Visual Quantitative Detection of Circulating Tumor Cells with Single‐Cell Sensitivity Using a Portable Microfluidic Device

Immunocytological technologies, molecular technologies, and functional assays are widely used for detecting circulating tumor cells (CTCs) after enrichment from patients' blood sample. Unfortunately, accessibility to these technologies is limited due to the need for sophisticated instrumentation and skilled operators. Portable microfluidic devices have become attractive tools for expanding the access and efficiency of detection beyond hospitals to sites near the patient. Herein, a volumetric bar chart chip (V‐Chip) is developed as a portable platform for CTC detection. The target CTCs are labeled with aptamer‐conjugated nanoparticles (ACNPs) and analyzed by V‐Chip through quantifying the byproduct (oxygen) of the catalytic reaction between ACNPs and hydrogen peroxide, which results in the movement of an ink bar to a concentration‐dependent distance for visual quantitative readout. Thus, the CTC number is decoded into visually quantifiable information and a linear correlation can be found between the distance moved by the ink and number of cells in the sample. This method is sensitive enough that a single cell can be detected. Furthermore, the clinical capabilities of this system are demonstrated for quantitative CTC detection in the presence of a high leukocyte background. This portable detection method shows great potential for quantification of rare cells with single‐cell sensitivity for various applications.     

Engineering Novel Targeted Boron‐10‐Enriched Theranostic Nanomedicine to Combat against Murine Brain Tumors via MR Imaging‐Guided Boron Neutron Capture Therapy

Glioblastoma multiforme (GBM) is a very common type of “incurable” malignant brain tumor. Although many treatment options are currently available, most of them eventually fail due to its recurrence. Boron neutron capture therapy (BNCT) emerges as an alternative noninvasive therapeutic treatment modality. The major challenge in treating GBMs using BNCT is to achieve selective imaging, targeting, and sufficient accumulation of boron‐containing drug at the tumor site so that effective destruction of tumor cells can be achieved without harming the normal brain cells. To tackle this challenge, this study demonstrates for the first time that an unprecedented ¹⁰B‐enriched (96% ¹⁰B enrichment) boron nanoparticle nanomedicine (¹⁰BSGRF NPs) surface‐modified with a Fluorescein isothiocyanate (FITC)‐labeled RGD‐K peptide can pass through the brain blood barrier, selectively target at GBM brain tumor sites, and deliver high therapeutic dosage (50.5 µg ¹⁰B g^?1 cells) of boron atoms to tumor cells with a good tumor‐to‐blood boron ratio of 2.8. The ¹⁰BSGRF NPs not only can enhance the contrast of magnetic resonance (MR) imaging to help diagnose the location/size/progress of brain tumor, but also effectively suppress murine brain tumors via MR imaging‐guided BNCT, prolonging the half‐life of mice from 22 d (untreated group) to 39 d.     

Boosting Interleukin‐12 Antitumor Activity and Synergism with Immunotherapy by Targeted Delivery with isoDGR‐Tagged Nanogold

The clinical use of interleukin‐12 (IL12), a cytokine endowed with potent immunotherapeutic anticancer activity, is limited by systemic toxicity. The hypothesis is addressed that gold nanoparticles tagged with a tumor‐homing peptide containing isoDGR, an αvβ3‐integrin binding motif, can be exploited for delivering IL12 to tumors and improving its therapeutic index. To this aim, gold nanospheres are functionalized with the head‐to‐tail cyclized‐peptide CGisoDGRG (Iso1) and murine IL12. The resulting nanodrug (Iso1/Au/IL12) is monodispersed, stable, and bifunctional in terms of αvβ3 and IL12‐receptor recognition. Low‐dose Iso1/Au/IL12, equivalent to 18–75 pg of IL12, induces antitumor effects in murine models of fibrosarcomas and mammary adenocarcinomas, with no evidence of toxicity. Equivalent doses of Au/IL12 (a nanodrug lacking Iso1) fail to delay tumor growth, whereas 15 000 pg of free IL12 is necessary to achieve similar effects. Iso1/Au/IL12 significantly increases tumor infiltration by innate immune cells, such as NK and iNKT cells, monocytes, and neutrophils. NK cell depletion completely inhibits its antitumor effects. Low‐dose Iso1/Au/IL12 can also increase the therapeutic efficacy of adoptive T‐cell therapy in mice with autochthonous prostate cancer. These findings indicate that coupling IL12 to isoDGR‐tagged nanogold is a valid strategy for enhancing its therapeutic index and sustaining adoptive T‐cell therapy.     

