Microbial transformation of androst‐4‐ene‐3, 17‐dione by Bordetella sp. B4 CGMCC 2229

BACKGROUND: Microbial transformation of steroids has attracted widespread attention, especially the transformation of those steroids synthesized with difficulty by chemical methods. In this study, microbial transformation of androst‐4‐ene‐3, 17‐dione (AD) by Bordetella sp. B4 was investigated, and the effect of temperature on transformation was studied. RESULTS: Three metabolites were purified by preparative TLC and HPLC, and identified as androsta‐1,4‐diene‐3,17‐dione (ADD), 9α‐hydroxyandrost‐4‐ene‐3, 17‐dione (9α‐OH‐AD), and 3‐hydroxy‐9, 10‐secoandrost‐1, 3, 5‐triene‐9, 17‐dione (3‐OH‐SATD) by nuclear magnetic resonance imaging (NMR), Fourier transform infrared spectroscopy (FTIR) and mass spectroscopy (MS). It was first reported that the genus of Bordetella has the capability of AD degradation. Microbial transformation of AD was performed at 30 °C, 37 °C, 40 °C and 45 °C. The 9α‐OH‐AD yield reached a maximum within 16 h when the strain was cultivated in media with AD as sole carbon at 37 °C. Surprisingly, ADD was produced by the strain cultivated at 40 °C but not at 37 °C, which was different from previous reports. It was deduced that the alcohol dehydrogenase that catalyzed the transformation of AD to ADD may be temperature sensitive. CONCLUSION: Androst‐4‐ene‐3,17‐dione was converted into 9α‐hydroxyandrost‐4‐ene‐3, 17‐dione and other metabolites rapidly by Bordetella sp. B4. It is anticipated that the strain Bordetella sp. B4 CGMCC 2229 can be used in the steroids industry. Copyright © 2009 Society of Chemical Industry     

Microbial conversion of sterol‐containing soybean oil production waste

Soybean extract residue (scum), a waste of soybean oil production, was examined as a raw material for C₁₇‐ketosteroid production. As a model process, its bioconversion to 9α‐hydroxyandrost‐4‐ene‐3,17‐dione (9‐OH‐AD) by Mycobacterium sp VKM Ac‐1817D was studied. The content of transformable sterols (sitosterol, stigmasterol and campesterol) in scum was estimated at ～14%. The bioconversion of scum to 9‐OH‐AD was characterized by a long lag‐period (300–350 h) followed by 9‐OH‐AD accumulation. The microbial or chemical elimination of fatty non‐identified components resulted in sterol‐enriched scum preparations. Effective conversion of these preparations by Mycobacterium sp was demonstrated: 9‐OH‐AD molar yield ～65% was reached at 60 h from the scum preparation containing 10 g dm^?3 transformable sterols. The process productivity was comparable with that for high quality‐sitosterol of wood origin (tall‐oil sitosterol). Copyright © 2004 Society of Chemical Industry     

Bioconversion of soysterols to androstenedione by Mycobacterium fortuitum subsp. fortuitum NCIM 5239, a mutant derived from total sterol degrader strain

BACKGROUND: The bioconversion of soysterols to androstenedione (AD) by microbial cleavage of C‐17 side chain is of practical interest since AD serves as the starting compound for the production of the majority of pharmaceutically active steroids. A total soysterols degrader strain was subjected to combined mitomycin C and UV treatments and a mutant designated Mycobacterium fortuitum subsp. fortuitum NCIM 5239 was isolated that accumulated AD as major bioconversion product. RESULTS: The maximum bioconversion of soysterols to AD (71.3 mol %) was obtained at 30 °C, pH 5, 15% inoculum grown for 48 h, glycerol (12.68 g L^?1) and urea (1.06 g L^?1) as carbon and nitrogen sources, respectively, at C:N ratio of 10, the use of 10% polypropylene glycol‐400 (PPG‐400) as soysterols carrier solvent and 3 mg mL^?1 concentration of soysterols after 240 h incubation period in shake flask culture. In a laboratory scale fermentor, a maximum of 64.8 mol % bioconversion of soysterols to AD was recorded after 99 h. CONCLUSION: The mutant Mycobacterium fortuitum subsp. fortuitum NCIM 5239 possesses high potential for industrial production of AD from soysterols. Copyright © 2010 Society of Chemical Industry     

