Near‐Infrared Fluorescence Hydrogen Peroxide Assay for Versatile Metabolite Biosensing in Whole Blood

In emergency medicine, blood lactate levels are commonly measured to assess the severity and response to treatment of hypoperfusion‐related diseases (e.g., sepsis, trauma, cardiac arrest). Clinical blood lactate testing is conducted with laboratory analyzers, leading to a delay of 3 h between triage and lactate result. Here, a fluorescence‐based blood lactate assay, which can be utilized for bedside testing, based on measuring the hydrogen peroxide generated by the enzymatic oxidation of lactate is described. To establish a hydrogen peroxide assay, near‐infrared cyanine derivatives are screened and sulfo‐cyanine 7 is identified as a new horseradish peroxidase (HRP) substrate, which loses its fluorescence in presence of HRP and hydrogen peroxide. As hydrogen peroxide is rapidly cleared by erythrocytic catalase and glutathione peroxidase, sulfo‐cyanine 7, HRP, and lactate oxidase are encapsulated in a liposomal reaction compartment. In lactate‐spiked bovine whole blood, the newly developed lactate assay exhibits a linear response in a clinically relevant range after 10 min. Substituting lactate oxidase with glucose and alcohol oxidase allows for blood glucose, ethanol, and methanol biosensing, respectively. This easy‐to‐use, rapid, and versatile assay may be useful for the quantification of a variety of enzymatically oxidizable metabolites, drugs, and toxic substances in blood and potentially other biological fluids.     

Optically Controlled Pore Formation in Self‐Sealing Giant Porphyrin Vesicles

Efforts to develop self‐contained microreactors and artificial cells have been limited by difficulty in generating membranes that can be robustly and repeatedly manipulated to load and release cargo from phospholipid compartments. Here we describe a purely optical method to form pores in a membrane generated from porphyrin‐phospholipid conjugates electro‐assembled into microscale giant porphyrin vesicles and manipulated using confocal microscopy. The pores in the membrane resealed within a minute allowing for repeated pore formation with precise spatial and temporal control and optical gating to allow selective diffusion of biomolecules across the membrane. Temporal control of pore formation was illustrated by performing sequential DNA hybridization reactions. A biotin‐avidin based strategy was developed to selectively attach enzymes to the interior of the vesicle, demonstrating spatial control and the potential of giant porphyrin vesicles as versatile microreactors.     

Intermolecular Chemistry in Solid Polymer Electrolytes for High‐Energy‐Density Lithium Batteries

Solid polymer electrolytes (SPEs) have aroused wide interest in lithium batteries because of their sufficient mechanical properties, superior safety performances, and excellent processability. However, ionic conductivity and high‐voltage compatibility of SPEs are still yet to meet the requirement of future energy‐storage systems, representing significant barriers to progress. In this regard, intermolecular interactions in SPEs have attracted attention, and they can significantly impact on the Li⁺ motion and frontier orbital energy level of SPEs. Recent advances in improving electrochemcial performance of SPEs are reviewed, and the underlying mechanism of these proposed strategies related to intermolecular interaction is discussed, including ion–dipole, hydrogen bonds, π–π stacking, and Lewis acid–base interactions. It is hoped that this review can inspire a deeper consideration on this critical issue, which can pave new pathway to improve ionic conductivity and high‐voltage performance of SPEs.     

One Step Synthesis of Gold‐Loaded Radial Mesoporous Silica Nanospheres and Supported Lipid Bilayer Functionalization: Towards Bio‐Multifunctional Sensors

A simple synthetic route is developed to achieve gold functionalized radial mesoporous silica nanoparticles (Au‐MsNP) synthesized by a one step procedure fully compatible with basic conditions required for the preparation of monodispersed nanospheres. In a second step, Au‐MsNP particles have been coated with phospholipid bilayers in order to design an advanced biofunctional platform with the gold metallic nanoparticles previously grown into the pore channels and responsible for a plasmonic activity relevant for biosensing. The size of Au‐MsNP is checked by dynamic light scattering while zeta potential measurements reflect their surface charge. The particle morphology is characterized by transmission and scanning electron microscopy and the Si/Au ratios are obtained from energy dispersive X‐ray analysis. The textural properties of Au‐MsNP, specific surface area and pore size, are determined from N₂ adsorption. The supported bilayers are achieved from vesicles of different phospholipids incubated with Au‐MsNP particles. The coating efficiency is investigated by zeta potential and cryo‐ transmission electron microscopy. The plasmonic activities of bare Au‐MsNP particles and coated lipid bilayer Au‐MsNP platform are evidenced for two model systems: direct adsorption of bovine serum albumin and molecular recognition events between avidin molecules and biotin receptors integrated in the supported lipid bilayer.     

