Na2Ti6O13 Nanorods with Dominant Large Interlayer Spacing Exposed Facet for High‐Performance Na‐Ion Batteries

As the delegate of tunnel structure sodium titanates, Na₂Ti₆O₁₃ nanorods with dominant large interlayer spacing exposed facet are prepared. The exposed large interlayers provide facile channels for Na⁺ insertion and extraction when this material is used as anode for Na‐ion batteries (NIBs). After an activation process, this NIB anode achieves a high specific capacity (a capacity of 172 mAh g^?1 at 0.1 A g^?1) and outstanding cycling stability (a capacity of 109 mAh g^?1 after 2800 cycles at 1 A g^?1), showing its promising application on large‐scale energy storage systems. Furthermore, the electrochemical and structural characterization reveals that the expanded interlayer spacings should be in charge of the activation process, including the enhanced kinetics, the lowered apparent activation energy, and the increased capacity.     

N‐Doped C@Zn3B2O6 as a Low Cost and Environmentally Friendly Anode Material for Na‐Ion Batteries: High Performance and New Reaction Mechanism

Na‐ion batteries (NIBs) are ideal candidates for solving the problem of large‐scale energy storage, due to the worldwide sodium resource, but the efforts in exploring and synthesizing low‐cost and eco‐friendly anode materials with convenient technologies and low‐cost raw materials are still insufficient. Herein, with the assistance of a simple calcination method and common raw materials, the environmentally friendly and nontoxic N‐doped C@Zn₃B₂O₆ composite is directly synthesized and proved to be a potential anode material for NIBs. The composite demonstrates a high reversible charge capacity of 446.2 mAh g^?1 and a safe and suitable average voltage of 0.69 V, together with application potential in full cells (discharge capacity of 98.4 mAh g^?1 and long cycle performance of 300 cycles at 1000 mA g^?1). In addition, the sodium‐ion storage mechanism of N‐doped C@Zn₃B₂O₆ is subsequently studied through air‐insulated ex situ characterizations of X‐ray diffraction (XRD), X‐ray photoelectron spectroscopy (XPS), and Fourier‐transform infrared (FT‐IR) spectroscopy, and is found to be rather different from previous reports on borate anode materials for NIBs and lithium‐ion batteries. The reaction mechanism is deduced and proposed as: Zn₃B₂O₆ + 6Na⁺ + 6e^? ? 3Zn + B₂O₃ ? 3Na₂O, which indicates that the generated boracic phase is electrochemically active and participates in the later discharge/charge progress.     

Confined Amorphous Red Phosphorus in MOF‐Derived N‐Doped Microporous Carbon as a Superior Anode for Sodium‐Ion Battery

Red phosphorus (P) has attracted intense attention as promising anode material for high‐energy density sodium‐ion batteries (NIBs), owing to its high sodium storage theoretical capacity (2595 mAh g^?1). Nevertheless, natural insulating property and large volume variation of red P during cycling result in extremely low electrochemical activity, leading to poor electrochemical performance. Herein, the authors demonstrate a rational strategy to improve sodium storage performance of red P by confining nanosized amorphous red P into zeolitic imidazolate framework‐8 (ZIF‐8) ‐derived nitrogen‐doped microporous carbon matrix (denoted as P@N‐MPC). When used as anode for NIBs, the P@N‐MPC composite displays a high reversible specific capacity of ≈600 mAh g^?1 at 0.15 A g^?1 and improved rate capacity (≈450 mAh g^?1 at 1 A g^?1 after 1000 cycles with an extremely low capacity fading rate of 0.02% per cycle). The superior sodium storage performance of the P@N‐MPC is mainly attributed to the novel structure. The N‐doped porous carbon with sub‐1 nm micropore facilitates the rapid diffusion of organic electrolyte ions and improves the conductivity of the encapsulated red P. Furthermore, the porous carbon matrix can buffer the volume change of red P during repeat sodiation/desodiation process, keeping the structure intact after long cycle life.     

