DNA‐Assembled Core‐Satellite Upconverting‐Metal–Organic Framework Nanoparticle Superstructures for Efficient Photodynamic Therapy

DNA‐mediated assembly of core–satellite structures composed of Zr(IV)‐based porphyrinic metal‐organic framework (MOF) and NaYF₄,Yb,Er upconverting nanoparticles (UCNPs) for photodynamic therapy (PDT) is reported. MOF NPs generate singlet oxygen (¹O₂) upon photoirradiation with visible light without the need for additional small molecule, diffusional photosensitizers such as porphyrins. Using DNA as a templating agent, well‐defined MOF–UCNP clusters are produced where UCNPs are spatially organized around a centrally located MOF NP. Under NIR irradiation, visible light emitted from the UCNPs is absorbed by the core MOF NP to produce ¹O₂ at significantly greater amounts than what can be produced from simply mixing UCNPs and MOF NPs. The MOF–UCNP core–satellite superstructures also induce strong cell cytotoxicity against cancer cells, which are further enhanced by attaching epidermal growth factor receptor targeting affibodies to the PDT clusters, highlighting their promise as theranostic photodynamic agents.     

From UV to Near‐Infrared Light‐Responsive Metal–Organic Framework Composites: Plasmon and Upconversion Enhanced Photocatalysis

The exploitation of photocatalysts that harvest solar spectrum as broad as possible remains a high‐priority target yet grand challenge. In this work, for the first time, metal–organic framework (MOF) composites are rationally fabricated to achieve broadband spectral response from UV to near‐infrared (NIR) region. In the core–shell structured upconversion nanoparticles (UCNPs)‐Pt@MOF/Au composites, the MOF is responsive to UV and a bit visible light, the plasmonic Au nanoparticles (NPs) accept visible light, whereas the UCNPs absorb NIR light to emit UV and visible light that are harvested by the MOF and Au once again. Moreover, the MOF not only facilitates the generation of “bare and clean” Au NPs on its surface and realizes the spatial separation for the Au and Pt NPs, but also provides necessary access for catalytic substrates/products to Pt active sites. As a result, the optimized composite exhibits excellent photocatalytic hydrogen production activity (280 µmol g^?1 h^?1) under simulated solar light, and the involved mechanism of photocatalytic H₂ production under UV, visible, and NIR irradiation is elucidated. Reportedly, this is an extremely rare study on photocatalytic H₂ production by light harvesting in all UV, visible, and NIR regions.     

Super‐Stable,Highly Efficient,and Recyclable Fibrous Metal–Organic Framework Membranes for Precious Metal Recovery from Strong Acidic Solutions

Precious metals such as palladium (Pd) and platinum (Pt) are marvelous materials in the fields of electronic and catalysis, but they are tapering day by day. Zr(IV)‐based metal–organic frameworks (MOFs) are competent for their recovery, notably in harsh environments, while the general powder form limits their practical application. Porous MOF‐based membranes with ultraefficient metal ion permeation, strong stability, and high selectivity are, therefore, strikingly preferred. Herein, a set of polymeric fibrous membranes incorporated with the UiO‐66 series are fabricated; their adsorption/desorption capabilities toward Pd(II) and Pt(IV) are evaluated from strongly acidic solutions; and the MOF–polymer compatibilities are investigated. Polyurethane (PU)/UiO‐66‐NH₂ showed strong acid resistance and high chemical stability, which are attributable to strong π–π interactions between PU and MOF nanoparticles with a high configuration of energy. The as‐fabricated MOF membranes show extremely good adsorption/desorption performances without ruptures/coalitions of nanofibers or leak of MOF nanoparticles, and successfully display the efficacy in a gravity‐driven or even continuous‐flow system with good recycle performance and selectivity. The as‐fabricated MOF membranes set an example of potential MOF–polymer compatibility for practical applications.     

