Flexible active‐matrix OLED displays: Challenges and progress

Abstract— Organic light‐emitting‐device (OLED) devices are very promising candidates for flexible‐display applications because of their organic thin‐film configuration and excellent optical and video performance. Recent progress of flexible‐OLED technologies for high‐performance full‐color active‐matrix OLED (AMOLED) displays will be presented and future challenges will be discussed. Specific focus is placed on technology components, including high‐efficiency phosphorescent OLED technology, substrates and backplanes for flexible displays, transparent compound cathode technology, conformal packaging, and the flexibility testing of these devices. Finally, the latest prototype in collaboration with LG. Phillips LCD, a flexible 4‐in. QVGA full‐color AMOLED built on amorphous‐silicon backplane, will be described.     

Passive‐matrix polymer light‐emitting displays

Abstract— Organic light‐emitting device research focuses on the use of small‐molecule and polymer materials to make organic electroluminescent displays, with both passive‐ and active‐matrix technologies. This paper will focus on the characteristics of red, green, and blue electroluminescent polymers suitable for fabricating monochrome and full‐color passive‐matrix displays. The stability of polymer OLEDs, and the use of ink‐jet printing for direct high‐resolution patterning of the light‐emitting polymers will also be discussed. It will be shown that the performance of light‐emitting polymers is at the brink of being acceptable for practical applications.     

Light‐emitting polymers for full‐color display applications

The latest developments in light‐emitting‐polymer (LEP) technology at CDT continue to show steady progress. Device performance for blue, green, and red systems as well as a high‐performance yellow system in terms of device efficiency and stability will be described. Some of the issues associated with the commercialization of LEP technology including the development of direct‐patterning techniques enabling full‐color passive‐ and active‐matrix display will be discussed.     

Design of large‐area OLED displays utilizing seamless tiled components

Abstract— In recent years, the majority of R&D for large‐area displays has been to serve the production of large monolithic substrate technology such as plasma‐display panels (PDPs) and TFT‐LCD. While the pursuit of large displays for domestic and light‐industrial use benefits from the production of these high‐quality high‐pixel‐count technologies, there is still a need to produce displays in formats other than 4:3 or 16:9 and on a larger scale than currently available in single‐substrate displays. The options that exist for producing tiled displays from emerging technologies is examined and a practical technique for creating large‐area (1.8 × 1.2 m and larger) monochrome or color displays from tiling smaller units is discussed. This presents a cost‐effective approach for arranging small tiles to create a much larger screen and offers a simple way to address the market gap between large monolithic displays and small conventional LED video‐wall displays, in the size range of 1–10‐mm pixels for advertising and industrial use. By examining the requirements for pixel size and pitch against the range of viewing distances commonly associated with the target markets for these displays, it will be shown that complex manufacturing is not always required.     

Studies on a LaF3‐coated MgO protecting layer in AC‐plasma‐display panels

A new protecting layer, a LaF₃‐coated MgO layer, in color AC‐plasma‐display panels (PDPs) was studied in order to overcome the weakness of the conventional single MgO protecting layer. The material characteristics of the new layer were examined by using variations in the deposition process. The display characteristics were also examined by implementing their processes to actual PDPs. It was demonstrated that this method is effective in lowering the firing and sustaining voltages of PDPs and enhancing the brightness of the panel as well.     

Competing display technologies for the best image performance

Abstract— Cathode‐ray tubes (CRTs) have been the dominant display technology for years, having the best image performance and low cost. During the last several years, flat‐panel‐display technologies, such as liquid‐crystal displays (LCDs), began to replace the CRT mainly because of its favorable form factor. Today, the image performance of LCDs are equal to that of a CRT, and attractive flat‐display products have become so affordable that they have replaced the CRT from its dominating market position and have obtained the largest market share. In the past, the CRT set the standards for digital imaging technologies, but today, modern image capturing, storage, transport, signal processing, and printing technologies have improved to such high levels that they demand better display technologies and standards. At present, the LCD is at the forefront of this display‐technology evolution. This paper will focus on the latest image‐quality improvements in LCD technology and briefly touch alternatives such as plasma‐display panels (PDP) and microdisplay projection. Special attention will be given to the latest developments in wide‐color‐gamut technologies and methods to reproduce accurate colors within a display device.     

Optical filters for plasma‐display panels using organic dyes and conductive mesh layers by using a roll‐to‐roll etching process

Abstract— Optical filters with a high shielding capability against electromagnetic (EM) radiation for plasma‐display panels (PDPs) have been studied. We developed optical filters with high conductivity by utilizing a copper‐mesh layer, which was processed by using roll‐to‐roll photolithography and roll‐to‐roll etching. The copper‐mesh layer has a cross‐striped pattern with a surface resistance of 0.05Ω/□ and an opening ratio of approximately 93%. In combination with the copper‐mesh layer, organic dyes were applied to reduce the PDPs unfavorable emissions, such as near‐infrared light, and to control the transmission properties to improve the PDPs picture quality.     

