Race, life style and renal disease in South Africa

PURPOSE: Clinical evaluation of repairing old amalgam restorations using composite inlays cemented with two different bonding agents. MATERIALS AND METHODS: Occluso-proximal Class II inlay cavities were prepared in 50 old defective amalgam restorations. Extra oral system (EOS) composite inlays were cemented with two different bonding agents (All-Bond 2 or Geristore). After final finishing and polishing of each restoration, evaluation was carried out at baseline, 6 months, 12 months, and 24 months using US Public Health Service criteria. The data were collected and statistically analyzed using Chi-square test. RESULTS: No significant difference was found between the two bonding materials at any time interval.     

Hematological changes in infectious diseases. Hematological consequences of bacterial, protozoal and spirochetal infections (2)

Thirty-six Class V amalgam restorations were placed in 29 patients. Prior to insertion of the amalgam in 12 cavities the walls were treated with Amalgam Liner and in another 12 cavities with Copalite. The remaining 12 cavities were not treated before amalgam insertion. The margin quality was determined quantitatively with the SEM using replicas obtained immediately after the polishing of the restorations and 6 months later. At baseline the cavities treated with Copalite showed a margin quality identical to the untreated cavities. Cavities treated with Amalgam Liner showed an inferior margin quality. After 6 months the margin quality of the three groups showed no statistical differences. With neither of the liners tested was it possible to improve the margin quality of amalgam restorations.     

Criteria for restoration replacement and restoration life-span estimates in an educational environment

The present survey assessed the subjective estimates of restoration longevity, the relative importance of the reasons to replace a restoration and the proportion of restorative treatment perceived to be carried out to replace previous restorations in a clinical setting where caries experience has been reported to be high. Three hundred and eight-four final-year dental students in Mexico City (64% female, mean age 23.2 years) made subjective longevity estimates (minimum acceptable, 'average' and ideal) for small and large amalgam restorations and cast restorations. Students attributed greater responsibility for restoration failure to patient-related factors than to dentist-related factors. The most important reasons given for the replacement of restorations were the presence of an active carious lesion and the presence of a lesion. The next most important reasons were the presence of fractured restorations, proximal overhangs or proximal marginal defects, and marginal defects. No marked differences could be detected in the restoration longevity appraisals compared either with other subjective estimations or to actual longevity figures, nor in the relative ranking of reasons to replace restorations between the estimates done by participants in this study and reports originating in low-caries settings.     

Effect of topical timolol on tissue circulation in optic nerve head

OBJECTIVE: The aim of the present study was to determine whether removal of all amalgam restorations might significantly affect mercury levels in plasma and urine and whether the use of rubber dams might reduce patient exposure to mercury during amalgam removal. METHODS: All amalgam restorations were removed from 18 subjects during a single treatment session in which a rubber dam was used and from 10 subjects when a rubber dam was not used. All amalgam restorations were removed by the same dentist using high-speed cutting, water coolant, and high-volume evacuation. The levels of mercury in plasma and urine were analyzed both before and during the subsequent twelve months after amalgam removal. In order to determine whether removal of all amalgam restorations might cause an exposure large enough to significantly increase the mercury levels in two indicator media for mercury exposure, i.e., plasma and urine, and to determine if the removal might cause a significant decrease in the mercury levels found over time, the one-tailed, paired Students' t-test was used. For each individual, the pre-removal levels were compared with both the levels found in plasma on d 1 and in urine on d 10, and also with the levels found 1 y after removal. Furthermore, in order to examine whether the use of rubber dams had any effect on the mercury levels found after removal, the changes in the mercury levels found were compared between the groups using the Wilcoxon-Mann-Whitney rank sum test. RESULTS: After removal of all amalgam restorations, only the non-rubber dam group showed significant increases in the mercury levels found in plasma (p = 0.012) and urine (p = 0.037). However, one year later, the mercury levels in plasma and urine had sunk significantly below the pre-removal levels for both groups. When the changes in the mercury levels found were compared between the groups, the non-rubber dam group showed a significantly higher increase of mercury in plasma than the rubber dam group the day after removal (p = 0.0010). Compared to the pre-removal mercury levels in plasma and urine, the levels found 1 y after removal of all amalgam restorations were on average 52 +/- 23% (range 4-89%) lower in plasma and 76 +/- 21% (range 20-94%) lower in urine. SIGNIFICANCE: The study showed that dental amalgam had a statistically significant impact on the mercury levels found in plasma and urine in the patients tested, and that the use of a rubber dam during removal of all amalgam restorations significantly reduced the peak of mercury in plasma following removal.     

