h^?1 was obtained at D = 0·5 h^?1 with 58·8% of theoretical yield and 85% sugars′ utilization when non-sterilized carob pod extract containing 200 g dm^?3 total sugars was used as feed material. The bioreactor system was operated at a constant dilution rate of 0·5 h^?1 for 30 days without loss of the original immobilized yeast activity. In this case, the average ethanol productivity, ethanol yield (% of theoretical) and sugars′ utilization were 25 g dm^?3 h^?1, 58·8% and 85·5%, respectively.     

Fourier-transform infrared assay of bile salt-stimulated lipase activity in reversed micelles

A Fourier-transform infrared (FT-IR) spectroscopic method has been developed for assaying the bile salt-stimulated human milk lipase (BSSL, EC3.1) catalyzed hydrolysis of triolein in AOT reversed micelles in iso-octane. At 37°C in 50 mmol dm^?3 AOT the molar absorbtivities for the carbonyl stretching frequencies for triolein (at 1751 cm^?1) and oleic acid (at 1714 cm^?1) were 1646 dm³ mol^?1 cm^?1 and 743 dm^?3 mol^?1 cm^?1, respectively. The rate was linearly dependent upon the concentration of enzyme in the water pool up to 10 mg cm^?3 and maximum activity was observed at a ratio (w₀) of [H₂O]:[AOT] = 16·7. Using these conditions, and in the presence of 10 mmol dm^?3 sodium taurocholate (TC), the derived Michaelis–Menten parameters V_max and K_m were 57·5 μmol min^?1 mg^?1 and 5·53 mmol dm^?3, respectively. These results are compared with those obtained in an oil-in-water microemulsion system and are discussed in terms of the relative partitioning of the enzyme and the substrate in the aqueous and oil phases and the interfacial concentration of the substrate in the two systems.     

Zinc uptake by Streptomyces rimosus biomass using a packed‐bed column

The ability of Streptomyces rimosus biomass to bind zinc ions in batch mode was shown recently. The aim of this study was to determine the zinc uptake capacity by Streptomyces rimosus biomass in continuous mode. Bacterial biomass was able to bind more Zn(II) after pretreatment with sodium hydroxide (1 mol dm⁻³) than without treatment. The maximum adsorption capacity and the adsorption capacity at the saturation point calculated by means of both the exchange zone model and the Thomas model were practically identical of about 2.9 mg_Zn(II) g⁻¹_biomass. This result was lower than the batch adsorption capacity of Streptomyces rimosus, indicating that the packed‐bed is not the most appropriate process to exploit the bacterial biomass adsorption capacity. The effect of zinc concentration in the range of 10 to 200 mg_Zn(II) dm⁻³ on the biosorption capacity of the packed‐bed was not significant. Biomass regeneration with 0.1 mol dm⁻³ HCl gave a 90% recovery of the adsorbed Zn(II). © 1999 Society of Chemical Industry     

Sago starch saccharification and simultaneous ethanol fermentation by amyloglucosidase and Zymomonas mobilis

Simultaneous saccharification and ethanol fermentation (SSF) of sago starch was studied using amyloglucosidase (AMG) and Zymomonas mobilis. The optimal concentration of AMG and operating temperature for the SSF process were found to be 0.5% (v/w) and 35°C, respectively. Under these conditions with 150 g dm^?3 sago starch as a substrate, the final ethanol concentration obtained was 69.2 g dm^?3 and ethanol yield, Y_P/S, 0.50 g g^?1 (97% of theoretical yield). Sago starch in the concentration range of 100–200 g dm^?3 was efficiently converted into ethanol. When compared to a two-step process involving separate saccharification and fermentation stages, the SSF reduced the total process time by half.     