Review Paper: Multi‐primary‐color displays: The latest technologies and their benefits

Abstract— Multi‐primary‐color (MPC) display technology is one of the fastest emerging research areas in recent years. Wide‐color‐gamut display devices have been required for visually sufficient and/or accurate color reproduction. It is well known that MPC displays can reproduce accurate colors with high efficiency. In addition, not only the image‐quality improvement but some other performance of display devices is also required for display devices. This paper reviews achievements in MPC display technologies and focuses on the benefits of MPC displays: power‐savings and high resolution.     

Clamped‐inverter circuit architecture for luminescent‐period‐control driving of active‐matrix OLED displays

Abstract— An innovative pixel‐driving technology for high‐performance active‐matrix OLED flat‐panel displays is described. Called “clamped‐inverter circuit architecture,” it uses luminescent‐period‐control driving to reduce the inter‐pixel non‐uniformity caused by the device‐to‐device variability of low‐temperature poly‐Si TFTs. A prototype full‐color display shows a luminous deviation of less than 1.6%, which corresponds to only the LSB‐error in 6‐bit gray‐scale.     

The present and future of electronic paper

Abstract— With the rise of electrophoretic‐display media from several sources, the world is opening up for new uses of electronic displays. Where “immersive reading” used to be a task strictly reserved for paper, displays can now fulfill that role. Many challenges still remain, such as full‐color photograph‐like performance and video speeds. However, in view of recent accomplishments showing near‐video‐speed switching and potential for full color, after electrophoretic displays obtain a slice of the reading market, application of these developments will take us a significant step towards full‐color animated paper‐like displays. The developments that have led to the presence of electronic paper in the market today will be described, and developments that are about to happen will be discussed.     

ALIS method for high‐resolution color PDPs

This paper describes the Alternate Lighting of Surfaces (ALIS) method as a promising drive technology which can lead to high‐resolution plasma‐display panels (PDPs). This technology provides a resolution of more than 1000 scanning lines without lowering luminance, thus enabling the essential requirements of HDTV. Moreover, it allows the number of scanning electrodes to be halved in comparison with the conventional method, as well as the circuit scale to be minimized due to the use of the single scanning drive. The ALIS method is expected to be a key technology that will help PDPs penetrate the TV market.     

LCDs for TV applications

Abstract— Super IPS (S‐IPS) technology has intrinsic advantages in several aspects required for TV applications. Particularly, the wide‐viewing‐angle property and fast gray‐to‐gray response time of S‐IPS LCDs are both necessary requirements for family and individual use for LCD TVs. Given these benefits and other advantages S‐IPS provides, LG.Philips LCD has developed high‐performance S‐IPS LCDs for TV, which have now become competitive with plasma‐display panels (PDPs), in addition to other modes of LCD TVs as well as CRTs. This article will discuss why S‐IPS technology is the leading choice for LCD‐TV applications.     

Discharge characteristics and low‐voltage driving of high‐Xe‐content PDPs

Abstract— High‐Xe‐content PDPs attain improved luminous efficiency, but with sacrifices of higher sustain and address voltages and slower discharge build‐up. By examining PDPs with 3.5–100% Xe contents, it was revealed that space‐charge priming as well as wall‐charge accumulation are effective in obtaining low‐voltage and high‐speed operation. In addition, it was found that the effectiveness is emphasized for higher‐Xe‐pressure PDPs. In this respect, erase addressing is more favorable than write addressing, especially for high‐Xe‐pressure PDPs. The formative time lag of the discharge and diffusion/drift of the space charges are shorter for high Xe contents. In this respect, high‐Xe‐content PDPs have a potential for high‐speed addressing, if driven adequately. The use of space‐charge priming, however, is limited by the duration between the priming and scan pulses. Accumulation of wall charges is limited by ignition of a self‐erase discharge with which all the wall charges are dissipated. Although the highest efficiency and luminance are attained with a 100%‐Xe panel, the optimum Xe gas content, considering the sustain pulse voltage and drive voltage margin, would be 70% Xe + Ne.     

Advanced IPS technology for mobile applications

Abstract— In‐plane‐switching LCD (IPS‐LCD) technologies originally developed for LCD monitors and TV applications are applied to mobile applications. Advantages of the IPS mode over other optical modes for mobile applications are quantitatively clarified. The panel achieves stable color reproduction and chromaticity in the viewing‐angle range for mobile displays. Superiority of the IPS mode over other optical modes is discussed also from the viewpoints of stability in chromaticity during the brightness change and the driving power consumption. A transflective IPS mode with good performance is accomplished by the use of a proper optical design. A new structure, IPS‐Pro, which enables sunlight readability by increasing the transmittance, i.e., the brightness of the panel, without additional cost and power consumption in contrast to additional fabrication processes required to fabricate the transflective mode is realized. Furthermore, to improve the users' convenience, an automatic luminance control system and a controllable viewing‐angle device are developed. The panels developed fulfill the market requirements of increasing the function and performance variations and will be the most appropriate ones to be applied to mobile appliances, such as cellular phones, digital still cameras, music players, GPS, mobile TV sets, etc.     

