Solid-liquid extraction fluorescence line narrowing spectroscopy of fluoroquinolones in aqueous samples

We present a simple, selective, and sensitive method for the analysis of fluoroquinolones in water samples without previous separation. Octadecyl silica membranes are used with the dual purpose of sample preconcentration and solid substrate for fluorescence line narrowing spectroscopy. Measurements at liquid helium temperature (4.2 K) are easily made with the aid of a cryogenic fiber-optic probe. The entire procedure takes less than 15 minutes per sample and it consumes only 100 microL of organic solvent. Unambiguous fluoroquinolone determination is accomplished via wavelength-time matrices, which provide simultaneous information on spectral peak purity and fluorescence lifetime. We show that 10 mL of water sample are enough to detect analyte concentrations at parts-per-billion levels. The potential of this approach for the analysis of real world samples is demonstrated with the analysis of a synthetic mixture of seven fluoroquinolones spiked in a heavily contaminated water sample.     

Sorption of polycyclic aromatic hydrocarbons on electrospun nanofibrous membranes: sorption kinetics and mechanism

Five types of nanofibrous membranes were prepared by electrospinning poly(?-caprolactone) (PCL), poly(d,l-lactide) (PDLLA), poly(lactide-co-caprolactone) (P(LA/CL)), poly(d,l-lactide-co-glycolide) (PDLGA) and methoxy polyethylene glycol-poly(lactide-co-glycolide) (MPEG-PLGA), respectively. These electrospun nanofibrous membranes (ENFMs) were used to adsorb anthracene (ANT), benz[a]anthracene (BaA) and benzo[a]pyrene (BaP) from aqueous solution, and the sorption kinetics and isotherms of these PAHs on the five ENFMs were investigated. The pseudo-second-order model (PSOM) can well describe the sorption kinetics of the three PAHs on five ENFMs, and the partition-adsorption model (PAM) can interpret the sorption processes of PAHs on the ENFMs. PCL ENFMs, which had the largest surface areas (8.57 m² g⁻¹), exhibited excellent sorption capacity for ANT at over 4112.3 ± 35.5 μg g⁻¹. Moreover, the hydrophobicity and pore volume of ENFMs significantly affected the sorption kinetics and sorption capacity of the PAHs. The main sorption mechanisms of three PAHs on the PDLLA ENFMs included hydrophobic interactions and pore-filling, while those of PCL, P(LA/CL) and PDLGA ENFMs were dominated by the hydrophobic interactions. The sorption mechanisms of MPEG-PLGA ENFMs primarily included pore-filling, hydrogen bonding interactions and hydrophobic interactions. Additionally, π-π bonding interaction was also deduced to be involved in all of ENFMs sorption systems.     

Microwave-assisted extraction of polycyclic aromatic hydrocarbons from marine sediments using nonionic surfactant solutions

Microwave-assisted micellar extraction (MAME) has been tested for the recovery of polycyclic aromatic hydrocarbons (PAHs) present in samples of marine sediments. An aqueous solution of the nonionic surfactant polyoxyethylene(23)dodecyl ether (Brij 35) was employed as the extracting medium. The proposed approach showed recovery efficiencies comparable to those afforded by the Soxhlet technique with organic solvents, but a neat reduction of the extraction times and a better reproducibility were observed. A MAME-based protocol was successfully applied for the analysis of a certified sample.     

Application of solid-phase extraction to determination of polycyclic aromatic hydrocarbons in sewage sludge extracts

The study presents the efficiency of sewage sludge sample clean-up with the application of SPE columns with various types of adsorbents. Six columns were tested: C8-octyl, C18 PolarPlus, C18-octadecyl, silicagel (SG), phenyl, cyano. The highest efficiency of recovery was observed for C18-octadecyl. Then, using C18, the method was optimised by changing the following parameters: eluent type and volume, column drying and effect of washing of cartridge.     

Dialysis of persistent organic pollutants and polycyclic aromatic hydrocarbons from semipermeable membranes. A procedure using an accelerated solvent extraction device

Accelerated solvent extraction (ASE) is one of the most recent solid-phase extraction methods and has caught on all over the world in numerous laboratories. Until now it was not known that this device is also very suitable for performing dialysis. In this study, development of a rapid dialysis procedure (RDP) was described that is based on the dialysis of persistent organic xenobiotics from triolein-containing semipermeable membrane devices (SPMDs) using ASE. All the operating parameters were optimized within the framework of usage. The RDP procedure was compared with the conventional dialytic recovery of target analytes under atmospheric pressure using spiked analytes and real field samples of SPMDs exposed to urban air. The main advantages of the RDP in comparison to the conventional dialysis are the speed, with up to 70 times faster taking only 40 min, and the considerable reduction in solvent consumption (by two-thirds) when SPMDs with standard configuration are used. Moreover, the RDP is also suitable as an analytical cleanup procedure for the same analytes from various types of lipid samples and other difficult matrixes using semipermeable membranes.     

