Ultrathin Cobalt Oxide Layers as Electrocatalysts for High‐Performance Flexible Zn–Air Batteries

Synergistic improvements in the electrical conductivity and catalytic activity for the oxygen reduction reaction (ORR)/oxygen evolution reaction (OER) are of paramount importance for rechargeable metal–air batteries. In this study, one‐nanometer‐scale ultrathin cobalt oxide (CoO_x) layers are fabricated on a conducting substrate (i.e., a metallic Co/N‐doped graphene substrate) to achieve superior bifunctional activity in both the ORR and OER and ultrahigh output power for flexible Zn–air batteries. Specifically, at the atomic scale, the ultrathin CoO_x layers effectively accelerate electron conduction and provide abundant active sites. X‐ray absorption spectroscopy reveals that the metallic Co/N‐doped graphene substrate contributes to electron transfer toward the ultrathin CoO_x layer, which is beneficial for the electrocatalytic process. The as‐obtained electrocatalyst exhibits ultrahigh electrochemical activity with a positive half‐wave potential of 0.896 V for ORR and a low overpotential of 370 mV at 10 mA cm^?2 for OER. The flexible Zn–air battery built with this catalyst exhibits an ultrahigh specific power of 300 W g_cat ^?1, which is essential for portable devices. This work provides a new design pathway for electrocatalysts for high‐performance rechargeable metal–air battery systems.     

Pseudocapacitive Ni‐Co‐Fe Hydroxides/N‐Doped Carbon Nanoplates‐Based Electrocatalyst for Efficient Oxygen Evolution

The oxygen evolution reaction (OER) catalytic activity of a transition metal oxides/hydroxides based electrocatalyst is related to its pseudocapacitance at potentials lower than the OER standard potential. Thus, a well‐defined pseudocapacitance could be a great supplement to boost OER. Herein, a highly pseudocapacitive Ni‐Fe‐Co hydroxides/N‐doped carbon nanoplates (NiCoFe‐NC)‐based electrocatalyst is synthesized using a facile one‐pot solvothermal approach. The NiCoFe‐NC has a great pseudocapacitive performance with 1849 F g^?1 specific capacitance and 31.5 Wh kg^?1 energy density. This material also exhibits an excellent OER catalytic activity comparable to the benchmark RuO₂ catalysts (an initiating overpotential of 160 mV and delivering 10 mA cm^?2 current density at 250 mV, with a Tafel slope of 31 mV dec^?1). The catalytic performance of the optimized NiCoFe‐NC catalyst could keep 24 h. X‐ray photoelectron spectroscopy, electrochemically active surface area, and other physicochemical and electrochemical analyses reveal that its great OER catalytic activity is ascribed to the Ni‐Co hydroxides with modular 2‐Dimensional layered structure, the synergistic interactions among the Fe(III) species and Ni, Co metal centers, and the improved hydrophily endowed by the incorporation of N‐doped carbon hydrogel. This work might provide a useful and general strategy to design and synthesize high‐performance metal (hydr)oxides OER electrocatalysts.     

Single Fe Atom on Hierarchically Porous S,N‐Codoped Nanocarbon Derived from Porphyra Enable Boosted Oxygen Catalysis for Rechargeable Zn‐Air Batteries

Iron–nitrogen–carbon materials (Fe–N–C) are known for their excellent oxygen reduction reaction (ORR) performance. Unfortunately, they generally show a laggard oxygen evolution reaction (OER) activity, which results in a lethargic charging performance in rechargeable Zn–air batteries. Here porous S‐doped Fe–N–C nanosheets are innovatively synthesized utilizing a scalable FeCl₃‐encapsulated‐porphyra precursor pyrolysis strategy. The obtained electrocatalyst exhibits ultrahigh ORR activity (E_1/2 = 0.84 V vs reversible hydrogen electrode) and impressive OER performance (E_{j = 10} = 1.64 V). The potential gap (ΔE = E_{j = 10} ? E_1/2) is 0.80 V, outperforming that of most highly active bifunctional electrocatalysts reported to date. Furthermore, the key role of S involved in the atomically dispersed Fe–Nx species on the enhanced ORR and OER activities is expounded for the first time by ultrasound‐assisted extraction of the exclusive S source (taurine) from porphyra. Moreover, the assembled rechargeable Zn–air battery comprising this bifunctional electrocatalyst exhibits higher power density (225.1 mW cm^?2) and lower charging–discharging overpotential (1.00 V, 100 mA cm^?2 compared to Pt/C + RuO₂ catalyst). The design strategy can expand the utilization of earth‐abundant biomaterial‐derived catalysts, and the mechanism investigations of S doping on the structure–activity relationship can inspire the progress of other functional electrocatalysts.     

