Preparation of C60(O)n-ZnO nanocomposite under electric furnace and photocatalytic degradation of organic dyes

Zinc oxide (ZnO) nanoparticles were synthesized sonochemically by applying ultrasonic irradiation to a mixed aqueous-alcoholic solution of zinc nitrate with sodium hydroxide at room temperature. The morphology and optical properties of the ZnO nanoparticles were examined by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and UV-vis spectroscopy. The C60(O)n nanoparticles were synthesized by heating a mixture of C60 and 3-chloroperoxybenzoic acid in a benzene solvent under the reflux system. The heated C60(O)n-ZnO nanocomposite was synthesized in an electric furnace at 700 degrees C for two hours. The heated C60(O)n-ZnO nanocomposite was characterized by XRD, SEM, and TEM, and examined as a catalyst in the photocatalytic degradation of organic dyes by UV-vis spectroscopy. The photocatalytic effect of the heated C60(O)n-ZnO nanocomposite was evaluated by a comparison with that of unheated C60(O)n nanoparticles, heated C60(O)n nanoparticles, and unheated C60(O)n-ZnO in organic dyes, such as methylene blue (MB), methyl orange (MO), and rhodamine B (RhB) under ultraviolet light at 365 nm.     

Utilization of ZnO nanocones for the photocatalytic degradation of acridine orange

A facile aqueous solution process was used to synthesize well-crystalline ZnO nanocones at 60 degrees C by using zinc nitrate hexahydrate and sodium hydroxide. The morphological, structural and optical properties of the synthesized ZnO nanocones were investigated by using field emission scanning electron microscopy (FESEM) attached with energy dispersive spectroscopy (EDS), transmission electron microscopy (TEM) equipped with high-resolution (HRTEM), X-ray diffraction (XRD) pattern, Fourier transform infrared (FTIR) spectroscopy and UV-Vis. spectroscopy measurements. The structural and optical properties of the as-synthesized nanocones confirmed a pure and well crystalline product possessing wurtzite hexagonal phase. The as-synthesized ZnO nanocones were used as photocatalyst for the efficient photocatalytic degradation of acridine orange. The acridine orange was almost completely degraded within 105 minutes. This research demonstrates that the simply synthesized ZnO nanostructures could be efficient photocatalyst for the photocatalytic degradation of various organic dyes and chemicals.     

Synthesis of AgBr/ZnO nanocomposite with visible light-driven photocatalytic activity

AgBr/ZnO nanocomposite was synthesized via chemical precipitation from pure ZnO nanowires, AgNO₃, and NaBr. Inductively coupled plasma optical emission spectroscopy, X-ray diffraction, and high resolution transmission electron microscopy results confirmed the forming of AgBr/ZnO nanocomposite. High resolution transmission electron microscopy results of the as-synthesized AgBr/ZnO nanocomposite revealed that AgBr nanoparticles were attached to the surface of ZnO nanowires. UV-vis diffuse reflectance spectra of both pure ZnO and AgBr/ZnO nanocomposite displayed a band gap edge at about 350-380 nm. However, compared with pure ZnO, an additional broad tail from approximately 400 nm to 700 nm appeared in the UV-vis diffuse reflectance spectrum of AgBr/ZnO nanocomposite. The photocatalytic studies indicated that the as-synthesized AgBr/ZnO nanocomposite was a kind of promising photocatalyst in remediation of water polluted by some chemically stable azo dyes under visible light.     

Synthesis, characterization, and photocatalytic activities of titanate nanotubes surface-decorated by zinc oxide nanoparticles

Nanoscaled zinc oxide (ZnO) particles with different amounts are coated on titanate nanotubes (TNTs) by a facile chemical method at room temperature. The characterizations of XPS, TEM, XRD and UV-vis spectra confirm that pure hexagonal wurtzite ZnO nanoparticles with an average size of about 9nm are distributed on the surfaces of TNTs evenly and attached strongly. The photocatalytic activities of the ZnO-TNTs nanocomposite are superior to those of P25, ZnO, TNTs and ZnO-anatase TiO2 (TNP) nanocomposite in the oxidation of rhodamine B under UV light irradiation. A comparison of the photocatalytic activities between different catalysts is discussed. Furthermore, we also find that the ZnO-TNT nanocomposite shows very favorable recycle use potential, because they have a high sedimentation rate and their photocatalytic activity is only slightly decreased even after five times of repeated uses.     

