Long Chain Branched Polypropene Prepared by Means of Propene Copolymerization with 1,7‐Octadiene Using MAO‐Activated rac‐Me2Si(2‐Me‐4‐Phenyl‐Ind)2ZrCl2

Small amounts of 1,7‐octadiene (OD) comonomer, ranging from 0.5–5.0 mol‐%, were added during propene polymerization, catalyzed with methylalumoxane (MAO) activated rac‐Me₂Si(2‐Me‐4‐phenyl‐Ind)₂ZrCl₂ (MPI), in order to incorporate long chain branches and small amounts of high molecular mass polypropene (PP), thus improving melt processability of isotactic metallocene‐polypropene. As a function of the OD content the PP melting temperatures varied from 120 to 160°C. The presence of long chain branches was reflected by increased zero shear viscosities combined with pronounced shear thinning behavior in the case of propene/OD copolymers with molecular mass distribution of M̄_w/M̄_n < 4. Rheological measurements clearly revealed crosslinking occurring at high OD content. OD addition impaired catalyst activities. However, in the presence of trace amounts of ethene, catalyst activities increased significantly even in the presence of high OD content.     

Controlled radical double ring‐opening polymerization of 2‐methylene‐1,4,6‐trioxaspiro[4,4]nonane

Controlled radical double ring‐opening polymerization of 2‐methylene‐1,4,6‐trioxaspiro[4,4]nonane (MTN) has been achieved with tert‐butyl perbenzoate (TBPB) as initiator in the presence of 2,2,6,6‐tetramethyl‐1‐piperidinyloxy free radical (TEMPO) at 125 °C. The molecular weight polydispersity of the polymers is obviously lower than that of polymers obtained by conventional procedures. As the [TEMPO]/[TBPB] molar ratio increased, the polydispersity decreased and a polydisperty as low as 1.2 was obtained at high TEMPO concentration. With the conversion of the monomer increasing, the molecular weight of the polymers turned higher and a linear relationship between the M_w and the monomer conversion was observed. The monomer conversion, however, did not exceed 30 %. © 2000 Society of Chemical Industry     

Synthesis of star‐shaped poly(ϵ‐caprolactone) by samarium‐based tetrafunctional initiator and its dilute‐solution properties

An in situ–generated tetrafunctional samarium enolate from the reduction of 1,1,1,1‐tetra(2‐bromoisobutyryloxymethyl)methane with divalent samarium complexes [Sm(PPh₂)₂ and SmI₂] in tetrahydrofuran has proven to initiate the ring‐opening polymerization of ?‐caprolactone (CL) giving star‐shaped aliphatic polyesters. The polymerization proceeded with quantitative conversions at room temperature in 2 h and exhibited good controllability of the molecular weight of polymer. The resulting four‐armed poly(?‐caprolactone) (PCL) was fractionated, and the dilute‐solution properties of the fractions were studied in tetrahydrofuran and toluene at 30°C. The Mark–Houwink relations for these solvents were [η] = 2.73 × 10^?2M_w^0.74 and [η] = 1.97 × 10^?2M_w^0.75, respectively. In addition, the unperturbed dimensions of the star‐shaped PCL systems were also evaluated, and a significant solvent effect was observed. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 175–182, 2006     

Chain extension of recycled poly(ethylene terephthalate) with 2,2′‐(1,4‐phenylene)bis(2‐oxazoline)

The present work provides improved recycled high molecular weight poly(ethylene terephthalate) (PET) by chain extension using 2,2′‐(1,4‐phenylene)bis(2‐oxazoline) (PBO) as the chain extender. PBO is a very reactive compound toward macromolecules containing carboxyl end groups but not hydroxyl end groups. In the case of PET, where both species are present, for even better results, phthalic anhydride (PA) was added in the initial sample, before the addition of PBO. With this technique, we succeeded in increasing the carboxyl groups by reacting PA with the hydroxyl terminals of the starting polymer. From this modification of the initial PET sample, PBO was proved an even more effective chain extender. So, starting from a recycled PET with intrinsic viscosity [η] = 0.78, which would be [η] = 0.69 after the aforementioned treatment without a chain extender or M̄_n = 19,800, we prepared a PET grade having [η] = 0.85 or M̄_n = 25,600 within about 5 min. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 77: 2206–2211, 2000     