Reduced Graphene Oxide‐Wrapped Co9–xFexS8/Co,Fe‐N‐C Composite as Bifunctional Electrocatalyst for Oxygen Reduction and Evolution

Searching for highly efficient bifunctional electrocatalysts for the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) using nonnoble metal‐based catalysts is essential for the development of many energy conversion systems, including rechargeable fuel cells and metal–air batteries. Here, Co_9–xFe_xS₈/Co,Fe‐N‐C hybrids wrapped by reduced graphene oxide (rGO) (abbreviated as S‐Co_9–xFe_xS₈@rGO) are synthesized through a semivulcanization and calcination method using graphene oxide (GO) wrapped bimetallic zeolite imidazolate framework (ZIF) Co,Fe‐ZIF (CoFe‐ZIF@GO) as precursors. Benefiting from the synergistic effect of OER active CoFeS and ORR active Co,Fe‐N‐C in a single component, as well as high dispersity and enhanced conductivity derived from rGO coating and Fe‐doping, the obtained S‐Co_9–xFe_xS₈@rGO‐10 catalyst shows an ultrasmall overpotential of ≈0.29 V at 10 mA cm^?2 in OER and a half‐wave potential of 0.84 V in ORR, combining a superior oxygen electrode activity of ≈0.68 V in 0.1 m KOH.     

“Wiring” Fe‐Nx‐Embedded Porous Carbon Framework onto 1D Nanotubes for Efficient Oxygen Reduction Reaction in Alkaline and Acidic Media

This study presents a novel metal‐organic‐framework‐engaged synthesis route based on porous tellurium nanotubes as a sacrificial template for hierarchically porous 1D carbon nanotubes. Furthermore, an ultrathin Fe‐ion‐containing polydopamine layer has been introduced to generate highly effective FeN_xC active sites into the carbon framework and to induce a high degree of graphitization. The synergistic effects between the hierarchically porous 1D carbon structure and the embedded FeN_xC active sites in the carbon framework manifest in superior catalytic activity toward oxygen reduction reaction (ORR) compared to Pt/C catalyst in both alkaline and acidic media. A rechargeable zinc‐air battery assembled in a decoupled configuration with the nonprecious pCNT@Fe@GL/CNF ORR electrode and Ni‐Fe LDH/NiF oxygen evolution reaction (OER) electrode exhibits charge–discharge overpotentials similar to the counterparts of Pt/C ORR electrode and IrO₂ OER electrode.     

Atomic‐Level Fe‐N‐C Coupled with Fe3C‐Fe Nanocomposites in Carbon Matrixes as High‐Efficiency Bifunctional Oxygen Catalysts

Highly active and durable bifunctional oxygen electrocatalysts are of pivotal importance for clean and renewable energy conversion devices, but the lack of earth‐abundant electrocatalysts to improve the intrinsic sluggish kinetic process of oxygen reduction/evolution reactions (ORR/OER) is still a challenge. Fe‐N‐C catalysts with abundant natural merits are considered as promising alternatives to noble‐based catalysts, yet further improvements are urgently needed because of their poor stability and unclear catalytic mechanism. Here, an atomic‐level Fe‐N‐C electrocatalyst coupled with low crystalline Fe₃C‐Fe nanocomposite in 3D carbon matrix (Fe‐SAs/Fe₃C‐Fe@NC) is fabricated by a facile and scalable method. Versus atomically FeN_x species and crystallized Fe₃C‐Fe nanoparticles, Fe‐SAs/Fe₃C‐Fe@NC catalyst, abundant in vertical branched carbon nanotubes decorated on intertwined carbon nanofibers, exhibits high electrocatalytic activities and excellent stabilities both in ORR (E_1/2, 0.927 V) and OER (E_J=10, 1.57 V). This performance benefits from the strong synergistic effects of multicomponents and the unique structural advantages. In‐depth X‐ray absorption fine structure analysis and density functional theory calculation further demonstrate that more extra charges derived from modified Fe clusters decisively promote the ORR/OER performance for atomically FeN₄ configurations by enhanced oxygen adsorption energy. These insightful findings inspire new perspectives for the rational design and synthesis of economical–practical bifunctional oxygen electrocatalysts.     

