Dielectric and piezoelectric properties of La2O3 doped (Bi0.5Na0.5)0.92(Ba0.8Sr0.2)0.08 TiO3 lead-free piezoelectric ceramics

Lead-free piezoelectric ceramics (Bi_0.5Na_0.5)_0.92(Ba_0.8Sr_0.2)_0.08 TiO₃+x mol% La₂O₃(x = 0, 0.1, 0.3, 0.5, 0.8) were synthesized by conventional solid state reaction. The crystal structure of all compositions is mono-perovskite ascertained by XRD. The grain size decreased and diffuse phase transition behavior was more evident with the increasing amount of La₂O₃. The piezoelectric constant d₃₃ and the electromechanical coupling factor k_p showed the maximum value of 165 pC/N and 0.322 at 0.3% and 0.1% La₂O₃ addition, respectively, and rapidly decreased when La₂O₃ addition over 0.5%. The loss tangent tanδ linearly increased and the mechanical quality factor Q_m linearly decreased with the increasing amount of La₂O₃.     

Normal sintering and electric properties of (K,Na,Li)(Nb,Sb)O3 lead-free piezoelectric ceramics

0.94(K₀₅Na_0.5)NbO₃?0.03LiNbO₃?0.03LiSbO₃ (KNLNS) lead-free piezoelectric ceramics were prepared by conventional mixed oxide route with normal sintering method. The samples were sintered at different temperatures with KNLNS powder atmosphere to prevent volatilization of alkali metal oxides at high temperature. The effects of sintering temperature on the density, structure and electric properties of KNLNS ceramics were studied. X-ray diffraction (XRD) results showed that the crystal structure of the crushed KNLNS ceramic powders were pure perovskite phase with tetragonal phase structure when sintered at T????1080°C. However a K₃Li₂Nb₅O₁₅ phase with tetragonal tungsten bronze structure began to appear when the sintering temperature was higher than 1080°C. The optimum sintering temperature was 1080°C which was determined by measuring the density of the samples. Scanning electron microscope (SEM) observation indicated that the sintering temperature had a great effect on the microstructure of the samples. The KNLNS ceramics under the optimum sintering temperature showed excellent electric properties: ???=?4.29 g/cm³, ?? _r?=?826, tan???=?0.049, d ₃₃?=?190 pC/N, k _p?=?0.30, and T _c?=?385°C. The results show that the KNLNS ceramics are promising candidate for lead-free piezoelectric ceramics.     

Piezoelectric properties of (Na0.465K0.465Bi0.07)(Nb0.93Ti0.07)O3 ceramics with MnO2 addition

In this study, (Na_0.465K_0.465Bi_0.07)(Nb_0.93Ti_0.07)O₃ ceramics with MnO₂ addition were prepared by conventional mixed oxide method. The effects of MnO₂ addition on the structural and electrical properties of the specimens were investigated for the application of piezoelectric devices. As the results of X-ray diffraction analysis, all specimens showed the typical polycrystalline perovskite structure without presence of the second phase. Sintered densities increased with increasing the addition amount of MnO₂ and the specimen added with 0.06 mol% of MnO₂ showed the maximum value of 4.87 g/cm³. Average grain size increased and densification increased with an increasing of MnO₂ contents. The electromechanical coupling factor, dielectric constant, dielectric loss, d₃₃ and Curie temperature of the 0.06 mol% of MnO₂ doped (Na_0.465K_0.465Bi_0.07)(Nb_0.93Ti_0.07)O₃ specimens were 0.32, 1309, 0.016, 122 and 465 °C, respectively.     

Dielectric and piezoelectric properties of KCT added (Li0.02(Na0.56 K0.46)0.98(Nb0.81Ta0.15Sb0.04)O3 ceramics

In this study, [Li_0.02(Na_0.56 K_0.46)_0.98](Nb_0.81Ta_0.15Sb_0.04)O₃ + x mol% K_5.4Cu_1.3Ta₁₀O₂₉ ceramics were fabricated by conventional solid-state solution processes. Then, their dielectric and piezoelectric properties were investigated. Sinterability of all samples was enhanced because K_5.4Cu_1.3Ta₁₀O₂₉ (abbreviated as KCT) acted as sintering aids. As the result of XRD, phase structure showed orthorhombic symmetry when KCT ≤ 0.2 mol%. Whereas, the phase structure changed from orthorhombic symmetry to tetragonal symmetry when KCT?≥?0.4 mol%. The results suggest that the orthorhombic and tetragonal phases co-exist in the composition ceramics with 0.2 mol% < KCT < 0.4 mol% at room temperature. The effects of the addition of KCT on the dielectric and piezoelectric properties were investigated. As the result, excellent properties of density=4.81[g/cm³], electromechanical coupling factor (k_p)=0.48 and piezoelectric constant(d₃₃)=252[pC/N] were obtained in the composition ceramics with 0.4 mol%KCT.     