Construction of Bimetallic Selenides Encapsulated in Nitrogen/Sulfur Co‐Doped Hollow Carbon Nanospheres for High‐Performance Sodium/Potassium‐Ion Half/Full Batteries

Metallic selenides have been widely investigated as promising electrode materials for metal‐ion batteries based on their relatively high theoretical capacity. However, rapid capacity decay and structural collapse resulting from the larger‐sized Na⁺/K⁺ greatly hamper their application. Herein, a bimetallic selenide (MoSe₂/CoSe₂) encapsulated in nitrogen, sulfur‐codoped hollow carbon nanospheres interconnected reduced graphene oxide nanosheets (rGO@MCSe) are successfully designed as advanced anode materials for Na/K‐ion batteries. As expected, the significant pseudocapacitive charge storage behavior substantially contributes to superior rate capability. Specifically, it achieves a high reversible specific capacity of 311 mAh g^?1 at 10 A g^?1 in NIBs and 310 mAh g^?1 at 5 A g^?1 in KIBs. A combination of ex situ X‐ray diffraction, Raman spectroscopy, and transmission electron microscopy tests reveals the phase transition of rGO@MCSe in NIBs/KIBs. Unexpectedly, they show quite different Na⁺/K⁺ insertion/extraction reaction mechanisms for both cells, maybe due to more sluggish K⁺ diffusion kinetics than that of Na⁺. More significantly, it shows excellent energy storage properties in Na/K‐ion full cells when coupled with Na₃V₂(PO₄)₂O₂F and PTCDA@450 °C cathodes. This work offers an advanced electrode construction guidance for the development of high‐performance energy storage devices.     

Porous Carbon Nanofibers Encapsulated with Peapod‐Like Hematite Nanoparticles for High‐Rate and Long‐Life Battery Anodes

Fe₂O₃ is regarded as a promising anode material for lithium‐ion batteries (LIBs) and sodium‐ion batteries (SIBs) due to its high specific capacity. The large volume change during discharge and charge processes, however, induces significant cracking of the Fe₂O₃ anodes, leading to rapid fading of the capacity. Herein, a novel peapod‐like nanostructured material, consisting of Fe₂O₃ nanoparticles homogeneously encapsulated in the hollow interior of N‐doped porous carbon nanofibers, as a high‐performance anode material is reported. The distinctive structure not only provides enough voids to accommodate the volume expansion of the pea‐like Fe₂O₃ nanoparticles but also offers a continuous conducting framework for electron transport and accessible nanoporous channels for fast diffusion and transport of Li/Na‐ions. As a consequence, this peapod‐like structure exhibits a stable discharge capacity of 1434 mAh g^?1 (at 100 mA g^?1) and 806 mAh g^?1 (at 200 mA g^?1) over 100 cycles as anode materials for LIBs and SIBs, respectively. More importantly, a stable capacity of 958 mAh g^?1 after 1000 cycles and 396 mAh g^?1 after 1500 cycles can be achieved for LIBs and SIBs, respectively, at a large current density of 2000 mA g^?1. This study provides a promising strategy for developing long‐cycle‐life LIBs and SIBs.     

Superior Sodium Storage in 3D Interconnected Nitrogen and Oxygen Dual‐Doped Carbon Network

Carbonaceous materials have attracted immense interest as anode materials for Na‐ion batteries (NIBs) because of their good chemical, thermal stabilities, as well as high Na‐storage capacity. However, the carbonaceous materials as anodes for NIBs still suffer from the lower rate capability and poor cycle life. An N,O‐dual doped carbon (denoted as NOC) network is designed and synthesized, which is greatly favorable for sodium storage. It exhibits high specific capacity and ultralong cycling stability, delivering a capacity of 545 mAh g^?1 at 100 mA g^?1 after 100 cycles and retaining a capacity of 240 mAh g^?1 at 2 A g^?1 after 2000 cycles. The NOC composite with 3D well‐defined porosity and N,O‐dual doped induces active sites, contributing to the enhanced sodium storage. In addition, the NOC is synthesized through a facile solution process, which can be easily extended to the preparation of many other N,O‐dual doped carbonaceous materials for wide applications in catalysis, energy storage, and solar cells.     

3D Graphene Networks Encapsulated with Ultrathin SnS Nanosheets@Hollow Mesoporous Carbon Spheres Nanocomposite with Pseudocapacitance‐Enhanced Lithium and Sodium Storage Kinetics

