共查询到19条相似文献,搜索用时 484 毫秒
1.
2.
针对应用动网格方法计算油膜轴承性能时出现网格扭曲而导致累计误差过大的现象,提出了一种基于计算流体动力学(CFD)的滑动轴承油膜性能计算的动网格更新方法。该方法保证了网格更新过程中膜厚方向的网格线沿圆周方向上等均分布,且始终垂直于轴颈表面,网格不发生扭曲变形,减小了计算累计误差,提高了轴承性能计算的准确性。通过与典型算例和实验结果对比,验证了所提方法在轴承的油膜力和转子静平衡位置计算中的有效性、可行性和稳定性,并利用该方法分析了进油压力和载荷对油膜轴承所支撑转子静平衡位置的影响。该方法可为准确计算油膜轴承转子系统的性能提供参考。 相似文献
3.
4.
为研究外载荷对轴承转子系统稳定性的影响,以小孔节流的液体动静压球轴承转子系统为研究对象,建立液体动静压球轴承转子系统动力学模型。通过求解轴承润滑数学模型获得非线性油膜力,分析转子所受到的外载荷,采用欧拉算法预测出轴心下一个时刻位移、速度和加速度,并分析转子系统质量、不平衡载荷和阶跃载荷对转子回转精度的影响。结果表明:随着转子系统质量的增加,所需平衡的油膜力增加,轴心振动幅度增加,从而导致转子回转精度降低;相对于不考虑不平衡载荷,考虑不平衡载荷后其振动形态为椭圆且振动幅值增大,减小不平衡值将减小振幅并提高旋转精度;随着阶跃载荷的增加,达到平衡所需的时间也增加。 相似文献
5.
6.
建立了非线性油膜力作用下的转子-轴承系统的动力学模型,应用非线性动力学理论对该系统进行了研究,应用数值方法得到转子-轴承系统的油膜力大小随转子回转角速度Ω变化的曲线,得出油膜力的形状及刚度与转速密切相关;根据油膜力-位移曲线,显示出油膜力的强非线性.为有效诊断滑动轴承支撑下的转子-轴承系统油膜涡动故障提供了理论依据. 相似文献
7.
8.
安装在移动载体上的电磁轴承-转子系统往往会受到来自其承载基础的振动激励干扰。对单自由度支承模型和多自由度转子模型在基础激励条件下的动力学响应进行比较分析,认为可以将基础激励引起的电磁轴承-转子系统定转子之间的相对运动等效为一个由基础加速度决定的强迫振动。提出一种基于基础加速度信号作为参考信号的自适应滤波器的电磁轴承-刚性转子系统基础激励响应抑制方法,并分析该方法抑制各种类型振动的有效范围,所需滤波器的阶数,以及滤波器自适应收敛的最佳权值。在电磁轴承-转子系统试验平台上进行试验,结果表明提出的控制方法对稳定的基础激励造成的转子振动响应能有效抑制,强制定转子间隙保持稳定,避免碰撞。 相似文献
9.
10.
基于振动信号非线性度建立了滑动轴承-转子系统支承松动状态评估方法。针对滑动轴承-转子系统支承松动故障,运用转子动力学、机械振动等理论分别建立转子系统存在支承松动故障与无故障时的非线性动力学模型,其中松动间隙产生垂直方向弹性力采用非线性项进行描述。根据非线性度的定义,对支承松动系统动力学模型中滑动轴承油膜力采用8个系数动态特性线性化,松动故障弹性力部分采用泰勒展开进行近似,得到线性近似系统动力学模型。比较存在支承松动转子系统动力学模型与线性近似动力学模型的动力学行为差异,结合MATLAB数值积分方法,计算在不同松动间隙大小情况下滑动轴承-转子系统动力学行为非线性度,建立非线性度与松动程度之间的关系,直观地反映出支承松动故障对滑动轴承-转子系统动力学行为的影响程度,为转子轴承系统的支承松动状态评估提供一种新的思路。 相似文献
11.