Controllable Construction of Core–Shell Polymer@Zeolitic Imidazolate Frameworks Fiber Derived Heteroatom‐Doped Carbon Nanofiber Network for Efficient Oxygen Electrocatalysis

Designing rational nanostructures of metal–organic frameworks based carbon materials to promote the bifunctional catalytic activity of the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) is highly desired but still remains a great challenge. Herein, an in situ growth method to achieve 1D structure‐controllable zeolitic imidazolate frameworks (ZIFs)/polyacrylonitrile (PAN) core/shell fiber (PAN@ZIFs) is developed. Subsequent pyrolysis of this precursor can obtain a heteroatom‐doped carbon nanofiber network as an efficient bifunctional oxygen electrocatalyst. The electrocatalytic performance of derived carbon nanofiber is dominated by the structures of PAN@ZIFs fiber, which is facilely regulated by efficiently controlling the nucleation and growth process of ZIFs on the surface of polymer fiber as well as optimizing the components of ZIFs. Benefiting from the core–shell structures with appropriate dopants and porosity, as‐prepared catalysts show brilliant bifunctional ORR/OER catalytic activity and durability. Finally, the rechargeable Zn‐air battery assembled from the optimized catalyst (CNF@Zn/CoNC) displays a peak power density of 140.1 mW cm^?2, energy density of 878.9 Wh kg_Zn^?1, and excellent cyclic stability over 150 h, giving a promising performance in realistic application.     

Bifunctional Transition Metal Hydroxysulfides: Room‐Temperature Sulfurization and Their Applications in Zn–Air Batteries

Bifunctional electrocatalysis for oxygen evolution reaction (OER) and oxygen reduction reaction (ORR) constitutes the bottleneck of various sustainable energy devices and systems like rechargeable metal–air batteries. Emerging catalyst materials are strongly requested toward superior electrocatalytic activities and practical applications. In this study, transition metal hydroxysulfides are presented as bifunctional OER/ORR electrocatalysts for Zn–air batteries. By simply immersing Co‐based hydroxide precursor into solution with high‐concentration S^2?, transition metal hydroxides convert to hydroxysulfides with excellent morphology preservation at room temperature. The as‐obtained Co‐based metal hydroxysulfides are with high intrinsic reactivity and electrical conductivity. The electron structure of the active sites is adjusted by anion modulation. The potential for 10 mA cm^?2 OER current density is 1.588 V versus reversible hydrogen electrode (RHE), and the ORR half‐wave potential is 0.721 V versus RHE, with a potential gap of 0.867 V for bifunctional oxygen electrocatalysis. The Co₃FeS_1.5(OH)₆ hydroxysulfides are employed in the air electrode for a rechargeable Zn–air battery with a small overpotential of 0.86 V at 20.0 mA cm^?2, a high specific capacity of 898 mAh g^?1, and a long cycling life, which is much better than Pt and Ir‐based electrocatalyst in Zn–air batteries.     