Metal–Organic‐Framework‐Based Catalysts for Photoreduction of CO2

Photoreduction of CO₂ into reusable carbon forms is considered as a promising approach to address the crisis of energy from fossil fuels and reduce excessive CO₂ emission. Recently, metal–organic frameworks (MOFs) have attracted much attention as CO₂ photoreduction‐related catalysts, owing to their unique electronic band structures, excellent CO₂ adsorption capacities, and tailorable light‐absorption abilities. Recent advances on the design, synthesis, and CO₂ reduction applications of MOF‐based photocatalysts are discussed here, beginning with the introduction of the characteristics of high‐efficiency photocatalysts and structural advantages of MOFs. The roles of MOFs in CO₂ photoreduction systems as photocatalysts, photocatalytic hosts, and cocatalysts are analyzed. Detailed discussions focus on two constituents of pure MOFs (metal clusters such as Ti–O, Zr–O, and Fe–O clusters and functional organic linkers such as amino‐modified, photosensitizer‐functionalized, and electron‐rich conjugated linkers) and three types of MOF‐based composites (metal–MOF, semiconductor–MOF, and photosensitizer–MOF composites). The constituents, CO₂ adsorption capacities, absorption edges, and photocatalytic activities of these photocatalysts are highlighted to provide fundamental guidance to rational design of efficient MOF‐based photocatalyst materials for CO₂ reduction. A perspective of future research directions, critical challenges to be met, and potential solutions in this research field concludes the discussion.     

Sustainable Synthesis of Co@NC Core Shell Nanostructures from Metal Organic Frameworks via Mechanochemical Coordination Self‐Assembly: An Efficient Electrocatalyst for Oxygen Reduction Reaction

Herein, a new type of cobalt encapsulated nitrogen‐doped carbon (Co@NC) nanostructure employing Zn_xCo_1?x(C₃H₄N₂) metal–organic framework (MOF) as precursor is developed, by a simple, ecofriendly, solvent‐free approach that utilizes a mechanochemical coordination self‐assembly strategy. Possible evolution of Zn_xCo_1?x(C₃H₄N₂) MOF structures and their conversion to Co@NC nanostructures is established from an X‐ray diffraction technique and transmission electron microscopy analysis, which reveal that MOF‐derived Co@NC core–shell nanostructures are well ordered and highly crystalline in nature. Co@NC–MOF core–shell nanostructures show excellent catalytic activity for the oxygen reduction reaction (ORR), with onset potential of 0.97 V and half‐wave potential of 0.88 V versus relative hydrogen electrode in alkaline electrolyte, and excellent durability with zero degradation after 5000 potential cycles; whereas under similar experimental conditions, the commonly utilized Pt/C electrocatalyst degrades. The Co@NC–MOF electrocatalyst also shows excellent tolerance to methanol, unlike the Pt/C electrocatalyst. X‐ray photoelectron spectroscopy (XPS) analysis shows the presence of ORR active pyridinic‐N and graphitic‐N species, along with CoN_x? C_y and Co? N_x ORR active (M–N–C) sites. Enhanced electron transfer kinetics from nitrogen‐doped carbon shell to core Co nanoparticles, the existence of M–N–C active sites, and protective NC shells are responsible for high ORR activity and durability of the Co@NC–MOF electrocatalyst.     

Okra‐Like Fe7S8/C@ZnS/N‐C@C with Core–Double‐Shelled Structures as Robust and High‐Rate Sodium Anode

