Gap‐Mode Surface‐Plasmon‐Enhanced Photoluminescence and Photoresponse of MoS2

2D materials hold great potential for designing novel electronic and optoelectronic devices. However, 2D material can only absorb limited incident light. As a representative 2D semiconductor, monolayer MoS₂ can only absorb up to 10% of the incident light in the visible, which is not sufficient to achieve a high optical‐to‐electrical conversion efficiency. To overcome this shortcoming, a “gap‐mode” plasmon‐enhanced monolayer MoS₂ fluorescent emitter and photodetector is designed by squeezing the light‐field into Ag shell‐isolated nanoparticles–Au film gap, where the confined electromagnetic field can interact with monolayer MoS₂. With this gap‐mode plasmon‐enhanced configuration, a 110‐fold enhancement of photoluminescence intensity is achieved, exceeding values reached by other plasmon‐enhanced MoS₂ fluorescent emitters. In addition, a gap‐mode plasmon‐enhanced monolayer MoS₂ photodetector with an 880% enhancement in photocurrent and a responsivity of 287.5 A W^?1 is demonstrated, exceeding previously reported plasmon‐enhanced monolayer MoS₂ photodetectors.     

Solution‐Processed 3D RGO–MoS2/Pyramid Si Heterojunction for Ultrahigh Detectivity and Ultra‐Broadband Photodetection

Molybdenum disulfide (MoS₂), a typical 2D metal dichalcogenide (2DMD), has exhibited tremendous potential in optoelectronic device applications, especially in photodetection. However, due to the weak light absorption of planar mono‐/multilayers, limited cutoff wavelength edge, and lack of high‐quality junctions, most reported MoS₂‐based photodetectors show undesirable performance. Here, a structurized 3D heterojunction of RGO–MoS₂/pyramid Si is demonstrated via a simple solution‐processing method. Owing to the improved light absorption by the pyramid structure, the narrowed bandgap of the MoS₂ by the imperfect crystallinity, and the enhanced charge separation/transportation by the inserted reduced graphene oxide (RGO), the assembled photodetector exhibits excellent performance in terms of a large responsivity of 21.8 A W^?1, extremely high detectivity up to 3.8 × 10¹⁵ Jones (Jones = cm Hz^1/2 W^?1) and ultrabroad spectrum response ranging from 350 nm (ultraviolet) to 4.3 µm (midwave infrared). These device parameters represent the best results for MoS₂‐based self‐driven photodetectors, and the detectivity value sets a new record for the 2DMD‐based photodetectors reported thus far. Prospectively, the design of novel 3D heterojunction can be extended to other 2DMDs, opening up the opportunities for a host of high‐performance optoelectronic devices.     

Microlandscaping of Au Nanoparticles on Few‐Layer MoS2 Films for Chemical Sensing

Surface modification or decoration of ultrathin MoS₂ films with chemical moieties is appealing since nanointerfacing can functionalize MoS₂ films with bonus potentials. In this work, a facile and effective method for microlandscaping of Au nanoparticles (NPs) on few‐layer MoS₂ films is developed. This approach first employs a focused laser beam to premodify the MoS₂ films to achieve active surface domains with unbound sulfur. When the activated surface is subsequently immersed in AuCl₃ solution, Au NPs are found to preferentially decorate onto the modified regions. As a result, Au NPs can be selectively and locally anchored onto designated regions on the MoS₂ surface. With a scanning laser beam, microlandscapes comprising of Au NPs decorated on laser‐defined micropatterns are constructed. By varying the laser power, reaction time and thickness of the MoS₂ films, the size and density of the NPs can be controlled. The resulting hybrid materials are demonstrated as efficient Raman active surfaces for the detection of aromatic molecules with high sensitivity.     