Sorption of polycyclic aromatic hydrocarbons on particulate organic matters

Particulate organic matter (POM) is a key organic matter fraction which can influence soil fertility. Its interactions with hydrophobic organic pollutants (HOCs) have not been characterized and the mechanisms of retention of HOCs by POM remain unclear. In the present study, sorption behaviors of polycyclic aromatic hydrocarbons (PAHs) naphthalene (NAP), phenanthrene (PHE), and pyrene (PYR) by POMs separated from different soils were examined and the POMs were characterized by elemental analysis, solid state ¹³C NMR, and Fourier transform infrared spectroscopy (FT-IR). The results indicated that POMs were mainly composed of aliphatic components with high polarity. The different original POMs showed similar chemical composition and configuration. Sorption behaviors of PAHs indicated that there was no significant difference in sorption capacity among the POMs. Sorption of NAP and PHE by POMs displayed a nonlinear isotherm, while sorption of PYR yielded a linear isotherm. No significant hysteresis and ionic strength effect were observed for PAH desorption from the POMs.     

Soluble polycyclic aromatic hydrocarbons in raw coals

Polycyclic aromatic hydrocarbons (PAHs) are considered to be a group of compounds that pose potential health hazards since some PAHs are known carcinogens. During coal utilization processes, such as coal combustion and pyrolysis, PAHs released may be divided into two categories according to their formation pathways. One category is derived from complex chemical reactions and the other is from free PAHs transferred from the original coals. PAHs released from complex chemical reactions during combustion and pyrolysis have received considerable attention in recent years. However, free PAHs contained in raw coals have not been seriously considered as a source of these materials to be released during the utilization of coal. The goal of this study was to observe the relation between the content of PAHs in different coals and the elemental composition of the coals. In this study, eight bituminous coals with dry, ash-free carbon values varying from 65% to 90% were selected. Each coal was extracted with dichloromethane in a Soxhlet extractor for 6 h. The extracts were quantitatively analyzed with a gas chromatograph/mass spectrometer (GC-MS). More than 20 kinds of PAHs were identified. The total amount of PAHs determined varied from 1.2 to 28.3 mg/kg from the various coal types. The maximum total PAHs extracted was reached when the carbon content exceeded 84% by weight.     

Simultaneous extraction and fractionation of polycyclic aromatic hydrocarbons and their oxygenated derivatives in soil using selective pressurized liquid extraction

In this study, a selective pressurized liquid extraction (PLE) method which can extract polycyclic aromatic hydrocarbons (PAHs) and their oxygenated derivatives (oxy-PAHs) from contaminated soil and simultaneously separate them into two fractions was developed. The method uses extraction cells packed with a chromatographic adsorbent and extraction solvents of increasing polarity. Several experiments were conducted on both spiked and authentic contaminated soil samples. Different types of adsorbents, combinations of extraction solvents, and extraction temperatures were tested in order to find a method that could fulfill the purpose of the study. The final method was based on extraction cells packed with 2% deactivated silica gel. The PAHs were extracted with cyclohexane/dichloromethane (9:1) at 120 degrees C, after which the oxy-PAHs where extracted with cyclohexane/dichloromethane (1:3) at 150 degrees C. The PAHs and oxy-PAHs were efficiently separated into two fractions, and only trace amounts of some compounds were found in the inappropriate fraction. The recoveries of the PAHs were mostly above 70% and of the oxy-PAHs, above 90%. The linearity of the method was good, and the calibration curves for most compounds had a regression coefficient better than 0.99 and an intercept close to the origin of coordinates. When the selective PLE method was applied to seven authentic soil samples, the results were found to be in good agreement with those of a reference method based on Soxhlet extraction and silica gel cleanup and also in good agreement with the certified reference values available for one of the soils. The selective PLE method is faster and consumes less solvent than a traditional method based on separate extraction and fractionation steps. The selective PLE method is, therefore, suitable for the concurrent analysis of PAHs and oxy-PAHs during large-scale soil contamination studies. This will provide more information about the soil contamination and the levels of toxicity than an ordinary PAH analysis.     

