Minimization of Ion–Solvent Clusters in Gel Electrolytes Containing Graphene Oxide Quantum Dots for Lithium‐Ion Batteries

This study uses graphene oxide quantum dots (GOQDs) to enhance the Li⁺‐ion mobility of a gel polymer electrolyte (GPE) for lithium‐ion batteries (LIBs). The GPE comprises a framework of poly(acrylonitrile‐co‐vinylacetate) blended with poly(methyl methacrylate) and a salt LiPF₆ solvated in carbonate solvents. The GOQDs, which function as acceptors, are small (3?11 nm) and well dispersed in the polymer framework. The GOQDs suppress the formation of ion?solvent clusters and immobilize anions, affording the GPE a high ionic conductivity and a high Li⁺‐ion transference number (0.77). When assembled into Li|electrolyte|LiFePO₄ batteries, the GPEs containing GOQDs preserve the battery capacity at high rates (up to 20 C) and exhibit 100% capacity retention after 500 charge?discharge cycles. Smaller GOQDs are more effective in GPE performance enhancement because of the higher dispersion of QDs. The minimization of both the ion?solvent clusters and degree of Li⁺‐ion solvation in the GPEs with GOQDs results in even plating and stripping of the Li‐metal anode; therefore, Li dendrite formation is suppressed during battery operation. This study demonstrates a strategy of using small GOQDs with tunable properties to effectively modulate ion?solvent coordination in GPEs and thus improve the performance and lifespan of LIBs.     

Early Lithium Plating Behavior in Confined Nanospace of 3D Lithiophilic Carbon Matrix for Stable Solid‐State Lithium Metal Batteries

Considerable efforts are devoted to relieve the critical lithium dendritic and volume change problems in the lithium metal anode. Constructing uniform Li⁺ distribution and lithium “host” are shown to be the most promising strategies to drive practical lithium metal anode development. Herein, a uniform Li nucleation/growth behavior in a confined nanospace is verified by constructing vertical graphene on a 3D commercial copper mesh. The difference of solid‐electrolyte interphase (SEI) composition and lithium growth behavior in the confined nanospace is further demonstrated by in‐depth X‐ray photoelectron spectrometer (XPS) and line‐scan energy dispersive X‐ray spectroscopic (EDS) methods. As a result, a high Columbic efficiency of 97% beyond 250 cycles at a current density of 2 mA cm^?2 and a prolonged lifespan of symmetrical cell (500 cycles at 5 mA cm^?2) can be easily achieved. More meaningfully, the solid‐state lithium metal cell paired with the composite lithium anode and LiNi_0.5Co_0.2Mn_0.3O₂ (NCM) as the cathode also demonstrate reduced polarization and extended cycle. The present confined nanospace–derived hybrid anode can further promote the development of future all solid‐state lithium metal batteries.     

MoS2/Celgard Separator as Efficient Polysulfide Barrier for Long‐Life Lithium–Sulfur Batteries

A high lithium conductive MoS₂/Celgard composite separator is reported as efficient polysulfides barrier in Li–S batteries. Significantly, thanks to the high density of lithium ions on MoS₂ surface, this composite separator shows high lithium conductivity, fast lithium diffusion, and facile lithium transference. When used in Li–S batteries, the separator is proven to be highly efficient for depressing polysulfides shuttle, leading to high and long cycle stability. With 65% of sulfur loading, the device with MoS₂/Celgard separator delivers an initial capacity of 808 mAh g^?1 and a substantial capacity of 401 mAh g^?1 after 600 cycles, corresponding to only 0.083% of capacity decay per cycle that is comparable to the best reported result so far. In addition, the Coulombic efficiency remains more than 99.5% during all 600 cycles, disclosing an efficient ionic sieve preventing polysulfides migration to the anode while having negligible influence on Li⁺ ions transfer across the separator. The strategy demonstrated in this work will open the door toward developing efficient separators with flexible 2D materials beyond graphene for energy‐storage devices.     