Pyroelectric, dielectric, and piezoelectric properties of MnO2-doped (Na0.82 K0.18)0.5Bi0.5TiO3 lead-free ceramics

MnO₂ doped (Na_0.82 K_0.18)_0.5Bi_0.5TiO₃ lead-free piezoelectric ceramics were prepared by conventional solid-state reaction process and the effect of MnO₂ addition on the pyroelectric, piezoelectric and dielectric properties were studied. The experiment results showed that the pyroelectric, piezoelectric, and dielectric properties strongly depended on MnO₂ addition in the (Na_0.82 K_0.18)_0.5Bi_0.5TiO₃ ceramics. Excellent electrical properties were obtained in (Na_0.82 K_0.18)_0.5Bi_0.5TiO₃ with 0.8?mol% MnO₂. The large dielectric loss of pure BNT ceramics was significantly reduced, the piezoelectric constant was improved, and it also showed excellent pyroelectric properties when compared with other lead free ceramics, with pyroelectric coefficient p?=?17?×?10^?4?C/m²K and figure of merit F _d ?=?6.56?×?10^?5?Pa^?0.5. With these outstanding pyroelectric properties, the 0.8?mol% MnO₂ doped (Na_0.82 K_0.18)_0.5Bi_0.5TiO₃ ceramic can be a promising material for pyroelectric sensor applications in future.     

Microstructure and electrical properties of the rare-earth doped 0.94Na0.5Bi0.5TiO3-0.06BaTiO3 piezoelectric ceramics

Phase structure, microstructure, piezoelectric and dielectric properties of the 0.4 wt% Ce doped 0.94Bi_0.5Na_0.5TiO₃-0.06BaTiO₃ (Ce-BNT6BT) ceramics sintered at different temperatures have been investigated. The powder X-ray diffraction patterns showed that all of the Ce-BNT6BT ceramics exhibited a single perovskite structure with the co-existence of the rhombohedral and tetragonal phase. The morphologies of inside and outside of the bulk indicated that the different sintering temperatures did not cause the second phase on the inside of bulk. However, the TiO₂ existed on the outside of the bulk due to the Bi₂O₃ and Na₂O volatilizing at higher temperature. The ceramics sintered at 1,200 °C showed a relatively large remnant polarization (P _r) of about 34.2 μC/cm², and a coercive field (E _c) of about 22.6 kV/cm at room temperature. The permittivity ? _r of the ceramics increased with the increasing of sintering temperature in antiferroelectric region, the depolarization temperature (T _d) increased below 1,160 °C then decreased at higher sintering temperature. The resistivity (ρ) of the Ce-BNT6BT ceramics increased linearly as the sintering temperature increased below 1,180 °C, but reduced as the sintering temperature increased further. A maximum value of the ρ was 3.125?×?10¹⁰ ohm m for the Ce-BNT6BT ceramics sintered at 1,180 °C at room temperature.     

Enhanced physical properties of Bi 4 Ti 3 O 12 modified Bi 0.5 (Na 0.4 K 0.1 )TiO 3 lead-free piezoelectric ceramics using crystallographic orientation techniques

In this study, bismuth titanate (Bi4Ti3O12) templates were synthesized through the molten salt method in Na2CO3 and K2CO3 fluxes. The prepared Bi4Ti3O12 te     

Structure and dielectric properties of Cu and (K,Na) doped SrBi2Nb2O9 ferroelectric ceramics

Ferroelectric ceramics, SrBi₂Nb₂O₉ (SBN), Sr_0.8Cu_0.2Bi₂Nb₂O₉ (SCBN) and Sr_0.8K_0.1Na_0.1Bi₂Nb₂O₉ (SKNBN) were prepared by a solid state reaction process. X-ray diffraction analysis shows that the alkali and Cu almost diffuse into the SBN lattice to form a solid solution during sintering and some slight secondary phases was detected. The effect of alkali and Cu on dielectric properties of the SBN ceramics was discussed. The dielectric loss factor of (K,Na) doped SBN ceramics degraded considerably to 0.01 and their frequency and temperature stabilities were enhanced. The dielectric constant was enhanced by approximately 60% and the Curie temperature (Tc) was also improved for Cu doped SrBi₂Nb₂O₉ ceramics.     