Journal bearings are important parts to keep the high dynamic performance of rotor machinery. Some methods have already been proposed to analysis the flow field of journal bearings, and in most of these methods simplified physical model and classic Reynolds equation are always applied. While the application of the general computational fluid dynamics (CFD)-fluid structure interaction (FSI) techniques is more beneficial for analysis of the fluid field in a journal bearing when more detailed solutions are needed. This paper deals with the quasi-coupling calculation of transient fluid dynamics of oil film in journal bearings and rotor dynamics with CFD-FSI techniques. The fluid dynamics of oil film is calculated by applying the so-called ’’dynamic mesh’’ technique. A new mesh movement approach is presented while the dynamic mesh models provided by FLUENT are not suitable for the transient oil flow in journal bearings. The proposed mesh movement approach is based on the structured mesh. When the journal moves, the movement distance of every grid in the flow field of bearing can be calculated, and then the update of the volume mesh can be handled automatically by user defined function (UDF). The journal displacement at each time step is obtained by solving the moving equations of the rotor-bearing system under the known oil film force condition. A case study is carried out to calculate the locus of the journal center and pressure distribution of the journal in order to prove the feasibility of this method. The calculating results indicate that the proposed method can predict the transient flow field of a journal bearing in a rotor-bearing system where more realistic models are involved. The presented calculation method provides a basis for studying the nonlinear dynamic behavior of a general rotor-bearing system. 相似文献
12.
Qiang Li Shuo Zhang Long Ma Weiwei Xu Shuiying Zheng 《Journal of Mechanical Science and Technology》2017,31(5):2083-2091
The dynamic coefficients of journal bearing are necessary components in the analysis of linear stability and response of rotating dynamic systems. We propose a new method for the numerical identification of bearing support force coefficients in flexible rotor-bearing systems based on the 3D transient flow calculation. The CFD commercial software FLUENT is mainly used in this simulation, which employs a finite volume method for the discretization of the Navier-Stokes equations. To determine the dynamic coefficients, a new mesh movement approach is presented to update the volume mesh when the journal moves during the 3D transient flow calculation of a journal bearing. Existing dynamic mesh models provided by FLUENT are not suitable for the transient oil flow in journal bearings. Measurements and identification are performed on a test rotor supported on a pair of identical two-lobe fluid film bearings, and the results obtained from the CFD methods agree well with experimental results. The results indicate that the methods proposed in this paper can predict the dynamic coefficients of the journal bearing in a rotor-bearing system effectively, and provide a further tool for stability analysis. 相似文献
13.
14.
长周期变转速下入口油温对高速轻载涡轮增压器转子振动特性影响 总被引:1,自引:0,他引:1
高速轻载涡轮增压器转子系统的入口油温在长周期变转速运行条件下会产生动态变化,从而改变转子系统振动特性甚至导致非线性振动事故。以某型汽油机用高速轻载涡轮增压器转子为研究对象,分析浮环轴承内油膜最小厚度与偏心率随入口油温参数的变化规律,构建涡轮增压器转子-浮环轴承系统动力学有限元模型,采用Newmark积分法分析转子系统的非线性瞬态响应,结合涡轮增压器升速实验,得到不同入口油温下转子系统三维振动瀑布图与Colormap频谱图,探究入口油温对转子系统振动响应特性的影响。结果表明:随着入口油温从50℃增至130℃时,内油膜最小厚度会减少,环速比与偏心率会增加,内油膜振荡幅值逐渐降低,但出现内油膜振荡与外油膜涡动的轴颈转速点会提前约30%,且外油膜涡动幅值会逐步增加。综合内外油膜涡动与振动幅值,入口油温约为90℃时转子振动情况较好。结论可为设计具有智能抗振性能的高速轻载涡轮增压器转子系统的运行参数提供理论参考。 相似文献
15.
16.
17.
18.
可控阻尼磁流体滑动轴承的设计及减振性能研究 总被引:2,自引:0,他引:2
设计一种具有可控阻尼效应的铁磁流体轴承。该新型磁流体轴承采用阻尼可控磁流体代替传统普通滑动轴承内外环间隙中的润滑油,可通过外磁场调节内磁流体的黏度阻尼,来控制轴承的振动。建立由伺服电机、涡流传感器和数据采集系统组成的磁流体轴承性能测试系统,研究不同转速和电流下轴承的振动情况。结果表明:在外磁场作用下,磁流体轴承的振动幅度明显减小;同时施加的电流越大,对振幅的抑制作用越明显,表明磁流体滑动轴承的减振效果明显,且其阻尼是可控的。 相似文献
19.
考虑气穴的影响,建立了油膜轴承所支撑转子系统的动力学模型,并利用新的动网格更新方法,编制了求解油膜轴承压力分布、转子静平衡位置以及轴心轨迹的程序,验证了其正确性。利用该程序考察了气穴压力和转速对油膜轴承压力分布和所支撑转子的轴心静平衡位置的影响。计算结果表明,在相同的速度和载荷下,随着气化压力升高,轴承偏心率和最大油膜压力增大,偏位角减小,并且最大油膜压力的周向位置受气化压力的影响较小;而在相同的载荷下,转速对转子静平衡位置影响较大,并随着转速增加,轴承偏心率减小,偏位角增加。 相似文献