Electrosynthesis of Hydrogen Peroxide Synergistically Catalyzed by Atomic Co–Nx–C Sites and Oxygen Functional Groups in Noble‐Metal‐Free Electrocatalysts

Hydrogen peroxide (H₂O₂) is a green oxidizer widely involved in a vast number of chemical reactions. Electrochemical reduction of oxygen to H₂O₂ constitutes an environmentally friendly synthetic route. However, the oxygen reduction reaction (ORR) is kinetically sluggish and undesired water serves as the main product on most electrocatalysts. Therefore, electrocatalysts with high reactivity and selectivity are highly required for H₂O₂ electrosynthesis. In this work, a synergistic strategy is proposed for the preparation of H₂O₂ electrocatalysts with high ORR reactivity and high H₂O₂ selectivity. A Co?N_x?C site and oxygen functional group comodified carbon‐based electrocatalyst (named as Co–POC–O) is synthesized. The Co–POC–O electrocatalyst exhibits excellent catalytic performance for H₂O₂ electrosynthesis in O₂‐saturated 0.10 m KOH with a high selectivity over 80% as well as very high reactivity with an ORR potential at 1 mA cm^?2 of 0.79 V versus the reversible hydrogen electrode (RHE). Further mechanism study identifies that the Co?N_x?C sites and oxygen functional groups contribute to the reactivity and selectivity for H₂O₂ electrogeneration, respectively. This work affords not only an emerging strategy to design H₂O₂ electrosynthesis catalysts with remarkable performance, but also the principles of rational combination of multiple active sites for green and sustainable synthesis of chemicals through electrochemical processes.     

Co Nanoparticles Confined in 3D Nitrogen‐Doped Porous Carbon Foams as Bifunctional Electrocatalysts for Long‐Life Rechargeable Zn–Air Batteries

Proper design and simple preparation of nonnoble bifunctional electrocatalysts with high cost performance and strong durability for the oxygen reduction reaction (ORR) and the oxygen evolution reaction (OER) is highly demanded but still full of enormous challenges. In this work, a spontaneous gas‐foaming strategy is presented to synthesize cobalt nanoparticles confined in 3D nitrogen‐doped porous carbon foams (CoNCF) by simply carbonizing the mixture of citric acid, NH₄Cl, and Co(NO₃)₂·6H₂O. Thanks to its particular 3D porous foam architecture, ultrahigh specific surface area (1641 m² g^?1), and homogeneous distribution of active sites (C–N, Co–N_x, and Co–O moieties), the optimized CoNCF‐1000‐80 (carbonized at 1000 °C, containing 80 mg Co(NO₃)₂·6H₂O in precursors) catalyst exhibits a remarkable bifunctional activity and long‐term durability toward both ORR and OER. Its bifunctional activity parameter (ΔE) is as low as 0.84 V, which is much smaller than that of noble metal catalyst and comparable to state‐of‐the‐art bifunctional catalysts. When worked as an air electrode catalyst in rechargeable Zn–air batteries, a high energy density (797 Wh kg^?1), a low charge/discharge voltage gap (0.75 V), and a long‐term cycle stability (over 166 h) are achieved at 10 mA cm^?2.     

Trifunctional Single‐Atomic Ru Sites Enable Efficient Overall Water Splitting and Oxygen Reduction in Acidic Media

Development of cost‐effective, active trifunctional catalysts for acidic oxygen reduction (ORR) as well as hydrogen and oxygen evolution reactions (HER and OER, respectively) is highly desirable, albeit challenging. Herein, single‐atomic Ru sites anchored onto Ti₃C₂T_x MXene nanosheets are first reported to serve as trifunctional electrocatalysts for simultaneously catalyzing acidic HER, OER, and ORR. A half‐wave potential of 0.80 V for ORR and small overpotentials of 290 and 70 mV for OER and HER, respectively, at 10 mA cm^?2 are achieved. Hence, a low cell voltage of 1.56 V is required for the acidic overall water splitting. The maximum power density of an H₂–O₂ fuel cell using the as‐prepared catalyst can reach as high as 941 mW cm^?2. Theoretical calculations reveal that isolated Ru–O₂ sites can effectively optimize the adsorption of reactants/intermediates and lower the energy barriers for the potential‐determining steps, thereby accelerating the HER, ORR, and OER kinetics.     