Gradient‐Distributed Nucleation Seeds on Conductive Host for a Dendrite‐Free and High‐Rate Lithium Metal Anode

Much attention is paid to metal lithium as a hopeful negative material for reversible batteries with a high specific capacity. Although applying 3D hosts can relieve the dendrite growth to some extent, gradient‐distributed lithium ion in 3D uniform hosts still induces uncontrolled lithium dendrites growth, especially at high lithium capacity and high current density. Herein, a 3D conductive carbon nanofiber framework with gradient‐distributed ZnO particles as nucleation seeds (G‐CNF) to regulate lithium deposition is proposed. Based on such a unique structure, the G‐CNF electrode exhibits a high average Coulombic efficiency (CE) of 98.1% for 700 cycles at 0.5 mA cm^?2. Even at 5 mA cm^?2, the G‐CNF electrode performs a stable cycling process and high CE of 96.0% for over 200 cycles. When the lithium‐deposited G‐CNF (G‐CNF‐Li) anode is applied in a full cell with a commercial LiFePO₄ cathode, it exhibits a stable capacity of 115 mAh g^?1 and high retention of 95.7% after 300 cycles. Through inducing the gradient‐distributed nucleation seeds to counter the existing Li‐ion concentration polarization, a uniform and stable lithium deposition process in the 3D host is achieved even under the condition of high current density.     

Double‐Layer Polymer Electrolyte for High‐Voltage All‐Solid‐State Rechargeable Batteries

No single polymer or liquid electrolyte has a large enough energy gap between the empty and occupied electronic states for both dendrite‐free plating of a lithium‐metal anode and a Li⁺ extraction from an oxide host cathode without electrolyte oxidation in a high‐voltage cell during the charge process. Therefore, a double‐layer polymer electrolyte is investigated, in which one polymer provides dendrite‐free plating of a Li‐metal anode and the other allows a Li⁺ extraction from an oxide host cathode without oxidation of the electrolyte in a 4 V cell over a stable charge/discharge cycling at 65 °C; a poly(ethylene oxide) polymer contacts the lithium‐metal anode and a poly(N‐methyl‐malonic amide) contacts the cathode. All interfaces of the flexible, plastic electrolyte remain stable with no visible reduction of the Li⁺ conductivity on crossing the polymer/polymer interface.     

Interlayered Dendrite‐Free Lithium Plating for High‐Performance Lithium‐Metal Batteries

For its high theoretical capacity and low redox potential, Li metal is considered to be one of the most promising anode materials for next‐generation batteries. However, practical application of a Li‐metal anode is impeded by Li dendrites, which are generated during the cycling of Li plating/stripping, leading to safety issues. Researchers attempt to solve this problem by spatially confining the Li plating. Yet, the effective directing of Li deposition into the confined space is challenging. Here, an interlayer is constructed between a graphitic carbon nitrite layer (g‐C₃N₄) and carbon cloth (CC), enabling site‐directed dendrite‐free Li plating. The g‐C₃N₄/CC as an anode scaffold enables extraordinary cycling stability for over 1500 h with a small overpotential of ≈80 mV at 2 mA cm^?2. Furthermore, prominent battery performance is also demonstrated in a full cell (Li/g‐C₃N₄/CC as anode and LiCoO₂ as cathode) with high Coulombic efficiency of 99.4% over 300 cycles.     

An Autotransferable g‐C3N4 Li+‐Modulating Layer toward Stable Lithium Anodes

Commercial deployment of lithium anodes has been severely impeded by the poor battery safety, unsatisfying cycling lifespan, and efficiency. Recently, building artificial interfacial layers over a lithium anode was regarded as an effective strategy to stabilize the electrode. However, the fabrications reported so far have mostly been conducted directly upon lithium foil, often requiring stringent reaction conditions with indispensable inert environment protection and highly specialized reagents due to the high reactivity of metallic lithium. Besides, the uneven lithium‐ion flux across the lithium surface should be more powerfully tailored via mighty interfacial layer materials. Herein, g‐C₃N₄ is employed as a Li⁺‐modulating material and a brand‐new autotransferable strategy to fabricate this interfacial layer for Li anodes without any inert atmosphere protection and limitation of chemical regents is developed. The g‐C₃N₄ film is filtrated on the separator in air using a common alcohol solution and then perfectly autotransferred to the lithium surface by electrolyte wetting during normal cell assembly. The abundant nitrogen species within g‐C₃N₄ nanosheets can form transient Li? N bonds to powerfully stabilize the lithium‐ion flux and thus enable a CE over 99% for 900 cycles and smooth deposition at high current densities and capacities, surpassing most previous works.     