Cast polyurethane elastomers obtained with N,N′‐ethyleneurea and 1,4‐butanediol as chain extenders

Tensile properties and dynamic mechanical thermal properties for polyurethane elastomers extended with N,N′‐ethyleneurea (EU) and 1,4‐butanediol (1,4‐BD) were investigated. Also gel permeation chromatography and extraction experiments for selected elastomers were performed. EU residues were introduced into polyurethane during prepolymer synthesis at 140°C. Such prepolymers with built‐in EU residues were extended with 1,4‐BD for different [NCO]/[OH] molar ratios. The use of EU chain extender produces in general polymers with inferior mechanical properties compared to the typical 1,4‐BD based polyurethanes, although some of the EU‐based polymers show improved strain‐stress parameters. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 75: 728–733, 2000     

Chemical structure of poly(β‐cyclodextrin‐co‐citric acid)

We synthesized water‐insoluble polymers, poly(β‐cyclodextrin‐co‐citric acid)s, by heating a mixture of citric acid, cyclodextrin (CD), and Na₂HPO₄ as a catalyst with a 6 : 1 : 2 molar ratio at 160, 170, and 180°C for 10 and 20 min. The chemical composition of the polyesters was determined by high pressure liquid chromatography (HPLC) analysis of the polymer hydrolysates. The crosslinking mechanisms and thermal degradation of the polymers were also investigated. The polyesters contained 30–35% citric acid, 1–4% unsaturated carboxylic acids (i.e., itaconic, cis‐aconitic, trans‐aconitic, and mesaconic acids), and 60–70% CD, whereas about 40% of them were able to form inclusion complexes. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

In situ formation and compounding of polyamide 12 by reactive extrusion

The anionic polymerization of lauryllactam was initiated at 270°C using sodium hydride as an initiator and N,N′‐ethylene‐bisstearamide (EBS) as an activator (NaH:EBS molar ratio of 2). Polymerization occurred in less than 2 min and was successfully performed in an internal mixer and a twin‐screw extruder with corotating intermeshing screws (Werner & Pfleiderer ZSK 25). The content of residual monomer, as determined by thermogravimetric analysis, was lower than 0.5 wt %. Molecular weight, as measured by size exclusion chromatography, was governed by the lauryllactam:NaH molar ratio calculated on a M_n of 25 kg/mol at a constant NaH:EBS molar ratio of 2. Blends were prepared in situ by polymerization of lauryllactam solutions of various polymers. When poly(ethylene‐co‐butylacrylate) (Lotryl®; Atofina) was dissolved in lauryllactam, rubber‐toughened polyamide 12 blends were obtained. Mechanical properties of the injection‐molded polymers were examined by stress–strain as well as notched Charpy impact tests at different temperatures. Blend morphologies were imaged by scanning electron microscopy (SEM). © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 344–351, 2003     

Synthesis of thermoplastic polyurethane and its physical and shape memory properties

In this article, thermoplastic polyurethane (PU) with a shape memory property was synthesized. First, the PU prepolymer was prepared by reacting poly(tetramethylene glycol) with 4,4′‐diphenylmethane diisocyanate, then extended with various extenders such as linear aliphatic 1,4‐butanediol, benzoyl‐type 4,4‐bis(4‐hydroxyhexoxy)‐isopropylane and naphthalate‐type bis(2‐phenoxyethanol)‐sulfone or naphthoxy diethanol. The experimental results showed that the tensile strength, elongation at break, and initial modulus at 300% of these copolymer films were in the range of 31–64 Mpa, 42%–614%, and 8.26–11.5 MPa, respectively. Thermal analysis showed that the glass‐transition temperature of these copolymers was in the range of ?73°C to ?50°C for the soft segment (T_gs) and 70°C–106°C for the hard segment (T_gh) and that the melting point was in the range of 14.6°C–24.2°C for the soft segment and 198°C–206°C for the hard segment. The extender with a benzoyl or naphthalate group was better able to promote its shape memory property than was the regular polyurethane. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 607–615, 2006     

