共查询到20条相似文献,搜索用时 101 毫秒
1.
薄膜太阳电池的研发现状和产业发展 总被引:1,自引:0,他引:1
在人类社会可持续发展的进程中,必须解决好能源危机与环境保护等问题.在各国政府的大力扶持和相关鼓励政策的刺激和推动下,太阳能光伏产业得到了迅猛发展,光伏组件的成本不断降低,应用领域迅速扩大.其中,薄膜太阳电池由于其用料少、工艺简单、能耗低、成本有一定优势而越来越被业界所接受,近3年来薄膜太阳电池产业得到了较快发展,全球薄膜太阳电池产量从2007年的400 MW增长到2008年的890 MW,同比增长120%以上.目前已经能进行产业化大规模生产的薄膜电池主要有3种:硅基薄膜太阳电池、铜铟镓硒薄膜太阳电池(CIGS)和碲化镉薄膜太阳电池(CdTe).对上述3类薄膜太阳电池的特性、发展历史、研发现状以及产业发展状况作了介绍,对研究与产业中存在的问题以及未来研究方向也提出了看法. 相似文献
2.
3.
4.
太阳电池的发展包括3个阶段,已商业化生产的第一代单晶硅电池成本较高,而薄膜化的第二代太阳电池虽大幅降低了成本,但效率不理想。因此,期待比第一代太阳电池有更高转换效率的同时,保持第二代太阳电池低成本优势的第三代太阳电池的诞生。其中,半导体量子点太阳电池因具有高达66%的热力学转换效率备受关注。介绍了基于量子点的几种低价太阳电池,包括全无机纳米结构太阳电池、染料敏化电池及聚合物太阳电池等,重点介绍了由有机聚合物和无机半导体量子点组成的杂化聚合物/量子点电池的结构及影响器件效率的关键因素。 相似文献
5.
近些年,人们越来越关注太阳辐射的光伏利用。光伏发电技术在迅猛发展,薄膜太阳电池从占有主导地位的硅晶片技术中抢占了一定的市场份额。其中铜锌锡硫薄膜太阳电池因具有低成本、高的光电转化效率和吸收系数、合适的禁带宽度和环境友好等优点成为近年来薄膜太阳电池研究的热点。本文阐述了铜锌锡硫薄膜太阳电池的器件结构和性能特点,介绍了铜锌锡硫薄膜太阳电池的制备方法和研究进展,并对今后主要的发展方向进行了展望。 相似文献
6.
7.
8.
9.
10.
11.
This article reviews the new concepts and new trends of solar cell development. To increase the photoelectric conversion efficiency, reduce the cost, and for application in a much broader field, thin film solar cell, flexible solar cell, and tandem solar cell have become important subjects to be studied. As the representative of the solar cells of the third generation, the progress and challenges of dye sensitized solar cell was also reviewed. 相似文献
12.
13.
CdTe多晶薄膜具有接近理想光谱响应状态的禁带宽度(1.45eV)和高达10-5cm-1的光吸收系数,是较具前途的光伏材料,而CdTe薄膜太阳能电池由于具有低的制造成本和高的转换效率,使其成为最具发展前途的薄膜太阳能电池。CdS和CdTe膜层的质量对CdTe薄膜太阳能电池的性能有很大影响,如何完善CdS和CdTe的制备技术,获得高质量的膜层,引起了广泛关注。笔者综述了影响CdS和CdTe质量的关键制备因素,提出了一些新的制备方法。 相似文献
14.
15.
16.
太阳电池缺陷EL检测及电性能分析 总被引:1,自引:0,他引:1
基于电致发光(EL)的理论,利用红外检测的方法,通过CCD近红外相机实验检测出晶体硅太阳电池中存在的隐性缺陷,如隐裂、断栅、电阻不均匀、花片等,并将EL图像与可见光下电池图像进行了对比。对存在缺陷的太阳电池进行了伏安特性测试,得出隐裂缺陷对太阳电池伏安特性、填充因子、效率等性能的影响,也证明电致发光技术检测太阳电池缺陷的准确性。 相似文献
17.
18.
Shoji Furukawa Hiroshi Iino Tomohisa Iwamoto Koudai Kukita Shoji Yamauchi 《Thin solid films》2009,518(2):526-529
Dye-sensitized solar cells are expected to be used for future clean energy. Recently, most of the researchers in this field use Ruthenium complex as dye in the dye-sensitized solar cells. However, Ruthenium is a rare metal, so the cost of the Ruthenium complex is very high. In this paper, various dye-sensitized solar cells have been fabricated using natural dye, such as the dye of red-cabbage, curcumin, and red-perilla. As a result, it was found that the conversion efficiency of the solar cell fabricated using the mixture of red-cabbage and curcumin was about 0.6% (light source: halogen lamp), which was larger than that of the solar cells using one kind of dye. It was also found that the conversion efficiency was about 1.0% for the solar cell with the oxide semiconductor film fabricated using polyethylene glycol (PEG) whose molecular weight was 2,000,000 and red-cabbage dye. This indicates that the cost performance (defined by [conversion efficiency]/[cost of dye]) of the latter solar cell (dye: red-cabbage) is larger by more than 50 times than that of the solar cell using Ruthenium complex, even if the effect of the difference between the halogen lamp and the standard light source is taken into account. 相似文献
19.
20.
采用丝网印刷的方式制备了染料敏化太阳能电池的TiO2薄膜光阳极、TiO2-ZnO复合薄膜光阳极以及TiO2/ZnO双层薄膜光阳极,研究了ZnO对TiO2薄膜光阳极的调制改性作用。研究结果表明分别以醋酸锌和ZnO直接掺杂制备的TiO2-ZnO复合薄膜光阳极同未掺杂的TiO2薄膜光阳极相比,以醋酸锌为原料制备的复合薄膜光阳极使电池转换效率提高了1倍,而由于微米量级的ZnO的粒径大,用其作原料制得的复合薄膜光阳极反而使电池的转换效率有所降低。以醋酸锌为原料制备的TiO2/ZnO双层薄膜光阳极同TiO2薄膜光阳极相比,电池转换效率提高了13倍,通过性能优化后电池的转换效率达到4.7%。 相似文献