Core–multishelled structures with controlled chemical composition have attracted great interest due to their fascinating electrochemical performance. Herein, a metal–organic framework (MOF)‐on‐MOF self‐templated strategy is used to fabricate okra‐like bimetal sulfide (Fe₇S₈/C@ZnS/N‐C@C) with core–double‐shelled structure, in which Fe₇S₈/C is distributed in the cores, and ZnS is embedded in one of the layers. The MOF‐on‐MOF precursor with an MIL‐53 core, a ZIF‐8 shell, and a resorcinol–formaldehyde (RF) layer (MIL‐53@ZIF‐8@RF) is prepared through a layer‐by‐layer assembly method. After calcination with sulfur powder, the resultant structure has a hierarchical carbon matrix, abundant internal interface, and tiered active material distribution. It provides fast sodium‐ion reaction kinetics, a superior pseudocapacitance contribution, good resistance of volume changes, and stepwise sodiation/desodiation reaction mechanism. As an anode material for sodium‐ion batteries, the electrochemical performance of Fe₇S₈/C@ZnS/N‐C@C is superior to that of Fe₇S₈/C@ZnS/N‐C, Fe₇S₈/C, or ZnS/N‐C. It delivers a high and stable capacity of 364.7 mAh g^?1 at current density of 5.0 A g^?1 with 10 000 cycles, and registers only 0.00135% capacity decay per cycle. This MOF‐on‐MOF self‐templated strategy may provide a method to construct core–multishelled structures with controlled component distributions for the energy conversion and storage.     

UIO‐66‐NH2‐Derived Mesoporous Carbon Catalyst Co‐Doped with Fe/N/S as Highly Efficient Cathode Catalyst for PEMFCs

Efficient, low‐cost catalysts are desirable for the sluggish oxygen reduction reaction (ORR). Herein, UIO‐66‐NH₂‐derived multi‐element (Fe, S, N) co‐doped porous carbon catalyst is reported, Fe/N/S‐PC, with an octahedral morphology, a well‐defined mesoporous structure, and highly dispersed doping elements, synthesized by a double‐solvent diffusion‐pyrolysis method (DSDPM). The morphology of the UIO‐66‐NH₂ precursor is perfectly inherited by the derived carbon material, resulting in a high surface area, a well‐defined mesoporous structure, and atomic‐level dispersion of the doping elements. Fe/N/S‐PC demonstrates outstanding catalytic activity and durability for the ORR in both alkaline and acidic solutions. In 0.1 m KOH, its half‐potential reaches 0.87 V (vs reversible hydrogen electrode (RHE)), 30 mV more positive than that of a 20 wt% Pt/C catalyst. In 0.1 m HClO₄, it reaches 0.785 V (vs RHE), only 65 mV less than that of Pt/C. The catalyst also exhibits excellent performance in acidic hydrogen/oxygen proton exchange membrane fuel cells. A membrane electrode assembly (MEA) with the catalyst as the cathode reaches 700 mA·cm^‐2 at 0.6 V and a maximum power density of 553 mW·cm^‐2, ranking it among the best MEAs with a nonprecious metal catalyst as the cathode.     

Nanostructured Metal–Organic Framework (MOF)‐Derived Solid Electrolytes Realizing Fast Lithium Ion Transportation Kinetics in Solid‐State Batteries

Solid‐state batteries are hindered from practical applications, largely due to the retardant ionic transportation kinetics in solid electrolytes (SEs) and across electrode/electrolyte interfaces. Taking advantage of nanostructured UIO/Li‐IL SEs, fast lithium ion transportation is achieved in the bulk and across the electrode/electrolyte interfaces; in UIO/Li‐IL SEs, Li‐containing ionic liquid (Li‐IL) is absorbed in Uio‐66 metal–organic frameworks (MOFs). The ionic conductivity of the UIO/Li‐IL (15/16) SE reaches 3.2 × 10^?4 S cm^?1 at 25 °C. Owing to the high surface tension of nanostructured UIO/Li‐IL SEs, the contact between electrodes and the SE is excellent; consequently, the interfacial resistances of Li/SE and LiFePO₄/SE at 60 °C are about 44 and 206 Ω cm², respectively. Moreover, a stable solid conductive layer is formed at the Li/SE interface, making the Li plating/stripping stable. Solid‐state batteries from the UIO/Li‐IL SEs show high discharge capacities and excellent retentions (≈130 mA h g^?1 with a retention of 100% after 100 cycles at 0.2 C; 119 mA h g^?1 with a retention of 94% after 380 cycles at 1 C). This new type of nanostructured UIO/Li‐IL SEs is very promising for solid‐state batteries, and will open up an avenue toward safe and long lifespan energy storage systems.     