Carica papaya latex: A low‐cost biocatalyst for human milk fat substitutes production

This work aims at evaluating the potential of Carica papaya lipase (CPL) self‐immobilized in papaya latex as a biocatalyst for the synthesis of human milk fat substitutes (HMFS), to be used as a low‐cost alternative to commercial lipases. Two different CPL preparations, one extracted from the papaya fruit (CPL I) and the other from petiole leaves (CPL II) of papaya tree, were tested as catalysts for the acidolysis between tripalmitin and (i) oleic acid or (ii) omega‐3 PUFA, batchwise, at 60°C, in solvent‐free media. After 24 h, molar incorporation was higher for oleic acid (22.1 mol%) when CPL I was used. This biocatalyst was selected for further studies. RSM was used to model reaction conditions: medium formulation (molar ratio oleic acid/tripalmitin, MR, 1.2:1–6.8:1) and temperature (58–72°C). Acyl migration decreased with MR increase. In batch operational stability assays at 60°C, using MR of 2:1 and 6:1, the highest stability was observed for a MR of 2:1. Practical applications: The use of this biocatalyst is a feasible way to valorize papaya agro‐residues which represent an important environmental problem in the producing countries. The obtained results were rather promising since, with this almost zero‐cost biocatalyst, it was possible to produce a high added‐value product (HMFS). Under optimized conditions, the obtained results were comparable with those obtained with expensive immobilized commercial lipases.     

Polymerization of epoxidized soybean oil with maleinized polybutadiene

Epoxidized soybean oil (ESO) triglycerides were reacted with maleinized polybutadiene (MMPBD) to give plant‐oil‐based thermoset polymers. MMPBD samples were of two different molecular weights [high‐molecular‐weight maleinized polybutadiene (MMPBD‐H), maleate content = 10%, number‐average molecular weight (M_n) = 9000, and low‐molecular‐weight maleinized polybutadiene (MMPBD‐L), maleate content = 15%, M_n = 5000]. To increase the crosslink density of the product, a free‐radical initiator, benzoyl peroxide, was added to this mixture to further crosslink MMPBD through its double bonds. The characterizations of the products were done by dynamic mechanical analysis, differential scanning calorimetry, thermogravimetric analysis, and IR spectroscopy. The ESO–MMPBD polymers were crosslinked rigid infusible polymers. ESO–MMPBD‐H–1 : 1 and ESO–MMPBD‐L–1 : 1 showed glass‐transition temperature values at −23, 78 and −17, 64°C, respectively, whereas the storage moduli of the two polymers at 25°C were 13 and 16 MPa, respectively. The storage moduli of the polymers remained the same or decreased with the addition of a free‐radical initiator. The storage moduli also decreased with increasing ESO concentration above a 1 : 1 epoxy‐to‐anhydride molar ratio. The surface hardness increased dramatically, and the equilibrium swelling ratio decreased with the addition of free‐radical initiator. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Synthesis and characterization of poly[(butylene succinate)‐co‐(butylene terephthalate)]‐b‐poly(tetramethylene glycol) segmented block copolymer