Preparation,characterisation, and electrical properties of (K0.5Na0.5)NbO3 lead-free piezoelectric ceramics

Na_0.5?K_0.5NbO₃ (KNN) ceramics were sintered at different temperatures (970 °C, 1000 °C, 1030 °C, 1060 °C, and 1090 °C) for 3 h by a pressureless sintering method. The powders had been synthesised by sol–gel method, using citric acid as a coordination agent and ethylene glycol as an esterifying agent. The effects of temperature on the phase, microstructure, dielectric, ferroelectric, and piezoelectric properties of the as-prepared ceramics were analysed. The results revealed that all of the ceramics had a pure perovskite phase with orthorhombic symmetry. The piezoelectric constant (d ₃₃), the relative dielectric constant (ε _r), the planar electromechanical coupling coefficient (K _p), and the remnant polarization (P _r) initially increased and then decreased with increasing of temperature in such KNN ceramics. The volatilization of sodium and potassium increased with increasing sintering temperature. Over the range of temperatures studied, those ceramics sintered at 1060 °C had the following optimal properties: (ρ?=?3.97 g/cm³, d ₃₃?=?119 pC/N, ε _r?=?362.46, tan δ?=?0.05, K _p?=?0.23, P _r?=?11.97 μC/cm², E _c?=?10.35 kV/cm, and T _c?=?408 °C).     

Piezoelectric and ferroelectric properties of textured (Na0.50K0.47Li0.03)(Nb0.8Ta0.2)O3 ceramics by using template grain growth method

(Na_0.50K_0.47Li_0.03)(Nb_0.8Ta_0.2)O₃ ceramics were fabricated by tape casting technique and template grain growth method with sintering additives. The Li and Mn 1 mol% sintering additives are highly efficient for textured grain growth method in (Na_0.50K_0.47Li_0.03)(Nb_0.8Ta_0.2)O₃ ceramics. Grains are well-oriented and piezoelectric coefficient d ₃₃ is 310 pC/N. Piezoelectric coefficients d ₃₃ are proportional to the grain orientations in ceramics prepared by various methods. Ferroelectric phase transition temperature is increased in oriented ceramics. Ferroelectric polarization is decreased but coercive field is increased in the oriented ceramics.     

Effect of sintering temperature on piezoelectric and dielectric properties of 0.98(Na0.5K0.5)NbO3-0.02Li(Sb0.17Ta0.83)O3+0.01wt%ZnO ceramics

We studied sintering temperature to enhance the piezoelectric and dielectric properties of 0.98(Na_0.5?K_0.5)NbO₃-0.02Li(Sb_0.17Ta_0.83)O₃?+?0.01wt%ZnO (hereafter NKN-LST+ZnO) lead free piezoelectric ceramics. The synthesis and sintering method were the conventional ceramic technique and sintering was executed at 1080?～?1120°C. We found that optimal sintering temperature and NKN-LST+ZnO ceramics showed the highest piezoelectric properties and dielectric properties at the optimal sintering temperature. The NKN-LST+ZnO ceramics sintered at 1090°C show a superior performance with piezoelectric constant d ₃₃?=?185 pC/N, k _p?=?0.36, ε ₃₃ ^T /ε₀?=?491 respectively. These results reveal that NKN-LST+ZnO ceramics are promising candidate materials for lead-free piezoelectric application.     

Effect of BiAlO3 concentration on the dielectric and piezoelectric properties of lead-free (Bi0.5Na0.5)0.94Ba0.06TiO3 piezoelectric ceramics

In this paper, lead-free (1-x)(Bi_0.5Na_0.5)_0.94Ba_0.06TiO₃-xBiAlO₃ (BNBT-BA, x?=?0, 0.010, 0.015, 0.020, 0.025, and 0.030) piezoelectric ceramics were synthesized using a conventional solid-state reaction method. The effect of BiAlO₃ concentration on dielectric, ferroelectric and piezoelectric properties were investigated. The ferroelectric and piezoelectric properties of BNBT ceramics are significantly influenced by the presence of BA. In the composition range studied, X-ray diffraction revealed a perovskite phase with the coexistence of rhombohedral and tetragonal phases. The temperature dependence of dielectric properties showed that the depolarization temperature (T _d) shifted towards lower temperatures and that the degree of diffuseness of the phase transition around T _d and T _m became more obvious with increasing BiAlO₃ content. The remanent polarization increased with increasing BA, and reached a maximum value of 30 μC/cm² at x?=?0.020. As a result, at x?=?0.020, the piezoelectric constant (d ₃₃) and the electromechanical coupling factor (k _p) of the ceramics attained maximum values of 188 pC/N and 34.4 %, respectively. These results indicate that BNBT-BA ceramics is a promising candidate for lead-free piezoelectric materials.     