Catalytic Nanomotors: Self‐Propelled Sphere Dimers

Experimental and theoretical studies of the self‐propelled motional dynamics of a new genre of catalytic sphere dimer, which comprises a non‐catalytic silica sphere connected to a catalytic platinum sphere, are reported for the first time. Using aqueous hydrogen peroxide as the fuel to effect catalytic propulsion of the sphere dimers, both quasi‐linear and quasi‐circular trajectories are observed in the solution phase and analyzed for different dimensions of the platinum component. In addition, well‐defined rotational motion of these sphere dimers is observed at the solution–substrate interface. The nature of the interaction between the sphere dimer and the substrate in the aqueous hydrogen peroxide phase is discussed. In computer simulations of the sphere dimer in solution and the solution–substrate interface, sphere‐dimer dynamics are simulated using molecular‐dynamics methods and solvent dynamics are modeled by mesoscopic multiparticle collision methods taking hydrodynamic interactions into account. The rotational and translational dynamics of the sphere dimer are found to be in good accord with the predictions of computer simulations.     

Single‐Molecule Manipulation in Zero‐Mode Waveguides

The mechanobiology of receptor–ligand interactions and force‐induced enzymatic turnover can be revealed by simultaneous measurements of force response and fluorescence. Investigations at physiologically relevant high labeled substrate concentrations require total internal reflection fluorescence microscopy or zero mode waveguides (ZMWs), which are difficult to combine with atomic force microscopy (AFM). A fully automatized workflow is established to manipulate single molecules inside ZMWs autonomously with noninvasive cantilever tip localization. A protein model system comprising a receptor–ligand pair of streptavidin blocked with a biotin‐tagged ligand is introduced. The ligand is pulled out of streptavidin by an AFM cantilever leaving the receptor vacant for reoccupation by freely diffusing fluorescently labeled biotin, which can be detected in single‐molecule fluorescence concurrently to study rebinding rates. This work illustrates the potential of the seamless fusion of these two powerful single‐molecule techniques.     

Protonation‐Assisted Exfoliation of N‐Containing 2D Conjugated Polymers

Ultrathin 2D conjugated polymer nanosheets are an emerging class of photocatalysts for solar‐to‐chemical energy conversion. Until now, the majority of ultrathin 2D polymer photocatalysts are produced through exfoliation of layered polymers. Unfortunately, it still remains a great challenge to exfoliate layered polymers into ultrathin nanosheets with high yields. In this work, a liquid‐phase protonation‐assisted exfoliation is demonstrated to enable remarkably improved exfoliation yields of various 2D N‐containing conjugated polymers such as g‐C₃N₄, C₂N, and aza‐CMP. The exfoliation yields are only 2–15% in pure water whereas they can be substantially improved to 41–56% in 12 m HCl. The exfoliated ultrathin nanosheets possess average thicknesses less than 5 nm and can be easily dispersed in aqueous solutions. More importantly, the exfoliated nanosheets exhibit significantly enhanced photocatalytic activity toward photocatalytic water splitting compared to their bulk counterparts. Further characterizations and computational calculations reveal that protonation of the heterocyclic nitrogen sites in the conjugated polymer frameworks can lead to strong hydrogen bonding between the polymer surfaces and water molecules, resulting in facilitated exfoliation of polymers into the liquid phase. This study unveils an important protocol toward producing ultrathin 2D N‐containing conjugated polymer nanosheets for future solar energy conversion.     

Thiophene‐Bridged Donor–Acceptor sp2‐Carbon‐Linked 2D Conjugated Polymers as Photocathodes for Water Reduction

Photoelectrochemical (PEC) water reduction, converting solar energy into environmentally friendly hydrogen fuel, requires delicate design and synthesis of semiconductors with appropriate bandgaps, suitable energy levels of the frontier orbitals, and high intrinsic charge mobility. In this work, the synthesis of a novel bithiophene‐bridged donor–acceptor‐based 2D sp²‐carbon‐linked conjugated polymer (2D CCP) is demonstrated. The Knoevenagel polymerization between the electron‐accepting building block 2,3,8,9,14,15‐hexa(4‐formylphenyl) diquinoxalino[2,3‐a:2′,3′‐c]phenazine (HATN‐6CHO) and the first electron‐donating linker 2,2′‐([2,2′‐bithiophene]‐5,5′‐diyl)diacetonitrile (ThDAN) provides the 2D CCP‐HATNThDAN (2D CCP‐Th). Compared with the corresponding biphenyl‐bridged 2D CCP‐HATN‐BDAN (2D CCP‐BD), the bithiophene‐based 2D CCP‐Th exhibits a wide light‐harvesting range (up to 674 nm), a optical energy gap (2.04 eV), and highest energy occupied molecular orbital–lowest unoccupied molecular orbital distributions for facilitated charge transfer, which make 2D CCP‐Th a promising candidate for PEC water reduction. As a result, 2D CCP‐Th presents a superb H₂‐evolution photocurrent density up to ≈7.9 µA cm^?2 at 0 V versus reversible hydrogen electrode, which is superior to the reported 2D covalent organic frameworks and most carbon nitride materials (0.09–6.0 µA cm^?2). Density functional theory calculations identify the thiophene units and cyano substituents at the vinylene linkage as active sites for the evolution of H₂.     

