手持单元(HHU)应用的几点心得

手持单元在数控机床加工中应用非常普遍,尤其是由于结构原因选择了固定操纵台控制方式的,手持单元的作用就更加突出.     

基于EZ—USB芯片的通用USB控制器硬件设计方法

以Cypress公司的EZ-USB FX芯片为核心芯片,采用USB总线作为外设接口,开发了一个体积小,通用性强,扩展能力好的USB控制器.该控制器可以作为以PC工控机为核心的工控设备的手持控制器模块.     

冲击波测试系统的手持终端设计

由于冲击波测试中测试系统的工作状态难以监测、测试参数难以现场更改,而且传统测试系统大多以PC作为控制终端,在户外进行实验时存在着操作不便、不易携带的问题.为此,设计了基于RAM的新型冲击波测试系统的手持终端.利用Qt技术设计控制界面的应用程序,通过Wi-Fi无线控制测试系统,实现了测试系统的状态监测、数据的无线传输与波形显示的功能.此外,还设计了USB接口用于数据的有线读取,避免了数据丢失.手持终端在多次弹药试验得到了很好应用,具有良好的可靠性和稳定性.     

手持扫描仪式显微图象分析粒度计

一、前言目前国内外采用的各种颗粒系粒度测量仪器,主要是依据颗粒的物理、化学性质实现粒度测量。这些粒度计依据其工作原理可分为:显微镜法(即对颗粒平而投影的直接观测法),重力或离心力沉降法和分级法三类。其中历史最为悠久的显微镜法,具有两个重要的特点:(1)可以对颗粒系样本粒子逐个单独进行测量;(2)可对“粒径”进行直接几何量度。目前广泛应用于工业的许多粒度计并不具备这     

并联机床开放式数控系统

介绍了并联机床开放式数控系统的软件、硬件设计。     

手持GPS接收机定位精度的试验研究

精确定位信息是精细农业实践需要获取的重要信息之一,手持GPS以其体积小巧、携带方便、接口多等特点,已成为全天候实时定位导航的设备,通过对GPS315接收机做静态单点绝对定位和动态移动试验研究,分析了其动静态精度和误差原因,为我国在精细农业实践以及其他行业中正确合理使用手持GPS接收机提供了理论依据.     

UG软件在手持电动工具设计中的应用

1　手持电动工具的设计特点手持电动工具产品的设计具有以下特点 :①外形结构复杂。手持电动工具的外形表面大都由形状复杂的自由曲面构成。由于手持电动工具直接由人手持操作 ,因此对其人机工程性能提出了较高要求 ,设计时既要满足手感要求 ,又要考虑外形美观 ,还需根据不同客户的地域性差异、不同的手型大小等进行针对性设计。②性能要求高。我国生产的手持电动工具产品大部分出口销往北美、欧洲、日本等地 ,产品性能 (尤其是安全性能 )必须符合相关国际标准和出口地的质量标准。因此从产品设计到制造的每一环节均须严把质量关 ,成品出厂…     

组合式多功能手持砂带机

分析了现有的手持砂带机结构和使用情况，在现有手持砂带机结构的基础上进行了改进，设计制造了一种组合多功能手持砂带机，实现了一机多用。     

ANGULAR DISTORTION ALLOWABLE VALUE AND ASSESS METHOD OF WELD ON COKE TOWER

A graph as the new engineering method for estimate the safety of bulging deformation of coke tower is proposed. Through stresses analysis of circumferential weld of coke tower and comparing the stresses produced by pressure with heat stress of steady state, residual stress, bending stress produced by both itself weight and wind loads, it showed that the stresses produced by pressure on the angle distortion are the main factor of equivalent stress of the combined stress. After comparing four kinds of stress controlling conditions, the relation to stress with depth of angular distortion, grade of curvature of angular distortion and half of region of angular distortion has been inferred. Graph of deformation allowable value of coke tower for different condition by angular distortion and half of region of angular distortion has been plotted. The five steps for its engineering use have been explained. The lighter the grade of curvature is, the larger of bulge allowance, may be, and the bigger of depth of angular distortion may pose too. For the coke tower with a popular structure of Dg 5 400 mm×28 mm, the result by graph is nearly more than the result of two formulas formed by other research, the error is less than 7.0%. But, the graph can be easily applied to different size of angular distortion.     