Significant Enhancement of Water Splitting Activity of N‐Carbon Electrocatalyst by Trace Level Co Doping

Replacement of precious metal electrocatalysts with highly active and cost efficient alternatives for complete water splitting at low voltage has attracted a growing attention in recent years. Here, this study reports a carbon‐based composite co‐doped with nitrogen and trace amount of metallic cobalt (1 at%) as a bifunctional electrocatalyst for water splitting at low overpotential and high current density. An excellent electrochemical activity of the newly developed electrocatalyst originates from its graphitic nanostructure and highly active Co‐N_x sites. In the case of carefully optimized sample of this electrocatalyst, 10 mA cm^?2 current density can be achieved for two half reactions in alkaline solutions—hydrogen evolution reaction and oxygen evolution reaction—at low overpotentials of 220 and 350 mV, respectively, which are smaller than those previously reported for nonprecious metal and metal‐free counterparts. Based on the spectroscopic and electrochemical investigations, the newly identified Co‐N_x sites in the carbon framework are responsible for high electrocatalytic activity of the Co,N‐doped carbon. This study indicates that a trace level of the introduced Co into N‐doped carbon can significantly enhance its electrocatalytic activity toward water splitting.     

Defect Engineering toward Atomic Co–Nx–C in Hierarchical Graphene for Rechargeable Flexible Solid Zn‐Air Batteries

Rechargeable flexible solid Zn‐air battery, with a high theoretical energy density of 1086 Wh kg^?1, is among the most attractive energy technologies for future flexible and wearable electronics; nevertheless, the practical application is greatly hindered by the sluggish oxygen reduction reaction/oxygen evolution reaction (ORR/OER) kinetics on the air electrode. Precious metal‐free functionalized carbon materials are widely demonstrated as the most promising candidates, while it still lacks effective synthetic methodology to controllably synthesize carbocatalysts with targeted active sites. This work demonstrates the direct utilization of the intrinsic structural defects in nanocarbon to generate atomically dispersed Co–N_x–C active sites via defect engineering. As‐fabricated Co/N/O tri‐doped graphene catalysts with highly active sites and hierarchical porous scaffolds exhibit superior ORR/OER bifunctional activities and impressive applications in rechargeable Zn‐air batteries. Specifically, when integrated into a rechargeable and flexible solid Zn‐air battery, a high open‐circuit voltage of 1.44 V, a stable discharge voltage of 1.19 V, and a high energy efficiency of 63% at 1.0 mA cm^?2 are achieved even under bending. The defect engineering strategy provides a new concept and effective methodology for the full utilization of nanocarbon materials with various structural features and further development of advanced energy materials.     

Amorphous Intermediate Derivative from ZIF‐67 and Its Outstanding Electrocatalytic Activity

Increasing active sites is an effective method to enhance the catalytic activity of catalysts. Amorphous materials have attracted considerable attention in catalysis because of their abundant catalytic active sites. Herein, a series of derivatives is prepared via the low‐temperature heat treatment of ZIF‐67 hollow sphere at different temperatures. An intermediate product with an amorphous structure is formed during transformation from ZIF‐67 to Co₃O₄ nanocrystallines when ZIF‐67 hollow sphere is heat treated at 260 °C for 3 h. The chemical composition of the amorphous derivative is similar to that of ZIF‐67, and the carbon and nitrogen contents of the amorphous derivative are obviously higher than those of crystalline samples obtained at 270 °C or higher. As electrocatalysts for the oxygen evolution reaction (OER) and nonenzymatic glucose sensing, the amorphous derivative exhibits significantly better catalytic activity than crystalline Co₃O₄ samples. The amorphous sample as an OER catalyst has a low overpotential of 352 mV at 10 mA cm^?2. The amorphous sample as an enzyme‐free glucose sensing catalyst can provide a low detection limit of 3.9 × 10^?6 m and a high sensitivity of 1074.22 µA mM^?1 cm^?2.     