Au NPs@MoS2 Sub‐Micrometer Sphere‐ZnO Nanorod Hybrid Structures for Efficient Photocatalytic Hydrogen Evolution with Excellent Stability

MoS₂ shows promising applications in photocatalytic water splitting, owing to its uniquely optical and electric properties. However, the insufficient light absorption and lack of performance stability are two crucial issues for efficient application of MoS₂ nanomaterials. Here, Au nanoparticles (NPs)@MoS₂ sub‐micrometer sphere‐ZnO nanorod (Au NPs@MoS₂‐ZnO) hybrid photocatalysts have been successfully synthesized by a facile process combining the hydrothermal method and seed‐growth method. Such photocatalysts exhibit high efficiency and excellent stability for hydrogen production via multiple optical‐electrical effects. The introduction of Au NPs to MoS₂ sub‐micrometer spheres forming a core–shell structure demonstrates strong plasmonic absorption enhancement and facilitates exciton separation. The incorporation of ZnO nanorods to the Au NPs@MoS₂ hybrids further extends the light absorption to a broader wavelength region and enhances the exciton dissociation. In addition, mutual contacts between Au NPs (or ZnO nanorods) and the MoS₂ spheres effectively protect the MoS₂ nanosheets from peeling off from the spheres. More importantly, efficiently multiple exciton separations help to restrain the MoS₂ nanomaterials from photocorrosion. As a result, the Au@MoS₂‐ZnO hybrid structures exhibit an excellent hydrogen gas evolution (3737.4 μmol g^?1) with improved stability (91.9% of activity remaining) after a long‐time test (32 h), which is one of the highest photocatalytic activities to date among the MoS₂ based photocatalysts.     

Enhanced Performance of MoS2 Photodetectors by Inserting an ALD‐Processed TiO2 Interlayer

2D molybdenum disulfide (MoS₂) possesses excellent optoelectronic properties that make it a promising candidate for use in high‐performance photodetectors. Yet, to meet the growing demand for practical and reliable MoS₂ photodetectors, the critical issue of defect introduction to the interface between the exfoliated MoS₂ and the electrode metal during fabrication must be addressed, because defects deteriorate the device performance. To achieve this objective, the use of an atomic layer‐deposited TiO₂ interlayer (between exfoliated MoS₂ and electrode) is reported in this work, for the first time, to enhance the performance of MoS₂ photodetectors. The TiO₂ interlayer is inserted through 20 atomic layer deposition cycles before depositing the electrode metal on MoS₂/SiO₂ substrate, leading to significantly enhanced photoresponsivity and response speed. These results pave the way for practical applications and provide a novel direction for optimizing the interlayer material.     

High Detectivity Graphene‐Silicon Heterojunction Photodetector

A graphene/n‐type silicon (n‐Si) heterojunction has been demonstrated to exhibit strong rectifying behavior and high photoresponsivity, which can be utilized for the development of high‐performance photodetectors. However, graphene/n‐Si heterojunction photodetectors reported previously suffer from relatively low specific detectivity due to large dark current. Here, by introducing a thin interfacial oxide layer, the dark current of graphene/n‐Si heterojunction has been reduced by two orders of magnitude at zero bias. At room temperature, the graphene/n‐Si photodetector with interfacial oxide exhibits a specific detectivity up to 5.77 × 10¹³ cm Hz^1/2 W^‐1 at the peak wavelength of 890 nm in vacuum, which is highest reported detectivity at room temperature for planar graphene/Si heterojunction photodetectors. In addition, the improved graphene/n‐Si heterojunction photodetectors possess high responsivity of 0.73 A W^?1 and high photo‐to‐dark current ratio of ≈10⁷. The current noise spectral density of the graphene/n‐Si photodetector has been characterized under ambient and vacuum conditions, which shows that the dark current can be further suppressed in vacuum. These results demonstrate that graphene/Si heterojunction with interfacial oxide is promising for the development of high detectivity photodetectors.     

