High‐Performance,Room Temperature,Ultra‐Broadband Photodetectors Based on Air‐Stable PdSe2

Photodetection over a broad spectral range is crucial for optoelectronic applications such as sensing, imaging, and communication. Herein, a high‐performance ultra‐broadband photodetector based on PdSe₂ with unique pentagonal atomic structure is reported. The photodetector responds from visible to mid‐infrared range (up to ≈4.05 µm), and operates stably in ambient and at room temperature. It promises improved applications compared to conventional mid‐infrared photodetectors. The highest responsivity and external quantum efficiency achieved are 708 A W^?1 and 82 700%, respectively, at the wavelength of 1064 nm. Efficient optical absorption beyond 8 µm is observed, indicating that the photodetection range can extend to longer than 4.05 µm. Owing to the low crystalline symmetry of layered PdSe₂, anisotropic properties of the photodetectors are observed. This emerging material shows potential for future infrared optoelectronics and novel devices in which anisotropic properties are desirable.     

Near‐Infrared Photodetectors Based on MoTe2/Graphene Heterostructure with High Responsivity and Flexibility

2D transition metal dichalcogenides (TMDCs) have attracted considerable attention due to their impressively high performance in optoelectronic devices. However, efficient infrared (IR) photodetection has been significantly hampered because the absorption wavelength range of most TMDCs lies in the visible spectrum. In this regard, semiconducting 2D MoTe₂ can be an alternative choice owing to its smaller band gap ≈1 eV from bulk to monolayer and high carrier mobility. Here, a MoTe₂/graphene heterostructure photodetector is demonstrated for efficient near‐infrared (NIR) light detection. The devices achieve a high responsivity of ≈970.82 A W^?1 (at 1064 nm) and broadband photodetection (visible‐1064 nm). Because of the effective photogating effect induced by electrons trapped in the localized states of MoTe₂, the devices demonstrate an extremely high photoconductive gain of 4.69 × 10⁸ and detectivity of 1.55 × 10¹¹ cm Hz^1/2 W^?1. Moreover, flexible devices based on the MoTe₂/graphene heterostructure on flexible substrate also retains a good photodetection ability after thousands of times bending test (1.2% tensile strain), with a high responsivity of ≈60 A W^?1 at 1064 nm at V _DS = 1 V, which provides a promising platform for highly efficient, flexible, and low cost broadband NIR photodetectors.     

Atomically Thin Oxyhalide Solar‐Blind Photodetectors

2D wide‐bandgap semiconductors demonstrate great potential in fabricating solar‐blind ultraviolet (SBUV) photodetectors. However, the low responsivity of 2D solar‐blind photodetectors still limits their practical applications. Here, high‐responsivity solar‐blind photodetectors are achieved based on 2D bismuth oxychloride (BiOCl) flakes. The 2D BiOCl photodetectors exhibit a responsivity up to 35.7 A W^?1 and a specific detectivity of 2.2 × 10¹⁰ Jones under 250 nm illumination with 17.8 µW cm^?2 power density. In particular, the enhanced photodetective performances are demonstrated in BiOCl photodetectors with increasing ambient temperature. Surprisingly, their responsivity can reach 2060 A W^?1 at 450 K under solar‐blind light illumination, maybe owing to the formation of defective BiOCl grains evidenced by in situ transmission electron microscopy. The high responsivity throughout the solar‐blind range indicates that 2D BiOCl is a promising candidate for SBUV detection.     

Graphene–Ruthenium Complex Hybrid Photodetectors with Ultrahigh Photoresponsivity

The maximum responsivity of a pure monolayer graphene‐based photodetector is currently less than 10 mA W^?1 because of small optical absorption and short recombination lifetime. Here, a graphene hybrid photodetector functionalized with a photoactive ruthenium complex that shows an ultrahigh responsivity of ≈1 × 10⁵ A W^?1 and a photoconductive gain of ≈3 × 10⁶ under incident optical intensity of the order of sub‐milliwatts is reported. This responsivity is two orders of magnitude higher than the precedent best performance of graphene‐based photodetectors under a similar incident light intensity. Upon functionalization with a 4‐nm‐thick ruthenium complex, monolayer graphene‐based photodetectors exhibit pronounced n‐type doping effect due to electron transfer via the metal?ligand charge transfer (MLCT) from the ruthenium complex to graphene. The ultrahigh responsivity is attributed to the long lifetime and high mobility of the photoexcited charge carriers. This approach is highly promising for improving the responsivity of graphene‐based photodetectors.     