Polyester‐polyether segmented block copolymers of poly[(butylene succinate)‐co‐poly(butylene terephthalate)] (PBS–PBT) and poly(tetramethylene glycol) (PTMG) (M_n = 2000) with various compositions were synthesized. PBT content in the PBS was adjusted to ca. 5 mol %. Their thermal and mechanical properties were investigated. In the case of copolymer, the melting point of the PBS–PBT control was 107.8°C, and the melting point of the copolymer containing 70 wt % of PTMG was 70.1°C. Crystallinity of soft segment was 5 ∼ 17%, and that of hard segment was 42 ∼ 59%. The breaking stress of the PBS–PTMG control was 47 MPa but it decreased with increasing PTMG content. In the case of copolymer containing 70 wt % of PTMG, breaking stress was 36 MPa. Contrary to the decreasing breaking stress, breaking strain increased from 300% for PBS–PBT control to 900% for a copolymer containing 70 wt % of PTMG. The shape recovery ratios of the copolymer containing 70 wt % PTMG were almost twice of those of copolymers containing 40 wt % PTMG. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 79: 2067–2075, 2001     

Utilization of Oil Industry Residues for the Production of Rhamnolipids by Pseudomonas indica

In the present work, a new strain Pseudomonas indica MTCC 3714 was studied for the production of biosurfactants using various rice‐bran oil industry residues viz. rice‐bran, de‐oiled rice‐bran, fatty acids and waxes. Among all the carbon sources, a maximum reduction in surface tension (26.4 mN/m) was observed when the media were supplemented with rice‐bran and the biosurfactant was recovered using the ultrasonication technique as one of the steps in the extraction process. Biosurfactants were obtained in yields of about 9.6 g/L using rice‐bran as the carbon source. The structure of the biosurfactants as characterized by FT‐IR, NMR (¹H and ¹³C) and LC–MS analysis revealed that the majority of the biosurfactants were di‐rhamnolipids. The biosurfactants produced were able to emulsify various hydrocarbons and showed excellent potential in microbial enhanced oil recovery, as it was able to recover kerosene up to 70 % in a sandpack test.     

Synthesis,characterization, and in vitro drug‐release properties of 2‐hydroxyethyl methacrylate copolymers

2‐Hydroxyethyl methacrylate was copolymerized with acrylamide, N‐vinyl‐2‐pyrrolidone, and n‐butyl methacrylate by free‐radical solution polymerization with α,α′‐azobisisobutyronitrile as an initiator at 70 ± 1°C. The average molecular weights and molar compositions of the resultant copolymers were determined with gel permeation chromatography and ¹H‐NMR spectroscopy data, respectively. Diclofenac or 2‐[(2,6‐dichlorophenyl)amino]benzene acetic acid, a nonsteroidal anti‐inflammatory drug, was chemically attached to the copolymers by transesterification reaction in the presence of N,N′‐dicyclohexylcarbodiimide to give macromolecular prodrugs. All the synthesized polymers were characterized with Fourier transform infrared, ¹H‐, and ¹³C‐NMR spectroscopy techniques. The polymer–drug conjugates were hydrolyzed in cellophane member dialysis bags containing aqueous buffered solutions (pH 8) at 37°C, and the hydrolysis solutions were detected by UV spectrophotometer at selected intervals. The results showed that the drug could be released by selective hydrolysis of the ester bond from the side chain of the drug moiety. The release profiles of the drug indicated that the hydrolytic behavior of polymeric prodrugs strongly depends on the hydrophilicity of the polymer. The results suggest that the synthesized copolymers could be useful carriers for the release of diclofenac in controlled‐release systems. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 2403–2409, 2007     

New soluble cyano‐containing poly(arylene ether) copolymers bearing pendant xanthene groups