Novel MOF‐Derived Co@N‐C Bifunctional Catalysts for Highly Efficient Zn–Air Batteries and Water Splitting

Metal–organic frameworks (MOFs) and MOF‐derived materials have recently attracted considerable interest as alternatives to noble‐metal electrocatalysts. Herein, the rational design and synthesis of a new class of Co@N‐C materials (C‐MOF‐C2‐T) from a pair of enantiotopic chiral 3D MOFs by pyrolysis at temperature T is reported. The newly developed C‐MOF‐C2‐900 with a unique 3D hierarchical rodlike structure, consisting of homogeneously distributed cobalt nanoparticles encapsulated by partially graphitized N‐doped carbon rings along the rod length, exhibits higher electrocatalytic activities for oxygen reduction and oxygen evolution reactions (ORR and OER) than that of commercial Pt/C and RuO₂, respectively. Primary Zn–air batteries based on C‐MOF‐900 for the oxygen reduction reaction (ORR) operated at a discharge potential of 1.30 V with a specific capacity of 741 mA h g_Zn^–1 under 10 mA cm^–2. Rechargeable Zn–air batteries based on C‐MOF‐C2‐900 as an ORR and OER bifunctional catalyst exhibit initial charge and discharge potentials at 1.81 and 1.28 V (2 mA cm^–2), along with an excellent cycling stability with no increase in polarization even after 120 h – outperform their counterparts based on noble‐metal‐based air electrodes. The resultant rechargeable Zn–air batteries are used to efficiently power electrochemical water‐splitting systems, demonstrating promising potential as integrated green energy systems for practical applications.     

Constructing Connected Paths between UiO‐66 and PIM‐1 to Improve Membrane CO2 Separation with Crystal‐Like Gas Selectivity

Most metal–organic‐framework‐ (MOF‐) based hybrid membranes face the challenge of low gas permeability in CO₂ separation. This study presents a new strategy of interweaving UiO‐66 and PIM‐1 to build freeways in UiO‐66‐CN@sPIM‐1 membranes for fast CO₂ transport. In this strategy, sPIM‐1 is rigidified via thermal treatment to make polymer voids permanent, and concurrently polymer chains are mutually linked onto UiO‐66‐CN crystals to minimize interfacial defects. The pore chemistry of UiO‐66‐CN is kept intact in hybrid membranes, allowing full utilization of MOF pores and selective adsorption for CO₂. Separation results show that UiO‐66‐CN@sPIM‐1 membranes possess exceptionally high CO₂ permeability (15433.4–22665 Barrer), approaching to that of UiO‐66‐NH₂ crystal (65–75% of crystal‐derived permeability). Additionally, the CO₂/N₂ permeation selectivity for a representative membrane (23.9–28.6) moves toward that of single crystal (24.6–29.6). The unique structure and superior CO₂/N₂ separation performance make UiO‐66‐CN@sPIM‐1 membranes promising in practical CO₂ separations.     

Multistimuli Responsive Core–Shell Nanoplatform Constructed from Fe3O4@MOF Equipped with Pillar[6]arene Nanovalves

An intelligent theranostic nanoplatform based on nanovalve operated metal–organic framework (MOF) core–shell hybrids, incorporating tumorous microenvironment‐triggered drug release, magnetic resonance imaging (MRI) guidance, sustained release, and effective chemotherapy in one pot is reported. The core–shell hybrids are constructed by an in situ growth method, in which Fe₃O₄ particles with superior abilities of MRI and magnetic separation form the core and UiO‐66 MOF with high loading capacity compose the shell, and then are surface‐installed with pillararene‐based pseudorotaxanes as tightness‐adjustable nanovalves. This strategy endows the system with the ability of targeted, multistimuli responsive drug release in response to pH changes, temperature variations, and competitive agents. Water‐soluble carboxylatopillar[6]arene system achieved sustained drug release over 7 days due to stronger host–guest binding, suggesting that the nanovalve tightness further reinforces the desirable release of anticancer agent over a prolonged time at the lesion site.     