Highly Efficient and Ultrasensitive Large‐Area Flexible Photodetector Based on Perovskite Nanowires

Hybrid organic–inorganic perovskites have shown exceptional semiconducting properties and microstructural versatility for inexpensive, solution‐processable photovoltaic and optoelectronic devices. In this work, an all‐solution‐based technique in ambient environment for highly sensitive and high‐speed flexible photodetectors using high crystal quality perovskite nanowires grown on Kapton substrate is presented. At 10 V, the optimized photodetector exhibits a responsivity as high as 0.62 A W^?1, a maximum specific detectivity of 7.3 × 10¹² cm Hz^1/2 W^?1, and a rise time of 227.2 µs. It also shows remarkable photocurrent stability even beyond 5000 bending cycles. Moreover, a deposition of poly(methyl methacrylate) (PMMA) as a protective layer on the perovskite yields significantly better stability under ambient air operation: the PMMA‐protected devices are stable for over 30 days. This work demonstrates a cost‐effective fabrication technique for high‐performance flexible photodetectors and opens opportunities for research advancements in broadband and large‐scale flexible perovskite‐based optoelectronic devices.     

Superior Performances of Self-Driven Near-Infrared Photodetectors Based on the SnTe:Si/Si Heterostructure Boosted by Bulk Photovoltaic Effect (Small 14/2023)

The upsurge of new materials that can be used for near-infrared (NIR) photodetectors operated without cooling is crucial. As a novel material with a small bandgap of ≈0.28 eV, the topological crystalline insulator SnTe has attracted considerable attention. Herein, this work demonstrates self-driven NIR photodetectors based on SnTe/Si and SnTe:Si/Si heterostructures. The SnTe/Si heterostructure has a high detectivity D* of 3.3 × 10¹² Jones. By Si doping, the SnTe:Si/Si heterostructure reduces the dark current density and increases the photocurrent by ≈1 order of magnitude simultaneously, which improves the detectivity D* by ≈2 orders of magnitude up to 1.59 × 10¹⁴ Jones. Further theoretical analysis indicates that the improved device performance may be ascribed to the bulk photovoltaic effect (BPVE), in which doped Si atoms break the inversion symmetry and thus enable the generation of additional photocurrents beyond the heterostructure. In addition, the external quantum efficiency (EQE) measured at room temperature at 850 nm increases by a factor of 7.5 times, from 38.5% to 289%. A high responsivity of 1979 mA W⁻¹ without bias and fast rising time of 8 µs are also observed. The significantly improved photodetection achieved by the Si doping is of great interest and may provide a novel strategy for superior photodetectors.     

Ultrabroadband MoS2 Photodetector with Spectral Response from 445 to 2717 nm

Photodetectors with excellent detecting properties over a broad spectral range have advantages for the application in many optoelectronic devices. Introducing imperfections to the atomic lattices in semiconductors is a significant way for tuning the bandgap and achieving broadband response, but the imperfection may renovate their intrinsic properties far from the desire. Here, by controlling the deviation from the perfection of the atomic lattice, ultrabroadband multilayer MoS₂ photodetectors are originally designed and realized with the detection range over 2000 nm from 445 nm (blue) to 2717 nm (mid‐infrared). Associated with the narrow but nonzero bandgap and large photoresponsivity, the optimized deviation from the perfection of MoS₂ samples is theoretically found and experimentally achieved aiming at the ultrabroadband photoresponse. By the photodetection characterization, the responsivity and detectivity of the present photodetectors are investigated in the wavelength range from 445 to 2717 nm with the maximum values of 50.7 mA W^?1 and 1.55 × 10⁹ Jones, respectively, which represent the most broadband MoS₂ photodetectors. Based on the easy manipulation, low cost, large scale, and broadband photoresponse, this present detector has significant potential for the applications in optoelectronics and electronics in the future.     