Novel MOF‐Derived Co@N‐C Bifunctional Catalysts for Highly Efficient Zn–Air Batteries and Water Splitting

Metal–organic frameworks (MOFs) and MOF‐derived materials have recently attracted considerable interest as alternatives to noble‐metal electrocatalysts. Herein, the rational design and synthesis of a new class of Co@N‐C materials (C‐MOF‐C2‐T) from a pair of enantiotopic chiral 3D MOFs by pyrolysis at temperature T is reported. The newly developed C‐MOF‐C2‐900 with a unique 3D hierarchical rodlike structure, consisting of homogeneously distributed cobalt nanoparticles encapsulated by partially graphitized N‐doped carbon rings along the rod length, exhibits higher electrocatalytic activities for oxygen reduction and oxygen evolution reactions (ORR and OER) than that of commercial Pt/C and RuO₂, respectively. Primary Zn–air batteries based on C‐MOF‐900 for the oxygen reduction reaction (ORR) operated at a discharge potential of 1.30 V with a specific capacity of 741 mA h g_Zn^–1 under 10 mA cm^–2. Rechargeable Zn–air batteries based on C‐MOF‐C2‐900 as an ORR and OER bifunctional catalyst exhibit initial charge and discharge potentials at 1.81 and 1.28 V (2 mA cm^–2), along with an excellent cycling stability with no increase in polarization even after 120 h – outperform their counterparts based on noble‐metal‐based air electrodes. The resultant rechargeable Zn–air batteries are used to efficiently power electrochemical water‐splitting systems, demonstrating promising potential as integrated green energy systems for practical applications.     

Biomass Derived N‐Doped Porous Carbon Supported Single Fe Atoms as Superior Electrocatalysts for Oxygen Reduction

Exploring sustainable and high‐performance electrocatalysts for the oxygen reduction reaction (ORR) is the crucial issue for the large‐scale application of fuel cell technology. A new strategy is demonstrated to utilize the biomass resource for the synthesis of N‐doped hierarchically porous carbon supported single‐atomic Fe (SA‐Fe/NHPC) electrocatalyst toward the ORR. Based on the confinement effect of porous carbon and high‐coordination natural iron source, SA‐Fe/NHPC, derived from the hemin‐adsorbed bio‐porphyra‐carbon by rapid heat‐treatment up to 800 °C, presents the atomic dispersion of Fe atoms in the N‐doped porous carbon. Compared with the molecular hemin and nanoparticle Fe samples, the as‐prepared SA‐Fe/NHPC exhibits a superior catalytic activity (E _1/2 = 0.87 V and J _k = 4.1 mA cm^?2, at 0.88 V), remarkable catalytic stability (≈1 mV negative shift of E _1/2, after 3000 potential cycles), and outstanding methanol‐tolerance, even much better than the state‐of‐the‐art Pt/C catalyst. The sustainable and effective strategy for utilizing biomass to achieve high‐performance single‐atom catalysts can also provide an opportunity for other catalytic applications in the atomic scale.     

Transition‐Metal‐Doped RuIr Bifunctional Nanocrystals for Overall Water Splitting in Acidic Environments

The establishment of electrocatalysts with bifunctionality for efficient oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) in acidic environments is necessary for the development of proton exchange membrane (PEM) water electrolyzers for the production of clean hydrogen fuel. RuIr alloy is considered to be a promising electrocatalyst because of its favorable OER performance and potential for HER. Here, the design of a bifunctional electrocatalyst with greatly boosted water‐splitting performance from doping RuIr alloy nanocrystals with transition metals that modify electronic structure and binding strength of reaction intermediates is reported. Significantly, Co‐RuIr results in small overpotentials of 235 mV for OER and 14 mV for HER (@ 10 mA cm^?2 current density) in 0.1 m HClO₄ media. Therefore a cell voltage of just 1.52 V is needed for overall water splitting to produce hydrogen and oxygen. More importantly, for a series of M‐RuIr (M = Co, Ni, Fe), the catalytic activity dependence at fundamental level on the chemical/valence states is used to establish a novel composition‐activity relationship. This permits new design principles for bifunctional electrocatalysts.     