Nanowire‐Seeded Growth of Single‐Crystalline (010) β‐Ga2O3 Nanosheets with High Field‐Effect Electron Mobility and On/Off Current Ratio

2D β‐Ga₂O₃ nanosheets, as fundamental materials, have great potential in next generations of ultraviolet transparent electrodes, high‐temperature gas sensors, solar‐blind photodetectors, and power devices, while their synthesis and growth with high crystalline quality and well‐controlled orientation have not been reported yet. The present study demonstrates how to grow single‐crystalline ultrathin quasi‐hexagonal β‐Ga₂O₃ nanosheets with nanowire seeds and proposes a hierarchy‐oriented growth mechanism. The hierarchy‐oriented growth is initiated by epitaxial growth of a single‐crystalline $(\stackrel{?}{2}01)$β‐Ga₂O₃ nanowire on a GaN nanocrystal and followed by homoepitaxial growth of quasi‐hexagonal (010) β‐Ga₂O₃ nanosheets. The undoped 2D (010) β‐Ga₂O₃ nanosheet field effect transistor has a field‐effect electron mobility of 38 cm² V^?1 s^?1 and an on/off current ratio of 10⁷ with an average subthreshold swing of 150 mV dec^?1. The from‐nanowires‐to‐nanosheets technique paves a novel way to fabricate nanosheets, which has great impact on the field of nanomaterial synthesis and growth and the area of nanoelectronics as well.     

Kidney Podocytes as Specific Targets for cyclo(RGDfC)‐Modified Nanoparticles

Renal nanoparticle passage opens the door for targeting new cells like podocytes, which constitute the exterior part of the renal filter. When cyclo(RGDfC)‐modified Qdots are tested on isolated primary podocytes for selective binding to the αvβ3 integrin receptor a highly cell‐ and receptor‐specific binding can be observed. In displacement experiments with free cyclo(RGDfC) IC₅₀ values of 150 nM for αvβ3 integrin over‐expressing U87‐MG cells and 60 nM for podocytes are measured. Confocal microscopy shows a cellular Qdot uptake into vesicle‐like structures. Our ex vivo study gives clear evidence that, after renal filtration, nanoparticles can be targeted to podocyte integrin receptors in the future. This could be a highly promising approach for future therapy and diagnostics of podocyte‐associated diseases.     

Growth of Single‐Walled Carbon Nanotubes with Different Chirality on Same Solid Cobalt Catalysts at Low Temperature

Currently, designing solid catalysts at high temperature is the main strategy to realize single‐walled carbon nanotubes (SWNTs) with specific chirality, meaning it is very hard and challenging to create new catalysts or faces to fit new chirality. However, low temperatures make most catalysts solid, and developing solid catalysts at low temperature is desired to realize chirality control of SWNTs. A rational approach to grow SWNTs array with different chiralities on same solid Co catalysts at low temperature (650 °C) is herein put forward. Using solid Co catalysts, near‐armchair (10, 9) tubes horizontal array with ≈75% selectivity and (12, 6) tubes array with ≈82% are realized by adopting a small amount of ethanol and large amount of CO respectively. (10, 9) tubes are enriched for thermodynamic stability and (12, 6) tubes for kinetics growth rate. Both kinds of tubes show a similar symmetry to the Co (1 1 1) face with threefold symmetry for the symmetry matching nucleation mechanism proposed earlier. This method provides a new strategy to study the nucleation mechanism and more possibilities for preparing new solid catalysts to control the structure of SWNTs.     

Identification of the anthelix motif in the TGF‐β superfamily by molecular 3D‐Rapid Prototyping