Adsorption characteristics of carbonized bark for phenol and pentachlorophenol

The potential of using carbonized slash pine bark as a substitute for activated carbon was examined in this study. The bark was carbonized by slow heating in nitrogen for 6·5 h to 672°C. The BET-N₂ surface area, average micropore and mesopore diameter, and micropore volume were 332 m² g⁻¹ 21·7 Å, and 0·125 cm³ g⁻¹, respectively. The adsorption capacities for phenol and pentachlorophenol (PCP) at pH 2 and pH 8 were evaluated. The Langmuir equation provided a slightly better fit than the Freundlich equation to two sets of phenol data. The calculated Freundlich constants, K = 0·41–0·58 mmol/g/(mmol dm⁻³)^1/n and 1/n = 0·30–0·41, were lower and higher, respectively, than literature values for activated carbons. The adsorption capacity of the carbonized bark was much lower for PCP than for phenol. The protonated and anionic PCP isotherms were Type II or III, respectively, in the Brunauer classification. The BET equation provided the best fit to protonated PCP isotherm data. The anionic PCP data were fitted to both the BET model and an equation used in the literature to represent phosphate adsorption on activated carbons. Non-linear regression of the data for both phenol and PCP adsorption with the Freundlich, Langmuir and BET equations generally gave more accurate param-eters, compared with the use of linearized equations to obtain the parameters. © 1998 SCI.     

Adsorption of Microamounts of Silver on Manganese Dioxide from Acid Solutions

Abstract

Adsorption of microamounts of silver on manganese dioxide from nitric and perchloric acid solutions has been studied and optimized with respect to shaking time, concentrations of electrolyte, adsorbent, and adsorbate. Maximum adsorp- tion (>99.5%) has been achieved from 0.01 mol/dm³ acid solution using 50 mg oxide at 10^?5 mol/dm³ silver concentration after 30 min shaking. The adsorption decreases with increasing concentration of acid and adsorbate from both the acids. The presence of a 10⁴-fold greater concentration of cyanide, thiocyanate, thiosulfate, and Pb(II) than silver reduces the adsorption drastically. The adsorption of silver follows the Freundlich adsorption isotherm over the entire concentration range investigated from 9.27 × 10^?6 to 2.92 × 10^?3 mol/dm³ with a value of A = 49 mmol/g and 1/n = 0.93. Moreover, the Langmuir adsorption isotherm is also valid except at the lowest and highest concentrations. The values of the limiting adsorption concentrtion (C_m ) have been found to be 1 mmol/g and of the equilibrium constant for adsorption 87 dm³/mol at 23 ± 2°C.     

Utilization of response surface methodology to optimize the culture media for the production of rhamnolipids by Pseudomonas aeruginosa AT10

Pseudomonas aeruginosa AT10 produced a mixture of surface‐active rhamnolipids when cultivated on mineral medium with waste free fatty acids as carbon source. The development of the production process to an industrial scale included the design of the culture medium. A 2⁴ full factorial, central composite rotational design and response surface modelling method (RSM) was used to enhance rhamnolipid production by Pseudomonas aeruginosa AT10. The components that are critical for the process medium were the carbon source, the nitrogen source (NaNO₃), the phosphate content (K₂ HPO₄/KH₂PO₄ 2:1) and the iron content (FeSO₄·7H₂O). Two responses were measured, biomass and rhamnolipid production. The maximum biomass obtained was 12.06 g dm^?3 DCW, when the medium contained 50 g dm^?3 carbon source, 9 g dm^?3 NaNO₃, 7 g dm^?3 phosphate and 13.7 mg dm^?3 FeSO₄·7H₂O. The maximum concentration of rhamnolipid, 18.7 g dm^?3, was attained in medium that contained 50 g dm^?3 carbon source, 4.6 g dm^?3 NaNO₃, 1 g dm^?3 phosphate and 7.4 mg dm^?3 FeSO₄·7H₂O. © 2002 Society of Chemical Industry     

Synthesis of acrylamide/acrylic acid‐based aluminum flocculant for dye reduction and textile wastewater treatment