Epitaxial Growth of Large‐Grain NiSe Films by Solid‐State Reaction for High‐Responsivity Photodetector Arrays

Film‐based photodetectors have shown superiority for the fabrication of photodetector arrays, which are desired for integrating photodetectors into sensing and imaging systems, such as image sensors. But they usually possess a low responsivity due to low carrier mobility of the film consisting of nanocrystals. Large‐grain semiconductor films are expected to fabricate superior‐responsivity photodetector arrays. However, the growth of large‐grain semiconductor films, normally with a nonlayer structure, is still challenging. Herein, this study introduces a solid‐state reaction method, in which the growth rate is supposed to be limited by diffusion and reaction rate, for interface‐confined epitaxial growth of nonlayer structured NiSe films with grain size up to micrometer scale on Ni foil. Meanwhile, patterned growth of NiSe films allows the fabrication of NiSe film based photodetector arrays. More importantly, the fabricated photodetector based on as‐grown high‐quality NiSe films shows a responsivity of 150 A W^?1 in contrast to the value of 0.009 A W^?1 from the photodetector based on as‐deposited NiSe film consisting of nanocrystals, indicating a huge responsivity‐enhancement up to four orders of magnitude. It is ascribed to the enhanced charge carrier mobility in as‐grown NiSe films by dramatically decreasing the amount of grain boundary leading to scattering of charge carrier.     

High Detectivity Graphene‐Silicon Heterojunction Photodetector

A graphene/n‐type silicon (n‐Si) heterojunction has been demonstrated to exhibit strong rectifying behavior and high photoresponsivity, which can be utilized for the development of high‐performance photodetectors. However, graphene/n‐Si heterojunction photodetectors reported previously suffer from relatively low specific detectivity due to large dark current. Here, by introducing a thin interfacial oxide layer, the dark current of graphene/n‐Si heterojunction has been reduced by two orders of magnitude at zero bias. At room temperature, the graphene/n‐Si photodetector with interfacial oxide exhibits a specific detectivity up to 5.77 × 10¹³ cm Hz^1/2 W^‐1 at the peak wavelength of 890 nm in vacuum, which is highest reported detectivity at room temperature for planar graphene/Si heterojunction photodetectors. In addition, the improved graphene/n‐Si heterojunction photodetectors possess high responsivity of 0.73 A W^?1 and high photo‐to‐dark current ratio of ≈10⁷. The current noise spectral density of the graphene/n‐Si photodetector has been characterized under ambient and vacuum conditions, which shows that the dark current can be further suppressed in vacuum. These results demonstrate that graphene/Si heterojunction with interfacial oxide is promising for the development of high detectivity photodetectors.     

Solution‐Processed 3D RGO–MoS2/Pyramid Si Heterojunction for Ultrahigh Detectivity and Ultra‐Broadband Photodetection

Molybdenum disulfide (MoS₂), a typical 2D metal dichalcogenide (2DMD), has exhibited tremendous potential in optoelectronic device applications, especially in photodetection. However, due to the weak light absorption of planar mono‐/multilayers, limited cutoff wavelength edge, and lack of high‐quality junctions, most reported MoS₂‐based photodetectors show undesirable performance. Here, a structurized 3D heterojunction of RGO–MoS₂/pyramid Si is demonstrated via a simple solution‐processing method. Owing to the improved light absorption by the pyramid structure, the narrowed bandgap of the MoS₂ by the imperfect crystallinity, and the enhanced charge separation/transportation by the inserted reduced graphene oxide (RGO), the assembled photodetector exhibits excellent performance in terms of a large responsivity of 21.8 A W^?1, extremely high detectivity up to 3.8 × 10¹⁵ Jones (Jones = cm Hz^1/2 W^?1) and ultrabroad spectrum response ranging from 350 nm (ultraviolet) to 4.3 µm (midwave infrared). These device parameters represent the best results for MoS₂‐based self‐driven photodetectors, and the detectivity value sets a new record for the 2DMD‐based photodetectors reported thus far. Prospectively, the design of novel 3D heterojunction can be extended to other 2DMDs, opening up the opportunities for a host of high‐performance optoelectronic devices.     