The lithium and sodium storage performances of SnS anode often undergo rapid capacity decay and poor rate capability owing to its huge volume fluctuation and structural instability upon the repeated charge/discharge processes. Herein, a novel and versatile method is described for in situ synthesis of ultrathin SnS nanosheets inside and outside hollow mesoporous carbon spheres crosslinked reduced graphene oxide networks. Thus, 3D honeycomb‐like network architecture is formed. Systematic electrochemical studies manifest that this nanocomposite as anode material for lithium‐ion batteries delivers a high charge capacity of 1027 mAh g^?1 at 0.2 A g^?1 after 100 cycles. Meanwhile, the as‐developed nanocomposite still retains a charge capacity of 524 mAh g^?1 at 0.1 A g^?1 after 100 cycles for sodium‐ion batteries. In addition, the electrochemical kinetics analysis verifies the basic principles of enhanced rate capacity. The appealing electrochemical performance for both lithium‐ion batteries and sodium‐ion batteries can be mainly related to the porous 3D interconnected architecture, in which the nanoscale SnS nanosheets not only offer decreased ion diffusion pathways and fast Li⁺/Na⁺ transport kinetics, but also the 3D interconnected conductive networks constructed from the hollow mesoporous carbon spheres and reduced graphene oxide enhance the conductivity and ensure the structural integrity.     

Room‐Temperature Liquid Metal Confined in MXene Paper as a Flexible,Freestanding, and Binder‐Free Anode for Next‐Generation Lithium‐Ion Batteries

Exploring flexible lithium‐ion batteries is required with the ever‐increasing demand for wearable and portable electronic devices. Selecting a flexible conductive substrate accompanying with closely coupled active materials is the key point. Here, a lightweight, flexible, and freestanding MXene/liquid metal paper is fabricated by confining 3 °C GaInSnZn liquid metal in the matrix of MXene paper without any binder or conductive additive. When used as anode for lithium‐ion cells, it can deliver a high discharge capacity of 638.79 mAh g^?1 at 20 mA g^?1. It also exhibits satisfactory rate capacities, with discharge capacities of 507.42, 483.33, 480.22, 452.30, and 404.47 mAh g^?1 at 50, 100, 200, 500, and 1000 mA g^?1, respectively. The cycling performance is obviously improved by slightly reducing the charge–discharge voltage range. The composite paper also has better electrochemical performance than liquid metal coated Cu foil. This study proposes a novel flexible anode by a clever combination of MXene paper and low‐melting point liquid metal, paving the way for next‐generation lithium‐ion batteries.     

Tin Nanodots Derived From Sn2+/Graphene Quantum Dot Complex as Pillars into Graphene Blocks for Ultrafast and Ultrastable Sodium‐Ion Storage

Tin (Sn) is considered to be an ideal candidate for the anode of sodium ion batteries. However, the design of Sn‐based electrodes with maintained long‐term stability still remains challenging due to their huge volume expansion (≈420%) and easy pulverization during cycling. Herein, a facile and versatile strategy for the synthesis of nitrogen‐doped graphene quantum dot (GQD) edge‐anchored Sn nanodots as the pillars into reduced graphene oxide blocks (NGQD/Sn‐NG) for ultrafast and ultrastable sodium‐ion storage is reported. Sn nanodots (2–5 nm) anchored at the edges of “octopus‐like” GQDs via covalent Sn? O? C/Sn? N? C bonds function as the pillars that ensure fast Na‐ion/electron transport across the graphene blocks. Moreover, the chemical and spatial (layered structure) confinements not only suppress Sn aggregation, but also function as physical barriers for buffering volume change upon sodiation/desodiation. Consequently, the NGQD/Sn‐NG with high structural stability exhibits excellent rate performance (555 mAh g^?1 at 0.1 A g^?1 and 198 mAh g^?1 at 10 A g^?1) and ultra‐long cycling stability (184 mAh g^?1 remaining even after 2000 cycles at 5 A g^?1). The confinement‐induced synthesis together with remarkable electrochemical performances should shed light on the practical application of highly attractive tin‐based anodes for next generation rechargeable sodium batteries.     

Graphene‐Bonded and ‐Encapsulated Si Nanoparticles for Lithium Ion Battery Anodes

Silicon (Si) has been considered a very promising anode material for lithium ion batteries due to its high theoretical capacity. However, high‐capacity Si nanoparticles usually suffer from low electronic conductivity, large volume change, and severe aggregation problems during lithiation and delithiation. In this paper, a unique nanostructured anode with Si nanoparticles bonded and wrapped by graphene is synthesized by a one‐step aerosol spraying of surface‐modified Si nanoparticles and graphene oxide suspension. The functional groups on the surface of Si nanoparticles (50–100 nm) not only react with graphene oxide and bind Si nanoparticles to the graphene oxide shell, but also prevent Si nanoparticles from aggregation, thus contributing to a uniform Si suspension. A homogeneous graphene‐encapsulated Si nanoparticle morphology forms during the aerosol spraying process. The open‐ended graphene shell with defects allows fast electrochemical lithiation/delithiation, and the void space inside the graphene shell accompanied by its strong mechanical strength can effectively accommodate the volume expansion of Si upon lithiation. The graphene shell provides good electronic conductivity for Si nanoparticles and prevents them from aggregating during charge/discharge cycles. The functionalized Si encapsulated by graphene sample exhibits a capacity of 2250 mAh g^?1 (based on the total mass of graphene and Si) at 0.1C and 1000 mAh g^?1 at 10C, and retains 85% of its initial capacity even after 120 charge/discharge cycles. The exceptional performance of graphene‐encapsulated Si anodes combined with the scalable and one‐step aerosol synthesis technique makes this material very promising for lithium ion batteries.     