Effect of SmAlO3 doping on the properties of (1-x)(K0.44Na0.52Li0.04)(Nb0.91Ta0.05Sb0.04)O3 lead-free ceramics

Journal of Electroceramics - (1-x)(K0.44Na0.52Li0.04)(Nb0.91Ta0.05Sb0.04)O3-xSmAlO3 (abbreviated as KNLNTS-xSA) (x?=?0.000, 0.001, 0.004 and 0.008) lead-free ceramics were prepared by...     

Effect of attrition milling on the piezoelectric properties of Bi0.5Na0.5TiO3-based ceramics

Bismith sodium titanate (BNT)-based powders were prepared by conventionally mixed-oxide method using Bi₂O₃, Na₂CO₃ and TiO₂. The La₂O₃ was added as the modifier to the BNT composition for easily poling and reducing an abnormal dielectric loss at high temperatures. In this study, the investigated compositions were Bi_0.5Na_0.5TiO₃ and Bi_0.5Na_0.485La_0.005TiO₃. The powders were calcined at 900 °C for 2 h by slow heating rate at 100 °C/h. The calcined BNT-based powders were then attrition-milled for 3 h with a high speed at 350 rpm. After drying, the fine powders were uniaxially pressed and then cold-isostatically pressed (CIP) at 240 MPa for 10 min. All pressed pellets were sintered at 1000–1100 °C for 2 h in air atmosphere. The microstructure of sintered pellets was investigated by SEM. Results of dielectric and piezoelectric property measurement were also reported.     

Synthesis and piezoelectric properties of [Bi1-z(Na1-x-y-zKxLiy)]0.5BazTiO3 lead-free piezoelectric ceramics

[Bi_1-z(Na_1-x-y-zK_xLi_y)]_0.5Ba_zTiO₃ lead-free piezoelectric ceramics were fabricated by ordinary ceramic technique and the piezoelectric and ferroelectric properties of the ceramics were studied. The ceramics can be well sintered at 1,100–1,150 °C for 2 h. X-ray diffraction (XRD) analysis shows that K⁺, Li⁺ and Ba²⁺ diffuse into the Bi_0.5Na_0.5TiO₃ lattices to form a solid solution with a single-phase perovskite structure. The introduction of K⁺, Li⁺ and Ba²⁺ into Bi_0.5Na_0.5TiO₃ significantly decreases the coercive field E _c but maintains the large remanent polarization P _r of the materials. The ceramics provide piezoelectric constant d ₃₃ of 205 pC/N, electromechanical coupling factor k _p of 0.346, remanent polarization P _r of 31.7–38.5 μC/cm², and coercive field E _c of 3.18–5.16 kV/mm.     

Effect of La3+ substitution on microwave dielectric properties of (Pb0.5Ca0.5)(Fe0.5Nb0.5)O3 ceramics

Microwave dielectric properties of the [(Pb_0.5Ca_0.5)_1?x La_2x/3](Fe_0.5Nb_0.5)O₃ and [(Pb_0.5Ca_0.5)_1?x La _x ](Fe_0.5Nb_0.5)O₃ ceramics were investigated as a function of La³⁺ content $ {\left( {0.0 \leqslant \times \leqslant 0.2} \right)} $ . A single perovskite phase was detected in [(Pb_0.5Ca_0.5)_1?x La_2x/3](Fe_0.5Nb_0.5)O₃, while Pb₃Nb₄O₁₃ were detected as a secondary phase in [(Pb_0.5Ca_0.5)_1?x La _x ](Fe_0.5Nb_0.5)O₃ beyond x?=?0.05 due to the excess of unbalanced charge. The amount of Pb₃Nb₄O₁₃ was proportional to the unbalanced charge. Qf value of [(Pb_0.5Ca_0.5)_1?x La_2x/3](Fe_0.5Nb_0.5)O₃ decreased remarkably with La³⁺ substitution due to the increase of oxygen vacancy. For [(Pb_0.5Ca_0.5)_1?x La _x ](Fe_0.5Nb_0.5)O₃ ceramics, dielectric constant and Qf value increased with La³⁺ content up to x?=?0.03 due to an increase of density and grain size. Temperature coefficient of resonant frequency (TCF) was depended on B-site bond valence in single perovskite phase.     