Flexible and High‐Performance All‐2D Photodetector for Wearable Devices

Emerging novel applications at the forefront of innovation horizon raise new requirements including good flexibility and unprecedented properties for the photoelectronic industry. On account of diversity in transport and photoelectric properties, 2D layered materials have proven as competent building blocks toward next‐generation photodetectors. Herein, an all‐2D Bi₂Te₃‐SnS‐Bi₂Te₃ photodetector is fabricated with pulsed‐laser deposition. It is sensitive to broadband wavelength from ultraviolet (370 nm) to near‐infrared (808 nm). In addition, it exhibits great durability to bend, with intact photoresponse after 100 bend cycles. Upon 370 nm illumination, it achieves a high responsivity of 115 A W^?1, a large external quantum efficiency of 3.9 × 10⁴%, and a superior detectivity of 4.1 × 10¹¹ Jones. They are among the best figures‐of‐merit of state‐of‐the‐art 2D photodetectors. The synergistic effect of SnS's strong light–matter interaction, efficient carrier separation of Bi₂Te₃–SnS interface, expedite carrier injection across Bi₂Te₃–SnS interface, and excellent carrier collection of Bi₂Te₃ topological insulator electrodes accounts for the superior photodetection properties. In summary, this work depicts a facile all‐in‐one fabrication strategy toward a Bi₂Te₃‐SnS‐Bi₂Te₃ photodetector. More importantly, it reveals a novel all‐2D concept for construction of flexible, broadband, and high‐performance photoelectronic devices by integrating 2D layered metallic electrodes and 2D layered semiconducting channels.     

Demonstration of a Broadband Photodetector Based on a Two-Dimensional Metal–Organic Framework

Metal–organic frameworks (MOFs) are emerging as an appealing class of highly tailorable electrically conducting materials with potential applications in optoelectronics. Yet, the realization of their proof-of-concept devices remains a daunting challenge, attributed to their poor electrical properties. Following recent work on a semiconducting Fe₃(THT)₂(NH₄)₃ (THT: 2,3,6,7,10,11-triphenylenehexathiol) 2D MOF with record-high mobility and band-like charge transport, here, an Fe₃(THT)₂(NH₄)₃ MOF-based photodetector operating in photoconductive mode capable of detecting a broad wavelength range from UV to NIR (400–1575 nm) is demonstrated. The narrow IR bandgap of the active layer (≈0.45 eV) constrains the performance of the photodetector at room temperature by band-to-band thermal excitation of charge carriers. At 77 K, the device performance is significantly improved; two orders of magnitude higher voltage responsivity, lower noise equivalent power, and higher specific detectivity of 7 × 10⁸ cm Hz^1/2 W⁻¹ are achieved under 785 nm excitation. These figures of merit are retained over the analyzed spectral region (400–1575 nm) and are commensurate to those obtained with the first demonstrations of graphene- and black-phosphorus-based photodetectors. This work demonstrates the feasibility of integrating conjugated MOFs as an active element into broadband photodetectors, thus bridging the gap between materials' synthesis and technological applications.     

Gradient Energy Band Driven High‐Performance Self‐Powered Perovskite/CdS Photodetector

Self‐powered photodetectors are highly desired to meet the great demand in applications of sensing, communication, and imaging. Manipulating the carrier separation and recombination is critical to achieve high performance. In this paper, a self‐powered photodetector based on the integrated gradient O‐doped CdS nanorod array and perovskite is presented. Through optimizing the degree of continuous built‐in band bending in the gradient‐O CdS, the photodetector demonstrates a remarkable detectivity of 2.1 × 10¹³ Jones. Under the self‐powered voltage mode, the responsivity can be as high as 0.48 A W^?1, and the rise and decay time are 0.54/2.21 ms. The comprehensive performance is comparable and even better than reported perovskite and other types of self‐powered photodetectors. The improved mechanism reveals that the gradient band bending promotes the photogenerated carrier transfer and hinders the recombination at the interface.     

A Highly Responsive Organic Image Sensor Based on a Two‐Terminal Organic Photodetector with Photomultiplication

Highly responsive organic image sensors are crucial for medical imaging applications. To enhance the pixelwise photoresponse in an organic image sensor, the integration of an organic photodetector with amplifiers, or the use of a highly responsive organic photodetector without an additional amplifying component, is required. The use of vertically stacked, two‐terminal organic photodetectors with photomultiplication is a promising approach for highly responsive organic image sensors owing to their simple two‐terminal structure and intrinsically large responsivity. However, there are no demonstrations of an imaging sensor array using organic photomultiplication photodetectors. The main obstacle to a sensor array is the weak‐light sensitivity, which is limited by a relatively large dark current. Herein, a highly responsive organic image sensor based on monolithic, vertically stacked two‐terminal pixels is presented. This is achieved using pixels of a vertically stacked diode‐type organic photodetector with photomultiplication. Furthermore, applying an optimized injection electrode and additionally stacked rectifying layers, this two‐terminal device simultaneously demonstrates a high responsivity (>40 A W^?1), low dark current, and high rectification under illumination. An organic image sensor based on this device with an extremely simple architecture exhibits a high pixel photoresponse, demonstrating a weak‐light imaging capability even at 1 µW cm^?2.     