3D‐Rapid Prototyping (3D‐RP) is a novel technique for the construction of highly accurate three‐dimensional polyamide models of biomolecules. This method has been shown to be a valuable tool in the modeling of protein‐protein‐interactions as well as in the analysis of surface topography. Using this technique we were recently able to identify a so far unknown structure on the concave side of bone morphogenetic protein 2 (BMP‐2). Since this structure is the imprint of a left‐handed helix we have called this negative an unthelix. Obviously this novel structural feature of BMP‐2 may act as a binding side for endogenous ligands. BMP‐2 belongs to the highly conserved Transforming Growth Factor‐β (TGF‐β) superfamily, a large group of multifunctional peptides controlling differentiation, proliferation and repair in multicellular organism. The protomer structures of all members share a cystine‐knot motif as a characteristic feature. The question therefore arose whether a) the novel anthelical motif found in BMP‐2 is a common structural feature of this family and b) if there are any differences in terms of pitch and radius of the anthelix. As anthelical structures are difficult to visualize and nearly impossible to quantify using 3D molecular visualization software we constructed models of BMP‐2, BMP‐7 and TGF‐β2 from X‐ray crystallographic data by 3D‐Rapid Prototyping (3D‐RP). The anthelix motif was found in BMP‐2, BMP‐7 and TGF‐β2 with similar values for pitch (ca. 8‐10 nm) and radius (ca. 0.5‐0.7 nm). In contrast the anthelical motif was not found in a 3D‐RP model of human chorionic gonadotropin (HCG) which is also a member of the cystine‐knot family but doesn’t belong to the TGF‐β superfamily. These results were corroborated by measurements of the intersubunit angle of these dimeric proteins (141‐149°) and the distances between the center of mass (1.68‐1.96 nm) of the subunits both of which appear to be determinants of the anthelical pitch. We conclude that the anthelical groove on the concave side is a common structural motif of BMP‐2, BMP‐7 and TGF‐β2 and maybe of the whole group of the TGF‐β superfamily.     

In Situ Encapsulating α‐MnS into N,S‐Codoped Nanotube‐Like Carbon as Advanced Anode Material: α → β Phase Transition Promoted Cycling Stability and Superior Li/Na‐Storage Performance in Half/Full Cells

Incorporation of N,S‐codoped nanotube‐like carbon (N,S‐NTC) can endow electrode materials with superior electrochemical properties owing to the unique nanoarchitecture and improved kinetics. Herein, α‐MnS nanoparticles (NPs) are in situ encapsulated into N,S‐NTC, preparing an advanced anode material (α‐MnS@N,S‐NTC) for lithium‐ion/sodium‐ion batteries (LIBs/SIBs). It is for the first time revealed that electrochemical α → β phase transition of MnS NPs during the 1st cycle effectively promotes Li‐storage properties, which is deduced by the studies of ex situ X‐ray diffraction/high‐resolution transmission electron microscopy and electrode kinetics. As a result, the optimized α‐MnS@N,S‐NTC electrode delivers a high Li‐storage capacity (1415 mA h g^?1 at 50 mA g^?1), excellent rate capability (430 mA h g^?1 at 10 A g^?1), and long‐term cycling stability (no obvious capacity decay over 5000 cycles at 1 A g^?1) with retained morphology. In addition, the N,S‐NTC‐based encapsulation plays the key roles on enhancing the electrochemical properties due to its high conductivity and unique 1D nanoarchitecture with excellent protective effects to active MnS NPs. Furthermore, α‐MnS@N,S‐NTC also delivers high Na‐storage capacity (536 mA h g^?1 at 50 mA g^?1) without the occurrence of such α → β phase transition and excellent full‐cell performances as coupling with commercial LiFePO₄ and LiNi_0.6Co_0.2Mn_0.2O₂ cathodes in LIBs as well as Na₃V₂(PO₄)₂O₂F cathode in SIBs.     

Probing the Domain Architecture in 2D α‐Mo2C via Polarized Raman Spectroscopy

MXenes are emerging 2D materials with intriguing properties such as excellent stability and high conductivity. Here, a systematic study on the Raman spectra of 2D α‐Mo₂C (molybdenum carbide), a promising member in MXene family, is conducted. Six experimentally observed Raman modes from ultrathin α‐Mo₂C crystal are first assigned with the assistance of phonon dispersion calculated from density functional theory. Angle‐resolved polarized Raman spectroscopy indicates the anisotropy of α‐Mo₂C in the b–c plane. Raman spectroscopy is further used to study the unique domain structures of 2D α‐Mo₂C crystals grown by chemical vapor deposition. A Raman mapping investigation suggests that most of the α‐Mo₂C flakes contain multiple domains and the c‐axes of neighboring domains tend to form a 60° or 120° angle, due to the weak Mo? C bonds in this interstitial carbide and the low formation energy of the carbon chains along three equivalent directions. This study demonstrates that polarized Raman spectroscopy is a powerful and effective way to characterize the domain structures in α‐Mo₂C, which will facilitate the further exploration of the domain‐structure‐related properties and potential applications of α‐Mo₂C.     