Synthesis and Superior Optical‐Limiting Properties of Fluorene‐Thiophene‐Benzothiadazole Polymer‐Functionalized Graphene Sheets

A polymer based on fluorene, thiophene, and benzothiadazole as the donor–spacer–acceptor triad is covalently coupled to reduced graphene oxide (rGO) sheets via diazonium coupling with phenyl bromide, followed by Suzuki coupling. These polymer–graphene hybrids show good solubility in organic solvents, such as chloroform, tetrahydrofuran (THF), toluene, dichlorobenzene, and N,N‐dimethylformamide (DMF), and exhibit an excellent optical‐limiting effect with a 532‐nm laser beam. The optical‐limiting threshold energy values (0.93 J cm^?2 for G–polymer 1 and 1.12 J cm^?2 for G–polymer 2) of these G–polymer hybrids are better than that of carbon nanotubes (3.6 J cm^?2).     

Pick‐and‐Place Assembly of Single Microtubules

Intracellular transport is affected by the filament network in the densely packed cytoplasm. Biophysical studies focusing on intracellular transport based on microtubule–kinesin system frequently use in vitro motility assays, which are performed either on individual microtubules or on random (or simple) microtubule networks. Assembling intricate networks with high flexibility requires the manipulation of 25 nm diameter microtubules individually, which can be achieved through the use of pick‐and‐place assembly. Although widely used to assemble tiny objects, pick‐and‐place is not a common practice for the manipulation of biological materials. Using the high‐level handling capabilities of microelectromechanical systems (MEMS) technology, tweezers are designed and fabricated to pick and place single microtubule filaments. Repeated picking and placing cycles provide a multilayered and multidirectional microtubule network even for different surface topographies. On‐demand assembly of microtubules forms crossings at desired angles for biophysical studies as well as complex networks that can be used as nanotransport systems.     

Healable and Mechanically Super‐Strong Polymeric Composites Derived from Hydrogen‐Bonded Polymeric Complexes

It is challenging to fabricate mechanically super‐strong polymer composites with excellent healing capacity because of the significantly limited mobility of polymer chains. The fabrication of mechanically super‐strong polymer composites with excellent healing capacity by complexing polyacrylic acid (PAA) with polyvinylpyrrolidone (PVPON) in aqueous solution followed by molding into desired shapes is presented. The coiled PVPON can complex with PAA in water via hydrogen‐bonding interactions to produce transparent PAA–PVPON composites homogenously dispersed with nanoparticles of PAA–PVPON complexes. As healable materials, the PAA–PVPON composite materials with a glass transition temperature of ≈107.9 °C exhibit a super‐high mechanical strength, with a tensile strength of ≈81 MPa and a Young's modulus of ≈4.5 GPa. The PAA–PVPON composites are stable in water because of the hydrophobic interactions among pyrrolidone groups. The super‐high mechanical strength of the PAA–PVPON composite materials originates from the highly dense hydrogen bonds between PAA and PVPON and the reinforcement of in situ formed PAA–PVPON nanoparticles. The reversibility of the relatively weak but dense hydrogen bonds enables convenient healing of the mechanically strong PAA–PVPON composite materials from physical damage to restore their original mechanical strength.     

Hydrogen Peroxide Responsive Iron–Based Nanoplatform for Multimodal Imaging–Guided Cancer Therapy

Cancer multimodal phototherapy triggered by hydrogen peroxide has attracted widespread attention as a dominating strategy to increase phototherapeutic efficiency. Herein, a hydrogen peroxide responsive iron oxide nanoplatform, with the diameter of about 50 nm, is fabricated to intracellularly trigger the Fenton reaction and achieve synergistic photodynamic therapy and photothermal therapy. The nanoplatform based on iron oxide nanoparticles is decorated with indocyanine green (ICG, photosensitizer) and hyaluronic acid (HA, targeting molecular) through electrostatic interaction, thus the as‐prepared nanoplatform (IONPs‐ICG‐HA) exhibits excellent active targeting ability and biocompatibility. More importantly, it can effectively utilize the intratumoral overproduced hydrogen peroxide to generate reactive oxygen species for cancer cell killing via intracellular Fenton reactions. In vitro and in vivo experiments reveal that the IONPs‐ICG‐HA nanocomposites realize effective photoacoustic/photothermal/fluorescence imaging–guided phototherapy, leading to promising hydrogen peroxide responsive cancer theranostics.     