Engineering 2D Metal–Organic Framework/MoS2 Interface for Enhanced Alkaline Hydrogen Evolution

2D metal–organic frameworks (MOFs) have been widely investigated for electrocatalysis because of their unique characteristics such as large specific surface area, tunable structures, and enhanced conductivity. However, most of the works are focused on oxygen evolution reaction. There are very limited numbers of reports on MOFs for hydrogen evolution reaction (HER), and generally these reported MOFs suffer from unsatisfactory HER activities. In this contribution, novel 2D Co‐BDC/MoS₂ (BDC stands for 1,4‐benzenedicarboxylate, C₈H₄O₄) hybrid nanosheets are synthesized via a facile sonication‐assisted solution strategy. The introduction of Co‐BDC induces a partial phase transfer from semiconducting 2H‐MoS₂ to metallic 1T‐MoS₂. Compared with 2H‐MoS₂, 1T‐MoS₂ can activate the inert basal plane to provide more catalytic active sites, which contributes significantly to improving HER activity. The well‐designed Co‐BDC/MoS₂ interface is vital for alkaline HER, as Co‐BDC makes it possible to speed up the sluggish water dissociation (rate‐limiting step for alkaline HER), and modified MoS₂ is favorable for the subsequent hydrogen generation step. As expected, the resultant 2D Co‐BDC/MoS₂ hybrid nanosheets demonstrate remarkable catalytic activity and good stability toward alkaline HER, outperforming those of bare Co‐BDC, MoS₂, and almost all the previously reported MOF‐based electrocatalysts.     

Kinetic‐Controlled Formation of Bimetallic Metal–Organic Framework Hybrid Structures

Heterometallic metal–organic frameworks (MOFs) are constructed from two or more kinds of metal ions, while still remaining their original topologies. Due to distinct reaction kinetics during MOF formation, partial distribution of different metals within a single MOF crystal can lead to sophisticated heterogeneous nanostructures. Here, this study reports an investigation of reaction kinetics for different metal ions in a bimetallic MOF system, the ZIF‐8/67 (M(2‐mIM)₂, M = Zn for ZIF‐8, and Co for ZIF‐67, 2‐mIM = 2‐methylimidazole), by in situ optical method. Distinct kinetics of the two metals forming single‐component MOFs are revealed, and when both Co and Zn ions are present in the starting solution, homogeneous distributions of the two metals are only achieved at high Co/Zn ratio, while at low Co/Zn ratio concentration gradient from Co‐rich cores to Zn‐rich shells is observed. Further, by adding the two metals in sequence, more sophisticated structures are achieved. Specifically, when Co²⁺ is added first, ZIF‐67@ZIF‐8/67 core–shell nanocrystals are achieved with tunable core/shell thickness ratio depending on the time intervals; while when Zn²⁺ is added first, only agglomerates of irregular shape form due to the weak nucleation ability of Zn²⁺.     

Flexible Metal–Organic Framework‐Based Mixed‐Matrix Membranes: A New Platform for H2S Sensors

Metal–organic framework (MOF)–polymer mixed‐matrix membranes (MMMs) have shown great potential and superior performance in gas separations. However, their sensing application has not been fully established yet. Herein, a rare example of using flexible MOF‐based MMMs as a fluorescent turn‐on sensor for the detection of hydrogen sulfide (H₂S) is reported. These MOF‐based MMMs are readily prepared by mixing a highly stable aluminum‐based nano‐MOF (Al‐MIL‐53‐NO₂) into poly(vinylidene fluoride) with high loadings up to 70%. Unlike the intrinsic fragility and poor processability of pure‐MOF membranes, these MMMs exhibit desirable flexibility and processability that are more suitable for practical sensing applications. The uniform distribution of Al‐MIL‐53‐NO₂ particles combined with the permanent pores of MOFs enable these MMMs to show good water permeation flux and consequently have a full contact between the analyte and MOFs. The developed MMM sensor (70% MOF loading) thus shows a highly remarkable detection selectivity and sensitivity for H₂S with an exceptionally low detection limit around 92.31 × 10^?9m , three orders of magnitude lower than the reported powder‐form MOFs. This work demonstrates that it is feasible to develop flexible luminescent MOF‐based MMMs as a novel platform for chemical sensing applications.     