High quality ZnO/CuO nanocomposites synthesized by microwave assisted reaction

Highly crystalline zinc oxide (ZnO) and ZnO/CuO nanocomposite powders have been synthesized by a facile microwave irradiation method. The resulting powders were characterized in terms of structural, optical and morphological properties by X-ray diffraction (XRD), room temperature photoluminescence (PL) spectroscopy and scanning electron microscopy (SEM), respectively. XRD patterns revealed the formation of ZnO/CuO nanocomposites with good crystalline quality. SEM images displayed the formation of hexagonal ZnO and flower shaped agglomeration of ZnO/CuO nano-flakes with uniform production. The strong UV emission peak observed at around 380 nm show enhanced intensity for ZnO/CuO nanocomposite. Compared to ZnO nanoparticles, ZnO/CuO composites exhibit good transparency with sharp absorbance edges. The simplicity of synthesis route coupled with better optical and PL emission properties propose the microwave synthesized ZnO/CuO nanocomposite powders a promising material for optoelectronic devices.     

Fabrication of ordered flower-like ZnO nanostructures by a microwave and ultrasonic combined technique and their enhanced photocatalytic activity

Ordered flower-like zinc oxide (ZnO) nanostructures were fabricated via a facile microwave and ultrasonic combined technique. The product was characterized by powder X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and selected area electron diffraction pattern (SAED). The flower-like ZnO nanostructures were assembled by a central petal and six symmetrical petals which grew radially from the center. The flower-like ZnO sample showed an enhanced photocatalytic performance compared with the ZnO microrods for the methylene blue (MB) degradation, which could be attributed to its special structure feature. Au/ZnO and Ag/ZnO nanocomposites were also synthesized and exhibited enhanced photocatalytic efficiency after decorating noble metal nanoparticles on the surface of flower-like ZnO nanostructures.     

Preparation of self-assembled zinc oxide nanoparticles multilayer films under ultrasonic irradiation

Zinc oxide nanoparticles were synthesized and self-assembled on the reactive surface of a glass slide functionalized with (3-mercaptopropyl)-trimethoxysilane under ultrasonic irradiation. The structure, morphology, and optical property of the zinc oxide nanoparticles were investigated by TEM, XRD, and UV-vis spectroscopy. The functionalized glass slide was soaked in an aqueous solution which dispersed zinc oxide nanoparticles under ultrasonic irradiation. Zinc oxide multilayer films grew up to several layers (up to 5 layers) depending on the immersion time. The self-assembled zinc oxide nanoparticles multilayer films were characterized using UV-vis spectroscopy and SEM. Ultrasonic irradiation was an efficient method to make multilayer films on the functionalized glass slide with zinc oxide nanoparticles.     

Green synthesis of the Ag/ZnO nanocomposite using Valeriana officinalis L. root extract: application as a reusable catalyst for the reduction of organic dyes in a very short time

A facile and green synthesis of the Ag/ZnO nanocomposite by extract of Valeriana officinalis L. root in the absence of any stabiliser or surfactant has been reported in this work. The green synthesised Ag/ZnO nanocomposite was characterised by Field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), energy dispersive X‐ray spectroscopy (EDS), elemental mapping, Fourier‐Transform infrared (FT‐IR), X‐ray diffraction analysis (XRD) and UV‐Vis spectroscopy. According to SEM and TEM images, the Ag and ZnO particles are spherical with diameters of less than 20 and 40–50 nm, respectively. The Ag NPs/ZnO nanocomposite proved to be an effective catalyst in the reduction of various dyes including methyl orange (MO), Congo red (CR) and methylene blue (MB) in the presence of NaBH₄ in aqueous media at ambient temperature. A maximum degradation (100%) of dyes was performed using Ag/ZnO nanocomposite. The extraordinary performance of the prepared Ag/ZnO nanocomposite is attributed to the synergetic effect induced by both ZnO and Ag NPs in the catalytic degradation of organic dyes. The catalyst could be reused and recovered several times with no significant loss of catalytic activity.Inspec keywords: nanocomposites, silver, zinc compounds, II‐VI semiconductors, nanofabrication, catalysts, reduction (chemical), field emission electron microscopy, scanning electron microscopy, transmission electron microscopy, Fourier transform infrared spectra, ultraviolet spectra, visible spectra, X‐ray diffraction, surface morphology, nanoparticles, dyesOther keywords: green synthesis, nanocomposite, Valeriana officinalis L. root extract, reusable catalyst, reduction, organic dyes, surfactant, field emission scanning electron microscopy, transmission electron microscopy, energy dispersive X‐ray spectroscopy, elemental mapping, Fourier‐transform infrared spectroscopy, X‐ray diffraction analysis, surface morphology, nanoparticles, methyl orange, congo red, methylene blue, UV–Vis spectroscopy, size 40 nm to 50 nm, wavelength 493 nm, wavelength 465 nm, wavelength 663 nm, Ag‐ZnO     

