Determination of perchlorate at trace levels in drinking water by ion-pair extraction with electrospray ionization mass spectrometry

Perchlorate has been added to the U.S. Environmental Protection Agency's Drinking Water Contaminant Candidate List (CCL). The present work describes the analysis of perchlorate in water by liquid-liquid extraction followed by flow injection electrospray mass spectrometry (ESI/MS). Cationic surfactants, mostly alkyltrimethyl-ammonium salts, are used to ion-pair aqueous perchlorate, forming extractable ion pairs. The cationic surfactant associates with the perchlorate ion to form a complex detectable by ESI/MS. The selectivity of the extraction and the mass spectrometric detection increases confidence in the identification of perchlorate. The method detection limit for perchlorate based on 3.14 sigma n-1 of seven replicate injections was 100 ng L-1 (parts per trillion). Standard addition was used to quantitate perchlorate in a drinking water sample from a contaminated source, and the concentration determined agreed within experimental error with the concentration determined by ion chromatography.     

Determination of lithium in mineral water samples by X-ray fluorescence spectrometry

A method is shown for the determination of trace amounts of lithium by X-ray fluorescence spectrometry (XRF) in natural mineral waters with various therapeutic effects originating in Poland. The method is an expansion of X-ray fluorescence spectrometry applications to the determination of a very light element. The direct determination of lithium by XRF is practically impossible due to the extremely low fluorescence yield and long-wavelength characteristic radiation of such a light element. The lithium is determined via iron after precipitation with stoichiometric potassium lithium periodatoferrate(III) complex. The solution obtained after dissolving the complex was pipetted onto Mylar foil for XRF analysis. As little as 1 μg Li may be determined with this method. Accurate lithium determinations can be obtained using simple calibration samples requiring only pipetting Fe solution in the range 8.0-28.0 μg onto the Mylar foil. The prepared samples are thin, which allows the errors resulting from self-absorption or matrix effects to be neglected. Our studies give essential information about the quality of the analyzed waters.     

Analysis of trace levels of sulfonamide and tetracycline antimicrobials in groundwater and surface water using solid-phase extraction and liquid chromatography/mass spectrometry

A method has been developed for the trace analysis of two classes of antimicrobials consisting of six sulfonamides (SAs) and five tetracyclines (TCs), which commonly are used for veterinary purposes and agricultural feed additives and are suspected to leach into ground and surface water. The method used solid-phase extraction and liquid chromatography/mass spectrometry (LC/MS) with positive ion electrospray. The unique combination of a metal chelation agent (Na2EDTA) with a macroporous copolymer resulted in quantitative recoveries by solid-phase extraction (mean recovery, 98 +/- 12%) at submicrogramper-liter concentrations. An ammonium formate/formic acid buffer with a methanol/water gradient was used to separate the antimicrobials and to optimize the signal intensity. Mass spectral fragmentation and ionization characteristics were determined for each class of compounds for unequivocal identification. For all SAs, a characteristic m/z 156 ion representing the sulfanilyl fragment was identified. TCs exhibited neutral losses of 17 amu resulting from the loss of ammonia and 35 amu from the subsequent loss of water. Unusual matrix effects were seen only for TCs in this first survey of groundwater and surface water samples from sites around the United States, requiring that TCs be quantitated using the method of standard additions.     

Determination of alkylbenzyldimethylammonium chlorides in river water and sewage effluent by solid-phase extraction and gas chromatography/mass spectrometry

This study presents a modified method to analyze alkylbenzyldimethylammonium chlorides (ABDACs) in river water and sewage effluent. The method involves mixed samples with linear alkylbenzenesulfonates (LAS) as a counterion to enhance the extraction of ABDAC residues from an RP-18 solid-phase cartridge by formation of hydrophobic ion-pair complexes. The ABDACs were then eluted with methanol-ethyl acetate (1:1, v/v) and formed to their corresponding alkyldimethylamines by the Hofmann degradation with potassium tert-butoxide. The alkyldimethylamines were then identified and quantitated by gas chromatograph/mass spectrometry (GC/MS). The results indicate that, in the presence of LAS, debenzylation of ABDACs occurs selectively at a temperature higher than 90 degrees C to produce the corresponding nonionic alkyldimethylamines. The method proposed herein provides a high precision and sensitivity for ABDACs, to quantitation at < or =0.1 microg/L in 500 mL of the water samples. The average recovery of ABDAC spiked water samples was 95% with relative standard deviations (RSD, n = 7) of 9%. The RSDs of three replicate environmental sample analyses ranged from 5 to 11%. Direct HPLC method was applied to evaluate the GC/MS method, and compatible results were observed.     