Flexible Broadband Graphene Photodetectors Enhanced by Plasmonic Cu3−xP Colloidal Nanocrystals

The integration of graphene with colloidal quantum dots (QDs) that have tunable light absorption affords new opportunities for optoelectronic applications as such a hybrid system solves the problem of both quantity and mobility of photocarriers. In this work, a hybrid system comprising of monolayer graphene and self‐doped colloidal copper phosphide (Cu_3?x P) QDs is developed for efficient broadband photodetection. Unlike conventional PbS QDs that are toxic, Cu_3?x P QDs are environmental friendly and have plasmonic resonant absorption in near‐infrared (NIR) wavelength. The half‐covered graphene with Cu_3?x P nanocrystals (NCs) behaves as a self‐driven p–n junction and shows durable photoresponse in NIR range. A comparison experiment reveals that the surface ligand attached to Cu_3?x P NCs plays a key role in determining the charge transfer efficiency from Cu_3?x P to graphene. The most efficient three‐terminal photodetectors based on graphene‐Cu_3?x P exhibit broadband photoresponse from 400 to 1550 nm with an ultrahigh responsivity (1.59 × 10⁵ A W^?1) and high photoconductive gain (6.66 × 10⁵) at visible wavelength (405 nm), and a good responsivity of 9.34 A W^?1 at 1550 nm. The demonstration of flexible graphene‐Cu_3?x P photodetectors operated at NIR wavelengths may find potential applications in optical sensing, biological imaging, and wearable devices.     

A Black Phosphorus Carbide Infrared Phototransistor

Photodetectors with broadband detection capability are desirable for sensing applications in the coming age of the internet‐of‐things. Although 2D layered materials (2DMs) have been actively pursued due to their unique optical properties, by far only graphene and black arsenic phosphorus have the wide absorption spectrum that covers most molecular vibrational fingerprints. However, their reported responsivity and response time are falling short of the requirements needed for enabling simultaneous weak‐signal and high‐speed detections. Here, a novel 2DM, black phosphorous carbide (b‐PC) with a wide absorption spectrum up to 8000 nm is synthesized and a b‐PC phototransistor with a tunable responsivity and response time at an excitation wavelength of 2004 nm is demonstrated. The b‐PC phototransistor achieves a peak responsivity of 2163 A W^?1 and a shot noise equivalent power of 1.3 fW Hz^?1/2 at 2004 nm. In addition, it is shown that a response time of 0.7 ns is tunable by the gating effect, which renders it versatile for high‐speed applications. Under the same signal strength (i.e., excitation power), its performance in responsivity and detectivity in room temperature condition is currently ahead of recent top‐performing photodetectors based on 2DMs that operate with a small bias voltage of 0.2 V.     

Hydrogen Terminated Germanene for a Robust Self‐Powered Flexible Photoelectrochemical Photodetector

As a rising star in the family of graphene analogues, germanene shows great potential for electronic and optical device applications due to its unique structure and electronic properties. It is revealed that the hydrogen terminated germanene not only maintains a high carrier mobility similar to that of germanene, but also exhibits strong light–matter interaction with a direct band gap, exhibiting great potential for photoelectronics. In this work, few‐layer germanane (GeH) nanosheets with controllable thickness are successfully synthesized by a solution‐based exfoliation–centrifugation route. Instead of complicated microfabrication techniques, a robust photoelectrochemical (PEC)‐type photodetector, which can be extended to flexible device, is developed by simply using the GeH nanosheet film as an active electrode. The device exhibits an outstanding photocurrent density of 2.9 µA cm^?2 with zero bias potential, excellent responsivity at around 22 µA W^?1 under illumination with intensity ranging from 60 to 140 mW cm^?2, as well as short response time (with rise and decay times, t_r = 0.24 s and t_d = 0.74 s). This efficient strategy for a constructing GeH‐based PEC‐type photodetector suggests a path to promising high‐performance, self‐powered, flexible photodetectors, and it also paves the way to a practical application of germanene.     