Graphene Oxide Sieving Membrane for Improved Cycle Life in High‐Efficiency Redox‐Mediated Li–O2 batteries

As soluble catalysts, redox‐mediators (RMs) endow mobility to catalysts for unconstrained access to tethered solid discharge products, lowering the energy barrier for Li₂O₂ formation/decomposition; however, this desired mobility is accompanied by the undesirable side effect of RM migration to the Li metal anode. The reaction between RMs and Li metal degrades both the Li metal and the RMs, leading to cell deterioration within a few cycles. To extend the cycle life of redox‐mediated Li–O₂ batteries, herein graphene oxide (GO) membranes are reported as RM‐blocking separators. It is revealed that the size of GO nanochannels is narrow enough to reject 5,10‐dihydro‐5,10‐dimethylphenazine (DMPZ) while selectively allowing the transport of smaller Li⁺ ions. The negative surface charges of GO further repel negative ions via Donnan exclusion, greatly improving the lithium ion transference number. The Li–O₂ cells with GO membranes efficiently harness the redox‐mediation activity of DMPZ for improved performance, achieving energy efficiency of above 80% for more than 25 cycles, and 90% for 78 cycles when the capacity limits were 0.75 and 0.5 mAh cm^‐2, respectively. Considering the facile preparation of GO membranes, RM‐sieving GO membranes can be cost‐effective and processable functional separators in Li–O₂ batteries.     

Intercalating Ti2Nb14O39 Anode Materials for Fast‐Charging,High‐Capacity and Safe Lithium–Ion Batteries

Ti–Nb–O binary oxide materials represent a family of promising intercalating anode materials for lithium‐ion batteries. In additional to their excellent capacities (388–402 mAh g^–1), these materials show excellent safety characteristics, such as an operating potential above the lithium plating voltage and minimal volume change. Herein, this study reports a new member in the Ti–Nb–O family, Ti₂Nb₁₄O₃₉, as an advanced anode material. Ti₂Nb₁₄O₃₉ porous spheres (Ti₂Nb₁₄O₃₉‐S) exhibit a defective shear ReO₃ crystal structure with a large unit cell volume and a large amount of cation vacancies (0.85% vs all cation sites). These morphological and structural characteristics allow for short electron/Li⁺‐ion transport length and fast Li⁺‐ion diffusivity. Consequently, the Ti₂Nb₁₄O₃₉‐S material delivers significant pseudocapacitive behavior and excellent electrochemical performances, including high reversible capacity (326 mAh g^?1 at 0.1 C), high first‐cycle Coulombic efficiency (87.5%), safe working potential (1.67 V vs Li/Li⁺), outstanding rate capability (223 mAh g^–1 at 40 C) and durable cycling stability (only 0.032% capacity loss per cycle over 200 cycles at 10 C). These impressive results clearly demonstrate that Ti₂Nb₁₄O₃₉‐S can be a promising anode material for fast‐charging, high capacity, safe and stable lithium‐ion batteries.     

Li+‐Containing,Continuous Silica Nanofibers for High Li+ Conductivity in Composite Polymer Electrolyte

Solid‐state electrolytes have recently attracted significant attention toward safe and high‐energy lithium chemistries. In particular, polyethylene oxide (PEO)‐based composite polymer electrolytes (CPEs) have shown outstanding mechanical flexibility and manufacturing feasibility. However, their limited ionic conductivity, poor electrochemical stability, and insufficient mechanical strength are yet to be addressed. In this work, a novel CPE supported by Li⁺‐containing SiO₂ nanofibers is developed. The nanofibers are obtained via sol–gel electrospinning, during which lithium sulfate is in situ introduced into the nanofibers. The uniform doping of Li₂SO₄ in SiO₂ nanofibers increases the Li⁺ conductivity of SiO₂, generates mesopores on the surface of SiO₂ nanofibers, and improves the wettability between SiO₂ and PEO. As a result, the obtained SiO₂/Li₂SO₄/PEO CPE yields high Li⁺ conductivity (1.3 × 10^?4 S cm^?1 at 60 °C, ≈4.9 times the Li₂SO₄‐free CPE) and electrochemical stability. Furthermore, the all‐solid‐state LiFePO₄‐Li full cell demonstrates stable cycling with high capacities (over 80 mAh g^?1, 50 cycles at C/2 at 60 °C). The Li⁺‐containing mesoporous SiO₂ nanofibers show great potential as the filler for CPEs. Similar methods can be used to incorporate Li salts into other filler materials for CPEs.     