Space‐Confined Synthesis of ZIF‐67 Nanoparticles in Hollow Carbon Nanospheres for CO2 Adsorption

Herein, the design and synthesis of ZIF‐67 nanoparticles (NPs) with tunable size grown inside hollow carbon nanospheres (ZIF‐67@HCSs) via a space‐confined strategy is reported. HCSs are first prepared via pyrolysis of polystyrene@polypyrrole (PS@PPy) composite nanospheres. Further infiltration of 2‐methylimidazole (MI) into the HCSs (MI@HCSs) using a melting‐diffusion strategy, followed by immersing MI@HCSs into Co(NO₃)₂ solution through the pores and channels of HCSs results in the formation of ZIF‐67@HCSs. The as‐synthesized ZIF‐67@HCSs with tunable ZIF‐67 size is achieved by changing the amount of MI. Due to the high pore volume provided by nanoscale ZIF‐67 NPs, the as‐prepared core–shell ZIF‐67@HCSs exhibit outstanding adsorption capacity for CO₂.     

Yolk–Shell Nanostructure: An Ideal Architecture to Achieve Harmonious Integration of Magnetic–Plasmonic Hybrid Theranostic Platform

Magnetic–plasmonic hybrid nanoparticles (MPHNs) have attracted great interest in cancer theranostics. However, the relaxivity of the magnetic component is typically reduced by the plasmonic component in conventional core–shell structured MPHNs, due to the presence of a water‐impenetrable coating which severely restricts the proximity of protons to the magnetic portion. To circumvent this issue, yolk–shell structured MPHNs comprising a Fe₃O₄ core within a hollow cavity encircled by a porous Au outer shell are designed. As expected, the introduction of hollow cavity between the magnetic and plasmonic portions significantly prevents the decline in relaxivity of the Fe₃O₄ core caused by the Au layer. Moreover, in addition to conferring high near‐infrared absorption to plasmonic component, the hollow cavity and the pores in the outer shell can also provide a large storage space and release channels for anticancer drugs. Furthermore, the multicomponent nanoparticles (NPs) still have a compact size of less than 100 nm to ensure efficient tumor accumulation. Taken together, the yolk–shell Fe₃O₄@Au NPs can be regarded as an ideal magnetic–plasmonic theranostic platform for magnetic resonance/photoacoustic/positron emission tomography multimodal imaging and light‐activated chemothermal synergistic therapy.     

Control of Shell Morphology in p–n Heterostructured Water‐Processable Semiconductor Colloids: Toward Extremely Efficient Charge Separation

This article describes p–n heterostructured water‐borne semiconductor naonoparticles (NPs) with unique surface structures via control of shell morphology. The shell particles, comprising PC60–[6,6]‐phenyl‐C61‐butyric acid methyl ester (PC₆₁BM) composite, having n‐type semiconductor characteristics, notably influence the charge carrier behavior in the core–shell NPs. A one‐ or two‐phase methodology based on a PC60 surfactant‐water phase and PC₆₁BM n‐type semiconductor‐organic phase provides highly specific control over the shell structure of the NPs, which promote their superior charge separation ability when combined with poly‐3‐hexyl‐thiophene (P3HT). Moreover, the resulting water‐borne NP exhibits shell morphology‐dependent carrier quenching and stability, which is characterized via luminescence studies paired with structural analysis. Corresponding to the results, outstanding performances of photovoltaic cells with over 5% efficiency are achieved. The results suggest that the surrounding shell environments, such as the shell structure, and its electronic charge density, are crucial in determining the overall activity of the core–shell p–n heterostructured NPs. Thus, this work provides a new protocol in the current fields of water‐based organic semiconductor colloids.     