An Advanced MoS2/Carbon Anode for High‐Performance Sodium‐Ion Batteries

Molybdenum disulfide (MoS₂) is a promising anode for high performance sodium‐ion batteries due to high specific capacity, abundance, and low cost. However, poor cycling stability, low rate capability and unclear electrochemical reaction mechanism are the main challenges for MoS₂ anode in Na‐ion batteries. In this study, molybdenum disulfide/carbon (MoS₂/C) nanospheres are fabricated and used for Na‐ion battery anodes. MoS₂/C nanospheres deliver a reversible capacity of 520 mAh g^?1 at 0.1 C and maintain at 400 mAh g^?1 for 300 cycles at a high current density of 1 C, demonstrating the best cycling performance of MoS₂ for Na‐ion batteries to date. The high capacity is attributed to the short ion and electron diffusion pathway, which enables fast charge transfer and low concentration polarization. The stable cycling performance and high coulombic efficiency (～100%) of MoS₂/C nanospheres are ascribed to (1) highly reversible conversion reaction of MoS₂ during sodiation/desodiation as evidenced by ex‐situ X‐ray diffraction (XRD) and (2) the formation of a stable solid electrolyte interface (SEI) layer in fluoroethylene carbonate (FEC) based electrolyte as demonstrated by fourier transform infrared spectroscopy (FTIR) measurements.     

Flexible and Binder‐Free Electrodes of Sb/rGO and Na3V2(PO4)3/rGO Nanocomposites for Sodium‐Ion Batteries

Flexible power sources have shown great promise in next‐generation bendable, implantable, and wearable electronic systems. Here, flexible and binder‐free electrodes of Na₃V₂(PO₄)₃/reduced graphene oxide (NVP/rGO) and Sb/rGO nanocomposites for sodium‐ion batteries are reported. The Sb/rGO and NVP/rGO paper electrodes with high flexibility and tailorability can be easily fabricated. Sb and NVP nanoparticles are embedded homogenously in the interconnected framework of rGO nanosheets, which provides structurally stable hosts for Na‐ion intercalation and deintercalation. The NVP/rGO paper‐like cathode delivers a reversible capacity of 113 mAh g^?1 at 100 mA g^?1 and high capacity retention of ≈96.6% after 120 cycles. The Sb/rGO paper‐like anode gives a highly reversible capacity of 612 mAh g^?1 at 100 mA g^?1, an excellent rate capacity up to 30 C, and a good cycle performance. Moreover, the sodium‐ion full cell of NVP/rGO//Sb/rGO has been fabricated, delivering a highly reversible capacity of ≈400 mAh g^?1 at a current density of 100 mA g^?1 after 100 charge/discharge cycles. This work may provide promising electrode candidates for developing next‐generation energy‐storage devices with high capacity and long cycle life.     

A Novel Potassium‐Ion‐Based Dual‐Ion Battery

In this work, combining both advantages of potassium‐ion batteries and dual‐ion batteries, a novel potassium‐ion‐based dual‐ion battery (named as K‐DIB) system is developed based on a potassium‐ion electrolyte, using metal foil (Sn, Pb, K, or Na) as anode and expanded graphite as cathode. When using Sn foil as the anode, the K‐DIB presents a high reversible capacity of 66 mAh g^?1 at a current density of 50 mA g^?1 over the voltage window of 3.0–5.0 V, and exhibits excellent long‐term cycling performance with 93% capacity retention for 300 cycles. Moreover, as the Sn foil simultaneously acts as the anode material and the current collector, dead load and dead volume of the battery can be greatly reduced, thus the energy density of the K‐DIB is further improved. It delivers a high energy density of 155 Wh kg^?1 at a power density of 116 W kg^?1, which is comparable with commercial lithium‐ion batteries. Thus, with the advantages of environmentally friendly, cost effective, and high energy density, this K‐DIB shows attractive potential for future energy storage application.     