A multi-element solid-phase extraction method for trace metals determination in environmental samples on Amberlite XAD-2000

A method for the preconcentration of some transition elements at trace level was proposed using a column filled with Amberlite XAD-2000 resin. Metal ions were adsorbed on XAD-2000 as their diethyldithiocarbamate chelates, then analytes retained on the resin were eluted by 1 mol L(-1) nitric acid in acetone and determined by flame atomic absorption spectrometry (FAAS). The influences of some analytical parameters including pH of sample solution, ligand amount, the type, concentration and volume of elution solution, flow rates of the sample and eluent solutions, adsorption capacity of the resin and sample volume on the preconcentration efficiency have been investigated. The influences of some matrix elements were also examined. The detection limit (N=20, 3 sigma) for Mn(II), Fe(II), Co(II), Cu(II), Cd(II), Zn(II), Pb(II) and Ni(II) were found as 0.20, 0.35, 0.25, 0.20, 0.20, 0.15, 0.45 and 0.25 microg L(-1), respectively. The validation of the procedure was carried out by analysis of certified reference materials. The proposed method was applied to natural waters and kale vegetable (Brassica oleracea var. acephala).     

Determination of platinum, palladium, and rhodium in automotive catalysts using high-energy secondary target X-ray fluorescence spectrometry

A fast and direct determination procedure for precious metals in spent automotive catalyst was developed using the novel high-energy polarized-beam XRF. A sample preparation method working directly on the ground material was optimized. The material was pressed as a pellet using wax as a binder; no internal standard was added. The standards for this application were available spent automotive catalyst, previously analyzed by ICP-OES to verify their concentration, prepared in the same way as the unknown samples. The investigated concentration ranged from nearly 0 to approximately 2700 ppm for Pt, to 500 ppm for Rh, and to 7500 ppm for Pd. The repeatability of the XRF measurement appeared to be better than 0.5%, while the precision of the whole method was approximately 1%. The accuracy of the XRF method was verified with the well-established (but very time-consuming) ICP-OES method; a good agreement (no difference when using the 95% confidence interval) was found for the results. When using an irradiation time of 500 s for the CsI secondary target and the Zr secondary target, the detection limits for Pt, Pd, and Rh were found to be better than 5 ppm.     

Determination of basic antidepressants and their N-desmethyl metabolites in raw sewage and wastewater using solid-phase extraction and liquid chromatography-tandem mass spectrometry

A novel analytical method has been developed for the determination of six basic antidepressants (venlafaxine, sertraline, paroxetine, citalopram, amitriptyline, and fluoxetine) and four of their metabolites (O-desmethylvenlafaxine, desmethylsertraline, nortriptyline, and norfluoxetine) in raw sewage and roughly primary-treated wastewater. For analytical development purposes, two ion exchange solid-phase extraction cartridges were compared. Extracts were analyzed using liquid chromatography-tandem mass spectrometry (LC-MS/MS) with positive-mode electrospray (+ESI) and selected reaction monitoring transitions. The choice of a basic mobile phase significantly improved the instrumental sensitivity (by up to 14-fold for norfluoxetine) relative to common +ESI acidic mobile phases. In addition to the remarkable gain in sensitivity, negligible matrix effects were also observed in the raw sewage samples. Analyte recoveries ranged from 80 to 103% and effluent detection limits from 0.048 to 0.10 ng/L. Samples collected at the Montreal Wastewater Treatment Plant showed the unequivocal presence of all the target compounds at concentrations of 2-346 ng/L. The target antidepressants were also detected in samples taken from the effluent receiving waters (i.e., the St. Lawrence River) but at lower concentrations (0.41-69 ng/L). The highly sensitive proposed method constitutes one of the best means for monitoring the environmental occurrence of tricyclic antidepressants, selective serotonin reuptake inhibitors (SSRIs), and some of their metabolites.     

