车载系统GPRS无线数据通信的设计与实现

介绍了GPRS原理和嵌入式实时操作系统Itron.设计并实现了车载系统无线通信模块.给出了CPRS模块的初始化设置方法,探讨了车载机和GPRS网关之间建立PPP连接的流程.实验结果表明,该系统具有良好的性能.     

多任务实时操作系统在数字电视接收机中的应用

介绍了STLite/OS20在有线数字电视接收机(或机顶盒)软件系统中的应用,着重对嵌入式多任务实时操作系统中的主要模块进行了分析,并举例说明了其具体应用.     

基于Motorola G20的GPRS数据传输终端的设计

详细介绍了Motorola G20 GSM/GPRS模块的TCP/IP栈的AT命令,并给出了利用Philip公司的ARM7-TD-MI CPU LPC2132控制此模块,实现串行口/GPRS转换模块的设计过程。     

电动汽车快速充电机监控终端的设计

随着物联网时代的到来,实现对快速充电机的智能远程管理,其监控终端的设计是其中的关键技术。结合单片机STM32和实时操作系统μC/OS?Ⅱ,介绍了快速充电机监控终端的整体设计方案,研究了大功率充电机CAN总线及GPRS数据发送的协议制定及软件设计方法,并对GPRS流量费用进行了经济性分析。结果表明该监控终端保证监控网络工作稳定,实现对充电机的运行状态的监测及其远程管理。     

带有USB的DTU设计

为了实现采用GPRS(通用分组无线电业务)网进行远距离数据传输,采用Cygnal公司的带有USB(通用串行总线)接口的8051F320单片机和西门子公司的GPRS模块MC35研发出一款带有USB接口的DTU(数据终端单元),该款带有USB接口的DTU实现了远距离数据处理和手法数据的功能。文中提供了硬件和软件部分(底层固件和PC机前台软件)的设计方案。     

新一代HDTV有线接收机顶盒软件的研究与实现

研究与实现了需要在新一代HDTV有线接收机顶盒平台上运行的软件系统.介绍了STLite/OS20实时操作系统和机顶盒软件架构,着重阐述了前端控制、节目管理和DVI接口等应用程序的设计.     

基于GPRS网络技术的计量数据信息系统设计与应用

基于GPRS无线网络通讯技术,应用DTU通讯模块,设计了企业计量数据管理信息系统,给出了系统的功能设计、软硬件配置,实现了计量数据的远程采集及信息化管理。     

基于GPRS数据传输智能终端的实现

介绍了利用单片机控制GPRS调制解调器模块实现GSM网络GPRS业务数据接入的智能终端系统,详细介绍了系统的硬件电路实现、单片机与GPRS模块的接口方式,以及嵌入式TCP/IP协议在本系统中的应用和实现。     

嵌入式实时操作系统μC/OS一Ⅱ

本文简要介绍了嵌入式实时操作系统μC/OS一Ⅱ的特点和基本的系统组成,同时提出了在Pc机上运行μC/OS一Ⅱ时需要注意的一些问题.     

基于GPRS的电力远程抄表系统的设计

提出了采用GPRS/CDMA进行远程数据采集的思路,采用先进成熟的DTU模块为远程数传模块,依托稳定、可靠的GPRS/CDMA网络,在保证数据传输及时、准确的前提下,将系统运行费用也降低到了最低。通信链路由专业的运营商来维护,避免了用户在使用监测系统的同时,还需要耗费很大精力去维护通信线路等问题,节约了用户的初期建设投资和运行维护费用。     

Resolution Enhancement Technology:Integrated Process Solutions using OPC

DUV lithography, using the 248 nm wavelength, is a viable manufacturing option for devices with features at 130 nm and less. Given the low kl value of the lithography, integrated process development is a necessary method for achieving acceptable process latitude. The application of assist features for rule based OPC requires the simultaneous optimization of the mask, illumination optics and the resist.Described in this paper are the details involved in optimizing each of these aspects for line and space imaging.A reference pitch is first chosen to determine how the optics will be set. The ideal sigma setting is determined by a simple geometrically derived expression. The inner and outer machine settings are determined, in turn,with the simulation of a figure of merit. The maximum value of the response surface of this FOM occurs at the optimal sigma settings. Experimental confirmation of this is shown in the paper.Assist features are used to modify the aerial image of the more isolated images on the mask. The effect that the diffraction of the scattering bars (SBs) has on the image intensity distribution is explained. Rules for determining the size and placement of SBs are also given.Resist is optimized for use with off-axis illumination and assist features. A general explanation of the material' s effect is discussed along with the affect on the through-pitch bias. The paper culminates with the showing of the lithographic results from the fully optimized system.     