Summarizing the effectiveness of supercritical fluid extraction of polycyclic aromatic hydrocarbons from natural matrix environmental samples

A summary of the supercritical fluid extraction (SFE) of polycyclic aromatic hydrocarbons (PAHs) from four natural matrix Standard Reference Materials (SRMs) is presented. The work involved the investigation of the effects of extraction fluid [carbon dioxide (CO(2)), chlorodifluoromethane (R22), and 1,1,1,2-tetrafluoroethane (HFC134a)], fluid modifier (dichloromethane and aniline), temperature (60, 150, and 200 °C) and added water on the SFE recoveries of PAHs compared to certified results from Soxhlet extractions. For SRM 1649a (Urban Dust/Organics), R22 yielded excellent recoveries (>90% of certified concentrations) of all PAHs measured, while results for the same SRM using HFC134a as the fluid were typically <80% of the certified concentrations for most of the PAHs measured. For SRM 1941a and 1944, both aquatic sediments with similar physical and chemical compositions, extractions of the wet materials with dichloromethane-modified CO(2) (10%, v/v) yielded quantitative recoveries of all PAHs for SRM 1944 but an obvious trend of lower recoveries for higher molecular weight PAHs (≥228 amu) for SRM 1941a. Results of SFEs of SRM 1650 (Diesel Particulate Matter) showed that this material is the most refractory of the SRMs investigated in this study, with recoveries of indeno[1,2,3-cd]pyrene and benzo[ghi]perylene at <20% of the Soxhlet results.     

Laser mass spectrometric analysis of polycyclic aromatic hydrocarbons with wide wavelength range laser multiphoton ionization spectroscopy

In many analytical techniques, 1+1 resonance-enhanced multiphoton ionization (1+1 REMPI) is used because it is an efficient and optically selective soft ionization method. While 1+1 REMPI of jet-cooled molecules has been extensively studied, little has been reported so far about this mechanism as it is used in analytical techniques, that is, in the cases where the molecules are not jet-cooled and where widely varying ionization wavelengths are employed. We used two-step laser mass spectrometry (L2MS) to study the wavelength (238-310 nm) dependence and the laser pulse energy dependence of the ion yield for 17 polycyclic aromatic hydrocarbons (PAHs). We discuss how these data allow prediction of the efficiency of 1+1 REMPI for a given compound. These advances open new perspectives for better understanding the L2MS spectra obtained directly from complex mixtures such as environmental samples.     

Fluorescence spectroscopy of complex aromatic mixtures

The contribution of two- to seven-ring polycyclic aromatic hydrocarbons (PAH) and of larger aromatic structures contained in complex PAH-laden mixtures collected in flames was evaluated by fluorescence spectroscopy. A composition procedure of the fluorescence spectra of individual PAHs, analyzed by gas chromatography/mass spectrometry (GC/MS) was applied for the evaluation of their contribution to the fluorescence spectra of PAH-laden mixtures. In this way, it was possible to put in evidence the contribution to the total fluorescence spectrum of high molecular weight aromatic species present in the PAH-laden mixtures and not detectable by GC/MS. Qualitative and quantitative interpretation of synchronous and conventional fluorescence spectra of PAH-laden mixtures formed in combustion processes was proposed. The composition procedure was showed to be reliable in the UV-visible region for samples dissolved in cyclohexane solutions, but failed in the UV region when the solvent contained heavy atoms, as in the case of dichloromethane. However, the heavy-atom solvent effect was not sufficient to explain the depression of the UV fluorescence signal. Energy transfer interaction between fluorene and other fluorescing PAHs was suggested to be also responsible for this effect on the basis of fluorescence studies performed on single PAHs and their mixtures in cyclohexane, methanol, and dichloromethane.     

Detection of polycyclic aromatic hydrocarbons using quartz crystal microbalances

A chemically coated piezoelectric sensor has been developed for the determination of PAHs in the liquid phase. An organic monolayer attached to the surface of a gold electrode of a quartz crystal microbalance (QCM) via a covalent thiol-gold link complete with an ionically bound recognition element has been produced. This study has employed the PAH derivative 9-anthracene carboxylic acid which, once bound to the alkane thiol, functions as the recognition element. Binding of anthracene via pi-pi interaction has been observed as a frequency shift in the QCM with a detectability of the target analyte of 2 ppb and a response range of 0-50 ppb. The relative response of the sensor altered for different PAHs despite pi-pi interaction being the sole communication between recognition element and analyte. It is envisaged that such a sensor could be employed in the identification of key marker compounds and, as such, give an indication of total PAH flux in the environment.     