Enhanced Photocarrier Generation with Selectable Wavelengths by M‐Decorated‐CuInS2 Nanocrystals (M = Au and Pt) Synthesized in a Single Surfactant Process on MoS2 Bilayers

A facile approach for the synthesis of Au‐ and Pt‐decorated CuInS₂ nanocrystals (CIS NCs) as sensitizer materials on the top of MoS₂ bilayers is demonstrated. A single surfactant (oleylamine) is used to prepare such heterostructured noble metal decorated CIS NCs from the pristine CIS. Such a feasible way to synthesize heterostructured noble metal decorated CIS NCs from the single surfactant can stimulate the development of the functionalized heterostructured NCs in large scale for practical applications such as solar cells and photodetectors. Photodetectors based on MoS₂ bilayers with the synthesized nanocrystals display enhanced photocurrent, almost 20–40 times higher responsivity and the On/Off ratio is enlarged one order of magnitude compared with the pristine MoS₂ bilayers‐based photodetectors. Remarkably, by using Pt‐ or Au‐decorated CIS NCs, the photocurrent enhancement of MoS₂ photodetectors can be tuned between blue (405 nm) to green (532 nm). The strategy described here acts as a perspective to significantly improve the performance of MoS₂‐based photodetectors with the controllable absorption wavelengths in the visible light range, showing the feasibility of the possible color detection.     

A Fermi‐Level‐Pinning‐Free 1D Electrical Contact at the Intrinsic 2D MoS2–Metal Junction

Currently 2D crystals are being studied intensively for use in future nanoelectronics, as conventional semiconductor devices face challenges in high power consumption and short channel effects when scaled to the quantum limit. Toward this end, achieving barrier‐free contact to 2D semiconductors has emerged as a major roadblock. In conventional contacts to bulk metals, the 2D semiconductor Fermi levels become pinned inside the bandgap, deviating from the ideal Schottky–Mott rule and resulting in significant suppression of carrier transport in the device. Here, MoS₂ polarity control is realized without extrinsic doping by employing a 1D elemental metal contact scheme. The use of high‐work‐function palladium (Pd) or gold (Au) enables a high‐quality p‐type dominant contact to intrinsic MoS₂, realizing Fermi level depinning. Field‐effect transistors (FETs) with Pd edge contact and Au edge contact show high performance with the highest hole mobility reaching 330 and 432 cm² V^?1 s^?1 at 300 K, respectively. The ideal Fermi level alignment allows creation of p‐ and n‐type FETs on the same intrinsic MoS₂ flake using Pd and low‐work‐function molybdenum (Mo) contacts, respectively. This device acts as an efficient inverter, a basic building block for semiconductor integrated circuits, with gain reaching 15 at V_D = 5 V.     

Lateral Graphene‐Contacted Vertically Stacked WS2/MoS2 Hybrid Photodetectors with Large Gain

A demonstration is presented of how significant improvements in all‐2D photodetectors can be achieved by exploiting the type‐II band alignment of vertically stacked WS₂/MoS₂ semiconducting heterobilayers and finite density of states of graphene electrodes. The photoresponsivity of WS₂/MoS₂ heterobilayer devices is increased by more than an order of magnitude compared to homobilayer devices and two orders of magnitude compared to monolayer devices of WS₂ and MoS₂, reaching 10³ A W^?1 under an illumination power density of 1.7 × 10² mW cm^?2. The massive improvement in performance is due to the strong Coulomb interaction between WS₂ and MoS₂ layers. The efficient charge transfer at the WS₂/MoS₂ heterointerface and long trapping time of photogenerated charges contribute to the observed large photoconductive gain of ≈3 × 10⁴. Laterally spaced graphene electrodes with vertically stacked 2D van der Waals heterostructures are employed for making high‐performing ultrathin photodetectors.     

Epitaxial Growth of Large‐Grain NiSe Films by Solid‐State Reaction for High‐Responsivity Photodetector Arrays

Film‐based photodetectors have shown superiority for the fabrication of photodetector arrays, which are desired for integrating photodetectors into sensing and imaging systems, such as image sensors. But they usually possess a low responsivity due to low carrier mobility of the film consisting of nanocrystals. Large‐grain semiconductor films are expected to fabricate superior‐responsivity photodetector arrays. However, the growth of large‐grain semiconductor films, normally with a nonlayer structure, is still challenging. Herein, this study introduces a solid‐state reaction method, in which the growth rate is supposed to be limited by diffusion and reaction rate, for interface‐confined epitaxial growth of nonlayer structured NiSe films with grain size up to micrometer scale on Ni foil. Meanwhile, patterned growth of NiSe films allows the fabrication of NiSe film based photodetector arrays. More importantly, the fabricated photodetector based on as‐grown high‐quality NiSe films shows a responsivity of 150 A W^?1 in contrast to the value of 0.009 A W^?1 from the photodetector based on as‐deposited NiSe film consisting of nanocrystals, indicating a huge responsivity‐enhancement up to four orders of magnitude. It is ascribed to the enhanced charge carrier mobility in as‐grown NiSe films by dramatically decreasing the amount of grain boundary leading to scattering of charge carrier.     