Synthesis,characterization and thermal degradation of poly[2‐(3‐p‐bromophenyl‐3‐methylcyclobutyl)‐2‐hydroxyethylmethacrylate]

In this work, 2‐(3‐p‐bromophenyl‐3‐methylcyclobutyl)‐2‐hydroxyethylmethacrylate (BPHEMA) [monomer] was synthesized by the addition of methacrylic acid to 1‐epoxyethyl‐3‐bromophenyl‐3‐methyl cyclobutane. The monomer and poly(BPHEMA) were characterized by FT‐IR and [¹H] and [¹³C]NMR. Average molecular weight, glass transition temperature, solubility parameter, and density of the polymer were also determined. Thermal degradation of poly[BPHEMA] was studied by thermogravimetry (TG), FT‐IR. Programmed heating was carried out at 10 °C min⁻¹ from room temperature to 500 °C. The partially degraded polymer was examined by FT‐IR spectroscopy. The degradation products were identified by using FT‐IR, [¹H] and [¹³C]NMR and GC‐MS techniques. Depolymerization is the main reaction in thermal degradation of the polymer up to about 300 °C. Percentage of the monomer in CRF (Cold Ring Fraction) was estimated at 33% in the peak area of the GC curve. Intramolecular cyclization and cyclic anhydride type structures were observed at temperatures above 300 °C. The liquid products of the degradation, formation of anhydride ring structures and mechanism of degradation are discussed. © 1999 Society of Chemical Industry     

Copolymerization of phenylisocyanate and ϵ‐caprolactone with rare earth chloride systems

A copolymer of phenylisocyanate (PhNCO) and ε‐caprolactone (CL) was synthesized by the rare earth chloride systems lanthanide chloride isopropanol complex (LnCl₃·3iPrOH) and propylene epoxide (PO). Polymerization conditions were investigated, such as lanthanides, reaction temperature, monomer feed ratio, La/PO molar ratio, and aging time of catalyst. The optimum conditions were: LaCl₃ preferable, [PhNCO]/[CL] in feed = 1 : 1 (molar ratio), 30°C, [monomer]/[La] = 200, [PO]/[La] = 20, aging 15 min, polymerization in bulk for 6 h. Under such conditions the copolymer obtained had 39 mol % PhNCO with a 78.2% yield, M_n = 20.3 × 10³, and M_w/M_n = 1.60. The copolymers were characterized by GPC, TGA, ¹H‐NMR, and ¹³C‐NMR, and the results showed that the copolymer obtained had a blocky structure with long sequences of each monomer unit. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 2135–2140, 2007     

Wetting behaviour and direct observation of thermally responsive polystyrene‐block‐poly(N‐isopropylacrylamide)‐block‐polystyrene electrospun fibres in aqueous environment

Electrospun fibres of thermally responsive triblock copolymer polystyrene‐block‐poly(N‐isopropylacrylamide)‐block‐polystyrene were prepared. Fibre morphology and swelling were studied below and above the lower critical solution temperature of poly(N‐isopropylacrylamide) (PNIPAM) using cryo‐electron microscopy. Cryo‐transmission electron microscopy showed that the fibre diameter increased up to 150% after immersion in water at 20 °C. In contrast, at 45 °C the fibre diameter increased considerably less. The sessile drop technique was used to characterize temperature‐dependent wetting of fibre mats. Contact angle (θ_CA) measurements revealed that a block copolymer fibre mat changed from hydrophobic (θ_CA > 90°) to hydrophilic (θ_CA < 90°) state within seconds after applying a water droplet on it at 20 °C. At 40 °C the initial contact angle was measured to be higher (135°) and it decreased much less than at 20 °C during the first minute of measurement. We observed using scanning electron microscopy that the electrospun fibres of the block copolymer having 77 wt% of PNIPAM lost their cylindrical shape and changed from fibres to thin sheets at both 20 and 40 °C within seconds after applying water on the fibres. Fibres having 55 wt% of PNIPAM were observed to be stable in water at both 20 and 40 °C, which resulted, surprisingly, in fibre mats with the strongest effects on thermally sensitive wetting. We discuss the surprising results and the implications that the evolution of fibre surface roughness has on the long‐term wetting behaviour, demonstrating a self‐adaptable hydrophilicity/hydrophobicity nature of the fibre mats. © 2013 Society of Chemical Industry     