Real‐Time Label‐Free Monitoring of Nanoparticle Cell Uptake

The surface plasmon resonance technique in combination with whole cell sensing is used for the first time for real‐time label‐free monitoring of nanoparticle cell uptake. The uptake kinetics of several types of nanoparticles relevant to drug delivery applications into HeLa cells is determined. The cell uptake of the nanoparticles is confirmed by confocal microscopy. The cell uptake of silica nanoparticles and polyethylenimine–plasmid DNA polyplexes is studied as a function of temperature, and the uptake energies are determined by Arrhenius plots. The phase transition temperature of the HeLa cell membrane is detected when monitoring cell uptake of silica nanoparticles at different temperatures. The HeLa cell uptake of the mesoporous silica nanoparticles is energy‐independent at temperatures slightly higher than the phase transition temperature of the HeLa cell membrane, while the uptake of polyethylenimine–DNA polyplexes is energy‐dependent and linear as a function of temperature with an activation energy of Ea = 62 ± 7 kJ mol^?1 = 15 ± 2 kcal mol^?1. The HeLa cell uptake of red blood cell derived extracellular vesicles is also studied as a function of the extracellular vesicle concentration. The results show a concentration dependent behavior reaching a saturation level of the extracellular vesicle uptake by HeLa cells.     

Preparation of Highly Monodisperse Monopatch Particles with Orthogonal Click‐Type Functionalization and Biorecognition

Patchy particles are next generation colloidal building blocks for self‐assembly and find further use as (bio) sensors. Progress in this direction crucially depends on developing straightforward preparation pathways able to provide patchy particles with highest uniformity and integrating precise, orthogonal, and spatially localized functionalizations to mediate interaction patterns. This continues to be one of the great challenges in colloid science. Herein, a method is shown utilizing functionalized random and block copolymers as microcontact printing inks to prepare patchy particles with outstanding control over patch size and quality. The polymeric nature and tight covalent attachment of the ink prevents flow of the ink over the particle during printing. This minimizes patch broadening and yields very small and extremely uniform patches, which is especially challenging for particle sizes below 10 μm. Click‐type (amine/active ester, alkyne/azide, biotin/avidin) reactions can be performed selectively on the patch or on the particle body, rendering the particles interesting for application in imaging, biomolecular detection, and as advanced precision colloid‐based building blocks.     

Reversible fluorescence quenching in carbon nanotubes for biomolecular sensing

Biosensing applications of single-walled carbon nanotubes have been demonstrated in solid-state device structures. Bioanalyte sensing schemes based on coupling of reversible nanotube fluorescence quenching to redox reactions paired to enzymatic peroxide generation have also been pursued. Here we show a new approach to highly sensitive nanotube-based optical sensing. Single-walled carbon nanotubes interacting with dye-ligand conjugates--a redox-active dye molecule that is covalently bound to a biological receptor ligand (such as biotin in this case)--showed fluorescence quenching. Further interaction between the receptor ligand on the conjugates and target analytes (avidin in this case) induced the recovery of the quenched fluorescence, forming the basis of the sensing scheme. Nanomolar sensitivity was attained with high specificity for the target analyte. This is a versatile approach because a wide range of conjugation possibilities exists between the potential receptors and redox quenchers.     

Autonomous Ex Novo Chemical Assembly with Blebbing and Division of Functional Polymer Vesicles from a “Homogeneous Mixture”

The chemical energy and radicals from an oscillating chemical reaction are used to synthesize a polymer vesicle from a homogeneous solution of monomeric units. Periodically formed radicals from the Belousov–Zhabotinsky (B–Z) reaction initiate radical polymerization between a polyethylene glycol based chain transfer agent (PEG‐CTA) and hydrophilic acrylonitrile monomers in water. The growth of a hydrophobic chain on the hydrophilic PEG chain induces self‐assembly of polymeric amphiphiles to form micrometer‐sized vesicles entrapping an active oscillating B–Z reaction. In our experimental conditions, the different chemical environments inside and outside the vesicles contribute to enlarge the area and diameter of the resulting self‐assembled vesicles and, in some cases, promote blebbing and division.     