Polyaniline/Pt Hybrid Nanofibers: High‐Efficiency Nanoelectrocatalysts for Electrochemical Devices

A simple and facile procedure to synthesize a novel hybrid nanoelectrocatalyst based on polyaniline (PANI) nanofiber‐supported supra‐high density Pt nanoparticles (NPs) or Pt/Pd hybrid NPs without prior PANI nanofiber functionalization at room temperature is demonstrated. This represents a new type of 1D hybrid nanoelectrocatalyst with several important benefits. First, the procedure is very simple and can be performed at room temperature using commercially available reagents without the need for templates and surfactants. Second, ultra‐high density small “bare” Pt NPs or Pt/Pd hybrid NPs are grown directly onto the surface of the PANI nanofiber, without using any additional linker. Most importantly, the present PANI nanofiber‐supported supra‐high density Pt NPs or Pt/Pd hybrid NPs can be used as a signal enhancement element for constructing electrochemical devices with high performance.     

High Detectivity and Transparent Few‐Layer MoS2/Glassy‐Graphene Heterostructure Photodetectors

Layered van der Waals heterostructures have attracted considerable attention recently, due to their unique properties both inherited from individual two‐dimensional (2D) components and imparted from their interactions. Here, a novel few‐layer MoS₂/glassy‐graphene heterostructure, synthesized by a layer‐by‐layer transfer technique, and its application as transparent photodetectors are reported for the first time. Instead of a traditional Schottky junction, coherent ohmic contact is formed at the interface between the MoS₂ and the glassy‐graphene nanosheets. The device exhibits pronounced wavelength selectivity as illuminated by monochromatic lights. A responsivity of 12.3 mA W^?1 and detectivity of 1.8 × 10¹⁰ Jones are obtained from the photodetector under 532 nm light illumination. Density functional theory calculations reveal the impact of specific carbon atomic arrangement in the glassy‐graphene on the electronic band structure. It is demonstrated that the band alignment of the layered heterostructures can be manipulated by lattice engineering of 2D nanosheets to enhance optoelectronic performance.     

Roll‐to‐Roll Production of Layer‐Controlled Molybdenum Disulfide: A Platform for 2D Semiconductor‐Based Industrial Applications

A facile methodology for the large‐scale production of layer‐controlled MoS₂ layers on an inexpensive substrate involving a simple coating of single source precursor with subsequent roll‐to‐roll‐based thermal decomposition is developed. The resulting 50 cm long MoS₂ layers synthesized on Ni foils possess excellent long‐range uniformity and optimum stoichiometry. Moreover, this methodology is promising because it enables simple control of the number of MoS₂ layers by simply adjusting the concentration of (NH₄)₂MoS₄. Additionally, the capability of the MoS₂ for practical applications in electronic/optoelectronic devices and catalysts for hydrogen evolution reaction is verified. The MoS₂‐based field effect transistors exhibit unipolar n‐channel transistor behavior with electron mobility of 0.6 cm² V^?1 s^?1 and an on‐off ratio of ≈10³. The MoS₂‐based visible‐light photodetectors are fabricated in order to evaluate their photoelectrical properties, obtaining an 100% yield for active devices with significant photocurrents and extracted photoresponsivity of ≈22 mA W^?1. Moreover, the MoS₂ layers on Ni foils exhibit applicable catalytic activity with observed overpotential of ≈165 mV and a Tafel slope of 133 mV dec^?1. Based on these results, it is envisaged that the cost‐effective methodology will trigger actual industrial applications, as well as novel research related to 2D semiconductor‐based multifaceted applications.     