RuO2 Particles Anchored on Brush‐Like 3D Carbon Cloth Guide Homogenous Li/Na Nucleation Framework for Stable Li/Na Anode

Lithium (sodium)‐metal batteries are the most promising batteries for next‐generation electrical energy storage due to their high volumetric energy density and gravimetric energy density. However, their applications have been prevented by uncontrollable dendrite growth and large volume expansion during the stripping/plating process. To address this issue, the key strategy is to realize uniform lithium (sodium) deposition during the stripping/plating process. Herein, a thin lithiophilic layer consisting of RuO₂ particles anchored on brush‐like 3D carbon cloth (RuO₂@CC) is prepared by a simple solution‐based method. After infusion of Li, the RuO₂@CC transfers to Li‐Ru@CC. Ru nanoparticles not only play a role in leading Li⁺ (Na⁺) to plate on the 3D carbon framework, but also lower local current density because of the good electrical conductivity. Furthermore, density functional theory calculations demonstrate that Ru metal, the reaction product of alkali metal and Ru, can lead Li⁺ to plate evenly around carbon fiber owing to the strong binding energy with Li⁺. The Li‐Ru@CC anode shows ultralong cycle life (1500 h at 5 mA cm^?2). The full cell of Li‐Ru@CC|LiFePO₄ exhibits lower polarization (90% capacity retention after 650 cycles). In addition, sodium metal batteries based on Na‐Ru@CC anodes can achieve similar improvement.     

In Situ Designing a Gradient Li+ Capture and Quasi-Spontaneous Diffusion Anode Protection Layer toward Long-Life Li−O2 Batteries

Lithium metal is the only anode material that can enable the Li−O₂ battery to realize its high theoretical energy density (≈3500 Wh kg⁻¹). However, the inherent uncontrolled dendrite growth and serious corrosion limitations of lithium metal anodes make it experience fast degradation and impede the practical application of Li−O₂ batteries. Herein, a multifunctional complementary LiF/F-doped carbon gradient protection layer on a lithium metal anode by one-step in situ reaction of molten Li with poly(tetrafluoroethylene) (PTFE) is developed. The abundant strong polar C-F bonds in the upper carbon can not only act as Li⁺ capture site to pre-uniform Li⁺ flux but also regulate the electron configuration of LiF to make Li⁺ quasi-spontaneously diffuse from carbon to LiF surface, avoiding the strong Li⁺-adhesion-induced Li aggregation. For LiF, it can behave as fast Li⁺ conductor and homogenize the nucleation sites on lithium, as well as ensure firm connection with lithium. As a result, this well-designed protection layer endows the Li metal anode with dendrite-free plating/stripping and anticorrosion behavior both in ether-based and carbonate ester-based electrolytes. Even applied protected Li anodes in Li−O₂ batteries, its superiority can still be maintained, making the cell achieve stable cycling performance (180 cycles).     

High Performance Lithium‐Ion Batteries Using Layered 2H‐MoTe2 as Anode

The major challenges faced by candidate electrode materials in lithium‐ion batteries (LIBs) include their low electronic and ionic conductivities. 2D van der Waals materials with good electronic conductivity and weak interlayer interaction have been intensively studied in the electrochemical processes involving ion migrations. In particular, molybdenum ditelluride (MoTe₂) has emerged as a new material for energy storage applications. Though 2H‐MoTe₂ with hexagonal semiconducting phase is expected to facilitate more efficient ion insertion/deinsertion than the monoclinic semi‐metallic phase, its application as an anode in LIB has been elusive. Here, 2H‐MoTe₂, prepared by a solid‐state synthesis route, has been employed as an efficient anode with remarkable Li⁺ storage capacity. The as‐prepared 2H‐MoTe₂ electrodes exhibit an initial specific capacity of 432 mAh g^?1 and retain a high reversible specific capacity of 291 mAh g^?1 after 260 cycles at 1.0 A g^?1. Further, a full‐cell prototype is demonstrated by using 2H‐MoTe₂ anode with lithium cobalt oxide cathode, showing a high energy density of 454 Wh kg^?1 (based on the MoTe₂ mass) and capacity retention of 80% over 100 cycles. Synchrotron‐based in situ X‐ray absorption near‐edge structures have revealed the unique lithium reaction pathway and storage mechanism, which is supported by density functional theory based calculations.     