Thermally Phase‐Transformed In2Se3 Nanowires for Highly Sensitive Photodetectors

The photoresponse characteristics of In₂Se₃ nanowire photodetectors with the κ‐phase and α‐phase structures are investigated. The as‐grown κ‐phase In₂Se₃ nanowires by the vapor‐liquid‐solid technique are phase‐transformed to the α‐phase nanowires by thermal annealing. The photoresponse performances of the κ‐phase and α‐phase In₂Se₃ nanowire photodetectors are characterized over a wide range of wavelengths (300–900 nm). The phase of the nanowires is analyzed using a high‐resolution transmission microscopy equipped with energy dispersive X‐ray spectroscopy and X‐ray diffraction. The electrical conductivity and photoresponse characteristics are significantly enhanced in the α‐phase due to smaller bandgap structure compared to the κ‐phase nanowires. The spectral responsivities of the α‐phase devices are 200 times larger than those of the κ‐phase devices. The superior performance of the thermally phase‐transformed In₂Se₃ nanowire devices offers an avenue to develop highly sensitive photodetector applications.     

Graphene Scroll‐Coated α‐MnO2 Nanowires as High‐Performance Cathode Materials for Aqueous Zn‐Ion Battery

The development of manganese dioxide as the cathode for aqueous Zn‐ion battery (ZIB) is limited by the rapid capacity fading and material dissolution. Here, a highly reversible aqueous ZIB using graphene scroll‐coated α‐MnO₂ as the cathode is proposed. The graphene scroll is uniformly coated on the MnO₂ nanowire with an average width of 5 nm, which increases the electrical conductivity of the MnO₂ nanowire and relieves the dissolution of the cathode material during cycling. An energy density of 406.6 Wh kg^?1 (382.2 mA h g^?1) at 0.3 A g^?1 can be reached, which is the highest specific energy value among all the cathode materials for aqueous Zn‐ion battery so far, and good long‐term cycling stability with 94% capacity retention after 3000 cycles at 3 A g^?1 are achieved. Meanwhile, a two‐step intercalation mechanism that Zn ions first insert into the layers and then the tunnels of MnO₂ framework is proved by in situ X‐ray diffraction, galvanostatic intermittent titration technique, and X‐ray photoelectron spectroscopy characterizations. The graphene scroll‐coated metallic oxide strategy can also bring intensive interests for other energy storage systems.     

Traceable Nanoparticles with Dual Targeting and ROS Response for RNAi‐Based Immunochemotherapy of Intracranial Glioblastoma Treatment

The chemotherapy of glioblastoma is severely hindered by the immunosuppressive tumor microenvironment, especially the tumor growth factor β (TGF‐β), an immunosuppressive cytokine. In this study, it is proposed to employ RNAi‐based immunomodulation to modify the tumor immune microenvironment and improve the effect of chemotherapy. Herein, a nanotheranostic system (Angiopep LipoPCB(Temozolomide+BAP/siTGF‐β), ALBTA) with dual targeting and ROS response is established for intracranial glioblastoma treatment. The traceable nanoparticles exhibit strong siRNA condensation, high drug loading efficiency, good serum stability, and magnetic property. They can efficiently cross the blood–brain barrier and target to glioblastoma cells via receptor‐mediated transcytosis. The zwitterionic lipid (distearoyl phosphoethanol‐amine‐polycarboxybetaine lipid) in ALBTA promotes endosomal/lysosomal escape, and thus enhances the cytotoxicity of temozolomide and improves gene silencing efficiency of siTGF‐β. ALBTA significantly improves the immunosuppressive microenvironment and prolongs the survival time of glioma‐bearing mice. Moreover, ALBTA can be accurately traced by MRI in brain tumors. The study indicates that this immunochemotherapeutic platform can serve as a flexible and powerful synergistic system for treatment with brain tumors as well as other brain diseases in central nervous system.     

High‐Temperature Shape Memory Effect in Ti‐Ta Thin Films Sputter Deposited at Room Temperature

Ti‐Ta based alloys are potential high‐temperature shape memory materials with operation temperatures above 100 °C. In this study, the room temperature fabrication of Ti‐Ta thin films showing a reversible martensitic transformation and a high temperature shape memory effect above 200 °C is reported. In contrast to other shape memory thin films, no further heat treatment is necessary to obtain the functional properties. A disordered α″ martensite (orthorhombic) phase is formed in the as‐deposited co‐sputtered Ti₇₀Ta₃₀, Ti₆₈Ta₃₂ and Ti₆₇Ta₃₃ films, independent of the substrate. A Ti₇₀Ta₃₀ free‐standing film shows a reversible martensitic transformation, as confirmed by temperature–dependent XRD measurements during thermal cycling between 125 °C to 275 °C. Furthermore, a one‐way shape memory effect is qualitatively confirmed in this film. The observed properties of the Ti‐Ta thin films make them promising for applications on polymer substrates and especially in microsystem technologies.     