Design and Synthesis of Spherical Multicomponent Aggregates Composed of Core–Shell,Yolk–Shell,and Hollow Nanospheres and Their Lithium‐Ion Storage Performances

Micrometer‐sized spherical aggregates of Sn and Co components containing core–shell, yolk–shell, hollow nanospheres are synthesized by applying nanoscale Kirkendall diffusion in the large‐scale spray drying process. The Sn₂Co₃–Co₃SnC_0.7–C composite microspheres uniformly dispersed with Sn₂Co₃–Co₃SnC_0.7 mixed nanocrystals are formed by the first‐step reduction of spray‐dried precursor powders at 900 °C. The second‐step oxidation process transforms the Sn₂Co₃–Co₃SnC_0.7–C composite into the porous microsphere composed of Sn–Sn₂Co₃@CoSnO₃–Co₃O₄ core–shell, Sn–Sn₂Co₃@CoSnO₃–Co₃O₄ yolk–shell, and CoSnO₃–Co₃O₄ hollow nanospheres at 300, 400, and 500 °C, respectively. The discharge capacity of the microspheres with Sn–Sn₂Co₃@CoSnO₃–Co₃O₄ core–shell, Sn‐Sn₂Co₃@CoSnO₃–Co₃O₄ yolk–shell, and CoSnO₃–Co₃O₄ hollow nanospheres for the 200^th cycle at a current density of 1 A g^?1 is 1265, 987, and 569 mA h g^?1, respectively. The ultrafine primary nanoparticles with a core–shell structure improve the structural stability of the porous‐structured microspheres during repeated lithium insertion and desertion processes. The porous Sn–Sn₂Co₃@CoSnO₃–Co₃O₄ microspheres with core–shell primary nanoparticles show excellent cycling and rate performances as anode materials for lithium‐ion batteries.     

Nitrogen‐Doped Carbon Nanotube Confined Co–Nx Sites for Selective Hydrogenation of Biomass‐Derived Compounds

Biomass is the most abundant renewable resource on earth and developing high‐performance nonprecious selective hydrogenation (SH) catalysts will enable the use of biomass to replace rapidly diminishing fossil resources. This work utilizes ZIF‐67‐derived nitrogen‐doped carbon nanotubes to confine Co nanoparticles (NPs) with Co–N_x active sites as a high‐performance SH catalyst. The confined Co NPs with Co–N_x exhibit excellent catalytic activity, selectivity, and stability toward a wide range of biomass‐derived compounds. Such active sites can selectively hydrogenate aldehyde, ketone, carboxyl, and nitro groups of biomass‐derived compounds into value‐added fine chemicals with 100% selectivity. The reported approach could be adopted to create other forms of catalytically active sites from other nonprecious metals.     

Metal–Organic Framework Hybrid‐Assisted Formation of Co3O4/Co‐Fe Oxide Double‐Shelled Nanoboxes for Enhanced Oxygen Evolution

Rational design of complex metal–organic framework (MOF) hybrid precursors offers a great opportunity to construct various functional nanostructures. Here, a novel MOF‐hybrid‐assisted strategy to synthesize Co₃O₄/Co‐Fe oxide double‐shelled nanoboxes is reported. In the first step, zeolitic imidazolate framework‐67 (ZIF‐67, a Co‐based MOF)/Co‐Fe Prussian blue analogue (PBA) yolk–shell nanocubes are formed via a facile anion‐exchange reaction between ZIF‐67 nanocube precursors and [Fe(CN)₆]^3? ions at room temperature. Subsequently, an annealing treatment is applied to prepare Co₃O₄/Co‐Fe oxide double‐shelled nanoboxes. Owing to the structural and compositional benefits, the as‐derived Co₃O₄/Co‐Fe oxide double‐shelled nanoboxes exhibit enhanced electrocatalytic performance for oxygen evolution reaction in alkaline solution.