Research on Supplier Relationship Management of the Main Manufacturer of Large Aircraft Project： A Psychological Contract Perspective

The main manufacturer and its suppliers＇ relationship management is very important for success of the large aircraft project. The study concentrates on analysis of the relationship management on a psychological con- tract perspective, shows that constructing good psychological contract is useful to promote mutual trust, reduce the transaction cost caused by incompleteness of formal contract, avoid the risk of supplier management between the main manufacturer and suppliers of the large aircraft project. And with further understanding of the dynamic contracting process as well as formation framework of psychological contract between the main manufacturer and suppliers, we can better understand the relationship black-box and provide a new perspective for the study of the relationship management, then given some constructive suggestions to supplier relationship management.     

Drivers of Virtual Interfirm Integration and Its Impact on Performance in International Customer–Supplier Relationships

Consensus exists suggesting that advances in information and communication technologies are a major driver in restructuring Multinational Enterprises (MNEs) and their cross-border supply chain activities. However, the role of virtual interfirm integration and its antecedents, contingency conditions and its association with performance in international exchange relationship is not clearly specified. This study proposes that virtual interfirm integration can serve as an alternative governance mechanism for suppliers. Thus, we examine its drivers, moderators, and performance outcomes in international exchange relationships in the context of suppliers and their MNE customers. The empirical context is a study of 240 Taiwanese-based electronics equipment manufacturers. We explore the effect of communication culture, internal, inter-organizational, and environmental dimensions on virtual interfirm integration, and supplier performance in international exchange. We conclude by sharing our findings on the pertinence of virtual interfirm integration in the supplier–MNE buyer relationships.     

Supplier selection under risk of delivery failure: a decision-support model considering managers’ risk sensitivity

This paper studies the problem of supplier selection and order allocation in a retail supply chain (comprising suppliers, a central purchasing unit and outlets) under disruption risk. The final demand is deterministic. Suppliers are located in different geographic areas, and supplies are subject to a positive probability of disruption. Different capacity and failure probabilities for each supplier are considered. Our analysis focuses on the insurance versus profitability trade-off faced by a supply manager who buys from suppliers for the outlets. Instead of determining optimal decisions given an objective function and the risk sensitivity of the decision-maker, we use a mixed integer linear programming approach to provide decision-making support that shows a supply manager the ‘elasticity of (expected) losses versus (expected) profits’. Under this model, and depending on the profit-and-loss targets, a supply manager of known risk sensitivity (i.e. risk aversion and loss aversion) can make better decisions when choosing suppliers. Moreover, taking into account, the impact of the share of fixed costs that must be covered by the operation, we consider the net values of expected profit and loss. We discuss the potential influence of the level of the firm’s fixed costs on the supply strategy. In particular, we show how the minimum value of the gross margin needed for the strategy’s profitability affects that strategy. A numerical application is conducted to illustrate the contribution of our decision-making support mechanism, and several managerial insights are obtained.     

Investigation of the Dynamics of Evaporation of Condensed Bodies on the Basis of the Law of Spectral‐Radiation Intensity of Particles

The fundamentals of radiation theory and the mechanism of evaporation of condensed bodies are presented. The distribution functions of particles of a body by energies and by the intensity of their transition from one energy level to another in the process of evaporation have been obtained based on the law of spectralradiation intensity of the body particles. The temperature dependence of the resulting vapor flow on the outer surface of a massive condensed body and a thin layer in equilibrium and nonequilibrium states, which, in the limit, transforms to the known Hertz–Knudsen formula, has been found.     

Crystal Structure of Monohydrate of γ-Modification of Rubidium Uranoniobate

The compound γ-RbNbUO₆·H₂O was prepared for the first time as single crystals, which were studied by X-ray diffraction. Crystal data: rhombic system, space group Pcab, a = 7.614(2), b = 11.219(2), c = 16.510(3) Å, Z = 8. The crystal structure is built from uranium-containing layers of the composition [NbUO₆] _2∝ ^δ? , infinite in two directions. The water molecules and rubidium atoms distributed over two randomly occupied positions are accommodated between the layers.     

Measurement of the activity of individual subunits of single molecules of the tetrameric enzyme β-galactosidase

Escherichia coli β-galactosidase was incubated in the presence of the slow-release inhibitor D-galactal for 30 min at a concentration of 70 times its K(i). The sample was then diluted 20000-fold into buffer containing the fluorogenic substrate 9H-(1,3-dichloro-9,9-dimethylacridin-2-on-7-yl) β-D-galactoside, reducing the inhibitor concentration to K(i)/280. The sample was subjected to a capillary electrophoresis continuous flow single enzyme molecule assay. As the inhibitor dissociated while the enzyme traveled the length of the capillary, a fraction of molecules showed stepwise increases in activity. This was due to the activation of individual subunits within single molecules. The changes in activity can be largely explained in terms of each molecule containing subunits of indistinguishable activity.     