Perovskite/Organic Bulk‐Heterojunction Integrated Ultrasensitive Broadband Photodetectors with High Near‐Infrared External Quantum Efficiency over 70%

Ultraviolet‐visible‐near infrared (UV‐Vis‐NIR) broadband detection is important for image sensing, communication, and environmental monitoring, yet remains as a challenge in achieving high external quantum efficiency (EQE) in the broad spectrum range. Herein, sensitive broadband integrated photodetectors (PDs) with high EQE levels are reported. The organic bulk‐heterojunction (OBHJ) layer, based on a NIR sensitive organic acceptor, is employed to extend the response spectrum of the perovskite PDs. A key strategy of introducing dual electron transport materials respectively for Vis and NIR regions into the active layer of integrated PDs is applied. Further combined with the proper energy level alignment and reasonable distribution of PC₆₁BM in the active layer, the extraction and transport of photo induced charges in between perovskite and OBHJ is promoted efficiently. The integrated PD with the optimized structure exhibits an EQE mostly beyond 70% in the Vis–NIR region, which is the highest value among the ever reported solution‐processable broadband PDs. The highest responsivity is 0.444 and 0.518 A W^?1 in the Vis and NIR region, respectively. The specific detectivity is beyond 10¹⁰ Jones in the range from 340 to 940 nm, enabling the device to detect weak signals in the UV to NIR broad region.     

Phase‐Engineered Type‐II Multimetal–Selenide Heterostructures toward Low‐Power Consumption,Flexible, Transparent,and Wide‐Spectrum Photoresponse Photodetectors

Phase‐engineered type‐II metal–selenide heterostructures are demonstrated by directly selenizing indium‐tin oxide to form multimetal selenides in a single step. The utilization of a plasma system to assist the selenization facilitates a low‐temperature process, which results in large‐area films with high uniformity. Compared to single‐metal–selenide‐based photodetectors, the multimetal–selenide photodetectors exhibit obviously improved performance, which can be attributed to the Schottky contact at the interface for tuning the carrier transport, as well as the type‐II heterostructure that is beneficial for the separation of the electron–hole pairs. The multimetal–selenide photodetectors exhibit a response to light over a broad spectrum from UV to visible light with a high responsivity of 0.8 A W^?1 and an on/off current ratio of up to 10². Interestingly, all‐transparent photodetectors are successfully produced in this work. Moreover, the possibility of fabricating devices on flexible substrates is also demonstrated with sustainable performance, high strain tolerance, and high durability during bending tests.     

Liquid-Metal Synthesized Ultrathin SnS Layers for High-Performance Broadband Photodetectors

Atomically thin materials face an ongoing challenge of scalability, hampering practical deployment despite their fascinating properties. Tin monosulfide (SnS), a low-cost, naturally abundant layered material with a tunable bandgap, displays properties of superior carrier mobility and large absorption coefficient at atomic thicknesses, making it attractive for electronics and optoelectronics. However, the lack of successful synthesis techniques to prepare large-area and stoichiometric atomically thin SnS layers (mainly due to the strong interlayer interactions) has prevented exploration of these properties for versatile applications. Here, SnS layers are printed with thicknesses varying from a single unit cell (0.8 nm) to multiple stacked unit cells (≈1.8 nm) synthesized from metallic liquid tin, with lateral dimensions on the millimeter scale. It is reveal that these large-area SnS layers exhibit a broadband spectral response ranging from deep-ultraviolet (UV) to near-infrared (NIR) wavelengths (i.e., 280–850 nm) with fast photodetection capabilities. For single-unit-cell-thick layered SnS, the photodetectors show upto three orders of magnitude higher responsivity (927 A W⁻¹) than commercial photodetectors at a room-temperature operating wavelength of 660 nm. This study opens a new pathway to synthesize reproduceable nanosheets of large lateral sizes for broadband, high-performance photodetectors. It also provides important technological implications for scalable applications in integrated optoelectronic circuits, sensing, and biomedical imaging.