不同合成过程对溶胶-凝胶法制备的ZnO/Ag纳米复合材料光催化性能的影响

以乙酸锌、硝酸银为前驱体,二乙醇胺作为稳定剂,利用溶胶-凝胶法分别采用一步法和两步法制备得到ZnO以及ZnO/Ag纳米复合粉体。所有ZnO/Ag复合物中Ag的含量均为3%(摩尔分数)。对所制备样品的结构和光学性质通过XRD、SEM、TEM、XPS、PL、UV-vis进行了表征,进而以甲基橙为模拟污染物进行了光催化测试。结果表明,不同方法制备得到的ZnO/Ag纳米粉体晶粒均匀,无明显团聚现象,面心立方结构的金属Ag吸附在纤锌矿结构的ZnO表面形成异质结。与纯ZnO相比,掺Ag极大地改善了样品在紫外光下的光催化活性。对不同合成工艺的比较表明,用溶胶-凝胶一步法制备的ZnO/Ag复合物的光催化活性最高,经紫外光照射70min可完全降解甲基橙。     

Facile fabrication of functionalized graphene sheets (FGS)/ZnO nanocomposites with photocatalytic property

Functionalized graphene sheets (FGS)/ZnO nanocomposites were fabricated via thermal treatment method, using graphene oxide as a precursor of graphene, Zn(NH(3))(4)CO(3) as a precursor of zinc oxide, and poly(vinyl pyrrolidone) as an intermediate to combine zinc with carbon materials. Thermogravimetric analysis, X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, transmission electron microscopy (TEM), and scanning electron microscopy (SEM) were used to characterize crystal structure and morphology of FGS/ZnO nanocomposites. It was shown that the well-dispersed ZnO nanoparticles were deposited on FGS homogeneously. The composites exhibited photocatalytic activity to decompose rhodamine 6G efficiently under low-power ultraviolet (UV) light. This facile and low-cost method makes the composite a perfect candidate in applications of catalysis and other areas.     

Transparent poly(methyl methacrylate)/ZnO nanocomposites based on KH570 surface modified ZnO quantum dots

Transparent luminescent ZnO embedded PMMA polymer has been synthesized by means of grafting poly(methyl methacrylate) (PMMA) onto the surface of ZnO QDs after g-methacryloxypropyl trimethoxy silane (KH570) modification. The resulting ZnO/PMMA nanocomposites with KH570-modified nanoparticles have better dispersibility and preserve the superior luminescence of ZnO nanoparticles in the nanocomposites. The obtained PMMA/ZnO nanocomposite films show high transparency, high UV-shielding efficiency and improved thermal stability. The obtained nanocomposite was characterized by Fourier transform infrared spectroscopy (FT-IR), transmission electron microscope (TEM), X-ray powder diffraction (XRD), thermogravimetry (TG), ultraviolet-visible (UV-vis) absorption spectroscopy.     

Preparation of a high-activity ZnO/TiO2 photocatalyst via homogeneous hydrolysis method with low temperature crystallization

The nano-scale ZnO/TiO₂ coupled oxide photocatalyst was successfully synthesized by a two-step method, the homogeneous hydrolysis and low temperature crystallization. The resultant photocatalyst was characterized by ultraviolet-visible absorption spectroscopy (UV-vis), X-ray diffraction (XRD), transmission electron microscopy (TEM), and Brunauer-Emmett-Teller (BET) techniques. The photocatalytic activity of coupled oxides was also evaluated by the degradation of methyl orange (MO) as a model compound. The experimental results showed that the prepared ZnO/TiO₂ at low hydrothermal crystallization temperature exhibited higher photocatalytic activity for the decomposition of MO than either pure phase ZnO or anatase TiO₂, and even higher than that of the Degussa P25 TiO₂.     