The future of dental amalgam: a review of the literature. Part 2: Mercury exposure in dental practice

This is the second article in a series of seven on the future of dental amalgam. It describes the means of exposure to mercury which can occur in dental surgeries from the storage of mercury, preparation and placement of dental amalgam restorations, polishing dental amalgam restorations, the removal of amalgam fillings and the storage of waste amalgam. It also reports on the monitoring of dental practices and studies on the mercury air levels in dental surgeries and blood and urine levels in dentists and their staff. Also, studies which compare these levels with the health and neurobehaviour of dentists and their staff are included. In addition, it discusses post-mortem studies of the mercury levels in body organs in dentists and controls. It then recommends methods for the safe handling of mercury and dental amalgam. Finally, it discusses the issues surrounding the release of mercury into the environment from dental practices and industry.     

Mercury and dental amalgam fillings

During 1993-95 a total of 169 patients (112 women, 57 men) with a wide range of complaints associated with earlier or present amalgam fillings were seen by the "Dental Biomaterials Adverse Reaction Unit" in Norway. Most patients had amalgam fillings; 19 had removed all amalgam, and 14 were in the process of replacing the amalgam fillings with other materials. Predominant symptoms were of a subjective and general nature (96% of the patients). Muscle and joint pain, headache, dizziness and feeling exhausted comprised the most common symptoms. Intra-oral pathology was observed in 48%. There was a correlation between the amount of amalgam ("amalgam score") and urinary mercury. Those without amalgam fillings and significantly lower values (median = 1.6 micrograms mercury/g creatinine) than those with amalgam fillings (medians: with amalgam = 3.5 micrograms/g; with partial removal of amalgam = 2.7 micrograms/g). Overall, in the present group of patients, no statistically significant correlation seemed to exist between the type and number of subjective symptoms or objective findings and the urinary mercury. This would indicate therefore that there is no straightforward association between urinary mercury and symptoms in the present group of patients.     

New England eye care survey

Amalgambond Plus with a high-performance additive was evaluated for its ability to bond a resin composite or an amalgam alloy to deep dentin in primary teeth with nonretentive cavity preparations. The clinical performance of amalgam and resin composite mesio-occlusodistal restorations bonded with Amalgambond Plus was evaluated at 15 months and 2 and 3 years. There was no statistically significant difference in the retention, marginal adaptation, secondary caries, and post-operative sensitivity over the times of the evaluation or between amalgam and resin composite restorations. After 3 years, most of the teeth were extracted because it was their exfoliation time, and 29 restorations limited within buccal and lingual cusps were evaluated for marginal leakage. There were no significant differences in microleakage between amalgam and resin composite restorations lined with Amalgambond Plus. Amalgambond Plus has the potential for serving successfully as a cavity liner with either amalgam or resin composite restorations.     

A new thromboxane receptor antagonist, Z-335, ameliorates experimental thrombosis without prolonging the rat tail bleeding time

In an in vitro study, the use of sealers and liners (Fuji varnish, Vitrabond, Vitremer, Paama 2, All-Bond 2, or Resinomer) significantly reduced the amount of marginal leakage around amalgam (Permite C or Lojic Plus) and gallium (Galloy) alloy restorations. This reduction in marginal leakage was produced by all sealers and liners tested, and there were no statistically significant differences between these materials. Unlined restorations of Permite C had significantly less marginal leakage than Galloy or Lojic Plus. Unlined Lojic Plus restorations had the greatest amount of marginal leakage. The experimental method used in the present study proved to be suitable for quantitative comparison of marginal leakage of different dental materials.     

Dental practitioners' experiences on the usefulness of restorative materials in Finland 1992-1996

OBJECTIVE: To analyse general dentists' choice of restorative materials in Finland, where the use of amalgam has significantly decreased and the use of composites increased during the past 10 years. DESIGN AND SETTING: Postal survey in 1997 to a random sample of general dental practitioners mainly working with adult patients. MAIN OUTCOME MEASURES: Percentage distribution of dentists' opinions. RESULTS: The response rate was 82%. Tooth-coloured restorations were considered to be more time consuming, technically complicated and to have shorter life spans. Most dentists were not willing to return to the wide-scale use of amalgam restorations. CONCLUSIONS: The rapid changes in the restorative material selection have not resulted in serious problems in restorative therapy.     