Tin Sulfide‐Based Nanohybrid for High‐Performance Anode of Sodium‐Ion Batteries

Nanohybrid anode materials for Na‐ion batteries (NIBs) based on conversion and/or alloying reactions can provide significantly improved energy and power characteristics, while suffering from low Coulombic efficiency and unfavorable voltage properties. An NIB paper‐type nanohybrid anode (PNA) based on tin sulfide nanoparticles and acid‐treated multiwalled carbon nanotubes is reported. In 1 m NaPF₆ dissolved in diethylene glycol dimethyl ether as an electrolyte, the above PNA shows a high reversible capacity of ≈1200 mAh g^?1 and a large voltage plateau corresponding to a capacity of ≈550 mAh g^?1 in the low‐voltage region of ≈0.1 V versus Na⁺/Na, exhibiting high rate capabilities at a current rate of 1 A g^?1 and good cycling performance over 250 cycles. In addition, the PNA exhibits a high first Coulombic efficiency of ≈90%, achieving values above 99% during subsequent cycles. Furthermore, the feasibility of PNA usage is demonstrated by full‐cell tests with a reported cathode, which results in high specific energy and power values of ≈256 Wh kg^?1 and 471 W kg^?1, respectively, with stable cycling.     

A Novel Approach to Realize Si‐Based Porous Wire‐In‐Tube Nanostructures for High‐Performance Lithium‐Ion Batteries

Hollow inorganic nanostructures have drawn great attention due to their fascinating features, such as large surface area, high loading capacity, and high permeability. The formation, characterization, and application of partially and entirely hollow structure by applying a Si‐based reactive ion deposition and etching method on silicon nanowire as a template are reported. This fabrication technique is extended to a stainless steel substrate to be used as the binder‐free anode for high capacity and high rate lithium‐ion batteries. The electrochemical analyses exhibit that in addition to the high initial discharge capacity of 4125 mAh g^?1 at a rate of C/16, the best performing electrode shows discharge/charge capacity of as high as 3302.14/2832.1 mAh g^?1, respectively, with an excellent charge capacity retention of 96.7% over 100 cycles at a rate density of 1 C. Even at a rate of 12 C, the as‐designed structure is still able to deliver an impressive 1553 mAh g^?1, which probably is attributed to fast lithium diffusion in its hollow part and high porosity of Si and alumina layer. It is proved that the change in hollowness ratio significantly affects capacity retention and average coulombic efficiency of the lithium‐ion cells.     

Necklace‐Like Structures Composed of Fe3N@C Yolk–Shell Particles as an Advanced Anode for Sodium‐Ion Batteries

It is of great importance to develop cost‐effective electrode materials for large‐scale use of Na‐ion batteries. Here, a binder‐free electrode based on necklace‐like structures composed of Fe₃N@C yolk–shell particles as an advanced anode for Na‐ion batteries is reported. In this electrode, every Fe₃N@C unit has a novel yolk–shell structure, which can accommodate the volumetric changes of Fe₃N during the (de)sodiation processes for superior structural integrity. Moreover, all reaction units are threaded along the carbon fibers, guaranteeing excellent kinetics for the electrochemical reactions. As a result, when evaluated as an anode material for Na‐ion batteries, the Fe₃N@C nano‐necklace electrode delivers a prolonged cycle life over 300 cycles, and achieves a high C‐rate capacity of 248 mAh g^?1 at 2 A g^?1.     

Unique Cobalt Sulfide/Reduced Graphene Oxide Composite as an Anode for Sodium‐Ion Batteries with Superior Rate Capability and Long Cycling Stability

Exploitation of high‐performance anode materials is essential but challenging to the development of sodium‐ion batteries (SIBs). Among all proposed anode materials for SIBs, sulfides have been proved promising candidates due to their unique chemical and physical properties. In this work, a facile solvothermal method to in situ decorate cobalt sulfide (CoS) nanoplates on reduced graphene oxide (rGO) to build CoS@rGO composite is described. When evaluated as anode for SIBs, an impressive high specific capacity (540 mAh g^?1 at 1 A g^?1), excellent rate capability (636 mAh g^?1 at 0.1 A g^?1 and 306 mAh g^?1 at 10 A g^?1), and extraordinarily cycle stability (420 mAh g^?1 at 1 A g^?1 after 1000 cycles) have been demonstrated by CoS@rGO composite for sodium storage. The synergetic effect between the CoS nanoplates and rGO matrix contributes to the enhanced electrochemical performance of the hybrid composite. The results provide a facile approach to fabricate promising anode materials for high‐performance SIBs.     