Thermogravimetric analysis of poly(3‐hydroxybutyrate) and poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate)

The thermal degradation of poly(3‐hydroxybutyrate) (PHB) and poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) [P(HB‐HV)] was studied using thermogravimetry (TG). In the thermal degradation of PHB, the temperature at the onset of weight loss (T_o) was derived by T_o = 0.97B + 259, where B represents the heating rate (°C/min). The temperature at which the weight loss rate was maximum (T_p) was T_p = 1.07B + 273, and the final temperature (T_f) at which degradation was completed was T_f = 1.10B + 280. The percentage of the weight loss at temperature T_p (C_p) was 69 ± 1% whereas the percentage of the weight loss at temperature T_f (C_f) was 96 ± 1%. In the thermal degradation of P(HB‐HV) (7:3), T_o = 0.98B + 262, T_p = 1.00B + 278, and T_f = 1.12B + 285. The values of C_p and C_f were 62 ± 7 and 93 ± 1%, respectively. The derivative thermogravimetric (DTG) curves of PHB confirmed only one weight loss step change because the polymer mainly consisted of the HB monomer only. The DTG curves of P(HB‐HV), however, suggested multiple weight loss step changes; this was probably due to the different evaporation rates of the two monomers. The incorporation of 10 and 30 mol % of the HV component into the polyester increased the various thermal temperatures (T_o, T_p, andT_f) by 7–12°C (measured at B = 20°C/min). © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 80: 2237–2244, 2001     

Kinetics of atom transfer radical polymerization of crosslinkable terpolymer P(MMA‐BA‐HEMA)

A crosslinkable terpolymer P(MMA‐BA‐HEMA) was prepared by atom transfer radical copolymerization of 2‐hydroxyethyl methacrylate, methyl methacrylate and butyl acrylate. The structure of the terpolymer was characterized by ¹H NMR and gel permeation chromatography. The effects on the polymerization of ligand, initiator, solvent, CuCl₂ added in the initial stage and reaction temperature were investigated. The optimal reaction conditions were ethyl 2‐bromopropionate as initiator, CuCl/PMDETA as catalyst, cyclohexanone as solvent, catalyst/ligand = 1:1.5, [M]₀:[I]₀ = 200:1 and temperature 70 °C. The reaction followed first‐order kinetics with respect to monomer concentration, indicating the best control over the polymerization process, a constant concentration of the propagating radical during the polymerization, efficient control over M_n of the polymer and low polydispersity (M_w/M_n < 1.3). © 2013 Society of Chemical Industry     

Synthesis,photo‐, and electroluminescent properties of the soluble poly[(2,5‐diphenylene‐1,3,4‐oxadiazole)‐ 4,4′‐vinylene]

A novel soluble conjugated polymer, poly[(2,5‐diphenylene‐1,3,4‐oxadiazole)‐4,4′‐vinylene] (O‐PPV), containing an electron‐transporting group on the main chain of PPV, was synthesized according to HORNER mechanism. The oligo‐polymer with M_w = 1000 and T_d = 270°C is soluble in chloroform and tetrahydrofuran. The photoluminescent (PL) properties were investigated using different concentrations of solid‐state O‐PPV/PEO blends absorption and selective excitation measurements. The results show that PL arises from interchain charge‐transfer states in solid‐state O‐PPV. Compared with the analogous single‐layer device constructed with PPV (ITO/PPV/Al), which emits two peaks at λ = 520 nm and 550 nm (shoulder), the electroluminescence (EL) spectrum of the device [ITO/O‐PPV (80 nm)/Al] is a broad peak at λ_max = 509 nm. The quantum efficiency (0.13%) of the device ITO/O‐PPV/Al is much higher than that of the device ITO/PPV/Al, due to the introduction of the electron‐transporting group–oxadiazole units in the main chain of PPV. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 74: 3535–3540, 1999     

N‐(2‐biphenylenyl)‐4‐[2′‐phenylethynyl] phthalimide: 2. Detailed study of the monomer cure and properties of the resulting polymer