Replacements of restorations in the primary and young permanent dentition

The present study focused on the type of restorative material used and the reasons for replacements of restorations in the primary and the young permanent dentition. All patients with restorations and who were 8 and 19 years of age in 1995 and were regularly treated at 11 Public Dental Health clinics in J?nk?ping County, Sweden, participated in the study. Data were extracted from the records for all types of restorations in canines and molars for the preceeding of 5 years for the 8-year-olds (i.e. from 3 to 8 years of age; n = 546) and for approximal restorations in premolars and molars for the preceeding 13 years for the 19-year-olds (i.e. from 6 to 19 years of age; n = 606). In all, 6012 restorations were evaluated. The two most common restorative materials used in the primary dentition were compomer and glass ionomer cement and in the young permanent dentition composite and amalgam. In the primary dentition, 29% of the restorations had been replaced and 4% of the teeth with restorations had been extracted. Thus, 33% of the restorations in the primary dentition failed. The corresponding figure for the young permanent dentition was 13%. The most common reason for replacements in the permanent dentition was secondary caries. That restorations often fail because of caries and that the development of secondary caries is not prevented by replacement of an old restoration indicate that more attention should be paid to preventive dental care for patients with restorations in the primary as well as in the young permanent dentition.     

Influence of finishing time on marginal sealing ability of new generation composite bonding systems

Although variation in finishing techniques has been shown to affect microleakage, little research has been published on the influence of finishing time on the marginal sealing ability of new generation composite bonding systems. The objective of the present study was to evaluate the influence of finishing time on the enamel and dentine marginal sealing ability of four new generation composite systems. Two class V preparations, which were solely in enamel or dentine, were made on the buccal surfaces of 96 freshly extracted molar teeth. The teeth were randomly divided into four groups of 24 and restored with composite resin (Silux Plus) utilizing the following bonding systems: Scotchbond Multi-purpose, Fuji Bond LC, Prime & Bond 2.0 and Bisco One-step. Half of the restorations in each group were finished immediately after light polymerization and stored for 1 week. For the remaining restorations, finishing was delayed for 1 week. The storage medium was isotonic saline at 37 degrees C throughout the experiment. All restorations were then thermocycled, subjected to dye penetration testing, sectioned and scored. The results suggest that the finishing of composite restorations, bonded with the bonding systems evaluated, should be carried out immediately after light polymerization. Delayed finishing does not improve but instead can be detrimental to the marginal seal of the restorations. The effects of delayed finishing are, however, both bonding system and tissue specific.     

Electrochemical study of insulating properties of dental amalgam bonding polymers

The standard techniques used for amalgam restorations often result in a lack of adhesion to mineralized dental tissues. The bonding of amalgam with polymer has been suggested to improve its adaptation to dental tissues. Moreover the polymer involved in the bonding should inhibit the corrosion and the diffusion of metallic ions. The aim of this study was to evaluate in vitro the capacity of bonded amalgam to prevent ionic diffusion and migration. In this respect, an original method employing electrochemical techniques was used to determine the leakage current of bonded amalgam restorations. The electrochemical behaviour of conventional and bonded amalgam restorations was compared using a potentiostat driven by a computerized system (Voltamaster, Radiometer Analytical) with software for specific applications such as chronoamperometry or cyclic voltammetry. Samples of recently extracted teeth of young patients were first examined, and then the results were checked by other experimental assays using protected and unprotected copper sticks. The measurements obtained with chronoamperometry (E = +300 mV/SCE) in Ringer's solution at 37 degrees C showed that after polarization for 30 h the oxidation current decreased threefold for bonded samples (10 microA cm(-2)) as compared with the unprotected samples (35 microA cm(-2)). These results, as well as those obtained with the copper wires, demonstrated that even with two layers of adhesive the bonded joint is permeable to ions probably as a result of the hydrophylic properties of HEMA, a component of the adhesive. However, using five layers of adhesive reduced the ionic current by a factor as large as 10(6).     