High‐Throughput Phase‐Field Design of High‐Energy‐Density Polymer Nanocomposites

Understanding the dielectric breakdown behavior of polymer nanocomposites is crucial to the design of high‐energy‐density dielectric materials with reliable performances. It is however challenging to predict the breakdown behavior due to the complicated factors involved in this highly nonequilibrium process. In this work, a comprehensive phase‐field model is developed to investigate the breakdown behavior of polymer nanocomposites under electrostatic stimuli. It is found that the breakdown strength and path significantly depend on the microstructure of the nanocomposite. The predicted breakdown strengths for polymer nanocomposites with specific microstructures agree with existing experimental measurements. Using this phase‐field model, a high throughput calculation is performed to seek the optimal microstructure. Based on the high‐throughput calculation, a sandwich microstructure for PVDF–BaTiO₃ nanocomposite is designed, where the upper and lower layers are filled with parallel nanosheets and the middle layer is filled with vertical nanofibers. It has an enhanced energy density of 2.44 times that of the pure PVDF polymer. The present work provides a computational approach for understanding the electrostatic breakdown, and it is expected to stimulate future experimental efforts on synthesizing polymer nanocomposites with novel microstructures to achieve high performances.     

Click‐Chemistry Based Multi‐Component Microarrays by Quill‐Like Pens

We demonstrate the generation of multi‐component spot microarrays by blotting different ink solutions via quill‐like pens. The obtained arrays are immobilized by click‐chemistry in form of the copper(I)‐catalyzed azide‐alkyne cycloaddition and remain stable against washing and immersion in aqueous solution. The average spot radius ranges from 10 to 20 μm and is about an order of magnitude smaller than in currently commercially applied arraying techniques, effectively bridging the gap to high resolution methods as dip‐pen nanolithography and polymer pen lithography. The use of the quill‐like‐pen‐generated spot microarrays as binding assay is demonstrated by capturing of streptavidin from solution and by bioactive sandwich structures from neutravidin and biotin‐labeled fibronectin. Thus, our multi‐component spot microarrays have ideal dimensions and biochemical properties to accommodate (single) cells. Additionally, the building up of the cell‐recruiting protein sandwich structure on top of the basic spot microarray allows for the highly selective adhesion of fibroblasts. This results then in ordered (single) cell arrays, demonstrating the bio‐compatibility and high throughput of this multi‐component spot microarray platform.     

Stabilization of Polymer‐Hydrogel Capsules via Thiol–Disulfide Exchange

Polymer hydrogels are used in diverse biomedical applications including drug delivery and tissue engineering. Among different chemical linkages, the natural and reversible thiol–disulfide interconversion is extensively explored to stabilize hydrogels. The creation of macro‐, micro‐, and nanoscale disulfide‐stabilized hydrogels commonly relies on the use of oxidizing agents that may have a detrimental effect on encapsulated cargo. Herein an oxidization‐free approach to create disulfide‐stabilized polymer hydrogels via a thiol–disulfide exchange reaction is reported. In particular, thiolated poly(methacrylic acid) is used and the conditions of polymer crosslinking in solution and on colloidal porous and solid microparticles are established. In the latter case, removal of the core particles yields stable, hollow, disulfide‐crosslinked hydrogel capsules. Further, a procedure is developed to achieve efficient disulfide crosslinking of multilayered polymer films to obtain stable, liposome‐loaded polymer‐hydrogel capsules that contain functional enzymatic cargo within the liposomal subcompartments. This approach is envisaged to facilitate the development of biomedical applications of hydrogels, specifically those including fragile cargo.     

Ultrafast Killing and Self‐Gelling Antimicrobial Imidazolium Oligomers

Infectious diseases and the increasing threat of worldwide pandemics have underscored the importance of antibiotics and hygiene. Intensive efforts have been devoted to developing new antibiotics to meet the rapidly growing demand. In particular, advancing the knowledge of the structure–property–activity relationship is critical to expedite the design and development of novel antimicrobial with the needed potential and efficacy. Herein, a series of new antimicrobial imidazolium oligomers are developed with the rational manipulation of terminal group's hydrophobicity. These materials exhibit superior activity, excellent selectivity, ultrafast killing (>99.7% killing within 30 s), and desirable self‐gelling properties. Molecular dynamic simulations reveal the delicate effect of structural changes on the translocation motion across the microbial cell membrane. The energy barrier of the translocation process analyzed by free energy calculations provides clear kinetic information to suggest that the spontaneous penetration requires a very short timescale of seconds to minutes for the new imidazolium oligomers.