Homopolymers and copolymers of poly(arylene ether nitrile) (PAEN)‐bearing pendant xanthene groups were prepared by the nucleophilic substitution reaction of 2,6‐difluorobenzonitrile with 9,9‐bis(4‐hydroxyphenyl)xanthene (BHPX) and with various molar proportions of BHPX to hydroquinone (100/0 to 40/60) with N‐methyl‐2‐pyrrolidone (NMP) as a solvent in the presence of anhydrous potassium carbonate. These polymers had inherent viscosities between 0.61 and 1.08 dL/g, and their weight‐average molecular weights and number‐average molecular weights were in the ranges 34,200–40,800 and 17,800–20,200, respectively. All of the PAENs were amorphous and were soluble in dipolar aprotic solvents, including NMP, N,N‐dimethylformamide, and N,N‐dimethylacetamide and even in tetrahydrofuran and chloroform at room temperature. The resulting polymers showed glass‐transition temperatures (T_g's) between 220 and 257°C, and the T_g values of the copolymers were found to increase with increasing BHPX unit content in the polymer. Thermogravimetric studies showed that all of the polymers were stable up to 422°C with 10% weight loss temperatures ranging from 467 to 483°C and char yields of 54–64% at 700°C in nitrogen. All of the new PAENs could be cast into transparent, strong, and flexible films with tensile strengths of 106–123 MPa, elongations at break of 13–17%, and tensile moduli of 3.2–3.7 GPa. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Characterization of photo‐ and thermoresponsible amphiphilic copolymers having azobenzene moieties as side groups

Two series of amphiphilic copolymers, poly(HPMA‐co‐MPAP) I–V with n = 0.05–0.29 of the molar ratio of MPAP and poly(HPMA‐co‐MPAH)‐I–V with n = 0.05–0.23 of the molar ratio of MPAH, were prepared by radical copolymerization of N‐(2‐hydroxypropyl) methacrylamide (HPMA) with azo‐monomers such as 4‐(4‐methoxyphenylazo) phenyl methacrylate (MPAP) and 6‐[4‐(4‐methoxyphenylazo) phenoxy] hexyl methacrylate (MPAH) using 2,2′‐azobisisobutyronitrile as an initiator. Self‐organization of these copolymers in water was confirmed by disappearance of the proton signal of the methoxyazobenzene in ¹H‐NMR spectra measured in the solvent system of D₂O and CD₃OD. It was also found from the λ_max, located near 344 nm, that azobenzene groups self‐organized to form the dimeric chromophore type of aggregate. The aqueous solutions of poly(HPMA‐co‐MPAP) and poly(HPMA‐co‐MPAH) exhibited the lower critical solution temperature (LCST) from at 68 to 40°C and from at 70 to 52°C in the dark state, respectively, with increasing the molar ratios of azo‐monomers. On the other hand, the LCST measured in the photostationary state showed the higher temperature by 2–4°C compared with that in the dark state. It was found that the adsorption of poly(HPMA‐co‐MPAP)‐V (n = 0.29) on polystyrene microspheres was photoregulated. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 3056–3063, 2001     

High Electric‐Induced Strain and Temperature‐Dependent Piezoelectric Properties of 0.75BF–0.25BZT Lead‐Free Ceramics

0.75BiFeO₃–0.25Ba(Zr_xTi_1?x) + 0.6 wt% MnO₂ (0.75BF–0.25BZT) ceramics with Mn addition were prepared by the solid‐state reaction method. The high‐field strain and high‐temperature piezoelectric properties of 0.75BF–0.25BZT ceramics were studied. Introduction of Zr in the solid solutions decreased the Curie temperature slightly, and improved the dielectric and piezoelectric properties obviously. The piezoelectric properties of 0.75BZT–0.25BT ceramics reached the maximum at Zr content of 10 mol%. The Curie temperature T_c, dielectric constant ε and loss tanδ (1 kHz), piezoelectric constant d₃₃, and planner electromechanical coupling factor k_p of 0.75BF–0.25BZT ceramics with 10 mol% Zr were 456°C, 650, 5%, 138 pC/N, and 0.30, respectively. The high‐field bipolar and unipolar strain under an electric field of 100 kV/cm reached up to 0.55% and 0.265%, respectively, which were comparable to those of BiScO₃–PbTiO₃ and “soft” PZT‐based ceramics. The typical “butterfly”‐shaped bipolar strain and frequency‐dependent peak‐to‐peak strain indicated that the large high‐field‐induced strain may be due to non‐180° domain switching. Rayleigh analysis reflected that the improved piezoelectric properties resulted from the enhanced extrinsic contribution by Zr doping. The unipolar strain of 0.75BF‐0.25BZT ceramics with 10 mol% Zr was almost linear from RT to 200°C. These results indicated that 0.75BF–0.25BZT ceramics were promising candidates for high‐temperature and lead‐free piezoelectric actuators.     