Ex-situ bioremediation of polycyclic aromatic hydrocarbons in sewage sludge

Polycyclic aromatic hydrocarbons (PAH) are regarded as environmental pollutants. A promising approach to reduce PAH pollution is based on the implementation of the natural potential of some microorganisms to utilize hydrocarbons. In this study Proteiniphilum acetatigenes was used for bioaugmentation of sewage sludge to improve the PAH removal. Bioaugmentation experiments were performed in parallel semi-continuously fed reactors started up with digested primary and secondary sludge. Three bioaugmentation approaches were investigated: A1, addition of bacteria once during starting up; A2, addition of bacteria at the beginning and then every 2nd day and A3, addition of encapsulated bacteria once during starting up. Removal of PAH was found to be both biotic and abiotic. All three approaches had a positive effect of the biological removal of PAH. Highest biological removal of individual PAH (up to 80%) was observed using continuous addition (approach A2) of the bacteria to the reactors. In general, the effect of bioaugmentation was higher in the reactors fed with primary sludge compared to the reactors fed with mixed sludge. Bioaugmentation resulted in biological removal of low molecular weight PAH in the reactors fed with primary sludge using all three approaches while clear biological removal of the medium- and high molecular weight PAH only was observed if the bacteria were added continuously (approach A2).     

Pollution patterns of polycyclic aromatic hydrocarbons in tobacco smoke

Concentrations of polycyclic aromatic hydrocarbons (PAHs) in tobacco smoke of 12 commercial brand cigarettes were determined in a simulated chamber of 20.25 m3 in size. The total concentrations of 17 PAHs (summation operatorPAHs) in the chamber were 3500 and 1152 ng/m3 in vapor phase and particulate phase, respectively. In vapor phase, the yield of naphthalene (NA) appeared to be the most abundant (2462 ng/cig) followed by fluorene (FLUOR) and acenaphthylene (ACY), while the yield of benzo[ghi]perylene (BP) was the most abundant (259.7 ng/cig) in particulate phase followed by phenanthrene (PHEN) and FLUOR. The proportion of PAHs in particulate phase increased with increasing molecular weight. PAHs with two to six rings accounted for 40.2%, 35.3%, 11.7%, 7.6%, 5.2% of summation operatorPAHs, respectively. There was no obvious correlation between PAHs, benzo[a]pyrene (BaP) concentrations in tobacco smoke and smoking tar contents, nicotine contents. With the source fingerprint of PAHs in tobacco smoke, NA could be regarded as the marker of tobacco smoke source because of its largest contribution to summation operatorPAHs (40.2%), followed by FLUOR (12.7%) and ACY (9.8%). Further study indicated that more than 80% of BaP in indoor air of resident homes in Hangzhou was from tobacco smoke.     

Structures and electronic properties of thin-films of polycyclic aromatic hydrocarbons

We report the fabrication and characterization of organic thin-film transistors (TFTs) using several polycyclic aromatic hydrocarbons (PAHs). Pentacene, ovalene, dibenzocoronene and hexabenzocoronene were deposited as organic semiconductors on silicon wafers with gold electrodes as the bottom-contact configuration of the TFTs. The pentacene TFT showed the highest field-effect mobility of more than 0.1 cm²/Vs in comparison with the other PAHs. The results clarified that the high field-effect mobility of the pentacene thin film is due to large grain size and intrinsic electronic properties.     

Effect of polycyclic aromatic hydrocarbons on detection sensitivity of ultratrace nitroaromatic compounds

Polycyclic aromatic hydrocarbons (PAHs) with different numbers of pi-electrons and geometric symmetry of pi-systems, including anthracene, phenanthrene, pyrene, triphenylene, perylene, benzo[ghi]perylene, and coronene, were chosen to modify glassy carbon electrodes (GCEs) by self-assembling. The self-assembled monolayer of PAHs was investigated by STM and was used in the electrochemical detection of nitroaromatic compounds (NACs). The results indicate that PAH-modified GCE shows higher sensitivity to NACs than an unmodified one. Among the seven different PAHs, coronene-modified GCE exhibits the highest sensitivity to 2,4,6-trinitrotoluene and 1,3,5-trinitrobenzene.