A detailed study is presented of the high‐temperature cure of the difunctional monomer N‐(2‐biphenylenyl)‐4‐[2′‐phenylethynyl]phthalimide (BPP) and the thermal properties of the resulting homopolymer. Although the phenylethynyl groups are consumed within 1 h at 370 °C, other reactions continue well after this, leading to a cured polymer whose glass transition temperature (T_g) is highly dependent on cure time and temperature. A T_g of 450 °C is achieved after a 16 h cure at 400 °C. Use of chemometrics to analyse the infrared spectra of curing BPP provides evidence for changes in the aromatic moieties during cure, perhaps indicative of co‐reaction between the biphenylene and phenylethynyl groups; however, other processes also contribute to the overall complex cure mechanism. Despite the high T_g values, BPP homopolymer exhibits unacceptably poor thermo‐oxidative stability at 370 °C, showing a weight loss of about 50 % after 100 h ageing. This is perhaps a result of formation of degradatively unstable crosslink structures during elevated‐temperature cure. Copyright © 2004 Society of Chemical Industry     

Synthesis and characterization of a random terpolymer of L‐lactide, ϵ‐caprolactone and glycolide

A random terpolymer of L ‐lactide (LL), ?‐caprolactone (CL) and glycolide (G) has been synthesized in bulk at 130 °C using stannous octoate as the coordination–insertion initiator. The terpolymer, poly(LL‐ran‐CL‐ran‐G), has been characterized by a combination of analytical techniques: GPC, ¹H NMR, ¹³C NMR, DSC and TG. Molecular weight characterization by GPC shows a unimodal molecular weight distribution with values of M _n = 1.01 × 10⁵ g mol^?1 and M _w / M _n = 2.17. Compositional and microstructural analysis by ¹H NMR and ¹³C NMR, respectively, reveal a terpolymer composition of LL:CL:G = 74:15:11 (mol%) with a chain microstructure consistent with random monomer sequencing. This latter view is supported by the terpolymer temperature transitions (T_g and T_m) from DSC and the thermal decomposition profile from TG. The results and, in particular, the conclusion that it is a random rather than a statistical terpolymer are discussed in the light of current theories regarding the mechanism of this type of polymerization. © 2001 Society of Chemical Industry     

New fluorine‐containing bissalicylidenimine–titanium complexes for olefin polymerization

Three new titanium complexes bearing salicylidenimine ligands—bis[(salicylidene)‐2,3,5,6‐tetrafluoroanilinato]titanium(IV) dichloride ( 1 ), bis[(3,5‐di‐tert‐butylsalicylidene)‐2,3,5,6‐tetrafluoroanilinato]titanium(IV) dichloride ( 2 ), and bis[(3,5‐di‐tert‐butylsalicylidene)‐4‐trifluoromethyl‐2,3,5,6‐tetrafluoroanilinato]titanium(IV) dichloride ( 3 )—were synthesized. The catalytic activities of 1 – 3 for ethylene polymerization were studied with poly(methylaluminoxane) (MAO) as a cocatalyst. Complex 1 was inactive in ethylene polymerization. Complex 2 at a molar ratio of cocatalyst to pre catalyst of Al_MAO/Ti = 400–1600 showed very high activity in ethylene polymerization comparable to that of the most efficient metallocene complexes and titanium compounds with phenoxy imine and indolide imine chelating ligands. It gave linear high‐molecular‐weight polyethylene [weight‐average molecular weight (M_w) ≥ 1,700,000. weight‐average molecular weight/number‐average molecular weight (M_w/M_n) = 4–5] with a melting point of 142°C. The ability of the 2 /MAO system to copolymerize ethylene with hexene‐1 in toluene was analyzed. No measurable incorporation of the comonomer was observed at 1:1 and 2:1 hexene‐1/ethylene molar ratios. However, the addition of hexene‐1 had a considerable stabilizing effect on the ethylene consumption rate and lowered the melting point of the resultant polymer to 132°C. The 2 /MAO system exhibited low activity for propylene polymerization in a medium of the liquid monomer. The polymer that formed was high‐molecular‐weight atactic polypropylene (M_w ～ 870,000, M_w/M_n = 9–10) showing elastomeric behavior. The activity of 3 /MAO in ethylene polymerization was approximately 70 times lower than that of the 2 /MAO system. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 95: 1040–1049, 2005     