The effect of Bi4Ti3O12 particles addition in lead-free Bi0.5(Na0.75K0.25)0.5TiO3 ceramics

We studied the effect of Bi₄Ti₃O₁₂ (BiT) platelet addition in Bi_0.5(Na_0.75K_0.25)_0.5TiO₃ (BNKT) ceramics by preparing two kinds of BNKT ceramics. One type of BNKT ceramic was fabricated by a conventional solid state reaction method (normal sample), while the other by addition of 15 wt% BiT platelets to BNKT powders (BiT-added sample). In the case of BiT-added BNKT ceramics, plate like grains were formed by the reaction of BiT platelets with Na₂CO₃, K₂CO₃, and TiO₂ during the sintering process. The grain size of BiT-added BNKT ceramics was 10 times larger than that of normal BNKT ceramic. The piezoelectric strain and d₃₃ values of BiT-added BNKT ceramics were 0.135% and 225 pm/V, respectively. These values were 35% higher than those of normal BNKT ceramics. The piezoelectric properties of BiT-added BNKT ceramics were enhanced by the higher domain activity due to a decrease in domain density at larger grain sizes.     

Structure and dielectric property of Zr-doped (Na0.47Bi0.46Ba0.06K0.01)(Nb0.02Ti0.98)O3 lead-free ceramics

(Na_0.47Bi_0.46Ba_0.06K_0.01)(Nb_0.02Ti_0.98-xZr_x)O₃ lead-free ceramics (BNBKT-xZr, x?=?0, 0.01, 0.02, 0.04) were synthesized via conventional solid state reaction method. Crystallite structure of the ceramics was studied using X-ray diffraction. The rhombohedral phase and tetragonal phase coexist in the BNBKT-xZr ceramics. The doping of Zr⁴⁺ into BNBKT lattice increases the percentage of the tetragonal phase. The size and shape of grains in the ceramics were affected by the doping of Zr⁴⁺ ions. For all the unpoled ceramics, two dielectric anomalies are observed in the dielectric constant-temperature curves. The maximum values of dielectric constant and corresponding temperatures change with the variation of Zr⁴⁺ amount. The doping of Zr⁴⁺ ions causes a decrease in the ferroelectric properties.     

Piezoelectric properties and dielectric behavior of Bi1/2Na1/2[Ti1−x (Sb1/2Nb1/2) x ]O3 lead-free piezoelectric ceramics

New lead-free piezoelectric ceramics of ABO₃ perovskite type, Bi_1/2Na_1/2[Ti_1−x (Sb_1/2Nb_1/2) _x ]O₃, were synthesized by conventional solid state reaction. The effect of the replacement of complex ions of (Sb_1/2Nb_1/2)⁴⁺ in the B cationic site on structural and electrical properties was investigated. The XRD analysis showed that all samples exhibited a single phase of perovskite structure. Piezoelectric and dielectric measurement revealed that the substitution of (Sb_1/2Nb_1/2)⁴⁺ ions lead to an increase in piezoelectric constant(d ₃₃), electromechanical coupling factor(k _t), relative dielectric constant(ɛ _r),and loss tangent (tanδ), while excess of (Nb_1/2Sb_1/2)⁴⁺ ions results in a decrease in d ₃₃, k _t, ɛ _r, but an increase in tanδ. Temperature dependence of dielectric constant ɛ _r measurement indicated these compounds were relaxor ferroelectric. At low frequency and high temperature, dielectric constant increased sharply attributed to the superparaelectric clusters after (Sb_1/2Nb_1/2)⁴⁺ ions substitution.     

Characteristic of grain oriented (Bi0.5Na0.5)TiO3-BaTiO3 ceramics

Dielectric and piezoelectric properties of grain oriented (Bi_0.5Na_0.5)TiO₃-BaTiO₃ ceramics were investigated in a process that the templated grain growth and hot pressing methods were employed. A ceramic composition in Bi-based perovskite structure family, (Bi_0.5Na_0.5)TiO₃-BaTiO₃, was chosen as a matrix material and plate shaped SrTiO₃ as a template. To examine the combined process effect on piezoelectric properties, three processes, conventional solid reaction, templated grain growth and the combine treatment of templated grain growth and hot-pressing, were compared. Specimen processed by templated grain growth and hot pressing methods exhibited better piezoelectric coefficient, d ₃₁ (−79.6 pC/N) and electromechanical coefficient, k ₃₃ (0.35) than those of the other specimens, fabricated by solid reaction and templated grain growth, respectively. The improved properties were attributed to reduction of pore existing in matrix, which is related to abnormal grain growth from SrTiO₃ template and its resultant heterogeneous shrinkage.