Preparation and characterization of vanadium-doped ZnO nanoparticles for environmental application

Vanadium-doped ZnO nanoparticles (ZnO:V) were prepared via flame spray pyrolysis (FSP) from a mixed aqueous solution of zinc hydroxide and vanadyl (IV) acetylacetonate. The morphological, structural and optical properties of the ZnO:V photocatalyst were characterized via transmission electron microscopy (TEM), X-ray powder diffraction (XRD), and UV-visible diffused reflection spectrum (DRS). The photocatalytic activity of ZnO:V was evaluated via photocatalytic degradation of methylene blue (MB). The results showed that the hexagonal wurtzite-structured ZnO:V nanoparticles were successfully synthesized via FSP. The morphology of the as-prepared nanoparticles was polyhedral and non-hollow. The average diameter of ZnO:V, which was calculated from BET result, was 11.7 nm when the molar ratio of V/Zn was 0.1. The maximum decomposition of MB by the ZnO:V nanoparticles was 99.4% after 180 min under UV irradiation, whereas the decomposition of MB by the pure ZnO nanoparticles was 96.6%.     

Preparation of ZnO nanoparticles by thermal decomposition of zinc alginate

A new method to produce zinc oxide nanocrystals is presented. The method is based on the thermal decomposition of zinc alginate gels. The gels were produced in the form of beads by ionic gelation between a zinc solution and sodium alginate. The wet beads were heated at 800 and 450 °C for 24 h and the products were characterized by X-ray diffraction (XRD), Scanning Electron Microscopy (SEM) and Transmission electron microscopy (TEM) and micro-Raman spectroscopy. XRD analysis showed that all obtained samples are of wurtzite structure. TEM analysis combined with electron diffraction also showed the presence of single crystals indexed as ZnO hexagonal phase. Crystal size was determined by measuring individual crystals from SEM pictures. It was found that heating temperature and the kind of zinc agent influence the crystal size. Raman scattering revealed the existence of defects in the structure of nanoparticles whose cringing was discussed in the context of recent studies in this field.     

Organic-inorganic nanocomposites of methylcellulose as a precursor of nanocrystalline ZnO layers

In this article, we present a sol-gel method to synthesize hybrid nanocomposite films of Zinc oxide (ZnO)/methylcellulose (MC) on microscope glass slides. The zinc/MC solutions were prepared, using different weight ratios of zinc acetate dihydrate to MC, in the presence of acetic acid. Fourier transform infrared spectroscopy (FTIR) investigation of the Zn sol/MC mixture showed coordinating interaction between zinc ions and MC. Thermal gravimetry analysis (TGA) results showed rapid decomposition of organic compounds in the composites at the temperature range of 200-450 degrees C. The UV-Vis spectroscopy was also utilized to identify ZnO nanoparticles in the MC matrix. The generation of ZnO nanoparticles in the MC matrix was then observed to proceed in situ through the annealing of the gel phase at 200 degrees C. Nanocrystalline films of ZnO/MC were subsequently obtained by the calcinations of ZnO/MC nanocomposites at 550 degrees C. The nanocomposite films were transparent in the visible light and showed a higher energy absorption edge compared with the bulk ZnO. Nanocrystallite sizes of ZnO particles were estimated from scanning electron microscopy (SEM) and the X-ray diffraction (XRD) investigations.     

Shape-dependent photocatalytic activities of bismuth subcarbonate nanostructures

Different shaped bismuth subcarbonate ((BiO)2CO3) nanostructures including irregular nanoplates, relatively uniform nanoplates and nanocubes were prepared and characterized by powder X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), UV-vis diffuse reflection spectroscopy (DRS) and nitrogen adsorption. The photocatalytic performance of the as-synthesized (BiO)2CO3 nanostructures on the degradation of Rhodamine B (RhB), methyl orange (MO) and methyl blue (MB) were evaluated under UV-vis light irradiation (modeling sunlight). The photocatalysis tests showed that all the different (BiO)2CO3 nanostructures displayed enhanced photodegradation performance compared with commercial (BiO)2CO3. The irregular (BiO)2CO3 nanoplates exhibited the highest photocatalytic activity on the degradation of different organic dyes. (BiO)2CO3 nanosturctures exhibited the different capacity to bleach the three organic dyes, which might be attributed to their different molecular structures. This work may provide a potential photocatalyst for the environmental pollutants treatments.     