Online in-tube solid-phase extraction using a nonfunctionalized PVC tube coupled with ICPMS for in vivo monitoring of trace metals in rat brain microdialysates

We have developed a simple, automatic, online in-tube solid-phase extraction (SPE) method for the preconcentration of trace elements from saline samples. The method takes advantage of the adsorption of trace metal ions onto the interior of a nonfunctionalized PVC tube as a means of separation from the matrix salt. The adsorption of transition metal ions is presumably dominated by Lewis acid/base interactions, which facilitate the formation of metal-PVC complexes. For simultaneous determination of multiple trace metals in the extracellular fluid from the brains of anesthetized rats, we developed an online analytical system comprising microdialysis sampling, the established in-tube extraction procedure, and ICPMS. In the extraction step, the efficiency was optimal when the pH of the sample was adjusted to 8.0 using phosphate buffer. After extraction onto the interior of PVC tube, the adsorbed analytes were eluted with 0.5% HNO 3 prior to online ICPMS measurement. For those elements present in the extracellular fluid at less than nanogram-per-milliliter concentrations (i.e., Cu, Zn, and Mn), a temporal resolution of 12 min was required to collect enough microdialysate to meet the sensitivity requirements of the ICPMS instrument. Noteworthily, because washing and postconditioning the interior of PVC tube are not necessary, a relatively unsophisticated and clean procedure was attained and extremely low detection limits in the range of 5.0 to 510 ng L (-1) were thus obtained for the analysis of Mn, Cu, Zn, Pb, Cd, Ni, and Co in microdialysate samples of 8 microL by ICPMS. To the best of our knowledge, this study is the first to exploit PVC peristaltic tubing as an SPE adsorbent in the laboratory-on-valve mode for online sample treatment and trace metal preconcentration prior to ICPMS measurement. We confirmed the analytical reliability of this method through the analysis of the certified reference material SLEW-3 (estuarine water) and 2670a (human urine) and demonstrated its applicability through simultaneous in vivo monitoring of the basal concentrations and concentration profiles of multiple metal ions in the brain extracellular fluid of a living rat.     

Determination of trace nickel in water samples by cloud point extraction preconcentration coupled with graphite furnace atomic absorption spectrometry

A new method based on the cloud point extraction (CPE) preconcentration and graphite furnace atomic absorption spectrometry (GFAAS) detection was proposed for the determination of trace nickel in water samples. When the micelle solution temperature is higher than the cloud point of surfactant p-octylpolyethyleneglycolphenyether (Triton X-100), the complex of Ni2+ with 1-phenyl-3-methyl-4-benzoyl-5-pyrazolone (PMBP) could enter surfactant-rich phase and be concentrated, then determined by GFAAS. The main factors affecting the cloud point extraction were investigated in detail. An enrichment factor of 27 was obtained for the preconcentration of Ni2+ with 10 mL solution. Under the optimal conditions, the detection limit of Ni2+ is 0.12 ng mL(-1) with R.S.D. of 4.3% (n = 10, c = 100 ng mL(-1)). The proposed method was applied to determination of trace nickel in water samples with satisfactory results.     

Determination of trace perchlorate concentrations by anion-selective membranes and total reflection X-ray fluorescence analysis

In the present work a method for the determination of perchlorate trace levels by total reflection X-ray fluorescence (TXRF) is introduced. Perchlorate anions were concentrated on anion-selective membranes that had been prepared on the surface of TXRF quartz reflectors. Various complexation substances were used in the membranes. The reflectors were immersed in water solutions containing nanogram per milliliter (ppb) concentrations of perchlorate. After this step, the reflectors were taken out of the solution and they were analyzed by TXRF, using a copper X-ray tube and helium flow on the target (to lower the argon peak which is present in the air). The effects of various experimental parameters were examined, and the possibility of discrimination between chloride and perchlorate anions was shown. Minimum detection limits lower than 1 ng/mL and good linearity at the concentration range of 1-50 ng/mL were achieved. The method is applicable for the analysis of perchlorate in drinking water samples.     

熔融制样X射线荧光光谱法测定矿石中五氧化二钒的含量

使用熔融制样-X射线荧光光谱法(XRF),以四硼酸锂做熔剂,样品与熔剂比为1∶10熔融制样.分析矿石中0.006％～98％的五氧化二钒含量.目前五氧化二钒标准物质较少,不能满足各含量段矿石类样品的准确定量要求.本方法通过加入高纯V2O5制备人工标准样品和现有五氧化二钒标准物质相结合绘制工作曲线,解决了现有标准物质较少的...     

Determination of trace metals by atomic absorption spectrometry after coprecipitation with europium hydroxide

A procedure for the determination of trace amounts of chromium(III), iron(III), lead(II) and manganese(II) is described, that combines atomic absorption spectrometry-europium hydroxide coprecipitation. The influences of analytical parameters including amount of europium(III), amount of ammonia, sample volume, etc. were investigated on the recoveries of analyte ions. The effects of concomitant ions were also examined. The recoveries of the analyte ions were in the range of 95-104%. The detection limits (3 s) were in the range of 1.7-17.1 microg/L. The validation of the presented coprecipitation procedure was performed by the analysis of Bovine Liver 1577-b and BCR-144R Sewage Sludge (domestic origin) standard reference materials. The method was applied to the determination of analytes in real samples including natural waters and some food, soil and fertilizer samples, etc. and good results were obtained (relative standard deviations < 10%, recoveries > 95%).     