Cost-effective test solutions for smart card and other integrated flash applications

From its emergence in the late 1980s as a lower cost alternative to early EEPROM technologies, flash memory has evolved to higher densities and speedsand rapidly growing acceptance in mobile applications.In the process, flash memory devices have placed increased test requirements on manufacturers. Today, as flash device test grows in importance in China, manufacturers face growing pressure for reduced cost-oftest, increased throughput and greater return on investment for test equipment. At the same time, the move to integrated flash packages for contactless smart card applications adds a significant further challenge to manufacturers seeking rapid, low-cost test.     

Theoretical analysis of the relationship between the Brillouin gain coefficient and the strain in the optical-fiber sensors

The relation between the power of the Brillouin signal and the strain is one of the bases of the distributed fiber sensors of temperature and strain. The coefficient of the Bfillouin gain can be changed by the temperature and the strain that will affect the power of the Brillouin scattering. The relation between the change of the Brillouin gain coefficient and the strain is thought to be linear by many researchers. However, it is not always linear based on the theoretical analysis and numerical simulation. Therefore, errors will be caused if the relation between the change of the Brillouin gain coefficient and the strain is regarded as to be linear approximately for measuring the temperature and the strain. For this reason, the influence of the parameters on the Brillouin gain coefficient is proposed through theoretical analysis and numerical simulation.     

An improved parallel thinning algorithm with two subiterations

The parallel thinning algorithm with two subiterations is improved in this paper. By analyzing the notions of connected components and passes, a conclusion is drawn that the number of passes and the number of eight-connected components are equal. Then the expression of the number of eight-connected components is obtained which replaces the old one in the algorithm. And a reserving condition is proposed by experiments, which alleviates the excess deletion where a diagonal line and a beeline intersect. The experimental results demonstrate that the thinned curve is almost located in the middle of the original curve connectivelv with single pixel width and the processing speed is high.     

Novel fiber-optical interferometer with miniaturized probe for in-hole measurements

Today, micro-system technology and the development of new MEMS （Micro-Electro-Mechanical Systems） are emerging rapidly. In order for this development to become a success in the long run, measurement systems have to ensure product quality. Most often, MEMS have to be tested by means of functionality or destructive tests. One reason for this is that there are no suitable systems or sensing probes available which can be used for the measurement of quasi inaccessible features like small holes or cavities. We present a measurement system that could be used for these kinds of measurements. The system combines a fiber optical, miniaturized sensing probe with low-coherence interferometry, so that absolute distance measurements with nanometer accuracy are possible.     

Study of waveguide coupling efficiency in hybrid silicon lasers

This paper presents a new method to increase the waveguide coupling efficiency in hybrid silicon lasers. We find that the propagation constant of the InGaAsP emitting layer can be equal to that of the Si resonant layer through improving the design size of the InP waveguide. The coupling power achieves 42% of the total power in the hybrid lasers when the thickness of the bonding layer is 100 nm. Our result is very close to 50% of the total power reported by Intel when the thickness of the thin bonding layer is less than 5 nm. Therefore, our invariable coupling power technique is simpler than Intel＇s.     

Teleportation of an arbitrary unknown N-qubit entangled state under the controlling of M controllers

A new quantum protocol to teleport an arbitrary unknown N-qubit entangled state from a sender to a fixed receiver under M controllers(M < N) is proposed. The quantum resources required are M non-maximally entangled Greenberger-Home-Zeilinger (GHZ) state and N-M non-maximally entangled Einstein-Podolsky-Rosen (EPR) pairs. The sender performs N generalized Bell-state measurements on the 2N particles. Controllers take M single-particle measurement along x-axis, and the receiver needs to introduce one auxiliary two-level particle to extract quantum information probabilistically with the fidelity unit if controllers cooperate with it.     

Diode-end-pumped Nd:YVO4/LBO lasers with 4.2W continuous-wave output at 457 nm

A continuous-wave (CW) 457 nm blue laser operating at the power of 4.2 W is demonstrated by using a fiber coupled laser diode module pumped Nd: YVO4 and using LBO as the intra-cavity SHG crystal With the optimization of laser cavity and crystal parameters, the laser operates at a very high efficiency. When the pumping power is about 31 W, the output at 457nm reaches 4.2 W, and the optical to optical conversion efficiency is about 13.5% accordingly. The stability of the out putpower is better than 1.2% for 8 h continuously working.     

A rigorous proof of MIMO channel capacity’s increase with antenna number

It is well known that adding more antennas at the transmitter or at the receiver may offer larger channel capacity in the multiple-input multiple-output（MIMO） communication systems. In this letter, a simple proof is presented for the fact that the channel capacity increases with an increase in the number of receiving antennas. The proof is based on the famous capacity formula of Foschini and Gans with matrix theory.     

Call for Papers

正Wireless Body-area Networks The last decade has witnessed the convergence of three giant worlds:electronics,computer science and telecommunications.The next decade should follow this convergence in most of our activities with the generalization of sensor networks.In particular with the progress in medicine,people live longer and the aging of population will push the development of wireless personal networks