Magnetothermal Analysis of Nanocrystallization of Amorphous and Relaxations of Nanocrystalline Materials

For a few years it has been realized that nanocrystalline phases can be formed during crystallization of amorphous alloys annealed isothermally below the crystallization temperature of usual heating experiments. Data of this transformation monitored by the measurement of magnetic susceptibility are presented. A method using a magnetic balance with electronic stabilisation and combined computer facilities is applied. Constant heating and cooling rates as well as isothermal heat treatments are used. Magnetic measurements are able to detect the onset of the transformation of amorphous Ni-P alloys much earlier than was possible with differential scanning calorimetry. The transformation kinetics can be analyzed by means of the Avrami plot based on the Johnson-Mehl-Avrami equation.The kinetics of solid state reactions in the nanostructured material can be investigated similarly. Formation of a Ni-phase in a nanostructured Hf-Ni alloy could be detected in a very early stage, where calorimetric methods are not sensitive. Segregation phenomena could be detected from the experiments even after long time. The sensitivity of the applied method is not dependent on the heating rate as the sensitivity of scanning calorimetry is     

Brief Outline of the Metallurgy Department of Kunming Institute of Technology

The metallurgy department of Kunm-ing Institute of Technology,with its empha-sis on nonferrous metallurgy,is one of themajor academic and technical centres underthe China National Nonferrous Metals In-dustry Corporation(CNNC).The province of Yunnan,of whichKunming is the capital city,is very rich withresources of nonferrous metals,such as     

Analysis of clusters and uniformity of distribution of states of polarization on the Poincaré sphere

An analysis of the clusters and the uniformity of distribution of states of polarization on the surface of a Poincaré sphere generated by rotating wave plates is given. The analysis of clusters of the states of polarization is based on a spherical radial distribution function. For uniform analysis of the distribution, two methods are proposed. The first method is based on calculation of the correlation coefficient; the second method is based on calculation of the angles between pairs of the states of polarization on the Poincaré sphere. For polarization scramblers consisting of eight or more rotating wave plates, nonclustered and near-uniform distribution of states of polarization is obtained.     

Influence of Temperature‐Time Parameters of Heat Treatment on the Process of Planarization of the Surface Relief of Microelectron Structures

The authors consider the process of fusion of phosphorosilicate and borophosphorosilicate glasses in planarization of the surface of integrated microcircuits under the conditions of both isothermal and pulse heat treatment. An expression for calculating the angle of fusion of the relief step as a function of the concentration of doping impurities in a glass and the time and temperature of heat treatment is obtained.     

Modeling of the Process of Electric‐Discharge Sintering of Metal Powders

Consideration has been given to the process of electricdischarge sintering (EDS) of a powder fill in passing an electric current through it. The dependences for calculation of the heat release, the efficiency of an EDS unit, the resistance of a powder fill, and the temperature in the contact zone have been obtained. An algorithm for calculation of the technological parameters of the process of EDS has been given.     

Inhomogeneity of Grain Boundaries of ZnO Varistor

The zinc oxide varistor with a low threshold voltage and large grain size was derived with ZnO crystalline seeds from a molten salt process The chemical composition and I-V characteristics of single grains and single grain boundaries were determined by means of energy dispersive spectrum (EDS) and microcontact measurement respectively. Temperatu re dependence of dielectric loss at various frequencies and voltage dependence of capacitance were carefully measured. Based on these experimental data. the barrier heights of giain boundaries are estimated to be 0.2. 0.5 and 0.6 eV respectively corresponding to thick, th in and direct contact grain boundaries. In addition. a computerized electrical circuit simufation is employed in simulating I-V characteristics of single grain boundary within ZnO varistor. By adjustjng parameters of resistor and diode, a general agreement between the measured data and simulated curves is achieved     

The Establishment of National TC of Superconduction

National standardization technical committee of superconduction was established on Aug 26th, 2003. Tmittee contains 22 experts, of which the percentage of professors and researchers reaches up to 77.3%mention there are four academician consultants, Gan Zizhao, Zhao Zhongxian and Yang Guozhen fromAcademy of Sciences, and Zhou Lian from China Academy of Engineering. The four academicians had ed earlier in the 7th Academic Seminar of Superconduction in April that the high-tech superconduct…     

A Study of the Spread Surface of Polymeric Dispersions of Eudragit®

The rheology of non-Newtonian fluid systems is complex. Their experimental study is difficult because of the existence of many dependent variables. In the present work, a mathematical equation is proposed to calculate the spread surface from a simple viscosimetric study in a theoretical way. It was determined for multiple parameters. The spread surface has to be marked because of its direct relation to the shear stress; this fact enabled us to connect one variable dependent on the compression deformation with another dependent on the shear deformation. At the same time, the viscoelastic phenomenon can be evidenced by applying this mathematical equation.     

Investigation of Instability of Lattice of Bi_2Sr_2CaCu_2O_x

Bi2Sr2CaCu2Ox superconductor was studied by differential scanning calorimetry (DSC) and thermogravimetry (TG) in different atmospheres. It is discovered that there is a thermal anomaly in the DSC curve, associated with a weight loss in the TG curve before the melting of the sample. Careful thermal analysis and high temperature X-ray diffraction reveal that the thermal anomaly and the weight loss show an instability of the crystalline Iattice. By annealing the sample in oxygen and argon, respectively and then by TC measurement and thermal analysis, the coincidence of transition temperature with the instability is found. The coincidence is further confirmed by Y-doped 2212 phase.     

Specific Features of In-Service Failures of Parts of the Landing Gear of AN-124 “Ruslan” Aircrafts

We present the results of investigation of the axles of wheels of AN-124 Ruslan aircrafts after failures occurring either in service or in the process of resource testing. It is shown that, in service, the axles fail according to the intergranular mechanism. At the same time, in the course of stand tests, we observe fatigue fracture. On the basis of the analysis of the structure of landing gear and the results of investigation of external factors, we propose a model of formation and propagation of cracks in the axle of a wheel. We also propose several procedures aimed at the prevention of failures.