Aluminum hydroxide‐poly[acrylamide‐co‐(acrylic acid)], AHAMAA, was synthesized with a redox initiator by solution polymerization in which the effects of reactant contents were optimized. The effects of pH, temperature, and initial dye concentration on Congo red reduction were investigated. A mixture of Congo red and direct blue 71, and the composite textile dye wastewater were investigated. Adsorptions of both dyes were more effective in the nonbuffered solution than those in the buffered solution, and Congo red adsorbed more than direct blue 71 at all pHs. The adsorption of Congo red increased with increasing temperature and its initial concentration. Both dyes obeyed the Freundlich adsorption isotherm. The maximum adsorptions in 100 mg dm^?3 solution were 109 ± 0.5 mg g^?1 and 62 ± 6.6 mg g^?1 for Congo red and direct blue 71, respectively. At 150 mg dm^?3 of the mixed Congo red and direct blue 71, the adsorption was 142 ± 2 mg g^?1 by 643 ± 3 mg dm^?3 AHAMAA. The 40 mg g^?1 dyes of the textile effluent wastewater were adsorbed by 500 mg dm^?3 AHAMAA. AHAMAA could decrease turbidity of the composite wastewater containing a mixture of reactive and direct dyes from 405 to 23 NTU. POLYM. ENG. SCI., 50:1535–1546, 2010. © 2010 Society of Plastics Engineers     

Filtration of zinc ions utilising pretreated Streptomyces rimosus biomass

The performance of biofiltration of zinc utilising pretreated Streptomyces rimosus was studied. Streptomyces rimosus biomass is able to bind zinc ions in batch mode. The biomass granules may be regenerated easily by using a biomass pretreatment which confers rigidity to biosolids, without decreasing the zinc uptake capacity, thus allowing collection of the biomass by filtration. Accordingly, biomass was pretreated with an anionic enzymatic tension active product (Extran AP41) and regeneration with a cleaning product (HCl) was successfully realised. It was shown that the optimum concentration of biomass and pressure range are found to be between 50 and 120 g dm^?3 and 0.5 and 1 × 10⁵ Pa, respectively. Complete regeneration was reached after three cycles under optimal experimental conditions when the biosorbent was saturated with synthetic ZnCl₂ solution. The filterability of biosolids was demonstrated. A combination of a batch reactor and a filtration process made it possible to increase the performance of the complete treatment process. The biosorption capacity of the biomass to bind Zn ions was slightly increased (from X = 14 mg g^?1 in batch mode to X = 16.1 mg g^?1 in a process combining batch reactor and pressure filtration) and the experimental contact time was considerably reduced. Integration of the filtration process produced a dewatering cake which considerably facilitated the regeneration operation. Copyright © 2003 Society of Chemical Industry     

Kinetics of aspartame precursor synthesis catalysed by Pseudomonas aeruginosa elastase

Elastase isolated from Pseudomonas aeruginosa IFO 3455 was found to be an efficient protease to catalyse the synthesis of N-benzyloxycarbonyl-aspartyl-phenylalanine methyl ester, the precursor of the dipeptide sweetener, aspartame. The influence of methanol as a cosolvent in this synthetic reaction was investigated. It was found that the synthesis of the dipeptide precursor was most efficient in 25% (v/v) methanol, pH 7·0 at about 25°C for a reaction time of about 3 h. However, the activity of the enzyme was greatly reduced in 90% methanol. The values of K and k₂ for N-benzyloxycarbonyl-aspartic acid were 0·17 mol dm^?3 and 11·9 mol dm^?3 s^?1 respectively.     

Regeneration dynamics of potassium-based sediment sorbents for CO2 capture

Simulating regeneration tests of Potassium-Based sorbents that supported by Suzhou River Channel Sediment were carried out in order to obtain parameters of regeneration reaction. Potassium-based sediment sorbents have a better morphology with the surface area of 156.73 m²·g^?1, the pore volume of 357.5×10^?3 cm³·g^?1 and the distribution of pore diameters about 2–20 nm. As a comparison, those of hexagonal potassium-based sorbents are only 2.83 m²g^?1, 7.45×10^?3 cm³g^?1 and 1.72–5.4 nm, respectively. TGA analysis shows that the optimum final temperature of regeneration is 200 and the optimum loading is about 40%, with the best heating rate of 10 °C·min^?1. By the modified Coats-Redfern integral method, the activation energy of 40% KHCO₃ sorbents is 102.43 kJ·mol^?1. The results obtained can be used as basic data for designing and operating CO₂ capture process.     