Synthesis of poly(propylene carbonate) from highly active,inexpensive achiral (Salph)Co(III)X as initiator and bis(triphenyl phosphine) iminium as co‐initiator

Copolymerization of carbon dioxide with racemic propylene oxide has been investigated in the presence of an inexpensive achiral (Salph)Co(III)X [Salph is N,N′‐bis(3,5‐di‐tert‐butylsalicylidene) phenylenediimine and X is pentaflorobenzoate] as initiator and [PPN]⁺Cl^? ([PPN] is bis(triphenylphosphine) iminium) as co‐initiator. Effects of monomer‐to‐initiator ratio, initiator/co‐initiator ratio, and reaction conditions like stirring rate, temperature, and pressure of CO₂ on the molecular weight, yield, and selectivity of poly(propylene carbonate) over propylene carbonate have been studied. The initiator used in the study has been found to be highly active at milder conditions of pressure and temperature, giving a product with maximum M_w of 14.8 × 10³ g/mol at 25 bar and 50°C. The conversion increases with an increase in stirring rate and then becomes almost constant at 1100 rpm and above, indicating that the reaction is no longer limited by mass transfer. The molecular weight M_w of the polymer has been found to increase with increasing monomer‐to‐initiator ratio up to 3000:1, but it starts decreasing with a further increase in monomer‐to‐initiator ratio, giving a polymer of lower M_w. The activity of the initiator is considerably affected by pressure, temperature, time, and amount of co‐initiator. The polymeric product has low polydispersity (near unity) with negligible formation of polypropylene oxide. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43099.     

Synthesis and biological activity of medium range molecular weight polymers containing exo‐3,6‐epoxy‐1,2,3,6‐tetrahydrophthalimidocaproic acid

A new monomer, exo‐3,6‐epoxy‐1,2,3,6‐tetrahydrophthalimidocaproic acid (ETCA), was prepared by reaction of maleimidocaproic acid and furan. The homopolymer of ETCA and its copolymers with acrylic acid (AA) or with vinyl acetate (VAc) were obtained by photopolymerizations using 2,2‐dimethoxy‐2‐phenylacetophenone as an initiator at 25 °C. The synthesized ETCA and its polymers were identified by FTIR, ¹H NMR and ¹³C NMR spectroscopies. The apparent average molecular weights and polydispersity indices determined by gel permeation chromatography (GPC) were as follows: M_n = 9600 g mol^?1, M_w = 9800 g mol^?1, M_w/M_n = 1.1 for poly(ETCA); M_n = 14 300 g mol^?1, M_w = 16 200 g mol^?1, M_w/M_n = 1.2 for poly(ETCA‐co‐AA); M_n = 17 900 g mol^?1, M_w = 18 300 g mol^?1, M_w/M_n = 1.1 for poly(ETCA‐co‐VAc). The in vitro cytotoxicity of the synthesized compounds against mouse mammary carcinoma and human histiocytic lymphoma cancer cell lines decreased in the following order: 5‐fluorouracil (5‐FU) ≥ ETCA > polymers. The in vivo antitumour activity of the polymers against Balb/C mice bearing sarcoma 180 tumour cells was greater than that of 5‐FU at all doses tested. © 2001 Society of Chemical Industry     

The synthesis of high molecular weight polybutene‐1 catalyzed by Cp★ Ti(OBz)3/MAO

A new stereoregular polybutene‐1 was synthesized with a novel catalyst precursor η⁵‐pentamethyl cyclopentadienyl titanium tribenzyloxide (CpTi(OBz)₃) and methylaluminoxane (MAO). The effects of polymerization conditions on the catalytic activity, molecular weight and stereoregularity of the products were investigated in detail. It was found the catalyst exhibited highest activity of 91.2 kgPB mol Ti⁻¹ h⁻¹ at T = 30 °C, Al/Ti = 200. The catalytic activity and molecular weight were sensitive to the Al/Ti (mole/mole), polymerization temperature; they also depended on the Ti concentration. The molecular weight of the products increased with decreasing temperature. The structure and properties of the polybutene‐1 were characterized by ¹³C NMR, GPC, DSC and WAXD. The result showed the microstructure of polybutene‐1 extracted by boiling heptane was stereoregular, whereas the ether‐soluble fraction was atactic. The molecular weight of polybutene‐1 was over one million g mol⁻¹ and its molecular weight distribution ( M _w/ M _n) was from 1.1 to 1.2. © 2001 Society of Chemical Industry     