Improved discharge characteristics using MgO single‐crystal particles and advanced CEL structure

Abstract— Pioneer Corporation introduced plasma‐display‐panel (PDP) TVs in 2005, which achieved the highest dark‐room contrast ratio of 4000:1 at the time. These PDPs had a novel discharge cell structure consisting of a crystal emissive layer (CEL) on a MgO protective thin film. This cell structure is refered to as a CEL structure. Magnesium‐oxide single‐crystal particles, which have a unique luminance peak around 230–250 nm and a good exo‐electron‐emission property, were found to be an excellent material for CEL and were utilized in CEL panels. In 2007, newly developed PDP TVs in which CEL was formed on a phosphor layer, in addition to the previous CEL structure, were introduced, and this discharge cell structure is refered to as advanced CEL structure. By using the new cell structure, the opposed discharge characteristics have been drastically improved, and a stable reset discharge has been realized with only a weak opposed discharge. As a result, black luminance has been drastically reduced, and a dark‐room contrast ratio of over 20,000:1, the highest ever reported, has been achieved.     

Front address structure for high luminous efficacy and low address voltage in ACPDPs

Abstract— 8‐in. AC plasma display panels with front address (FA) structures were developed. Deep barrier ribs, high‐Xe‐content gas, and long sustain gaps were applied to FA structures to achieve high luminous efficacy. The FA structures have several advantages over conventional structures. Because address electrodes are closer to sustain electrodes, FA PDPs can be driven at lower address voltages, under the condition of deep barrier ribs or high‐Xe‐content gas, than conventional PDPs. A disadvantage of FA PDPs is relatively high capacitance between the sustain electrodes and address electrodes compared to that of conventional PDPs.     

System design for a wide‐color‐gamut TV‐sized AMOLED display

Abstract— By using current technology, it is possible to design and fabricate performance‐competitive TV‐sized AMOLED displays. In this paper, the system design considerations are described that lead to the selection of the device architecture (including a stacked white OLED‐emitting unit), the backplane technology [an amorphous Si (a‐Si) backplane with compensation for TFT degradation], and module design (for long life and low cost). The resulting AMOLED displays will meet performance and lifetime requirements, and will be manufacturing cost‐competitive for TV applications. A high‐performance 14‐in. AMOLED display was fabricated by using an in‐line OLED deposition machine to demonstrate some of these approaches. The chosen OLED technologies are scalable to larger glass substrate sizes compatible with existing a‐Si backplane fabs.     

A new wettability‐control technique for fabricating color OLED panels by an ink‐jet‐printing method

Abstract— The fabrication technique for color OLED panels by means of wettability‐controllable hole‐injection material (HIM) and a photocatalytic lithography method achieves both precise ink‐jet printing and long‐lifetime devices. The technique enables us to selectively change the non‐wetting surface of a hole‐injection layer (HIL) of metal‐oxide nanoparticles (MONPs) into a wetting surface without damage to the device performance. Wetting patterns formed by this method with photocatalyst‐coated photomasks made it possible to print emission material with patterns of precisely 98‐μm widths on the hole‐injection layer. A fluorescent green‐emitting device fabricated with an HIM of MONPs by the photocatalytic treatment exhibited a long lifetime of 365 hours at30,000 cd/m², which can be extrapolated to a lifetime of more than 110,000 hours at 1000 cd/m², assuming an acceleration coefficient of 1.7. A two‐color device and a monochrome passive‐matrix panel were also successfully fabricated. The two‐color device emitted light without the mixing of colors. The monochrome panel displayed alphabetical characters with good uniformity and no flaws.     

Spatial gamut mapping algorithms for cross‐display color reproduction

Abstract— Owing to the fast developments of computer networks and color imaging technologies, there is a tendency towards remote proofing in the printing or textile industries. More cases such as cross‐display color matching will occur in the future information society. The problems of color mismatching we usually find in cross‐display devices have been widely discussed today. In this paper, to achieve equivalent color matching between a sRGB monitor and an Adobe RGB monitor, the spatial gamut mapping algorithm (SGMA), which introduces sigmoidal tone mapping, multi‐mapping paths, and unsharp mask (USM) operation into a sRGB color‐management system, is proposed. According to the designs of USM locations, this proposed SGMA can be further developed into pre‐USM, post‐USM, and double‐USM types. Besides, two critical image characteristics, edge map and color histogram, are investigated to establish the relationship between image content and SGMA. The psychophysical experimental results show that double‐USM SGMA obtains better color matching than the other spatial types.     

Analyzing and tuning emission characteristics of top‐emitting organic light‐emitting devices

Abstract— Top‐emitting organic light‐emitting devices (OLEDs) have several technical merits for application in active‐matrix OLED displays. Generally, stronger microcavity effects inherent with top‐emitting OLEDs, however, complicate the optimization of device efficiency and other viewing characteristics, such as color and viewing‐angle characteristics. In this paper, using the rigorous classical electromagnetic model based on oscillating electric dipoles embedded in layered structures, the emission characteristics of top‐emitting OLEDs as a function of device structures will be analyzed. From comprehensive analysis, trends in the dependence of ewmission characteristics on device structures were extracted, and, accordingly, a general methodology for optimizing viewing characteristics of top‐emitting OLEDs for display applications will be suggested. The effectiveness of the analysis and the methodology was confirmed by experimental results.