Double‐functional characteristics of a surface molecular imprinted adsorbent with immobilization of nano‐TiO2

A new chitosan molecular imprinted adsorbent obtained by immobilization of nano‐TiO₂ on the adsorbent surface (surface‐imprinted adsorbent with nano‐TiO₂) was prepared. Based on photocatalytic reaction and the surface molecular imprinting technology, this new kind of surface‐imprinted adsorbent with immobilization of nano‐TiO₂ can not only adsorb template metal ions but can also degrade organic pollutants. The results showed that, after the nano‐TiO₂ was immobilized on the adsorbent surface, the adsorption ability for the imprinted ion (Ni²⁺) of this new imprinted adsorbent immobilized with nano‐TiO₂ was not affected, but the degradation ability for p‐nitrophenol (PNP) of the surface‐imprinted adsorbent with nano‐TiO₂ increased three‐fold compared with that of the surface‐imprinted adsorbent without nano‐TiO₂, from 23.8 to 76.1% (at an initial PNP concentration of 20 mg·dm^?3). The optimal TiO₂ concentration in the adsorbent preparation was 0.025 g·TiO₂ g^?1 adsorbent. The removal capacity for PNP reached 60.25 mg·g^?1 (at 400 mg·dm^?3 initial PNP concentration) under UV irradiation. The surface‐imprinted adsorbent with nano‐TiO₂ can be reused for at least five cycles without decreasing the removal ability for PNP and the imprinted ion (Ni²⁺). Copyright © 2006 Society of Chemical Industry     

Effects of experimental variables on phosphate adsorption on bentonite

The adsorption process of phosphate ions on a bentonite from Almería (East-Andalucía, Spain) was studied at 30°C over a range of experimental conditions such as saline (0.1 M KCl) or non-saline medium, natural or calcium homoionic bentonite and different pH values. In order to calculate the adsorption capacities (X_m) of the samples, the experimental data points were fitted to the Langmuir equation. X_m values ranged from 0.42 μg P g^?1 for the natural sample in non-saline medium to 0.74 μg P g^?1 for the same sample in saline medium, the X_m value corresponding to the calcium homoionic bentonite sample being intermediate. At different pH conditions, X_m increased from 0.28 μg P g^?1 at a pH of 1.3 to 1.53 μg P g^?1 at a pH of 4.4, and then decreased to 0.42 μg P g^?1 at a pH of 8.7.     

Biosorption of heavy metals (Cd,Cu, Ni,Pb, Zn) by chemically-reinforced biomass of marine algae

Particles of two different sizes (0·105–0·295 mm and 0·84–1.00 mm diameter) of two marine algae, Sargassum fluitans and Ascophyllum nodosum, were crosslinked with formaldehyde (FA), glutaraldehyde (GA) or embedded in polyethylene imine (PEI), followed by glutaraldehyde crosslinking. They were used for equilibrium sorption uptake studies with cadmium, copper, nickel, lead and zinc. The metal uptake by larger particles (0·84–1·00 mm) was higher than that by smaller particles (0·105–0·295 mm). The order of adsorption for S. fluitans biomass particles was Pb > Cd > Cu > Ni > Zn, for A. nodosum copper and cadmium change places. Uptakes of metals range from q_max = 378 mg Pb g^?1 for S. fluitans (FA, big particles), to q_max = 89 mg Zn g^?1 for S. fluitans (FA, small particles) as the best sorption performance for each metal. Generally, S. fluitans is a better sorbent material for a given metal, size and modification, although there were several exceptions in which metal sorption by A. nodosum was higher. The metal uptake for different chemical modifications showed the order GA > FA > PEI. A comparison of different sorption models revealed that the Langmuir sorption model fitted the experimental data best.     