Low‐Noise and Large‐Linear‐Dynamic‐Range Photodetectors Based on Hybrid‐Perovskite Thin‐Single‐Crystals

Organic–inorganic halide perovskites are promising photodetector materials due to their strong absorption, large carrier mobility, and easily tunable bandgap. Up to now, perovskite photodetectors are mainly based on polycrystalline thin films, which have some undesired properties such as large defective grain boundaries hindering the further improvement of the detector performance. Here, perovskite thin‐single‐crystal (TSC) photodetectors are fabricated with a vertical p–i–n structure. Due to the absence of grain‐boundaries, the trap densities of TSCs are 10–100 folds lower than that of polycrystalline thin films. The photodetectors based on CH₃NH₃PbBr₃ and CH₃NH₃PbI₃ TSCs show low noise of 1–2 fA Hz^?1/2, yielding a high specific detectivity of 1.5 × 10¹³ cm Hz^1/2 W^?1. The absence of grain boundaries reduces charge recombination and enables a linear response under strong light, superior to polycrystalline photodetectors. The CH₃NH₃PbBr₃ photodetectors show a linear response to green light from 0.35 pW cm^?2 to 2.1 W cm^?2, corresponding to a linear dynamic range of 256 dB.     

A General Method for the Chemical Synthesis of Large‐Scale,Seamless Transition Metal Dichalcogenide Electronics

The capability to directly build atomically thin transition metal dichalcogenide (TMD) devices by chemical synthesis offers important opportunities to achieve large‐scale electronics and optoelectronics with seamless interfaces. Here, a general approach for the chemical synthesis of a variety of TMD (e.g., MoS₂, WS₂, and MoSe₂) device arrays over large areas is reported. During chemical vapor deposition, semiconducting TMD channels and metallic TMD/carbon nanotube (CNT) hybrid electrodes are simultaneously formed on CNT‐patterned substrate, and then coalesce into seamless devices. Chemically synthesized TMD devices exhibit attractive electrical and mechanical properties. It is demonstrated that chemically synthesized MoS₂–MoS₂/CNT devices have Ohmic contacts between MoS₂/CNT hybrid electrodes and MoS₂ channels. In addition, MoS₂–MoS₂/CNT devices show greatly enhanced mechanical stability and photoresponsivity compared with conventional gold‐contacted devices, which makes them suitable for flexible optoelectronics. Accordingly, a highly flexible pixel array based on chemically synthesized MoS₂–MoS₂/CNT photodetectors is applied for image sensing.     

MoS2/NiS Yolk–Shell Microsphere‐Based Electrodes for Overall Water Splitting and Asymmetric Supercapacitor

Rational designing of the composition and structure of electrode material is of great significance for achieving highly efficient energy storage and conversion in electrochemical energy devices. Herein, MoS₂/NiS yolk–shell microspheres are successfully synthesized via a facile ionic liquid‐assisted one‐step hydrothermal method. With the favorable interface effect and hollow structure, the electrodes assembled with MoS₂/NiS hybrid microspheres present remarkably enhanced electrochemical performance for both overall water splitting and asymmetric supercapacitors. In particular, to deliver a current density of 10 mA cm^?2, the MoS₂/NiS‐based electrolysis cell for overall water splitting only needs an output voltage of 1.64 V in the alkaline medium, lower than that of Pt/C–IrO₂‐based electrolysis cells (1.70 V). As an electrode for supercapacitors, the MoS₂/NiS hybrid microspheres exhibit a specific capacitance of 1493 F g^?1 at current density of 0.2 A g^?1, and remain 1165 F g^?1 even at a large current density of 2 A g^?1, implying outstanding charge storage capacity and excellent rate performance. The MoS₂/NiS‐ and active carbon‐based asymmetric supercapacitor manifests a maximum energy density of 31 Wh kg^?1 at a power density of 155.7 W kg^?1, and remarkable cycling stability with a capacitance retention of approximately 100% after 10 000 cycles.     