Determination of trace aluminum in biological and water samples by cloud point extraction preconcentration and graphite furnace atomic absorption spectrometry detection

A cloud point extraction (CPE) method for the preconcentration of trace aluminum prior to its determination by graphite furnace atomic absorption spectrometry (GFAAS) has been developed. The CPE method is based on the complex of Al(III) with 1-phenyl-3-methyl-4-benzoyl-5-pyrazolone (PMBP), and then entrapped in non-ionic surfactant Triton X-114. PMBP was used not only as chelating reagent in CPE preconcentration, but also as chemical modifier in GFAAS determination. The main factors affecting CPE efficiency, such as pH of sample solution, concentration of PMBP and Triton X-114, equilibration temperature and time, were investigated in detail. An enrichment factor of 37 was obtained for the preconcentration of Al(III) with 10 mL solution. Under the optimal conditions, the detection limit of this method for Al(III) is 0.09 ng mL(-1), and the relative standard deviation is 4.7% at 10 ng mL(-1) Al(III) level (n=7). The proposed method has been applied for determination of trace amount of aluminum in biological and water samples with satisfactory results.     

电感耦合等离子体质谱法测定饮用水中微量元素

采用电感耦合等离子体质谱法快速测定饮用水中的微量元素 ,样品处理简便 ,检出限低 ,重现性好 ,分析速度快。方法检出限为 (0 0 0 7～ 0 911) μg L ,精密度达到 0 73%～ 4 87%。     

Determination of polycyclic aromatic hydrocarbons in drinking water samples by solid-phase nanoextraction and high-performance liquid chromatography

A novel alternative is presented for the extraction and preconcentration of polycyclic aromatic hydrocarbons (PAH) from water samples. The new approachwhich we have named solid-phase nanoextraction (SPNE)takes advantage of the strong affinity that exists between PAH and gold nanoparticles. Carefully optimization of experimental parameters has led to a high-performance liquid chromatography method with excellent analytical figures of merit. Its most striking feature correlates to the small volume of water sample (500 microL) for complete PAH analyses. The limits of detection ranged from 0.9 (anthracene) to 58 ng.L (-1) (fluorene). The relative standard deviations at medium calibration concentrations vary from 3.2 (acenaphthene) to 9.1% (naphthalene). The analytical recoveries from tap water samples of the six regulated PAH varied from 83.3 +/- 2.4 (benzo[ k]fluoranthene) to 95.7 +/- 4.1% (benzo[ g,h,i]perylene). The entire extraction procedure consumes less than 100 microL of organic solvents per sample, which makes it environmentally friendly. The small volume of extracting solution makes SPNE a relatively inexpensive extraction approach.     

Feasibility of analyzing fine particulate matter in air using solid-phase extraction membranes and dynamic subcritical water extraction

We have evaluated the feasibility of using Empore solid-phase extraction (SPE) membranes as an alternative to conventional techniques for sampling fine airborne particulate matter (PM), including nanoparticles, utilizing a scanning mobility particle sizer (SMPS) and a condensation particle counter to evaluate their efficiency for trapping fine particles in the 10-800 nm size range. The results demonstrate that the membranes can efficiently trap these particles and can then be conveniently packed into an extraction cell and extracted under matrix solid-phase dispersion (MSPD) conditions. The potential utility of sampling PM using Empore membranes followed by dynamic subcritical water extraction (DSWE) for fast, efficient, class-selective extraction of polycyclic aromatic hydrocarbons (PAHs) associated with the particles, prior to changing the solvent and analysis by GC/MS, was then explored. The performance of the method was tested using National Institute of Standards and Technology (NIST)-certified "urban dust" reference material (SRM 1649a) and real samples collected at a site in central Rome with heavy road traffic. The method appears to provide comparable extraction efficiency to that of conventional techniques and with using GC/MS, detection limits ranged in the few picograms per cubic meter level. Sampling PM by Empore membranes may reduce the risks of losses of semivolatile compounds, while allowing relatively high sampling flow rates and safe sample storage. Moreover, the combination of MSPD with DSWE permits specific fractions of the PM components to be eluted, thereby generating clean extracts and reducing both analysis time and sample manipulation.