Constructing Ionic Gradient and Lithiophilic Interphase for High‐Rate Li‐Metal Anode

Li metal is the optimal choice as an anode due to its high theoretical capacity, but it suffers from severe dendrite growth, especially at high current rates. Here, an ionic gradient and lithiophilic inter‐phase film is developed, which promises to produce a durable and high‐rate Li‐metal anode. The film, containing an ionic‐conductive Li_0.33La_0.56TiO₃ nanofiber (NF) layer on the top and a thin lithiophilic Al₂O₃ NF layer on the bottom, is fabricated with a sol–gel electrospinning method followed by sintering. During cycling, the top layer forms a spatially homogenous ionic field distribution over the anode, while the bottom layer reduces the driving force of Li‐dendrite formation by decreasing the nucleation barrier, enabling dendrite‐free plating‐stripping behavior over 1000 h at a high current density of 5 mA cm^?2. Remarkably, full cells of Li//LiNi_0.8Co_0.15Al_0.05O₂ exhibit a high capacity of 133.3 mA h g^?1 at 5 C over 150 cycles, contributing a step forward for high‐rate Li‐metal anodes.     

Lithiophilic Cu‐CuO‐Ni Hybrid Structure: Advanced Current Collectors Toward Stable Lithium Metal Anodes

Metallic lithium (Li) is a promising anode material for next‐generation rechargeable batteries. However, the dendrite growth of Li and repeated formation of solid electrolyte interface during Li plating and stripping result in low Coulombic efficiency, internal short circuits, and capacity decay, hampering its practical application. In the development of stable Li metal anode, the current collector is recognized as a critical component to regulate Li plating. In this work, a lithiophilic Cu‐CuO‐Ni hybrid structure is synthesized as a current collector for Li metal anodes. The low overpotential of CuO for Li nucleation and the uniform Li⁺ ion flux induced by the formation of Cu nanowire arrays enable effective suppression of the growth of Li dendrites. Moreover, the surface Cu layer can act as a protective layer to enhance structural durability of the hybrid structure in long‐term running. As a result, the Cu‐CuO‐Ni hybrid structure achieves a Coulombic efficiency above 95% for more than 250 cycles at a current density of 1 mA cm^?2 and 580 h (290 cycles) stable repeated Li plating and stripping in a symmetric cell.     

NixMnyCozO Nanowire/CNT Composite Microspheres with 3D Interconnected Conductive Network Structure via Spray‐Drying Method: A High‐Capacity and Long‐Cycle‐Life Anode Material for Lithium‐Ion Batteries

The combination of high‐capacity and long‐term cycling stability is an important factor for practical application of anode materials for lithium‐ion batteries. Herein, Ni_xMn_yCo_zO nanowire (x + y + z = 1)/carbon nanotube (CNT) composite microspheres with a 3D interconnected conductive network structure (3DICN‐NCS) are prepared via a spray‐drying method. The 3D interconnected conductive network structure can facilitate the penetration of electrolyte into the microspheres and provide excellent connectivity for rapid Li⁺ ion/electron transfer in the microspheres, thus greatly reducing the concentration polarization in the electrode. Additionally, the empty spaces among the nanowires in the network accommodate microsphere volume expansion associated with Li⁺ intercalation during the cycling process, which improves the cycling stability of the electrode. The CNTs distribute uniformly in the microspheres, which act as conductive frameworks to greatly improve the electrical conductivity of the microspheres. As expected, the prepared 3DICN‐NCS demonstrates excellent electrochemical performance, showing a high capacity of 1277 mAh g^?1 at 1 A g^?1 after 2000 cycles and 790 mAh g^?1 at 5 A g^?1 after 1000 cycles. This work demonstrates a universal method to construct a 3D interconnected conductive network structure for anode materials     

Prelithiated V2C MXene: A High‐Performance Electrode for Hybrid Magnesium/Lithium‐Ion Batteries by Ion Cointercalation