Catalytic Hydrocracking of a Bitumen‐Derived Asphaltene over NiMo/γ‐Al2O3 at Various Temperatures

Hydrocracking of a bitumen‐derived asphaltene over NiMo/γ‐Al₂O₃ was investigated in a microbatch reactor at varying temperatures. The molar kinetics of asphaltene cracking reaction was examined by fitting the experimental data. Below a defined temperature, the molar reaction showed the first‐order kinetic feature while at higher temperatures secondary reactions such as coke formation became significant, causing deviation of the reaction behavior from the proposed first‐order kinetic model. Selectivity analysis proved that dominant products varied from gases to liquids to gases with increasing temperature, shifting the dominant reaction from C–S bonds cleavage to C–C bonds cleavage.     

Thermosensitive copolymer synthesized by controlled living radical polymerization: Phase behavior of diblock copolymers of poly(N‐isopropyl acrylamide) families

In this study, we prepared a series of thermosensitive polymers with low polydispersity index (PDI) values by nitroxide‐mediated controlled radical polymerization (NMRP) with 2,2,6,6‐tetramethyl‐1‐piperdinyloxy nitroxide (TEMPO) as a stable nitroxide‐free radical. Poly(N‐isopropyl acrylamide) (PNIPAAm)‐block‐poly(N‐tert‐butyl acrylamide) (PNTBA) was successfully synthesized, first, through polymerization with N‐isopropyl acrylamide to obtain the reactive polymer PNIPAAm‐TEMPO and, second, through polymerization by the addition of N‐tert‐butyl acrylamide (NTBA). The added molar fraction of NTBA during the second polymerization was adjusted accordingly to obtain the final polymerization product, a thermosensitive polymer (PNIPAAm‐block‐PNTBA), which had a targeted lower critical solution temperature (LCST). The result shows that the synthesis method used in this study effectively controlled the formation of the polymer to obtain a low PDI. The thermosensitive block copolymer, PNIPAAm‐b‐PNTBA (molar ratio = 9:1), with LCSTs in the range 27.7–39.8°C, was obtained through controlled living radical polymerization with PNIPAAm–TEMPO. Specifically, the 5 wt % aqueous solution of PNIPAAm‐b‐PNTBA (molar ratio = 9:1) had an LCST of 37.4°C; this was close to body temperature, 37°C. The 5 wt % aqueous solution of PNIPAAm‐b‐PNTBA (molar ratio = 9:1) showed potential for use in biomedical applications. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43224.     

Poly(Li‐2‐hydroxyethyl methacrylate)‐co‐poly(4‐vinyl pyridine): Molar mass effects on strong electrorheological response

Electrorheological (ER) fluids display remarkable rheological behavior, being able to convert rapidly and repeatedly from a fluid to a solid‐like when an external electric field (E) is applied or removed. In this study, electrical and ER properties of poly(Li‐2‐hydroxyethyl methacrylate)‐co‐poly(4‐vinyl pyridine), poly(Li‐HEMA)‐co‐poly(4‐VP), copolymeric salts (ionomers) were investigated. For this purpose six ionomers were synthesized with different molar masses. They were then ground‐milled for a few hours to obtain micron size ionomers. The particle sizes of the ionomers were determined by dynamic light scattering. Suspensions of ionomers were prepared in silicone oil (SO), at a series of concentrations (c = 5–30%, m/m). The gravitational stability of suspensions against sedimentation was determined at constant temperature (T = 25°C). Flow times of the suspensions were measured under no electric field (E = 0 kV/mm), and under an external applied electric field (E ≠ 0 kV/mm) strengths and a strong ER activities were observed for all the poly(Li‐HEMA)‐co‐poly(4‐VP)/SO suspensions. Further, the effects of suspension concentration, mole ratios of poly(HEMA) and poly(4‐VP), and the overall molar mass of the copolymers, shear rate, electric field strength, frequency, promoter, and temperature onto ER activities of ionomer suspensions were investigated. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 1065–1074, 2006     