Highly fluorinated poly(ether‐imide)s derived from 2,2′‐bis(3,4,5‐trifluorophenyl)‐4,4′‐diaminodiphenyl ether and aromatic dianhydrides

A new diamine, 2,2′‐bis(3,4,5‐trifluorophenyl)‐4,4′‐diaminodiphenyl ether (FPAPE) was synthesized through the Suzuki coupling reaction of 2,2′‐diiodo‐4,4′‐dinitrodiphenyl ether with 3,4,5‐trifluorophenylboronic acid to produce 2,2′‐bis(3,4,5‐trifluorophenyl)‐4,4′‐dinitrodiphenyl ether (FPNPE), followed by palladium‐catalyzed hydrazine reduction of FPNPE. FPAPE was then utilized to prepare a novel class of highly fluorinated all‐aromatic poly(ether‐imide)s. The chemical structure of the resulting polymers is well confirmed by infrared and nuclear magnetic resonance spectroscopic methods. Limiting viscosity numbers of the polymer solutions at 25 °C were measured through the extrapolation of the concentrations used to zero. M_n and M_w of these polymers were about 10 000 and 25 000 g mol^?1, respectively. The polymers showed a good film‐forming ability, and some characteristics of their thin films including color and flexibility were investigated qualitatively. An excellent solubility in polar organic solvents was observed. X‐ray diffraction measurements showed that the fluoro‐containing polymers have a nearly amorphous nature. The resulting polymers had T_g values higher than 340 °C and were thermally stable, with 10% weight loss temperatures being recorded above 550 °C. Based on the results obtained, FPAPE can be considered as a promising design to prepare the related high performance polymeric materials. Copyright © 2011 Society of Chemical Industry     

Cross‐Linked Fluorinated Poly(Aryl Ether) (C‐FPAE) Films: Preparation Strategy,Performance Study,and Low Dielectric Applications

The production of low dielectric materials that can be used in high temperature environments is the primary aim of this work. A cross‐linked structure is introduced into fluorinated poly(aryl ether) (named as FPAE) with high molecular weight (M_w, 140 000 g mol^?1) and linear molecular structure using nucleophilic substitution reaction at the ortho‐position of decafluorobiphenyl monomer units in the FPAE molecular chain. The curing temperature and curing time are optimized and the final conditions for the cross‐linking reaction in this study are determined to be 300 °C for 1 h. Moreover, the dielectric constant and dielectric loss of the C‐FPAE film respectively are 2.67 and 0.006 at 1000 Hz when 1 wt% of crosslinking agent is added, and the cross‐linked fluorinated poly(aryl ether) film shows excellent thermal stability (T_d(5%), 495 °C), dimensional stability, hydrophobic properties, and high storage modulus in high temperature environments. Such novel low dielectric material with excellent performances has important application value in the aerospace and the integrated electronics field.     

Polymerization of styrene using bis(β‐ketoamino)nickel(II)/methylaluminoxane catalytic systems

Styrene (St) was polymerized in toluene solution by using bis(β‐ketoamino)nickel(II) complex as the catalyst precursor and methylaluminoxane (MAO) as the cocatalyst. The polymerization conditions, such as Al : Ni ratio, monomer concentration, reaction temperature, and polymerization time, were studied in detail. Both of the bis(β‐ketoamino)nickel(II)/MAO catalytic systems exhibited higher activity for polymerization of styrene, and polymerization gave moderate molecular weight of polystyrene with relatively narrow molecular weight distribution (M_w/M_n < 1.6). The obtained polymer was confirmed to be atactic polystyrene by analyzing the stereo‐triad distributions mm, mr, and rr of aromatic carbon C¹ in NMR spectrum of the polymer. The mechanism of the polymerization was also discussed and a metal–carbon coordination mechanism was proposed. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007