DESIGN AND ANALYSIS OF NOVEL ACTIVE ACTUATOR TO CONTROL LOW FREQUENCY VIBRATIONS OF SHAFT SYSTEM

Aiming at providing with high-load capability in active vibration control of large-scale rotor system, a new type of active actuator to simultaneously reduce the dangers of low frequency flexural and torsional vibrations is designed. The actuator employs electro-hydraulic system and can provide a high and circumferential load. To initialize new research, the characteristics of various kinds of active actuators to control rotor shaft vibration are briefly introduced. The purpose of this paper is to introduce the preliminary results via presenting the structure, functions and operating principles, in particular, the working process of the electro-hydraulic system of the new actuator which includes a set of high speed electromagnetic valves and a series of sloping cone-shaped openings, and presenting the transmission relationships among the control parameters from control signals into the valves to active load onto shaft. The course of the work is dynamic, and a series of spatial forces and moments are put on the shaft to get an external resultant force to reduce excitations that induce vibration of shafts. By checking states of vibration, the actuator can control the impulse width and the interval of injection time for applying different control force to a vibration shaft in two circumference directions through the regulating action of a set of combination directional control valves. The results from simulating analysis and experiment show evidence of that this design can satisfy the case of active process of decreasing of flexural and torsional vibrations.     

Effects of prebuckling deformations on the elastic flexural-torsional buckling of laterally fixed arches

The effect of the prebuckling in-plane deformations on the elastic flexural-torsional buckling of laterally fixed circular arches is studied in this paper. The finite strains and the energy equation for the flexural-torsional buckling of arches have been derived based on an accurate orthogonal rotation matrix. A closed form solution for the elastic flexural-torsional buckling resistance of laterally fixed arches in uniform bending, including the effects of the prebuckling deformations, is obtained. It is found that the notion that the prebuckling deformations increase the flexural-torsional buckling moment of an arch or of a beam is not necessarily correct for a laterally fixed arch or beam in uniform bending, in deference to a laterally pinned arch. When a laterally fixed arch is subjected to positive uniform bending, the effects of the prebuckling deformations decrease the buckling moment, and the reduction of the buckling moment increases with an increase of the included angle and of the out-of-plane slenderness ratio of the arch. When a laterally fixed arch is subjected to negative uniform bending, the effects of the prebuckling deformations decrease the absolute value of its buckling moment when the included angle is very small, but increase the absolute value of the buckling moment when the included angle exceeds a certain value. The increase in the absolute value of the buckling moment increases with an increase of the included angle and of the out-of-plane slenderness ratio of the arch. When the ratio of the out-of-plane to the in-plane second moments of area of the cross-section is not small, both the reduction of the buckling moment of a laterally fixed arch in positive uniform bending and the increase of the buckling moment of a laterally fixed arch in negative uniform bending, are substantial.     

Imaging applications of synchrotron X-ray phase-contrast microtomography in biological morphology and biomaterials science. I. General aspects of the technique and its advantages in the analysis of millimetre-sized arthropod structure

Synchrotron‐generated X‐rays provide scientists with a multitude of investigative techniques well suited for the analysis of the composition and structure of all types of materials and specimens. Here, we describe the properties of synchrotron‐generated X‐rays and the advantages that they provide for qualitative morphological research of millimetre‐sized biological organisms and biomaterials. Case studies of the anatomy of insect heads, of whole microarthropods and of the three‐dimensional reconstruction of the cuticular tendons of jumping beetles, all performed at the beamline ID19 of the European Synchrotron Radiation Facility (ESRF), are presented to illustrate the techniques of phase‐contrast tomography available for anatomical and structural investigations. Various sample preparation techniques are described and compared and experimental settings that we have found to be particularly successful are given. On comparing the strengths and weaknesses of the technique with traditional histological thin sectioning, we conclude that synchrotron radiation microtomography has a great potential in biological microanatomy.     