CuO Nanoplates for High‐Performance Potassium‐Ion Batteries

Potassium‐ion batteries (KIBs) are promising alternatives to lithium‐ion batteries because of the abundance and low cost of K. However, an important challenge faced by KIBs is the search for high‐capacity materials that can hold large‐diameter K ions. Herein, copper oxide (CuO) nanoplates are synthesized as high‐performance anode materials for KIBs. CuO nanoplates with a thickness of ≈20 nm afford a large electrode–electrolyte contact interface and short K⁺ ion diffusion distance. As a consequence, a reversible capacity of 342.5 mAh g^?1 is delivered by the as‐prepared CuO nanoplate electrode at 0.2 A g^?1. Even after 100 cycles at a high current density of 1.0 A g^?1, the capacity of the electrode remains over 206 mAh g^?1, which is among the best values for KIB anodes reported in the literature. Moreover, a conversion reaction occurs at the CuO anode. Cu nanoparticles form during the first potassiation process and reoxidize to Cu₂O during the depotassiation process. Thereafter, the conversion reaction proceeds between the as‐formed Cu₂O and Cu, yielding a reversible theoretical capacity of 374 mAh g^?1. Considering their low cost, easy preparation, and environmental benignity, CuO nanoplates are promising KIB anode materials.     

Composition and Architecture Design of Double‐Shelled Co0.85Se1−xSx@Carbon/Graphene Hollow Polyhedron with Superior Alkali (Li,Na, K)‐Ion Storage

The exploration of materials with reversible and stable electrochemical performance is crucial in energy storage, which can (de) intercalate all the alkali‐metal ions (Li⁺, Na⁺, and K⁺). Although transition‐metal chalcogenides are investigated continually, the design and controllable preparation of hierarchical nanostructure and subtle composite withstable properties are still great challenges. Herein, component‐optimal Co_0.85Se_1?xS_x nanoparticles are fabricated by in situ sulfidization of metal organic framework, which are wrapped by the S‐doped graphene, constructing a hollow polyhedron framework with double carbon shells (CoSSe@C/G). Benefiting from the synergistic effect of composition regulation and architecture design by S‐substitution, the electrochemical kinetic is enhanced by the boosted electrochemistry‐active sites, and the volume variation is mitigated by the designed structure, resulting in the advanced alkali‐ion storage performance. Thus, it delivers an outstanding reversible capacity of 636.2 mAh g^?1 at 2 A g^?1 after 1400 cycles for Li‐ion batteries. Remarkably, satisfactory initial charge capacities of 548.1 and 532.9 mAh g^?1 at 0.1 A g^?1 can be obtained for Na‐ion and K‐ion batteries, respectively. The prominent performance combined with the theory calculation confirms that the synergistic strategy can improve the alkali‐ion transportation and structure stability, providing an instructive guide for designing high‐performance anode materials for universal alkali‐ion storage.     

Exposing {010} Active Facets by Multiple‐Layer Oriented Stacking Nanosheets for High‐Performance Capacitive Sodium‐Ion Oxide Cathode

As one of the most promising cathodes for rechargeable sodium‐ion batteries (SIBs), O3‐type layered transition metal oxides commonly suffer from inevitably complicated phase transitions and sluggish kinetics. Here, a Na[Li_0.05Ni_0.3Mn_0.5Cu_0.1Mg_0.05]O₂ cathode material with the exposed {010} active facets by multiple‐layer oriented stacking nanosheets is presented. Owing to reasonable geometrical structure design and chemical substitution, the electrode delivers outstanding rate performance (71.8 mAh g^?1 and 16.9 kW kg^?1 at 50C), remarkable cycling stability (91.9% capacity retention after 600 cycles at 5C), and excellent compatibility with hard carbon anode. Based on the combined analyses of cyclic voltammograms, ex situ X‐ray absorption spectroscopy, and operando X‐ray diffraction, the reaction mechanisms behind the superior electrochemical performance are clearly articulated. Surprisingly, Ni²⁺/Ni³⁺ and Cu²⁺/Cu³⁺ redox couples are simultaneously involved in the charge compensation with a highly reversible O3–P3 phase transition during charge/discharge process and the Na⁺ storage is governed by a capacitive mechanism via quantitative kinetics analysis. This optimal bifunctional regulation strategy may offer new insights into the rational design of high‐performance cathode materials for SIBs.