Impact of H‐Doping on n‐Type TMD Channels for Low‐Temperature Band‐Like Transport

Band‐like transport behavior of H‐doped transition metal dichalcogenide (TMD) channels in field effect transistors (FET) is studied by conducting low‐temperature electrical measurements, where MoTe₂, WSe₂, and MoS₂ are chosen for channels. Doped with H atoms through atomic layer deposition, those channels show strong n‐type conduction and their mobility increases without losing on‐state current as the measurement temperature decreases. In contrast, the mobility of unintentionally (naturally) doped TMD FETs always drops at low temperatures whether they are p‐ or n‐type. Density functional theory calculations show that H‐doped MoTe₂, WSe₂, and MoS₂ have Fermi levels above conduction band edge. It is thus concluded that the charge transport behavior in H‐doped TMD channels is metallic showing band‐like transport rather than thermal hopping. These results indicate that H‐doped TMD FETs are practically useful even at low‐temperature ranges.     

Fabrication of Flexible MoS2 Thin‐Film Transistor Arrays for Practical Gas‐Sensing Applications

By combining two kinds of solution‐processable two‐dimensional materials, a flexible transistor array is fabricated in which MoS₂ thin film is used as the active channel and reduced graphene oxide (rGO) film is used as the drain and source electrodes. The simple device configuration and the 1.5 mm‐long MoS₂ channel ensure highly reproducible device fabrication and operation. This flexible transistor array can be used as a highly sensitive gas sensor with excellent reproducibility. Compared to using rGO thin film as the active channel, this new gas sensor exhibits much higher sensitivity. Moreover, functionalization of the MoS₂ thin film with Pt nanoparticles further increases the sensitivity by up to ～3 times. The successful incorporation of a MoS₂ thin‐film into the electronic sensor promises its potential application in various electronic devices.     

High‐Performance,Room Temperature,Ultra‐Broadband Photodetectors Based on Air‐Stable PdSe2

Photodetection over a broad spectral range is crucial for optoelectronic applications such as sensing, imaging, and communication. Herein, a high‐performance ultra‐broadband photodetector based on PdSe₂ with unique pentagonal atomic structure is reported. The photodetector responds from visible to mid‐infrared range (up to ≈4.05 µm), and operates stably in ambient and at room temperature. It promises improved applications compared to conventional mid‐infrared photodetectors. The highest responsivity and external quantum efficiency achieved are 708 A W^?1 and 82 700%, respectively, at the wavelength of 1064 nm. Efficient optical absorption beyond 8 µm is observed, indicating that the photodetection range can extend to longer than 4.05 µm. Owing to the low crystalline symmetry of layered PdSe₂, anisotropic properties of the photodetectors are observed. This emerging material shows potential for future infrared optoelectronics and novel devices in which anisotropic properties are desirable.     

SnSe/MoS2 van der Waals Heterostructure Junction Field‐Effect Transistors with Nearly Ideal Subthreshold Slope

The minimization of the subthreshold swing (SS) in transistors is essential for low‐voltage operation and lower power consumption, both critical for mobile devices and internet of things (IoT) devices. The conventional metal‐oxide‐semiconductor field‐effect transistor requires sophisticated dielectric engineering to achieve nearly ideal SS (60 mV dec^?1 at room temperature). However, another type of transistor, the junction field‐effect transistor (JFET) is free of dielectric layer and can reach the theoretical SS limit without complicated dielectric engineering. The construction of a 2D SnSe/MoS₂ van der Waals (vdW) heterostructure‐based JFET with nearly ideal SS is reported. It is shown that the SnSe/MoS₂ vdW heterostructure exhibits excellent p–n diode rectifying characteristics with low saturate current. Using the SnSe as the gate and MoS₂ as the channel, the SnSe/MoS₂ vdW heterostructure exhibit well‐behavioured n‐channel JFET characteristics with a small pinch‐off voltage V_P of ?0.25 V, nearly ideal subthreshold swing SS of 60.3 mV dec^?1 and high ON/OFF ratio over 10⁶, demonstrating excellent electronic performance especially in the subthreshold regime.