Interpolymer‐specific interactions and miscibility in poly(styrene‐co‐acrylic acid)/poly(styrene‐co‐N,N‐dimethylacrylamide) blends

The miscibility or complexation of poly(styrene‐co‐acrylic acid) containing 27 mol % of acrylic acid (SAA‐27) and poly(styrene‐co‐N,N‐dimethylacrylamide) containing 17 or 32 mol % of N,N‐dimethylacrylamide (SAD‐17, SAD‐32) or poly(N,N‐dimethylacrylamide) (PDMA) were investigated by different techniques. The differential scanning calorimetry (DSC) analysis showed that a single glass‐transition temperature was observed for all the mixtures prepared from tetrahydrofuran (THF) or butan‐2‐one. This is an evidence of their miscibility or complexation over the entire composition range. As the content of the basic constituent increases as within SAA‐27/SAD‐32 and SAA‐27/PDMA, higher number of specific interpolymer interactins occurred and led to the formation of interpolymer complexes in butan‐2‐one. The qualitative Fourier transform infrared (FTIR) spectroscopy study carried out for SAA‐27/SAD‐17 blends revealed that hydrogen bonding occurred between the hydroxyl groups of SAA‐27 and the carbonyl amide of SAD‐17. Quantitative analysis carried out in the 160–210°C temperature range for the SAA‐27 copolymer and its blends of different ratios using the Painter–Coleman association model led to the estimation of the equilibrium constants K₂, K_A and the enthalpies of hydrogen bond formation. These blends are miscible even at 180°C as confirmed from the negative values of the total free energy of mixing ΔG_M over the entire blend composition. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 1011–1024, 2007     

Synthesis and Polymerization of Epoxy Methacrylates, 2. Acylated Epoxy Methacrylates and their Copolymers

Partially (20–75%) acylated isopropylidene‐bis[1,4‐phenyleneoxy(2‐hydroxytrimethylene)] dimethacrylate (BisGMA) was prepared by a single step reaction of 2,2‐bis[4‐(2,3‐epoxypropoxy)phenyl]propane (DGEBA) with methacrylic acid (MAA), methacrylic anhydride (MAAn) and/or acetic anhydride catalyzed by 0.8 mol‐% N‐methylimidazole at 90–100°C. In any case, MAA was substituted by an equimolar quantity of the anhydride. The reaction kinetics of DGEBA with MAA and MAAn follows a first order law up to a conversion of epoxy groups corresponding to the initial molar ratio of MAAn. For different mole fractions x_MAA, the reaction rate was found to be directly proportional to x^0.5_MAA. The viscosity of BisGMA decreased with an increase in the acylation degree. Acylated BisGMA was copolymerized with triethylene glycol dimethacrylate (TEGMA) by use of a redox initiator system at room temperature and with vinyltoluene (VT) initiated by di‐tert‐butyl peroxide at 150–200°C, respectively, both in the presence of 70–76 wt.‐% of quartz filler. Different dependencies of the content of sol and the conversion of C=C double bonds were observed for thermally polymerized composites from VT with acetylated and methacrylated BisGMA, respectively. Methacrylated BisGMA yielded composites with reduced water uptake. The higher network density of the polymer matrix with methacrylated BisGMA resulted in a higher glass transition temperature T_g and a higher storage modulus of the composites. The initial temperature of weight loss of composites with VT was increased from 230°C for composites with BisGMA up to 258°C for composites with BisGMA methacrylated to a degree of 40%.