The pursuit of high reversible capacity and long cycle life for rechargeable batteries has gained extensive attention in recent years, and the development of applicable electrode materials is the key point. Herein, thanks to the preintercalation of lithium ions, a stable and highly conductive nanostructure of V₂C MXene is successfully fabricated via a facile self‐discharge mechanism, which provides open spaces for rapid ion diffusion and guarantees fast electron transport. Taking the prelithiated V₂C as electrode, an outstanding initial coulombic efficiency of 80% and an impressive capacity retention of ≈98% after 5000 charge/discharge cycles are achieved for lithium‐ion batteries. Especially, it demonstrates a fascinating reversible capacity of up to 230.3 mA h g^?1 at 0.02 A g^?1 and a long cycling life of 82% capacity retention over 480 cycles in the hybrid magnesium/lithium‐ion batteries. In addition, the Mg²⁺ and Li⁺ ions cointercalation mechanism of the prelithiated V₂C is elucidated through ex situ X‐ray diffraction and X‐ray photoelectron spectroscopy characterizations. This work not only offers an effective approach to compensate the large initial lithium loss of high‐capacity anode materials but also opens up a new and viable avenue to develop promising hybrid Mg/Li‐storage materials with eminent electrochemical performance.     

Flexible Aqueous Li‐Ion Battery with High Energy and Power Densities

A flexible and wearable aqueous symmetrical lithium‐ion battery is developed using a single LiVPO₄F material as both cathode and anode in a “water‐in‐salt” gel polymer electrolyte. The symmetric lithium‐ion chemistry exhibits high energy and power density and long cycle life, due to the formation of a robust solid electrolyte interphase consisting of Li₂CO₃‐LiF, which enables fast Li‐ion transport. Energy densities of 141 Wh kg^?1, power densities of 20 600 W kg^?1, and output voltage of 2.4 V can be delivered during >4000 cycles, which is far superior to reported aqueous energy storage devices at the same power level. Moreover, the full cell shows unprecedented tolerance to mechanical stress such as bending and cutting, where it not only does not catastrophically fail, as most nonaqueous cells would, but also maintains cell performance and continues to operate in ambient environment, a unique feature apparently derived from the high stability of the “water‐in‐salt” gel polymer electrolyte.     

In Situ Construction of Stable Tissue‐Directed/Reinforced Bifunctional Separator/Protection Film on Lithium Anode for Lithium–Oxygen Batteries

To achieve a high reversibility and long cycle life for Li–O₂ battery system, the stable tissue‐directed/reinforced bifunctional separator/protection film (TBF) is in situ fabricated on the surface of metallic lithium anode. It is shown that a Li–O₂ cell composed of the TBF‐modified lithium anodes exhibits an excellent anodic reversibility (300 cycles) and effectively improved cathodic long lifetime (106 cycles). The improvement is attributed to the ability of the TBF, which has chemical, electrochemical, and mechanical stability, to effectively prevent direct contact between the surface of the lithium anode and the highly reactive reduced oxygen species (Li₂O₂ or its intermediate LiO₂) in cell. It is believed that the protection strategy describes here can be easily extended to other next‐generation high energy density batteries using metal as anode including Li–S and Na–O₂ batteries.     

Carbon‐Coated Li3VO4 Spheres as Constituents of an Advanced Anode Material for High‐Rate Long‐Life Lithium‐Ion Batteries

Lithium‐ion batteries are receiving considerable attention for large‐scale energy‐storage systems. However, to date the current cathode/anode system cannot satisfy safety, cost, and performance requirements for such applications. Here, a lithium‐ion full battery based on the combination of a Li₃VO₄ anode with a LiNi_0.5Mn_1.5O₄ cathode is reported, which displays a better performance than existing systems. Carbon‐coated Li₃VO₄ spheres comprising nanoscale carbon‐coating primary particles are synthesized by a morphology‐inheritance route. The observed high capacity combined with excellent sample stability and high rate capability of carbon‐coated Li₃VO₄ spheres is superior to other insertion anode materials. A high‐performance full lithium‐ion battery is fabricated by using the carbon‐coated Li₃VO₄ spheres as the anode and LiNi_0.5Mn_1.5O₄ spheres as the cathode; such a cell shows an estimated practical energy density of 205 W h kg^?1 with greatly improved properties such as pronounced long‐term cyclability, and rapid charge and discharge.