Occupational exposure to mercury in dentistry and dentist mortality

In response to public concern, Health Canada recently conducted a review of amalgam safety and released a position statement entitled The Safety of Dental Amalgam. Essentially, the department has concluded that the levels of mercury absorbed by the body due to the release of mercury vapor from amalgam restorations, while detectable, do not approach those recognized to cause illness. It has therefore confirmed that amalgam restorations can be used safely in most patients, with some notable caveats. Despite Health Canada's position statement in support of amalgam, patient doubts about amalgam safety remain, including the tenuous hypothesized link between amalgam restorations and specific diseases. This article reviews the available studies of dentist mortality to identify possible links between mercury exposure and negative health effects. A lack of evidence to suggest a detrimental health outcome in dentists who are occupationally exposed to higher levels of mercury than their patients, and are known to have higher levels of mercury in their blood, provides an important reassurance concerning the safety of amalgam. The reviewed data indicates that the 10 leading causes of death in the United States and Canada are the same for both dentist and non dentist population groups, and that the percentage of deaths by the same cause are remarkably similar. By 1975, the year of the most recent U.S. study, the average age at death for white male dentists was about three years higher than for all adult white males. Although suicide standard mortality rates are known to be higher for dentists, suicide deaths have also been shown to be a factor in many other occupations, particularly those where there is easy access to drugs. Although updated actuarial data for dentist mortality are needed, the available data indicate no reduction in the life expectancy of practising dentists, nor any specific or disproportionate rates of disease associated with high mercury exposure. In fact, the available mortality studies are generally optimistic about the health of dentists, which should reassure patients about the safety of dental amalgam.     

The use of liners under amalgam restorations: an in vitro study on marginal leakage

OBJECTIVE: Marginal leakage of amalgam restorations may lead to secondary caries and pulpal damage. The purpose of this study was to determine the effect various cavity liners might have on microleakage. METHOD AND MATERIALS: Mesio-occlusodistal amalgam restorations with margins on enamel and dentin were treated with different liner materials (an adhesive system, a topical fluoride gel, a cavity varnish, and a glass-ionomer cement) in vitro. Following restoration, the teeth were submitted to thermocycling in a stained solution and sectioned to allow assessment of microleakage. RESULTS: On enamel, the control group (no liner) and the glass-ionomer-lined group had equivalent leakage scores and were superior to every other group. On dentin, only the glass-ionomer specimens had superior performance. The cavity varnish and fluoride-lined specimens exhibited the highest leakage scores. CONCLUSION: The use of liners does not reduce microleakage on amalgam restorations when the cavity margins remain on enamel. On dentin margins, a glass-ionomer liner can reduce microleakage.     

Historical development of whiteners: clinical safety and efficacy

Trimming composite restorations includes gross removal of excess material, contouring, and finishing. Many surfaces such as the lingual surface of anterior teeth or the occlusal surfaces of posterior teeth require the use of rigid rotating instruments. The purpose of our study was to assess the suitability of eight finishing diamonds, five tungsten carbide finishing burs, and one ceramically coated finishing instrument for trimming a small-particle hybrid composite material. A total of 70 specimens of Herculite XRV were treated with the different finishing instruments under simulated practice conditions, and surface roughness was recorded quantitatively using an optical laser pick-up. The resulting surfaces were examined qualitatively with the help of scanning electron microscopy (SEM). Cutting efficiency of the diamonds and burs was evaluated at a constant pressure of 2.5 N using 42 additional specimens of Herculite XRV. Significant differences were calculated using one-way ANOVA and pairwise contrasts by Tukey's multiple range test. The results showed that finishing diamonds were characterized by high cutting efficiency and relatively rough corresponding composite surfaces, whereas tungsten carbide finishing burs led to smooth composite surfaces but had little cutting efficiency. For gross removal and contouring of composite restorations, a 15-40 microns finishing diamond is recommended followed by a tungsten carbide bur for finishing the restoration.     

Benefits and disadvantages of tooth-coloured alternatives to amalgam

OBJECTIVES: To give the practising dentist scientifically based data to assist him/her in the responsible decision-making process necessary to weigh the options available to the patient if she/he prefers not to have an amalgam placed. DATA SOURCES: Based on the literature and on the research work, which was done in the author's department, the indications and limitations of the known alternatives of amalgam were formulated. DESCRIPTION OF ALTERNATIVES TO AMALGAM: With the exception of cast gold restorations, all alternatives require the strict use of adhesive techniques. When compared with similar amalgam restorations, placing composite restorations (if they are indicated) takes approximately 2.5 times longer because complex incremental techniques are needed. Despite all the efforts, direct composite restorations placed in large cavities still show unacceptable amounts of marginal openings. Tooth-coloured inlays are a better alternative for large restorations. These restorations must be inserted with adhesive techniques. With composite inlays it is difficult to achieve a composite-composite bond. Ceramic inlays may be micromechanically bonded to the luting composite. They all show clinically a good marginal behaviour and the use of ultrasonic energy may further simplify the application technique of aesthetic inlays. STUDY SELECTION: Papers describing the different techniques were used as a base for the corresponding chapter. To assess and compare the longevity of the different restoration types, literature data were used. We limited ourselves to papers reporting at least 5-year clinical data. Longitudinal, clinically controlled studies were preferred. However, to be more complete, retrospective, cross sectional studies were also included. LONGEVITY OF POSTERIOR RESTORATIONS: Amalgam shows excellent longevity data with studies up to 20 years. The average annual failure rate is 0.3-6.9%. Posterior composites are in the same range (0.5-6.6%), however, the study times are much shorter (max. 10 years). For tooth-coloured inlays much less data are available. Longevity is reported up to 6 years with annual failure rates of 0.6-5%. CONCLUSIONS: All aesthetic alternatives to amalgam require more complex procedures and more time. If cost benefit considerations are a concern, amalgam is still the most convenient restorative material for posterior teeth.     