Modelling three‐dimensional piece‐wise homogeneous domains using the α‐shape‐based natural element method

In this paper, the application of the natural element method (NEM) to the numerical analysis of two‐ and three‐dimensional piece‐wise homogeneous domains is presented. The NEM differs from other meshless methods in its capability to accurately reproduce essential boundary conditions along convex boundaries. The α‐shape‐based extension of this method (α‐NEM) generalizes this behaviour to non‐convex domains, enables us to construct models entirely in terms of the initial cloud of points and allows us to simulate material discontinuities in a straightforward manner. In the following sections, simple and effective algorithms are presented for the construction of α‐shapes in domains composed of various materials. Examples are presented in two‐ and three‐dimensional cases in the context of linear elastostatics showing good performance even with the simple numerical quadrature used. Copyright © 2002 John Wiley & Sons, Ltd.     

H+‐Insertion Boosted α‐MnO2 for an Aqueous Zn‐Ion Battery

Rechargeable Zn/MnO₂ batteries using mild aqueous electrolytes are attracting extensive attention due to their low cost, high safety, and environmental friendliness. However, the charge‐storage mechanism involved remains a topic of controversy so far. Also, the practical energy density and cycling stability are still major issues for their applications. Herein, a free‐standing α‐MnO₂ cathode for aqueous zinc‐ion batteries (ZIBs) is directly constructed with ultralong nanowires, leading to a rather high energy density of 384 mWh g^?1 for the entire electrode. Greatly, the H⁺/Zn²⁺ coinsertion mechanism of α‐MnO₂ cathode for aqueous ZIBs is confirmed by a combined analysis of in situ X‐ray diffractometry, ex situ transmission electron microscopy, and electrochemical methods. More interestingly, the Zn²⁺‐insertion is found to be less reversible than H⁺‐insertion in view of the dramatic capacity fading occurring in the Zn²⁺‐insertion step, which is further evidenced by the discovery of an irreversible ZnMn₂O₄ layer at the surface of α‐MnO₂. Hence, the H⁺‐insertion process actually plays a crucial role in maintaining the cycling performance of the aqueous Zn/α‐MnO₂ battery. This work is believed to provide an insight into the charge‐storage mechanism of α‐MnO₂ in aqueous systems and paves the way for designing aqueous ZIBs with high energy density and long‐term cycling ability.     

Polyhydroxylated Metallofullerenols Stimulate IL‐1β Secretion of Macrophage through TLRs/MyD88/NF‐κB Pathway and NLRP3 Inflammasome Activation

Polyhydroxylated fullerenols especially gadolinium endohedral metallofullerenols (Gd@C₈₂(OH)₂₂) are shown as a promising agent for antitumor chemotherapeutics and good immunoregulatory effects with low toxicity. However, their underlying mechanism remains largely unclear. We found for the first time the persistent uptake and subcellular distribution of metallofullerenols in macrophages by taking advantages of synchrotron‐based scanning transmission X‐ray microscopy (STXM) with high spatial resolution of 30 nm. Gd@C₈₂(OH)₂₂ can significantly activate primary mouse macrophages to produce pro‐inflammatory cytokines like IL‐1β. Small interfering RNA (siRNA) knockdown shows that NLRP3 in?ammasomes, but not NLRC4, participate in fullerenol‐induced IL‐1β production. Potassium efflux, activation of P2X₇ receptor and intracellular reactive oxygen speciesare also important factors required for fullerenols‐induced IL‐1β release. Stronger NF‐κB signal triggered by Gd@C₈₂(OH)₂₂ is in agreement with higher pro‐IL‐1β expression than C₆₀(OH)₂₂. Interestingly, TLR4/MyD88 pathway but not TLR2 mediates IL‐1β secretion in Gd@C₈₂(OH)₂₂ exposure confirmed by macrophages from MyD88^?/?/TLR4^?/?/TLR2^?/? knockout mice, which is different from C₆₀(OH)₂₂. Our work demonstrated that fullerenols can greatly activate macrophage and promote IL‐1β production via both TLRs/MyD88/NF‐κB pathway and NLRP3 inflammasome activation, while Gd@C₈₂(OH)₂₂ had stronger ability C₆₀(OH)₂₂ due to the different electron affinity on the surface of carbon cage induced by the encaged gadolinium ion.