Co-digestion of Municipal Sewage Sludges and Pre-hydrolysed Woody Agricultural Wastes

Material balance has been used to evaluate the COD behaviour and the time required for fed-batch digestion of mixtures of domestic sludges and pre-hydrolysed agricultural wastes. Pre-hydrolysis of the feed materials has been used to penetrate the strong lignocellulosic structure of these wastes as well as to increase the fraction of soluble organic substances in the mixture. The influence of the organic loading rate on the main process parameters (methane, carbon dioxide, total biogas productions and their respective conversion yields) has also been investigated. The organic load has been varied from 0·8 up to 6·1 g_COD dm⁻³ day⁻¹, corresponding to a range of volatile solids load of 0·6–4·5 g_VS dm⁻³ day⁻¹ for the material under consideration. These values are slightly higher than those usually employed in conventional digester for domestic sewage sludges. However, methane production reached a maximum rate of only 5·6 mmol dm⁻³ day⁻¹ at an organic loading rate of 4·6 g_COD dm⁻³ day⁻¹, while both CH₄ content and production of biogas rapidly fell over 2·2 g_COD dm⁻³ day⁻¹. On the whole, these results suggest that removal of lignin is necessary in order to carry out the continuous anaerobic digestion of pre-hydrolysed agricultural wastes rich in woody materials. © 1997 SCI.     

Highly Efficient Removal of Congo red from Wastewater by Nano-Cao

Nano-CaO with high surface area of 120 m² · g^?1 has been used as adsorbents for Congo red adsorption from wastewater. The maximum adsorption capability of Congo red on nano-CaO reached 357.14 mg · g^?1 in 10 min, while the maximum capability on commercial CaO was only 238.66 mg · g^?1 in 30 min. In comparison with commercial CaO, some published metal oxides for Congo red adsorption such as Fe₂O₃, NiO, MgO, and Mn₂O₃, etc., the Nano-CaO exhibited much more favorable adsorptive property. In addition, the effects of pH, salt concentration, and temperature were also investigated, and these factors played significant roles for Congo red adsorption on Nano-CaO.     

Technological and kinetic aspects of sublethal acid toxicity in microbial gum production

Chemostat culture of Xanthomonas campestris were obtained at a dilution rate of 0·05 h⁻¹ and the normal feed then supplemented with 0·58 and 1·74 mmol dm⁻³ isobutyric acid (IBA). Data revealed that the organism responded to sublethal acid stress by overproducing xanthan. The acid additions led to transient zones in the continuous cultivation profiles. By adding feed containing 1·74 mmol dm⁻³ IBA, volumetric growth rate immediately decreased from 0·059 to 0·026 g dm⁻³ h⁻¹ whereas the specific xanthan formation rate increased from 0·23 g g⁻¹ biomass h⁻¹ to a maximum 0·65 g g⁻¹ biomass h⁻¹ (with 1·0 mmol dm⁻³ IBA addition), before decreasing as the concentration of acid attained that of the feed. By monitoring the outlet CO₂ in parallel with biomass and polysaccharide levels in the IBA fermentation a 10% diversion of the total carbon flux from biomass synthesis to xanthan biosynthesis was detected. A consistent pattern of variation in activity was detected in enzymes of intermediary metabolism, suggesting an action at the regulatory level. Enhanced activities of carbon catabolism and xanthan anabolic reactions (phosphomannose isomerase) were observed in the presence of the acid. Batch experiments carried out in the pres-ence of IBA gave results which correlated with the undissociated acid form con-centration. An undissociated acid fraction of 6·5×10⁻³ mmol dm⁻³ was calculated in a set of flasks under the same conditions and a statistically vali-dated 12% increase in xanthan production was found. The maximum activation was determined to be below 1·1×10⁻² mmol dm⁻³ when a 58% specific xanthan production rate increase occurred in parallel with a 35% decrease in biomass concentration.