Presence of intrinsic defects and transition from diamagnetic to ferromagnetic state in Co<Superscript>2+</Superscript> ions doped ZnO nanoparticles

In this paper, we report the structural, morphological and magnetic properties of pure and Co²⁺ doped ZnO nanoparticles synthesized using sol–gel auto combustion method. The prepared nanoparticles were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), selected area diffraction pattern (SAED), Fourier transform infrared spectroscopy (FTIR) and photoluminescence spectroscopy. The analysis of XRD pattern shows the single phase nature with a hexagonal wurtzite structure for the prepared nanoparticles. The average crystallite sizes of the prepared nanoparticles were found in the range 18–19 nm. SEM images showed that pure and Co²⁺ doped nanoparticles have different morphology. The shape of the prepared nanoparticles is approximately hexagonal shown by TEM image. SAED pattern also confirms the wurtzite structure with single crystalline nature. FTIR spectra showed the characteristic vibrations frequency band of Zn–O. Photo luminescence spectrum showed that two emission peaks, which are ascribed to near band edge transitions and broadened intensive green emission associated with oxygen-vacancy defects. The magnetic properties were measured by vibrating sample magnetometer (VSM) and superconducting quantum interference device with field dependant magnetization at 300 K and temperature dependant magnetization from 0 to 300 K. From VSM analysis, pure ZnO nanoparticles show diamagnetic behavior while Co²⁺ doped ZnO nanoparticles revealed ferromagnetic behaviour at room temperature. The significant changes in M–H loop from diamagnetic behavior to ferromagnetic behavior are due to the intrinsic defects such as oxygen vacancies (Vo) and zinc vacancies (Vz_n). The RTFM has been presented in terms of vacancies in the frame of bound magnetic polaron model.     

Green synthesis of zinc oxide nanoparticles using tomato (Lycopersicon esculentum) extract and its photovoltaic application

With an increasing awareness of green and clean energy, zinc oxide-based solar cells were found to be suitable candidates for cost-effective and environmentally friendly energy conversion devices. In this paper, we have reported the green synthesis of zinc oxide nanoparticles (ZnONPs) by thermal method and under microwave irradiation using the aqueous extract of tomatoes as non-toxic and ecofriendly reducing material. The synthesised ZnONPs were characterised by UV–visible spectroscopy (UV–vis), infra-red spectroscopy, particle size analyser, scanning electron microscopy (SEM), atomic force microscopy (AFM) and X-ray diffraction study (XRD). A series of ZnO nanocomposites with titanium dioxide nanoparticles (TiO₂) and graphene oxide (GO) were prepared for photovoltaic application. Structural and morphological studies of these nanocomposites were carried out using UV–vis, SEM, XRD and AFM. The current–voltage measurements of the nanocomposites demonstrated enhanced power conversion efficiency of 6.18% in case of ZnO/GO/ TiO₂ nanocomposite.     

Synthesis and study of the structure,magnetic, optical and methane gas sensing properties of cobalt doped zinc oxide microstructures

Undoped and Cobalt (Co) doped zinc oxide (ZnO & CZx) nanoparticles were synthesized by Solvothermal method. The samples were studied by X-Ray Diffraction (XRD), Energy Dispersive X-ray Spectroscopy (EDS), Inductively Coupled Plasma Atomic Emission Spectroscopy (ICP-AES), UV–Vis spectroscopy and Scanning and Transmission Electron Microscopy (SEM & TEM). Moreover the gas sensing properties of the nanoparticles for methane gas took place. Purity of the samples and Co concentration was investigated by EDS and ICP spectroscopy respectively. XRD results described the hexagonal wurtzite structure for all the samples in which crystallinity and the crystallites size decreased with increase of Co doping level. Using UV–Vis spectroscopy the band gap energy was evaluated and redshift of band gap energy was observed by increasing of Co concentration. SEM images demonstrated that nanoparticles were agglomerated with increase of Co doping level. TEM images revealed the nanoparticles size in the range 11–44 nm. Methane sensing properties was enhanced after Co doping of the ZnO nanoparticles for Co concentration up to 4%.     

Electrical and optical studies in polyaniline nanofibre–SnO2 nanocomposites

Polyaniline nanofibre–tin oxide (PAni-SnO₂) nanocomposites are synthesized and mixed with polyvinyl alcohol (PVA) as stabilizer to cast free-standing films. Composite films are characterized by X-ray diffraction studies (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), photoluminescence spectroscopy (PL) and UV-visible spectroscopy. XRD confirms the formation of PAni nanofibre–SnO₂ nanocomposite. From TEM images, diameter of the polyaniline nanofibre and SnO₂ nanoparticles in the PAni-SnO₂ nanocomposite are found to be 20–60 nm. SEM results show fibrous morphology of the PAni nanofibre and spherical morphology of polyaniline-SnO₂ composites. The nanocomposites exhibit high relative photoluminescence intensity in violet as well as green–yellow region of visible spectrum. From electrical conductivity measurement, it is confirmed that PAni nanofibre–SnO₂ nanocomposite follows Mott’s one-dimensional variable range hopping (VRH) model.