Bonding of amalgam to composite: tensile strength and morphology study

OBJECTIVES: The present study was based on the premise that it may be possible to produce useful dental restorations by bonding freshly triturated amalgam to a cured composite restoration (Group 1 specimens), or by bonding uncured composite to hardened amalgam (Group 2 specimens). METHODS: To determine the validity of this premise, a phosphonate adhesive resin cement was used to produce simulated, layered dental restorations for each test group. RESULTS: The mean tensile bond strength of 24 hour-old Group 1 specimens (6.74 MPa +/- 1.63 MPa) was almost twice that of 24 hour-old Group 2 specimens. Cohesive failure of the amalgam-substrate layer was a prominent feature of the fracture pattern of Group 1 specimens. On the other hand, rupture of all Group 2 specimens occurred mainly along the adhesive-amalgam interface. Findings from SEM examination of the layers of amalgam, adhesive cement, and resin composite of intact Group 1 specimens suggested that inclusions of adhesive resin cement may be the cause of the persistent cohesive failure of the amalgam layer. SIGNIFICANCE: It may be possible to improve the strength of bonded couples made from freshly triturated amalgam and cured resin composite by minimizing the thickness of the adhesive layer.     

Animal experimental studies on the thrombolytic effect of streptokinase

The purpose of this investigation was to explore the feasibility of enhancing the electrochemical stability of dental amalgam restorations by a process of "selective interfacial amalgamation." If dental amalgam restorations can be selectively alloyed at the tooth-amalgam interface, to a minor thickness as compared with the dimensions of the bulk amalgam, so as to present a more electrochemically stable phase than psi2 to the oral environment, corrosion will be reduced and desirable qualities of existing amalgams can be utilized. It was found that selective interfacial amalgamation was indeed possible and that it could be readily accomplished using a silver suspension as a cavity liner. By then placing a conventional silver-tin amalgam according to ordinary dental techniques, mercury expressed during hand condensing reacted with the silver in the liner resulting in the formation of an integral amalgam restoration with the more noble psi1 phase adjacent to tooth structure. In vitro corrosion tests of samples so prepared exhibited corrosion resistance far superior to unlined control samples.     

The epidemiology of Neisseria gonorrhoeae isolates in Greenland 1979-1990: the emergence, spread and disappearance of non-PPNG strains carrying the conjugative 38.9 kb plasmid

The aim of this study was to compare the clinical performance of an amalgam, a glass polyalkenoate (ionomer) cerment material and a resin-based composite material used in small Class II cavities in permanent teeth. All restorations were inserted under rubber dam. They were examined yearly for 3 years. One clinician continued the study up to 5 years. The clinical examination focused on two criteria: clinically acceptable and failure. In addition, impressions were taken of the prepared cavities immediately before restoration and at each clinical examination using an elastomeric material. The study comprised 274 Class II restorations (88 amalgams, 95 cerments and 91 resin composites) placed in 142 adolescent patients. One hundred and sixty-seven restorations were in molar and 107 in premolar teeth. Patient dropout after 5 years resulted in the loss of 161 restorations, evenly distributed for restorative material and type of tooth involved. Four amalgam restorations, 22 glass ionomer cerment and nine resin composite restorations failed. The glass ionomer cerment and amalgam restorations failed primarily due to bulk fractures, while the resin composite restorations failed due to secondary caries and bulk fractures.     

Advanced adhesive restorations: the post-amalgam age

Due to patient demand for biocompatible, safe, and tooth-colored restorations, the use of amalgam as a restorative material has been declining. Currently, the profession of operative dentistry is in a state of transition from the amalgam age to the post-amalgam age. The learning objective of this article is to discuss the current state of the art of tooth-colored restoratives--amalgam substitutes and amalgam alternatives--used either as direct or laboratory fabricated restorations nationally and internationally. Adhesive dentistry is discussed in detail, with tooth preparation as the key element. The challenges facing the clinician during the transition period include clinician education, restorative concepts and teaching competence, costs, prevention, and maintenance.