The laboratory simulation of abrasive wear

Abrasive wear has long been recognised as one of the most potentially serious tribological problems facing the operators of many types of plant and machinery; several industrial surveys have indicated that wear by abrasion can be responsible for more than 50% of unscheduled machine and plant stoppages. Locating the operating point of a tribological contact in an appropriate operational ‚map’︁ can provide a useful guide to the likely nature and origins of the surface degradation experienced in use, though care must be exercised in choosing the most suitable parameters for the axes of the plot. Laboratory testing of materials and simulations of machine contacts are carried out for a number of purposes; at one level for the very practical aims of ranking candidate materials or surface hardening treatments in order of their wear resistance, or in an attempt to predict wear lives under field conditions. More fundamentally, tests may be aimed at elucidating the essential physical mechanisms of surface damage and loss, with the longer term aim of building an analytical and predictive model of the wear process itself. In many cases, component surface damage is brought about by the ingress of hard, particulate matter into machine bearing or sealing clearances. These may be running dry although, more usually, a lubricant or service fluid is present at the interface. A number of standardised wear test geometries and procedures have been established for both two- and three-body wear situations, and these are briefly described. Although abrasive wear is often modelled as following an ‚Archard’︁ equation (i.e. a linear increase in material loss with both load and time, and an inverse dependence on specimen hardness) both industrial experience and laboratory tests of particularly lubricated contacts show that this is not always the case: increasing the hardness differential in an abrasively contaminated lubricated pair may not always reduce the rate of damage to the harder surface.     

REVERSE DESIGN APPROACH FOR MECHANISM TRAJECTORY BASED ON CODE-CHAINS MATCHING

Aiming at the problem of reverse-design of mechanism, a method based on the matching of trajectory code-chains is presented. The motion trajectory of mechanism is described with code-chain, which is normalized to simplify the operation of geometric transformation. The geometric transforma-tion formulas of scale, mirror and rotation for trajectory code-chain are defined, and the reverse de-sign for mechanism trajectory is realized through the analysis and solution of similarity matching between the desired trajectory and the predefined trajectory. The algorithm program and prototype system of reverse design for mechanism trajectory are developed. Application samples show that the method can break the restriction of trajectory patterns in matching, meet the demand of partial match-ing, and overcome the influence of geometric transformation of trajectory on the reverse design for mechanism.     

The simulation and error analysis of raindrop size distribution obtained by micro rain radar

Observation of raindrop size distribution( DSD) with a vertically pointing micro rain radar( MRR) has important significance in the precipitation measurement field. The Mie scattering of large particle,vertical wind and air turbulence have great influences on the retrieval of DSD measured by MRR. This paper simulates the process of how three factors affect the inversion of DSD and the calculation of other precipitation parameters,then makes the errors analysis. Because the wavelength of MRR is 12.5mm,M ie theory is more suitable for the precipitation particle than Rayleigh approximation,w hich may cause the underestimation of number density of small droplets and the overestimation of that in middle field. The vertical wind results in inaccurate estimation of particle terminal velocity,so the diameter is measured with some errors by empirical relationship,w hich affects the calculating accuracy of radar reflectivity and rain rate. Air turbulence can broaden the pow er spectral density,of which the impact on the inversion of DSD are concentrated in small droplets field. Then the measured data from MRR is analyzed and the results prove the impacts of those factors. Finally,according to the analysis and application limits,the prospect of the future research trend of particle size distribution is conducted.     

A method for TEM visualization of the extracellular matrix three-dimensional organization in tissues

A method for obtaining high-resolution three-dimensional images of the extracellular matrix organization in tissues is described. It consists of TEM observation of rotary-shadowed platinum–carbon replicas obtained from critical-point dried resinless sections of polyethylene glycol-embedded specimens. The procedure is simple and rapid, with high rates of sample recovery. An example of its application to EM immunocytochemistry (fibronectin localization) is presented. The utilization of the method to demonstrate cell-extracellular matrix relationships, and its limitations in the study of cells are discussed.     

气化炉三维扫描测量与数据处理

以德士古气化炉耐火砖的内壁蚀损检测设备为基础,对采集到的点云数据做了进一步处理.通过对数据的筛选和剔除,实现了数据点的平滑降噪细化和精简.然后利用点云对整、网格划分和分色显示等方法,最终完成了内壁腐蚀情况的三维建模.重点讨论了点云数据的预处理及后处理的方法,并根据内壁耐火砖的腐蚀阈值,提出了一种气化炉内壁腐蚀区域的识别与分割方法.对耐火砖的腐蚀分析、气化炉的生产与维修提供了可靠依据,并在工程应用中获得了一致认可.     

车门静态强度的有限元分析模拟

轿车门系统结构设计与优化是整车开发过程中的重要环节。车门的强度直接关系到整车在冲击、碰撞等载荷下的安全问题,车门结构静态强度的计算分析,在车门结构设计进程中非常重要。文中首先简要介绍了静态强度所涉及到的非线性有限元的基本理论,然后以某中高级轿车前车门为例,利用计算机辅助分析车门的静态强度,考虑变形的非线性因素,通过对车门的非线性有限元求解来分析车门强度,由计算所得到的车门强度性能指标来指导车门的结构设计。