Constructing Pure Phase Tungsten‐Based Bimetallic Carbide Nanosheet as an Efficient Bifunctional Electrocatalyst for Overall Water Splitting

Carbides are commonly regarded as efficient hydrogen evolution reaction (HER) catalysts, but their poor oxygen evolution reaction (OER) catalytic activities seriously limit their practical application in overall water splitting. Here, vertically aligned porous cobalt tungsten carbide nanosheet embedded in N‐doped carbon matrix (Co₆W₆C@NC) is successfully constructed on flexible carbon cloth (CC) as an efficient bifunctional electrocatalyst for overall water splitting via a facile metal–organic framework (MOF) derived method. The synergistic effect of Co and W atoms effectively tailors the electron state of carbide, optimizing the hydrogen‐binding energy. Thus Co₆W₆C@NC shows an enhanced HER performance with an overpotential of 59 mV at a current density of ?10 mA cm^?2. Besides, Co₆W₆C@NC easily in situ transforms into tungsten actived cobalt oxide/hydroxide during the OER process, serving as OER active species, which provides an excellent OER activity with an overpotential of 286 mV at a current density of ?10 mA cm^?2. The water splitting device, by applying Co₆W₆C@NC as both the cathode and anode, requires a low cell voltage of 1.585 V at 10 mA cm^?2 with the great stability in alkaline solution. This work provides a feasible strategy to fabricate bimetallic carbides and explores their possibility as bifunctional catalysts toward overall water splitting.     

Enhancing Oxygen Evolution Reaction through Modulating Electronic Structure of Trimetallic Electrocatalysts Derived from Metal–Organic Frameworks

The construction of efficient, durable, and non‐noble metal electrocatalysts for oxygen evolution reaction (OER) is of great value but challenging. Herein, a facile method is developed to synthesize a series of trimetallic (W/Co/Fe) metal–organic frameworks (MOFs)‐derived carbon nanoflakes (CNF) with various Fe content, and an Fe‐dependent volcano‐type plot can be drawn out for WCoFe_x ‐CNF. The optimized WCoFe_0.3‐CNF (when the feed ratio of Fe/Co is 0.3) demonstrates superior electrocatalytic performance with a low overpotential of only 254 mV@10 mA cm^?2 and excellent durability of 100 h. Further researches show that appropriate amount of iron doping can regulate the electronic structure, resulting in a favorable synergistic environment. This method may stimulate the exploration of electrocatalysts by utilizing MOFs as precursors while realizing electronic modulation by multimetal doping.     

Sustainable Synthesis of Co@NC Core Shell Nanostructures from Metal Organic Frameworks via Mechanochemical Coordination Self‐Assembly: An Efficient Electrocatalyst for Oxygen Reduction Reaction

Herein, a new type of cobalt encapsulated nitrogen‐doped carbon (Co@NC) nanostructure employing Zn_xCo_1?x(C₃H₄N₂) metal–organic framework (MOF) as precursor is developed, by a simple, ecofriendly, solvent‐free approach that utilizes a mechanochemical coordination self‐assembly strategy. Possible evolution of Zn_xCo_1?x(C₃H₄N₂) MOF structures and their conversion to Co@NC nanostructures is established from an X‐ray diffraction technique and transmission electron microscopy analysis, which reveal that MOF‐derived Co@NC core–shell nanostructures are well ordered and highly crystalline in nature. Co@NC–MOF core–shell nanostructures show excellent catalytic activity for the oxygen reduction reaction (ORR), with onset potential of 0.97 V and half‐wave potential of 0.88 V versus relative hydrogen electrode in alkaline electrolyte, and excellent durability with zero degradation after 5000 potential cycles; whereas under similar experimental conditions, the commonly utilized Pt/C electrocatalyst degrades. The Co@NC–MOF electrocatalyst also shows excellent tolerance to methanol, unlike the Pt/C electrocatalyst. X‐ray photoelectron spectroscopy (XPS) analysis shows the presence of ORR active pyridinic‐N and graphitic‐N species, along with CoN_x? C_y and Co? N_x ORR active (M–N–C) sites. Enhanced electron transfer kinetics from nitrogen‐doped carbon shell to core Co nanoparticles, the existence of M–N–C active sites, and protective NC shells are responsible for high ORR activity and durability of the Co@NC–MOF electrocatalyst.